Problem with import of Large table

I am having a problem while trying to import a table with 4M rows,
i am getting a thread 1 cannot allocate new log ....
i know this has to do with my redologs, but isn't there any way that i can do complete this
without getting this error... is there any way to import specific rows from a dump file
thanks.

Hello Mark Rennel Barrios ,
As I already told you It is possible. For Table maintanence transaction use the Report Module pool program and use the Function module "VIEW_MAINTENANCE_CALL " by passing the proper attributes so that the Table maintenance will come in the display only mode. During the launch of the Table maintenance screen we can popup a information saying "a dialog maintenace should pop up to say that LANDX should be maintained and it should look in table T005T for its values where LAND1 = LAND1 of the custome table created".
Hope this answers your question.
Please kindly close your previous thread on the same issue .
Thanks,
Greetson

Similar Messages

Problem with importing a large number of images to Lightroom?

I'm trying to import a large number of images from disk to Lightroom. If I select more that approximately 1500 images (1250 works fine), I get an error message saying "files do not exist". If I reduce the number of files imported, everything works fine. I can import in groups as long as the number selected at any one time is less that the ~1500 limit.
Has any one had a similar problems? I'm running LR 2.4 64-bit on Win7 RC 64-bit, Q6600 processor, 8 GB RAM.
Does not seem like this should be a problem. Its a real hassle to my workflow. I'm working on a series of time-laps movies (here is a link to a sample: http://vimeo.com/6375019).

Thanks for your reply Sean,
It is an internal disk drive, SATA II interface.I have no other disk/file problems, this is unique to LR as far as I can tell.
I'm loading files onto disk from a CF card reader outside of Lightroom, then opening LR and telling it to import from disk. I've never had a problem before with imports. Experimenting with number of files, somewhere between 1250 and 1500 is where the problem occurs.
Been busy making time-lapse videos of the fire in LA, so I'm away from the computer most of the time.
thanks,
Dan Finnerty

Problem with import of split tables.

We are creating copy of our production system. The
system copy has a change of Operating system from HP-UX to Windows
X86_64 and is also has unicode conversion. We followed the following
steps:
1) Performed post copy steps and pre-unicode conversion steps
2) Split big tables using OSS note 1043380 - Efficient Table Splitting
for Oracle Databases
3) Copied *.WHR files to export directory and performed export using SAPinst
4) Copied files export dump to new server.
5) Created whr.txt manually and copied it to the DATA directory of
export dump
6) Started import using SAPinst
Surprisingly the import does not consider the split tables but marks
them as complete in the TSK files. Also the rows imported is 0 for
those tables.
The only error is:
(RFF) ERROR: no entry for table "CDCLS" in "F:\export\ABAP\DATA\CDCLS-1.TOC"
(IMP) INFO: import of CDCLS completed (0 rows) #20110122022015
Why is SAPinst not importing the tables that are split. All table that were not split are importing successfully and R3load is patched.

Resolved.
this is a known issue which is due to the sql splitter tool which
generates space characters at the end of the 'where' clause within the
TSK-file.
At the import that leads to the fact that the entries are not
recognized and nothing is imported, so in the import log you get
no entry for table "BALDAT" in "F:\ccpexport\CCP\ABAP\DATA\BALDAT-1.TOC"
As a workarround I would like you to apply the following:
1. remove all blank characters at the end of the WHR clause in the TSK
-file, that is i.e.:
D BALDAT I ok
WHERE ("LOG_HANDLE" < '4iLKIlCIjLpX0000p5bqa0')__ <-- I have marked the
two blank characters at the end of the line by '_'
remove this characters, so that the thera are no blanks at the end of
the line
2. set the status in the corresponding TSK-file from 'ok' to 'err'
3. repeat the import of the corresponding packages
I would like to mention that as per note # 1043380 you should use
both for the export and import:
R3load 7.00 version built newer than June 18th, 2008
- where this issue should be fixed.

