Problem with import of certificate for SSO into backend

Hi all gurus!
I'm trying to set up SSO (Single Sign On) between a customers portal and their backend system but have run into a problem I never have had to tamper with before. The customer has an CUA (Central User Administration) with SolMan (Solution Manager) as the central system and a R3 system as one of the children.
The system Connection I have created is against the R3 system and here are my questions:
Into what system shall I import the logon certificate I have exported from the portal, into SolMan or into R3?
Do I have to restart the system after the import of the certificate into the proper system?
Best regards
Benny

<b>Into what system shall I import the logon certificate I have exported from the portal, into SolMan or into R3?</b>
The certificate has to be imported to the R3 System.
<b>Do I have to restart the system after the import of the certificate into the proper system?</b>
Once you are done with the import, you need to make sure that you click Add to ACL, to add the Portal Server to the ACL list. Then as mentioned by Martin, you need to set the profile parameters login/accept_sso2_ticket to the value 1 and if the application server should also be able to create logon tickets, set the profile parameter login/create_sso2_ticket to the value 1 or 2. <b>Then restart the R3 System.</b>
Refer to for further information on SSO :
http://help.sap.com/saphelp_erp2005vp/helpdata/en/89/6eb8deaf2f11d5993700508b6b8b11/content.htm
Hope that helps.
Regards,
Sunil

Similar Messages

  • I just stared having problems with importing files from nikon D810 into LR 5.7 it pop a window saying it can not read files on working on a imac 27" running yosemite on my mac pro after a few times it finally was able to read files and import them into LR

    I just stared having problems with importing files from nikon D810 into LR 5.7 it pop a window saying it can not read files on working on a imac 27" running yosemite on my mac pro after a few times it finally was able to read files and import them into LR I never had this problem before was there some kind of update that could of cause this?

  • Error occuring during import of certificate for SSO configuring in BI

    Hi,
    I am configuring the SSO with logon ticket for BI system.
    I downloaded the certificate from portal server.
    But while importing this certificate on R/3 server it shows error
    "Error occurred during import"
    Message no. TRUST008
    Please suggest me any solution on it.
    Thanks & Regards,
    Vishal.

    Hi Vishal,
    Probably the certificate already exists - see https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0077873d-0b01-0010-1abb-cfbf21d1aa43 page 4.
    Hope it helps
    Detlev

  • Problem with "Import"; Trying to move song into FCE

    The answer may be deceptively simple, but it eludes me.
    In the past I merely dragged/dropped a song from my iTunes folder into FCE to begin my project. The only files I have chosen to date were mp3 files. There was no problem encountered whatsoever.
    Today, the song I chose is not allowed into FCE and the only correlation is that I purchased the song in the iTunes music store and it has an extension of m4a. There error message: "File error: unknown file"
    What am I missing?

    Thank you, Tom. Very helpful and I do believe my problem will be solved. However, what makes this a bit of head scratcher for me is that I tested an "import" with another song that I purchased from iTunes music store with no problems.
    I don't expect you to know, so thank you so much for the link. I will attempt the workaround right now

  • I am having a problem with importing cd's

    hi, I am having a problem with importing my music cd's into iTunes when I put a cd into my cd drive. The wrong information about the music cd comes up iTunes thinks that I still have the cd in the drive that I imported before. all my other cd's import fine it is just a problem with this one disc. Has this happened to anyone else? Does anyone have any suggestions on how I can fix this ?
    Thanks,
    lizabler
    Fifth Generation iPod 30 GB   Windows XP  

    I am having the same problems on multiple CD...i import 1...goes ok...then when I import the new CD it say "Would you like to import "name of CD I just imported"...can't get it to read the cd title correctly..just keeps throwing up the last CD. Reboot has no effect on this problem.
    Thanks.

  • Problem with importing images into time lapse

    Hi
    I am having problems with importing still images into a time lapse sequence in photoshop and would appreciate any suggestions!
    I want to create a time lapse using a sequence of still photographs.  All file names are sequentially name/numbered. 
    I am using the Motion workspace, and have followed all of the instructions available. 
    Create correct sized new document (film & video).
    Create video timeline.
    Set frame rate.
    Choose 'create new video layer from file'.
    Point to first image in the folder where the images are stored.
    At this point, no matter what I have tried, I receive this error:
    I have tried different sized new documents; tried jpegs and tiffs; tried different frame rates, tried different qualities and sizes of images; tried selecting the last image instead of the first (one recommendation).
    If I use the 'Place' command from the file menu (and check the 'image sequence' box) instead of selecting 'Create new video layer' from the layers panel, it loads fine and I can still render the video.
    It took me most of a day to discover this workaround, but every other reasonable 'how-to' that I can find says that I should be able to do it by opening files into a new video layer and it seems as though the new video layer option may give me more alternatives.
    Anyone have any idea why I could be having these problems?
    I have reset Photoshop, deleted the settings file, even reinstalled it.  I use 64-bit on windows 7 and even installed the 32-bit to try that, but all with the same result.
    Stuart

