Problem with importing pdf as a backgroung image

I have a requirement for importing a pdf/doc and map xml data and create a template. Generate a tiff image as the output using the template and mapped xml data. I am looking into your Adobe LiveCycle as one option. I am able to import the pdf but the layout of the pdf has been changed. According to our requirement the layout of the pdf should be the same as the imported pdf. Please, find the attached pdf for reference. Can you please provide me some assistance regarding evaluating this product.

Try clicking the link below. On the page that appears, click the drop-down and choose the forum that appears to match the software you are using.
Click here to view
Best of luck to you in solving your issue... Rick

Similar Messages

Problem with importing a large number of images to Lightroom?

I'm trying to import a large number of images from disk to Lightroom. If I select more that approximately 1500 images (1250 works fine), I get an error message saying "files do not exist". If I reduce the number of files imported, everything works fine. I can import in groups as long as the number selected at any one time is less that the ~1500 limit.
Has any one had a similar problems? I'm running LR 2.4 64-bit on Win7 RC 64-bit, Q6600 processor, 8 GB RAM.
Does not seem like this should be a problem. Its a real hassle to my workflow. I'm working on a series of time-laps movies (here is a link to a sample: http://vimeo.com/6375019).

Thanks for your reply Sean,
It is an internal disk drive, SATA II interface.I have no other disk/file problems, this is unique to LR as far as I can tell.
I'm loading files onto disk from a CF card reader outside of Lightroom, then opening LR and telling it to import from disk. I've never had a problem before with imports. Experimenting with number of files, somewhere between 1250 and 1500 is where the problem occurs.
Been busy making time-lapse videos of the fire in LA, so I'm away from the computer most of the time.
thanks,
Dan Finnerty

Problem with imported pdfs from older version

I'm working in CS4. The InDesign document I'm working on was originally done in an older version of InDesign (not sure which). It contains imported pdfs that were created in CS2 and CS3. When I export to pdf the older imported pdfs don't display properly on my client's PC - the type is not there, only boxes with question marks - but the pdf looks fine on my screen. I upgraded from CS2 to CS4. The only way I've gotten around this is to export the CS4 InDesign document as an .INX file, have a friend open it up in CS3 and save down to an .INX file again, open the doc up in CS2, create the pdf from CS2, and open it in the older version of Acrobat. Then my client sees the type clearly on their PC
I'm using Suitcase (thought it was a font issue, but I don't think so now as the fix seemed to be between the CS versions.
Anyone else have this problem and/or a better solution? I'd like to be able to simply export a pdf and be done with it.
Thanks!

Thats it thank you!
There was a text wrap applied to all the graphics. its working perfectly now!!
Thank you again!!!
Sam

Problem with Importing PDF

Hi, newbie here using LC Designer in Acrobat 9 Pro.
When I am Importing a PDF into LCD, if the import options are set to "Create an Interactive Form with Fixed Pages", everything imports fine. However, I cannot edit properties of the form fields in Designer, I have to go back to Acrobat.
When using the option of "Create an Interactive Form with a Flowable Layout" (which should give me property editing capability), for some odd reason the same PDF now kicks up a Missing Font Dialog box which says I am using ArialMT in the original PDF (I am not) and when I choose Arial (or any other font) as the substitute font, the document opens with Kanji (I believe that is how you describe it) characters.
What is even more strange is that once the document is open, in selecting any of the text and going to the font indicator shows that it is using the substitute font I suggested, but of course, it is incorrect.
What in the world is going on here?

The PDF can have fonts embedded in it that can be used to display the PDF the way the Developer of the form wanted it to be. When you import it into designer we cannot use fonts that are embedded, they must be on your machine.....so substitution is a must. Why the substitute font looks like Kanji I do not know. Can you post the form to [email protected] so I can try it on my machine?

Problem with importing images into time lapse

Hi
I am having problems with importing still images into a time lapse sequence in photoshop and would appreciate any suggestions!
I want to create a time lapse using a sequence of still photographs. All file names are sequentially name/numbered.
I am using the Motion workspace, and have followed all of the instructions available.
Create correct sized new document (film & video).
Create video timeline.
Set frame rate.
Choose 'create new video layer from file'.
Point to first image in the folder where the images are stored.
At this point, no matter what I have tried, I receive this error:
I have tried different sized new documents; tried jpegs and tiffs; tried different frame rates, tried different qualities and sizes of images; tried selecting the last image instead of the first (one recommendation).
If I use the 'Place' command from the file menu (and check the 'image sequence' box) instead of selecting 'Create new video layer' from the layers panel, it loads fine and I can still render the video.
It took me most of a day to discover this workaround, but every other reasonable 'how-to' that I can find says that I should be able to do it by opening files into a new video layer and it seems as though the new video layer option may give me more alternatives.
Anyone have any idea why I could be having these problems?
I have reset Photoshop, deleted the settings file, even reinstalled it. I use 64-bit on windows 7 and even installed the 32-bit to try that, but all with the same result.
Stuart