Problem with importing

Hi all, I recently downloaded elements 11, and I imported some photos okay, but now it starts to import, gets about half way, and a box saying elements organizer has stopped working. When I went into problem details, it said appcrash. any ideas wot be goin on. (Im importing photos in raw) Regards. Paul.

Thanks for the reply jon. I was only importing 152 pics. off my nikon camera. I re downloaded elements 7 on to the puter, and they went straight on there with no trouble, so I would of thought they would go straight on to elmnts. 11. ho hum.and strange.
Date: Fri, 18 Jan 2013 04:58:39 -0700
From: [email protected]
To: [email protected]
Subject: Problem with importing
    Re: Problem with importing
    created by 99jon in Photoshop Elements - View the full discussion
Hi Paul What are your system specs. Raw files are usually quite large so the process could be draining your memory (RAM). Are you importing from camera or from your hard drive. In the case of the latter try importing one folder at a time or in smaller batches. You can select files and drag and drop into the organizer. You must drop on the dark gray area between the left and right side panels (if both panel are visible).
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5003831#5003831
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5003831#5003831
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5003831#5003831. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Problems with import from textfile

Hi
We are experiencing problems with importing tables from a text-file. We are using Designer 6i (NT) release 2.
Some of the column sequences are lost others are changed.
Foreign keys are lost if the referenced table is after in alphbetical order! Not null columns are nullified and the column of the primary key definition is lost.
Has anyone had similar problems and/or know of a workaround?

Hi
We are experiencing problems with importing tables from a text-file. We are using Designer 6i (NT) release 2.
Some of the column sequences are lost others are changed.
Foreign keys are lost if the referenced table is after in alphbetical order! Not null columns are nullified and the column of the primary key definition is lost.
Has anyone had similar problems and/or know of a workaround?

Problems with importing .dmp file (CLOB)

dear all
i am using oracle 10g XE
I am facing a problem with importing dmp ( one of my table contains clob coloum)
below mentioned is the error it gives while importing, please guide me as to how to handle this.
Thanks in advance
regards
Uday
"CREATE TABLE "RTEXT" ("SRNO" NUMBER, "TEXTDET" CLOB) PCTFREE 10 PCTUSED 40"
" INITRANS 1 MAXTRANS 255 STORAGE(INITIAL 65536 FREELISTS 1 FREELIST GROUPS "
"1 BUFFER_POOL DEFAULT) TABLESPACE "APEX_1244730274482010" LOGGING NOCOMPRES"
"S LOB ("TEXTDET") STORE AS (TABLESPACE "APEX_1244730274482010" ENABLE STOR"
"AGE IN ROW CHUNK 8192 PCTVERSION 10 NOCACHE LOGGING STORAGE(INITIAL 65536 "
"FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT))"
IMP-00003: ORACLE error 959 encountered
ORA-00959: tablespace 'APEX_1244730274482010' does not exist

You have to use SELECT tablespace_name, status FROM dba_tablespaces; from sql prompt or sql developer.
Ash
As Jonathan Lewis mentions:
A general reminder about "Forum Etiquette / Reward Points": http://forums.oracle.com/forums/ann.jspa?annID=718
If you never mark your questions as answered people will eventually decide that it's not worth trying to answer you because they will never know whether or not their answer has been of any use, or whether you even bothered to read it.
It is also important to mark answers that you thought helpful - again it lets other people know that you appreciate their help, but it also acts as a pointer for other people when they are researching the same question, moreover it means that when you mark a bad or wrong answer as helpful someone may be prompted to tell you (and the rest of the forum) what's so bad or wrong about the answer you found helpful.

Problems with importing text messages from PC Suit...