    Unfortunately, yes--I've tried it that way over and over, and every other way I could think of.  The files are all in one folder, and I've converted the raw files to both tiffs and jpegs.  I even tried converting them to jpegs at the final pixel dimensions.  Each folder that I have used only contains one type of file, and they are all part of the same sequence and sequentially numbered.  I have even tried renumbering the files with numbers first, numbers last, numbers only, moving underscores.  I moved the files from my external hard-drive to the desktop ... I have a lot less hair than I had only a few days ago!
    I've looked at a few other tutorials that outline the same sequence of steps, and tried them over and over, and then changing one step at a time to make sure that it was not a single step that caused the problem.
    The thing that is really bugging me is that it works fine if I use the different approach of using the place command instead. 
    Anyway, thanks for all of your time.  It's going to be a lot simpler to just stick with 'place' command and I will likely do that, but I tend take things like this as a challenge.  I like to know WHY it won't work for me.  Sometimes it seems that there is just no logical explanation!
    Stuart

  • Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

    Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

    haben
    From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
    A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
    Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
    User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
    presets there for the QuickTime choice there.
    What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30)  or something else? Do you know if this camera is recording with a variable or
    a constant frame rate?
    Please review and consider and then we will decide what next.
    Thank you.
    ATR

  • A problem with importing layered PSD file into Flash

    Hi.
    There's a problem with importing layered PSD file into Flash.
    If I import a layered PSD file, some part the color of the lower layer is shown at the edge of objects or shadows. Instead, if I crop each layers first and import them, there's no problem.
    If the higher layer has brush or transparent effects, it becomes worse.
    Any help with this problem?
    Thanks.

    How was the original art created? Was the original RGB or CMYK? What is the resolution of the Photoshop file? Flash only works well with RGB and 72 pixel per inch resolution. If your original art is not set this way, then Flash will attempt to convert it as it imports it. Flash uses the sRGB color space. You'll get the best color translation if your Photoshop file is using this color preference.

  • Problems with importing images into Lightroom cc

    Problems with importing images into Lightroom cc
    I have installed lightroom cc and having trouble imortera images from my Canon 1DX.
    Lightroom starting the capture, but then nothing happens more, if I turn off the camera, I get error message photo 100-200 could not be loaded.
    Now I have left lightroom 5 and where the input port works fine.
    What happened to the upgrade from Lightroom 5 to lightroom cc?
    The camera has the latest software.

    I've now tested in various ways.
    First, I have images on both memory cards in the camera.
    Test1) Selects Not all of the photos in the camera at the input port bearings, it seems to work fine.
    Test 2) selects all cards in the camera and then get the following, Lightroom starts inportera short but stops and nothing happens (Fig.1).
    I turn the camera off after a while and get the next meddelnade (picture 1)
    Which can be translated:
    "The following files were not imported because they could not read (351)
    Property 1-100
    etc. "
    Picture 1.
    Picture 2

  • HT1567 GOOD DAY I JUST WANNA ASK IF,, WHAT IS THE POSSIBLE THING FOR ME TO DO IF MY IPOD 2ND GEN HAS A PROBLEM WITH THE BACKLIGHT,,, IT ALWAYS TURNS INTO DIM WHEN I USE IT ,,, BUT SOMETIMES IT WORKS JUST FINE,,, PLS TELL ME WHAT TO DO,, THANKS AND MORE PO

    GOOD DAY I JUST WANNA ASK IF,, WHAT IS THE POSSIBLE THING FOR ME TO DO IF MY IPOD 2ND GEN HAS A PROBLEM WITH THE BACKLIGHT,,, IT ALWAYS TURNS INTO DIM WHEN I USE IT ,,, BUT SOMETIMES IT WORKS JUST FINE,,, PLS TELL ME WHAT TO DO,, THANKS AND MORE POWER

    Please don't shout.
    Has the unit EVER been jailbroke?  Has it EVER been dropped?  Did it EVER get excessively wet?  Did you EVER load a pirated developer's version of the IOS?
    If "No" to all the above, first try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore and you have IOS-6 or lower, go into Recovery Mode per the instructions here.  Also, if you have IOS-7, read this.