Unfortunately, yes--I've tried it that way over and over, and every other way I could think of. The files are all in one folder, and I've converted the raw files to both tiffs and jpegs. I even tried converting them to jpegs at the final pixel dimensions. Each folder that I have used only contains one type of file, and they are all part of the same sequence and sequentially numbered. I have even tried renumbering the files with numbers first, numbers last, numbers only, moving underscores. I moved the files from my external hard-drive to the desktop ... I have a lot less hair than I had only a few days ago!
I've looked at a few other tutorials that outline the same sequence of steps, and tried them over and over, and then changing one step at a time to make sure that it was not a single step that caused the problem.
The thing that is really bugging me is that it works fine if I use the different approach of using the place command instead.
Anyway, thanks for all of your time. It's going to be a lot simpler to just stick with 'place' command and I will likely do that, but I tend take things like this as a challenge. I like to know WHY it won't work for me. Sometimes it seems that there is just no logical explanation!
Stuart

Problems with importing images into Lightroom cc

Problems with importing images into Lightroom cc
I have installed lightroom cc and having trouble imortera images from my Canon 1DX.
Lightroom starting the capture, but then nothing happens more, if I turn off the camera, I get error message photo 100-200 could not be loaded.
Now I have left lightroom 5 and where the input port works fine.
What happened to the upgrade from Lightroom 5 to lightroom cc?
The camera has the latest software.

I've now tested in various ways.
First, I have images on both memory cards in the camera.
Test1) Selects Not all of the photos in the camera at the input port bearings, it seems to work fine.
Test 2) selects all cards in the camera and then get the following, Lightroom starts inportera short but stops and nothing happens (Fig.1).
I turn the camera off after a while and get the next meddelnade (picture 1)
Which can be translated:
"The following files were not imported because they could not read (351)
Property 1-100
etc. "
Picture 1.
Picture 2

Problem with importing

Hi all, I recently downloaded elements 11, and I imported some photos okay, but now it starts to import, gets about half way, and a box saying elements organizer has stopped working. When I went into problem details, it said appcrash. any ideas wot be goin on. (Im importing photos in raw) Regards. Paul.

Thanks for the reply jon. I was only importing 152 pics. off my nikon camera. I re downloaded elements 7 on to the puter, and they went straight on there with no trouble, so I would of thought they would go straight on to elmnts. 11. ho hum.and strange.
Date: Fri, 18 Jan 2013 04:58:39 -0700
From: [email protected]
To: [email protected]
Subject: Problem with importing
    Re: Problem with importing
    created by 99jon in Photoshop Elements - View the full discussion
Hi Paul What are your system specs. Raw files are usually quite large so the process could be draining your memory (RAM). Are you importing from camera or from your hard drive. In the case of the latter try importing one folder at a time or in smaller batches. You can select files and drag and drop into the organizer. You must drop on the dark gray area between the left and right side panels (if both panel are visible).
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5003831#5003831
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5003831#5003831
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5003831#5003831. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Problems with import slides powerpoint

Hello,
I have a problem with import slides from the powerpoint, when
I try to import, the computer blow.
What I can do?

there have been lots of issues regarding this, however, I
have found that if I export my ppt as individual jpeg slides I can
then use the "insert > Slide > Image Slide" command to bring
in my ppt slides, I have tried everything else as well but what was
happening to me was Captivate 3 was losing all of my text and text
animation. Now my animation is not critical, however, the text is
very important of course. So now I have stagnat slides, a bit
boring but at least I was able to finish my project.
Hope this helps.
Tony :)

Problems with importing text messages from PC Suit...

Problems with importing text messages from PC Suit 7.1.18.0 to my Nokia 5800
I am trying to import a csv file that contains text messages (Note that this file was created using PC Suit 7.1.18.0) to a subfolder that I have created to My Folders but PC Suits only imports the text messages to the Draft folder. Note that initially it shows that the messages are import in the correct folder but after a refresh it shows them in the Draft Folder. Is their any setting that I should change in the PC Suit or the phone? My computer runs on Windows XP Service Pack 3 and the Nokia 5800 was upgraded to the latest firmware v20.0.012
Thanks for your help

Most phones only allows importing of draft and archived box for SMS.
To do a restoring, you need to backup the SMS as a .nbu file using PC Suite and restore later.
If you got an SD card, you can also do a backup on the SD Card (backup.arc) then restore later (reset and restore: backup.arc and mmc).
What's the law of the jungle?

