Problem with import of AVi file

I have bought a cheap video camera Creative Vado. I can copy film file in AVI to my computer . I can see the file, but I can`t import it in iMovie. Can someone help me - I will be greatful!

first rule of using a forum: read recent topics !
http://forum.java.sun.com/thread.jspa?threadID=668488&tstart=0

Similar Messages

Problem with importing a AVI file

Hi everyone,
I did a capture to hard drive of a VHS home movie via Turtle Beach PCI card software, saving as .avi file that is roughly 2 hrs long, when I import into Premier Pro CS3, I only see the first 2 minutes. Anyone have a suggestions on what I can do to.
Thanks,
George

George,
I just finished a project, similar to yours and used the same hardware, TB PCI, and their software for the Capture. In my case, I chose AVI uncompressed and every file Imported into Premiere fine. Do you recall which CODEC you selected in the TB software. The only problem with AVI uncompressed is very, very large file sizes and I had 32 VHS tapes, some EP and some LP.
Quite a few folk on this forum have had excellent results with the Canopus products, but I already had the TB, so I did not change.
If G-Spot throws a fit, then you probably have a corrupt file. I assume that G-Spot installed OK, and the errors were with your AVI file. If not, try install again with all AV, Spyware, etc. software turned off. Try to Capture again with AVI uncompressed and see if your result is different.
Hunt

A problem with importing layered PSD file into Flash

Hi.
There's a problem with importing layered PSD file into Flash.
If I import a layered PSD file, some part the color of the lower layer is shown at the edge of objects or shadows. Instead, if I crop each layers first and import them, there's no problem.
If the higher layer has brush or transparent effects, it becomes worse.
Any help with this problem?
Thanks.

How was the original art created? Was the original RGB or CMYK? What is the resolution of the Photoshop file? Flash only works well with RGB and 72 pixel per inch resolution. If your original art is not set this way, then Flash will attempt to convert it as it imports it. Flash uses the sRGB color space. You'll get the best color translation if your Photoshop file is using this color preference.

Problems with import of static files/images

I have a series of static files (such as jquery/jquery ui libraries) that we have been storing in WORKSPACE_IMAGES. We had hoped to be able to export the static files and use our automated build process to import the files via sqlplus. However, I have run into problems with the files being "corrupted"...either they don't show up at all in firebug, or one file contains parts of another file, rendering it useless. If I delete these files and re-upload them separately through the builder, then I don't have any problems.
I can only assume there is some perhaps special character or some other issue that I'm not aware of either during the export process or the import process.
My first preference would be to store these files on the app server, but unfortunately that's not on the table at the moment.
Any ideas what would be causing the issues here?
Any help would be appreciated.
Thanks in advance
Jeff

Hello all,
This is an old thread, but it's an old problem that I'm concerned may still be continuing.
We're moving from 3.2 to 4.1. While copying our applications from 3.2 to a test 4.1 installation, we did a static file export for "All static files" from 3.2 and did an import to 4.1. We're seeing the same behavior that I and others have reported in the past - any static files that are javascript are corrupted when "all static files" was chosen. Exporting/importing each javascript static file individually appears to work fine.
If the bug was in 3.2 in that it was generating a corrupted export file when "all static files" is chosen, then I'm not concerned - we're moving from 3.2 anyway. But, if the issue is in the import then it must still exist in 4.1 and that would be a concern.
Does anyone know if this was a recognized bug in 3.2 and has since been corrected?
Thanks!
John

CS5.5 Extended - problem with importing audio .mov files

I would like to import an audio file to my PS5.5 Extended. It supports .mov files, so I tried to File->Place a mov file exported from Audition CS5.5. But Photoshop says: "Could not place the document xxx.mov because the movie file could not be opened."
The mov file doesn't open in Windows Media Player either and the message is that the codec is unknown. But it opens without problems in QuickTime, as audio.
I am not sure if this is Audition or Photoshop problem, but the format, or codec which is used should be common to both programs, as they are from the same CS5.5 suite. By the way, I have all settings set to default in Audition. No idea what codec it is using.
My purpose is to import sound, and because PS Ext does not support sound files as such, I found a workaround in the internet to import a mov file. But it does not work for me..

Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainfo.massanti.com/
Do you have Quicktime installed?

Problems with Import a excel file?

Folks,
I created a form to upload a excel file, the upload works fine , but I have a problem with the first line of the excel file. I created a model with the column names, the headers. When I uploaded this excel file to a folder inside my CF server, the first line is inserted in my DB, how fix this problem?
Tks
Fabiano Magno Pechibella

You've said you have a problem. You haven't said what the problem is.