  • Tempo problems with imported wav files

    Hey everyone, sorry if there's a quick fix for this in the forums that I couldn't find, but I've been having some tempo problems with imported .wav files.
    Long story short, my system couldn't handle playing all the tracks for a song while recording drums, so I bounced out an mp3 of the song and put it in a new Logic file so my drummer could just play along to that as I recorded him. Unfortunately, the original song is at 167 bpm, but I forgot to change the bpm in the new Logic file with the .mp3 file of the song to 167 bpm, so it was left at the default 120 bpm.
    So, the drums were recorded at the correct 167 bpm, but Logic thinks that those new drum .wav files should be played at 120 bpm, so when I import my drum tracks back into the original file, they do not play correctly at all.
    I could get record it all again, but I wanted to check if there was a way I could salvage what I already have, since my drummer lives about an hour away right now and can't just come over whenever he wants.
    Thanks for the help! I really appreciate it.

    Hi,
    First, do not use MP3 in Logic, the sound quality is less than AIFF, WAV or CAF, and Logic has to decode it for playback, making it a heavier burden on the CPU than an uncoded audiofile, such as AIFF, WAV or CAF.
    Secondly, audio files are independent of Logic's tempo. If you bounce down an audio file in any format (other than Apple Loop), it will play back at the same speed, +regardless of Logics' tempo setting+, either at recording or playback. Logic doesn't 'think' anything. The BPM is only important to MIDI tracks, or to the spacing between audio files. The audio files themselves *are not affected* by the tempo setting. If you import an audio file of tempo 167 into a 120 BPM project, the file will still play at 167, only Logic will indicate the wrong bar positions.
    regards, Erik.

  • Problem with importing

    Hi all, I recently downloaded elements 11, and I imported some photos okay, but now it starts to import, gets about half way, and a box saying elements organizer has stopped working. When I went into problem details, it said appcrash. any ideas wot be goin on. (Im importing photos in raw) Regards. Paul.

    Thanks for the reply jon. I was only importing 152 pics. off my nikon camera. I re downloaded elements 7 on to the puter, and they went straight on there with no trouble, so I would of thought they would go straight on to elmnts. 11. ho hum.and strange.
    Date: Fri, 18 Jan 2013 04:58:39 -0700
    From: [email protected]
    To: [email protected]
    Subject: Problem with importing
        Re: Problem with importing
        created by 99jon in Photoshop Elements - View the full discussion
    Hi Paul  What are your system specs. Raw files are usually quite large so the process could be draining your memory (RAM). Are you importing from camera or from your hard drive. In the case of the latter try importing one folder at a time or in smaller batches. You can select files and drag and drop into the organizer. You must drop on the dark gray area between the left and right side panels (if both panel are visible).
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5003831#5003831
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5003831#5003831
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5003831#5003831. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Photoshop Elements by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Hi Guys, I have a problem with Importing Pictures onto my Mac mini with Lion installed by using a Card Reader, What is the problem here so I can get Pictures onto my Computer. ,

    Hi Guys,
    I have a problem with Importing Pictures onto my Mac mini with Lion installed by using a Card Reader,
    What is the problem here so I can get Pictures onto my Computer. ,

    Hi Noob Søren
    There are a few things that are confusing in your question.
    As far as I know, you dont have to install Time Machine on this OS as it is already installed for you. You only need to connect a hard drive to your computer via firewire or usb, click on the Time Machine icon, Open Time Machine Preference in the drop down menu and select a disk: your connected hard drive.
    You can of course reformat this connected device, partition it into a few volumes to organise data if you so wish.
    I find it strange that your mac's hard drive is divided into two volumes... perhaps this was created through bootcamp?
    You can access the configuration of your hd through Applications/Utilities/Disk Utilities.
    Clicking on one of the icons on the right hand panel will bring the details of the contents of your hardDrive and volumes. From there you can decide to erase a partition, reformat etc....
    If your hd contains more than one volume, and one of them is empty, you could decide to remove it. Back up all your important data before doing so.
    Hope this helps
    WN

  • Problems with importing text messages from PC Suit...

    Problems with importing text messages from PC Suit 7.1.18.0 to my Nokia 5800
     I am trying to import a csv file that contains text messages (Note that this file was created using PC Suit 7.1.18.0) to a subfolder that I have created to My Folders but PC Suits only imports the text messages to the Draft folder. Note that initially it shows that the messages are import in the correct folder but after a refresh it shows them in the Draft Folder. Is their any setting that I should change in the PC Suit or the phone? My computer runs on Windows XP Service Pack 3 and the Nokia 5800 was upgraded to the latest firmware v20.0.012
     Thanks for your help

    Most phones only allows importing of draft and archived box for SMS.
    To do a restoring, you need to backup the SMS as a .nbu file using PC Suite and restore later.
    If you got an SD card, you can also do a backup on the SD Card (backup.arc) then restore later (reset and restore: backup.arc and mmc).
    What's the law of the jungle?