Problems with importing text messages from PC Suit 7.1.18.0 to my Nokia 5800
I am trying to import a csv file that contains text messages (Note that this file was created using PC Suit 7.1.18.0) to a subfolder that I have created to My Folders but PC Suits only imports the text messages to the Draft folder. Note that initially it shows that the messages are import in the correct folder but after a refresh it shows them in the Draft Folder. Is their any setting that I should change in the PC Suit or the phone? My computer runs on Windows XP Service Pack 3 and the Nokia 5800 was upgraded to the latest firmware v20.0.012
Thanks for your help

Most phones only allows importing of draft and archived box for SMS.
To do a restoring, you need to backup the SMS as a .nbu file using PC Suite and restore later.
If you got an SD card, you can also do a backup on the SD Card (backup.arc) then restore later (reset and restore: backup.arc and mmc).
What's the law of the jungle?

Tempo problems with imported wav files

Hey everyone, sorry if there's a quick fix for this in the forums that I couldn't find, but I've been having some tempo problems with imported .wav files.
Long story short, my system couldn't handle playing all the tracks for a song while recording drums, so I bounced out an mp3 of the song and put it in a new Logic file so my drummer could just play along to that as I recorded him. Unfortunately, the original song is at 167 bpm, but I forgot to change the bpm in the new Logic file with the .mp3 file of the song to 167 bpm, so it was left at the default 120 bpm.
So, the drums were recorded at the correct 167 bpm, but Logic thinks that those new drum .wav files should be played at 120 bpm, so when I import my drum tracks back into the original file, they do not play correctly at all.
I could get record it all again, but I wanted to check if there was a way I could salvage what I already have, since my drummer lives about an hour away right now and can't just come over whenever he wants.
Thanks for the help! I really appreciate it.

Hi,
First, do not use MP3 in Logic, the sound quality is less than AIFF, WAV or CAF, and Logic has to decode it for playback, making it a heavier burden on the CPU than an uncoded audiofile, such as AIFF, WAV or CAF.
Secondly, audio files are independent of Logic's tempo. If you bounce down an audio file in any format (other than Apple Loop), it will play back at the same speed, +regardless of Logics' tempo setting+, either at recording or playback. Logic doesn't 'think' anything. The BPM is only important to MIDI tracks, or to the spacing between audio files. The audio files themselves *are not affected* by the tempo setting. If you import an audio file of tempo 167 into a 120 BPM project, the file will still play at 167, only Logic will indicate the wrong bar positions.
regards, Erik.

Problem with import file type setting

Problem with import file type settings - In preferences>general I select "wav encoder" But then going to tools>Create it still says "create mp3 version".
Can't find a way to overcome this. Thanks for any help.

Doublechecking, roy. After making the preferences change, are you leaving the General tab by clicking the OK button down the bottom-right-hand corner of the tab?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

haben
From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
presets there for the QuickTime choice there.
What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30) or something else? Do you know if this camera is recording with a variable or
a constant frame rate?
Please review and consider and then we will decide what next.
Thank you.
ATR

Problems with import slides powerpoint

Hello,
I have a problem with import slides from the powerpoint, when
I try to import, the computer blow.
What I can do?

there have been lots of issues regarding this, however, I
have found that if I export my ppt as individual jpeg slides I can
then use the "insert > Slide > Image Slide" command to bring
in my ppt slides, I have tried everything else as well but what was
happening to me was Captivate 3 was losing all of my text and text
animation. Now my animation is not critical, however, the text is
very important of course. So now I have stagnat slides, a bit
boring but at least I was able to finish my project.
Hope this helps.
Tony :)

A problem with importing layered PSD file into Flash

Hi.
There's a problem with importing layered PSD file into Flash.
If I import a layered PSD file, some part the color of the lower layer is shown at the edge of objects or shadows. Instead, if I crop each layers first and import them, there's no problem.
If the higher layer has brush or transparent effects, it becomes worse.
Any help with this problem?
Thanks.

How was the original art created? Was the original RGB or CMYK? What is the resolution of the Photoshop file? Flash only works well with RGB and 72 pixel per inch resolution. If your original art is not set this way, then Flash will attempt to convert it as it imports it. Flash uses the sRGB color space. You'll get the best color translation if your Photoshop file is using this color preference.