Tempo problems with imported wav files

Hey everyone, sorry if there's a quick fix for this in the forums that I couldn't find, but I've been having some tempo problems with imported .wav files.
Long story short, my system couldn't handle playing all the tracks for a song while recording drums, so I bounced out an mp3 of the song and put it in a new Logic file so my drummer could just play along to that as I recorded him. Unfortunately, the original song is at 167 bpm, but I forgot to change the bpm in the new Logic file with the .mp3 file of the song to 167 bpm, so it was left at the default 120 bpm.
So, the drums were recorded at the correct 167 bpm, but Logic thinks that those new drum .wav files should be played at 120 bpm, so when I import my drum tracks back into the original file, they do not play correctly at all.
I could get record it all again, but I wanted to check if there was a way I could salvage what I already have, since my drummer lives about an hour away right now and can't just come over whenever he wants.
Thanks for the help! I really appreciate it.

Hi,
First, do not use MP3 in Logic, the sound quality is less than AIFF, WAV or CAF, and Logic has to decode it for playback, making it a heavier burden on the CPU than an uncoded audiofile, such as AIFF, WAV or CAF.
Secondly, audio files are independent of Logic's tempo. If you bounce down an audio file in any format (other than Apple Loop), it will play back at the same speed, +regardless of Logics' tempo setting+, either at recording or playback. Logic doesn't 'think' anything. The BPM is only important to MIDI tracks, or to the spacing between audio files. The audio files themselves *are not affected* by the tempo setting. If you import an audio file of tempo 167 into a 120 BPM project, the file will still play at 167, only Logic will indicate the wrong bar positions.
regards, Erik.

Problem with preview PDF files on Windows 7 32bit

Hello,
in my office I have a problem with preview PDF files on my computers. The files are allright, but if I select a file and click on preview mode after ~ 10sec operation system write something "Preview this file is corrupt for PDF Preview Handler wrong". On other 64bit computers with same programs the preview is work. I try uninstall all Adobe soft (Reader, Flash), clean all Adobe data from folders in root and in register, but it is not solve this problem. On Microsoft forums wrote me, that the problem is probably with AR plugin.
So, can someone help me?
Config PC:
Windows 7 32/64bit Pro
Intel i3, 4GB
Adobe Reader 11.0.5
Adobe Flash Player 15 ActiveX
Adobe Flash Player 15 plugin
Preview Handler Surrogate Host ver.: 6.1.7601.17514
Thank you for help.

I think I figured it out after reading other forums. Thanks!

Problem with printing pdf file

hello,
lately i have problem with printing pdf file:
i click on the print button and the respod is very slow
it takes more than a minute till the print window apears.
i tryied to install version X but it's the same, the problem exist only when printing via adobe reader,
other programs i'd working much faster.
please advice,
thank you

No, it is not set to overprint. Also, I have to add that the printing results were not consistent. Sometimes it covered and sometimes it did not.

Problem with import file type setting

Problem with import file type settings - In preferences>general I select "wav encoder" But then going to tools>Create it still says "create mp3 version".
Can't find a way to overcome this. Thanks for any help.

Doublechecking, roy. After making the preferences change, are you leaving the General tab by clicking the OK button down the bottom-right-hand corner of the tab?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

haben
From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
presets there for the QuickTime choice there.
What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30) or something else? Do you know if this camera is recording with a variable or
a constant frame rate?
Please review and consider and then we will decide what next.
Thank you.
ATR

I have a problem with two PDF's when trying to open them through a link on a web page. The two PDF's open fine with Adobe on my own PC and on the server I have copied it to but when they are opened through a link on a web page (pointing to the server wher

I have a problem with two PDF's when trying to open them through a link on a web page. The two PDF's open fine with Adobe on my own PC and on the server I have copied it to but when they are opened through a link on a web page (pointing to the server where the PDFs open fine) I get an error 'There was an error processing a page. Invalid function resource' The other one just doesn't open at all. Can anyone help with this please?

Hello,
Are the pdf linked correctly in the website? Is this a public website? If yes, please post the link here.
~Deepak

Problem with importing pdf as a backgroung image

Similar Messages

Maybe you are looking for