  • Problem with "SELECT...FOR UPDATE OF..." and "POST command" combination

    Problem with "SELECT...FOR UPDATE OF..." and "POST command" combination
    Problem in committing transactions in Multiple Forms (Oracle Forms) with POST built-in command:
    Consider that the following statements are written in WHEN-WINDOW-CLOSED trigger of a called form.
    Statements in called form (Form name: FORM_CHILD):
    go_block('display_block') ;
    do_key('execute_query') ;
    -- Data from table_b will be populated in this block, based on the value of COLUMN_1 obtained
    -- from TABLE_A.
    -- Example: If the value of COLUMN_1 is 10, then all the matching records from TABLE_B, which
    -- are inserted with value 10 in TABLE_B.COLUMN_1 will be fetched and shown here.
    if user_choice = 'YES' then
    commit ;
    else
    rollback ;
    end if ;
    Statements in calling forms:
    There are two calling forms having following statements and it is going to call the above said called form.
    CALLING FORM 1
    Statements in KEY-COMMIT trigger:
    post;
    call_form(form_child, no_activate) ;
    Statements in ON-INSERT trigger:
    select column_1
    from table_a
    for update of column_1
    where column_2 = 'X' ;
    update table_a
    set column_1 = column_1 + 1
    where column_2 = 'X' ;
    insert into table_b ...;
    insert into table_b ...; Statements in KEY-COMMIT trigger:
    post;
    call_form(form_child, no_activate) ;
    CALLING FORM 2:
    Statements in ON-INSERT trigger:
    select column_1
    from table_a
    for update of column_1
    where column_2 = 'X' ;
    update table_a
    set column_1 = column_1 + 1
    where column_2 = 'X' ;
    insert into table_b ...;
    insert into table_b ...;
    insert into table_b ...;
    Our understanding:
    Assume that both the forms are running from two different machines/instances, issuing commit at the same time. In this case, forms will start executing the statements written in ON-INSERT trigger, the moment POST command is executed. Though the commit is issued at the same time, according to oracle, only one of the request will be taken for processing first. Assume that calling form 1 is getting processed first.
    So, it fetches the value available in COLUMN_1 of TABLE_A and locks the row from further select, update, etc. as SELECT...FOR UPDATE command is used (note that NOWAIT is not given, hence the lock will be released only when COMMIT or ROLLBACK happens) and proceed executing further INSERT statements. Because of the lock provided by the SELECT...FOR UPDATE command, the statements in calling form 2 will wait for the resource.
    After executing the INSERT statements, the FORM_CHILD is called. The rows inserted in to TABLE_A will be queried and shown. The database changes will be committed when user closes the window (as COMMIT is issued in its WHEN-WINDOW-CLOSED trigger). Then the SELECT...FOR UPDATE lock will be released and calling form 2's statements will be executed.
    Actual happenings or Mis-behavior:
    Calling form 2 starts executing INSERT statements instead of waiting for SELECT...FOR UPDATE lock. Also, the value selected from TABLE_A.COLUMN_1 is same in both the calling forms, which is wrong.
    The rows inserted into TABLE_B are having similar COLUMN_1 values in calling form 2 and they are fetched and shown in the called form FORM_CHILD.
    Note that in calling form 2 also POST only is issued, but the changes posted there are accessible in calling form 1 also, which is wrong.
    Kindly suggest us as to how to fix above problem. It will be much use, if you can send us the information regarding the behavior of Oracle Forms POST built-in also.
    Our mail ID: [email protected]
    Thanks a lot in advance.

    You have several problems:
    1. On-Insert will ONLY run if you have created a new record in a base-table block. If you haven't done that, then the POST command will not cause it to run.
    2. Select for update without a "no wait" will lock records for the first form, but when the second form tries this, it will hit the ORA-00054 exception, and will NOT wait. The only way you could make it wait is to issue an UPDATE sql command, which is not such a good way to go.
    All POST does is issues SQL insert or update commands for any changes the user has made to records in a form's base-table blocks, without following with a Commit command.
    Also understand that Commit is the same as Commit_Form, and Rollback is the same as Clear_Form. You should read up on these in the Forms help topics.

Maybe you are looking for