Premiere Pro CS5: please help problem with importing a file error output "there was an error decompressing audio or video"

please help problem with importing a file error output "there was an error decompressing audio or video"

this is related to what adobe program/version?

Problems with retrieving data from tables with 240 and more records

Hi,
I've been connecting to Oracle 11g Server (not sure exact version) using Oracle 10.1.0 Client and O10 Oracle 10g driver. Everything was ok.
I installed Oracle 11.2.0 Client and I started to have problems with retrieving data from tables.
First I used the same connection string, driver and so on (O10 Oracle 10g) then I tried ORA Oracle but with no luck. The result is like this:
I'm able to connect to database. I'm able to retrieve data but from small tables (e.g. with 110 records it works perfectly using both O10 and ORA drivers). When I try to retrieve data from tables with like 240 and more records retrieval simply hangs (nothing happens at all - no error, no timeout). Application seems to hang forever.
I'm using Powerbuilder to connect to Database (either PB10.5 using O10 driver or PB12 using ORA driver). I used DBTrace, so I see that query hangs on the first FETCH.
So for the retrievals that hang I have something like:
(3260008): BIND SELECT OUTPUT BUFFER (DataWindow):(DBI_SELBIND) (0.186 MS / 18978.709 MS)
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=0
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=1
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=0
(3260008): EXECUTE:(DBI_DW_EXECUTE) (192.982 MS / 19171.691 MS)
(3260008): FETCH NEXT:(DBI_FETCHNEXT)
and this is the last line,
while for retrievals that end, I have FETCH producing time, data in buffer and moving to the next Fetch until all data is retrieved
On the side note, I have no problems with retrieving data either by SQL Developer or DbVisualizer.
Problems started when I installed 11.2.0 Client. Even if I want to use 10.0.1 Client, the same problem occurs. So I guess something from 11.2.0 overrides 10.0.1 settings.
I will appreciate any comments/hints/help.
Thank you very much.

pgoel wrote:
I've been connecting to Oracle 11g Server (not sure exact version) using Oracle 10.1.0 Client and O10 Oracle 10g driver. Everything was ok.Earlier (before installing new stuff) did you ever try retrieving data from big tables (like 240 and more records), if yes, was it working?Yes, with Oracle 10g client (before installing 11g) I was able to retrieve any data, either it was 10k+ records or 100 records. Installing 11g client changed something that even using old 10g client (which I still have installed) fails to work. The same problem occur no matter I'm using 10g or 11g client now. Powerbuilder hangs on retrieving tables with more than like 240 records.
Thanks.

Hi Guys, I have a problem with Importing Pictures onto my Mac mini with Lion installed by using a Card Reader, What is the problem here so I can get Pictures onto my Computer. ,

Hi Guys,
I have a problem with Importing Pictures onto my Mac mini with Lion installed by using a Card Reader,
What is the problem here so I can get Pictures onto my Computer. ,

Hi Noob Søren
There are a few things that are confusing in your question.
As far as I know, you dont have to install Time Machine on this OS as it is already installed for you. You only need to connect a hard drive to your computer via firewire or usb, click on the Time Machine icon, Open Time Machine Preference in the drop down menu and select a disk: your connected hard drive.
You can of course reformat this connected device, partition it into a few volumes to organise data if you so wish.
I find it strange that your mac's hard drive is divided into two volumes... perhaps this was created through bootcamp?
You can access the configuration of your hd through Applications/Utilities/Disk Utilities.
Clicking on one of the icons on the right hand panel will bring the details of the contents of your hardDrive and volumes. From there you can decide to erase a partition, reformat etc....
If your hd contains more than one volume, and one of them is empty, you could decide to remove it. Back up all your important data before doing so.
Hope this helps
WN

Problem with import of Large table

Similar Messages

Maybe you are looking for