Problem with importing a dmp file

Hello,
I am trying to import a dmp file to make an excercise.
I've tried and read manuals all day now, but it seems I still do something wrong
First, In the Enterprise Manager console, I create a new user (CREATE LIKE scott):
<img src="http://users.skynet.be/wouterjans/orcl/oracle03.JPG">
Then I create a new Table: dummy with 2 fields: A en B (varchar2 and size10)
<img src="http://users.skynet.be/wouterjans/orcl/oracle04.JPG">
After that, grant dba to the new user
grant dba to DEMO;Then I Run CMD and go to the c:\oracle\ora92\BIN folder
<img src="http://users.skynet.be/wouterjans/orcl/oracle01.JPG">
I import the dmp file (STAG3536.dmp)
and it says it succeed
<img src="http://users.skynet.be/wouterjans/orcl/oracle02.JPG">
So normally its ok
Then I go to my Form builder and I open a new Form
When I try to run the data wizard now. I only see the "dummy" record I created before but I dont see the database from my imported file.
<img src="http://users.skynet.be/wouterjans/orcl/oracle05.JPG">
Could anyone help me pls ??
Thanks in advance,
Wouter
Message was edited by:
wouter81

dont go in bin directory you can run imp cmd from any where
if you want to import in scott scheme
you do this
connect system/password@dbname
list of contents = n
import grant = y
import table= y
import entire export file = n
user = scott
check to this i hope you will success.
Rgds

Problem with audio on avi file

Hi all. I am using Premiere CS 5.5. I work on Windows 7 64bit. I have an AVI file recorded from a game but when i try to drag and drop it from the list to the timeline, only video appears. Nothing on audio track bellow. The strange thing is that when i press to play, video has sound in it. Am i doing something wrong???
Thank you!!!

no matter if i do or not audio still remains empty.
here's a screenshot i took.

Problem with importing a scrolling file

Hello, I hope you could help me because i am really stuck
into it:
I have a scroll file, taken from a tutorial, which is linked
to a class. After having customized my file I did try it and it
works fine. The problem is starting when I try to import this file
to an empty MCL in my website. When I have imported all the
elements they do not respond and act like single pieces (es. the
scroll bar is detached from the scroller). What can I do? I am
attaching all the codes and I hope you can help me .
Googling around i found the element that I think it is the
reason I cannot import a proper classed swf.
The function is Event.ADDED_TO_STAGE. the only major thing is
that I do not know how to change my loader class to contain this
missing bit.
thank you so much
p.s all the classes and the file are in the same
directory

I get this code when I preview the fiel I hope that is what
you meant:
openHandler: [Event type="open" bubbles=false
cancelable=false eventPhase=2]
progressHandler: bytesLoaded=0 bytesTotal=896446
progressHandler: bytesLoaded=65536 bytesTotal=896446
progressHandler: bytesLoaded=131072 bytesTotal=896446
progressHandler: bytesLoaded=196608 bytesTotal=896446
progressHandler: bytesLoaded=262144 bytesTotal=896446
progressHandler: bytesLoaded=327680 bytesTotal=896446
progressHandler: bytesLoaded=393216 bytesTotal=896446
progressHandler: bytesLoaded=458752 bytesTotal=896446
progressHandler: bytesLoaded=524288 bytesTotal=896446
progressHandler: bytesLoaded=589824 bytesTotal=896446
progressHandler: bytesLoaded=655360 bytesTotal=896446
progressHandler: bytesLoaded=720896 bytesTotal=896446
progressHandler: bytesLoaded=786432 bytesTotal=896446
progressHandler: bytesLoaded=851968 bytesTotal=896446
progressHandler: bytesLoaded=896446 bytesTotal=896446
TypeError: Error #1009: Cannot access a property or method of
a null object reference.
at Scrollbar$iinit()
at
flash.display::Sprite/flash.display:Sprite::constructChildren()
at flash.display::Sprite$iinit()
at flash.display::MovieClip$iinit()
at tee_fla::MainTimeline$iinit()
TypeError: Error #1009: Cannot access a property or method of
a null object reference.
at tee_fla::MainTimeline/tee_fla::frame1()
initHandler: [Event type="init" bubbles=false
cancelable=false eventPhase=2]
httpStatusHandler: [HTTPStatusEvent type="httpStatus"
bubbles=false cancelable=false eventPhase=2 status=0]
completeHandler: [Event type="complete" bubbles=false
cancelable=false eventPhase=2]
[object Stage]
thank you so much

Sudden problems with importing/editing audio files

I podcast my lectures, which run about 1 hr 15 mins. My SOP was to drag and drop an mp3 or AAC version of the original audio capture into Garageband and then split the file into two separate podcast episodes. Since the big Apple Software upgrade, however, this procedure doesn't seem to work. The file imports and plays, but I can no longer split it into multiple regions (it also shows a flat line for the entire track). Any ideas?

I am having the same problem. Looking for a fix and will post as soon as possible. This all happened after the new software update.
M

Canon IXUS 950 won't import large AVI files into iPhoto

The new canon Ixus 950 IS wont import large (over 50mb) AVI files in iPhoto, why not?
They sit on the SD card and then sometimes subsequent pics and video's don't upload.
If there are say, 3 x 40mb files they dont upload either... After waiting ages the box pops up, unable to import.
I can individually import the AVI files under 50mb
I also note that the hard drive icon for the camera does not appear on the desktop or the finder so I could not 'drag' them in either...
Any ideas?
David

I have a similar problem with importing large AVIs from my Canon A610. iPhoto would import everything else (usually) except the large AVIs, which it claims is unreadable. In this particular case (~470MB file), it plays in QuickTime, I've resaved it using QT (still won't import) and converted it from MJPEG to Cinepak (still won't import). I'm now considering cutting the AVI up into smaller chunks and importing those... but any other options before that?
Misc computer details: Main HD is 120GB with 30 for Boot Camp, 80 remains for Mac OS X, but the iPhoto Library is on an external HD (also 120GB, same model as internal HD except not SATA) formatted to FAT32. Would 10.4.11 make a difference here?

Tempo problems with imported wav files

Hey everyone, sorry if there's a quick fix for this in the forums that I couldn't find, but I've been having some tempo problems with imported .wav files.
Long story short, my system couldn't handle playing all the tracks for a song while recording drums, so I bounced out an mp3 of the song and put it in a new Logic file so my drummer could just play along to that as I recorded him. Unfortunately, the original song is at 167 bpm, but I forgot to change the bpm in the new Logic file with the .mp3 file of the song to 167 bpm, so it was left at the default 120 bpm.
So, the drums were recorded at the correct 167 bpm, but Logic thinks that those new drum .wav files should be played at 120 bpm, so when I import my drum tracks back into the original file, they do not play correctly at all.
I could get record it all again, but I wanted to check if there was a way I could salvage what I already have, since my drummer lives about an hour away right now and can't just come over whenever he wants.
Thanks for the help! I really appreciate it.

Hi,
First, do not use MP3 in Logic, the sound quality is less than AIFF, WAV or CAF, and Logic has to decode it for playback, making it a heavier burden on the CPU than an uncoded audiofile, such as AIFF, WAV or CAF.
Secondly, audio files are independent of Logic's tempo. If you bounce down an audio file in any format (other than Apple Loop), it will play back at the same speed, +regardless of Logics' tempo setting+, either at recording or playback. Logic doesn't 'think' anything. The BPM is only important to MIDI tracks, or to the spacing between audio files. The audio files themselves *are not affected* by the tempo setting. If you import an audio file of tempo 167 into a 120 BPM project, the file will still play at 167, only Logic will indicate the wrong bar positions.
regards, Erik.

Problem with import file type setting

Problem with import file type settings - In preferences>general I select "wav encoder" But then going to tools>Create it still says "create mp3 version".
Can't find a way to overcome this. Thanks for any help.

Doublechecking, roy. After making the preferences change, are you leaving the General tab by clicking the OK button down the bottom-right-hand corner of the tab?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

haben
From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
presets there for the QuickTime choice there.
What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30) or something else? Do you know if this camera is recording with a variable or
a constant frame rate?
Please review and consider and then we will decide what next.
Thank you.
ATR

Import DV AVI Files with 5.1 Audio

To my surprise, Encore would not import DV AVI files from Premiere with 5.1 Audio. I much prefer to do my transcoding in Encore rather than in Premiere so I don't have to guess how much disk space will remain after menus and other content. Also, I think Encore transcoding is more efficient than Premiere.
Yet, cheaper and less sophisticated applications such as Nerovision will import DV AVI files with 5.1 audio, and give you 5.1 DVD's.
Which leads to another question, why does a cheaper application just give you the Dolby Digital 5.1 Audio, while a fee has to be paid to Surcode to get it in the Adobe applications?

You cannot create a 5.1 Dolby Digital file in Encore, so the answer is an emphatic "YES" to the planning & budgeting.
You really should be doing this anyway, as it is a real eye opener. There are some superb Excel spreadsheet bit budgeting tools, as well as a simple enough manual method. It should be detailed in the FAQ.
As far as DTS goes, you'll need an encoder again. The only plugin version I am aware of is for Steinberg's Nuendo & Cubase systems, but both DTS and SurCode make them.
The SurCode DTS-DVD encoder is dated now - 5 years or so - and the Nuendo one sounds better. Having said that, the DTS-PSE sounds even better, as well as having DTS-ES and DTS 96/24 capability (both of which are DVD Legal).
Even better are the soon-to-be-released DTS-HD SAS & MAS encoders.
These are primarily for the Blue-ish type discs, but also cater for so-called "legacy" encoding as well, and the detail is even better than the DTS-PSE version. You can hear the difference in the detail where the top end sounds more natural & open. Whatever version you get will make Dobly Dirgital sound dull & muddy by comparison.
Quality can be improved by feeding the encoder with 24 bit audio too - this also applies to Dolby Digital.
Bitrates for DTS are either 754 kb/sec or 1509 kb/sec, and come in 2 flavours:
Compact (.cpt) and Padded (.dts) - either can use the lower bitrate, and there is no difference in audio quality between the CPT and DTS flavours. I recommend using the higher bitrate personally.
Both types are supported in Passthrough mode in Encore - that is to say they import, and multiplex correctly but cannot be previewed.
Hope this helps.

Problem with import of AVi file

Similar Messages

Maybe you are looking for