Problem with importing still images

When I import images for creating a time-lapse video, some of the images are automatically being rotated +90 degrees. If I go through an manually correct them, they end up not be in the correct position or the correct scale (even though scale says 100 for all of them).
How do I prevent the autmatic rotating of still images?
Thanks,
Ricky

Check its properties in Windows Explorer. If that shows it as 664x1000 then PRE is importing correctly and IrfanView is 'auto-correcting'.
I seem to recall that IrfanView does "non-destructive" Rotation, unlike PS/PSE, where the actual pixels are rearranged, and are exported in that condition, with Save/Save_As. Might be something in the IrfanView Rotation scheme? Just a guess on my part, too, but I would anticipate that the Rotation in IrfanView is getting in the way, as other programs do not see the full effect of that scheme.
Not sure what "image viewers" are installed with Windows, but I would Open one of those problem files in, say Windows Paint, or Windows FAX Image Viewer, or something else than IrfanView to test.
Good luck,
Hunt

Similar Messages

Problems with importing illustrator images

I am having issues with the quality of my illustrator image that I'm importing into fireworks. The quality comes out very distorted and I have no idea why?? I thought vector images can be made as big or as small without disturbing the quality. Please help!!

this is also fireworks cs5...Thanks!

Problem with pixelly still images but GREAT transitions/ken burns....

I'm creating a slide show to be projected on a 9' screen by a projector that has 1024X768 resolution. I resized all my jpegs to 1024 by 768 and dumped them into iMovie due to the fact that I want lots of different lengths and transitions/fades/Ken Burns FX for different still photos (as opposed to just creating a slideshow from iPhoto).
My Problem is that after I burned in iDVD at "highest quality" and I project on the big screen, the non-FX photos look pixelled and the transitions/pans/zooms etc are fine! When editing on my cinema display everything looks fine too. The pixelization is just annoying and I'm wondering of I missed a step in the send to iDVD process, or if maybe the transitions are rendered and the non-FX still parts are not?
Any ideas GREATLY appreciated!
- SARAH

projector that has 1024X768 resolution. I resized all my jpegs to 1024 by 768
You didn't have to do the downscaling because NTSC DV is scaled to 720x480 in the end no matter what.
non-FX photos look pixelled and the transitions/pans/zooms etc are fine!
So obviously the cause was this ancient iMovie bug that haunts the poor users:
Basically iMovie renders jaggy stills when sending them to tape or iDVD.
On the other hand, Ken-Burnsed images, transitions/pans/zooms are immune to that bug because they are converted to video before that bug has a chance to destroy them.
Check the details and workarounds here:
http://www.sjoki.uta.fi/~shmhav/iMovieHD_6_bugs.html#jaggystills

Problem with importing using Image Capture

I recently imported pictures from my canon Eos 40d to my I photo library . they did not show up instead I got a series of ip meta files and ip album files etc but no photographs. Does any one have any Idea where the pictures went? I erased them as I imported them which was a serious error.

Hi terrence,
thanks for your help. the only reason I used finder is that the pictures are not in Iphoto
I can't find them, and I have never had all of those files appear on finder before. I watched all of the pictures upload nothing appeared to be wrong. I still have a mystery.
I checked all of the events and all of the individual pictures on my library they are missing. It was around 150 pictures

Problem with importing images into time lapse

Hi
I am having problems with importing still images into a time lapse sequence in photoshop and would appreciate any suggestions!
I want to create a time lapse using a sequence of still photographs. All file names are sequentially name/numbered.
I am using the Motion workspace, and have followed all of the instructions available.
Create correct sized new document (film & video).
Create video timeline.
Set frame rate.
Choose 'create new video layer from file'.
Point to first image in the folder where the images are stored.
At this point, no matter what I have tried, I receive this error:
I have tried different sized new documents; tried jpegs and tiffs; tried different frame rates, tried different qualities and sizes of images; tried selecting the last image instead of the first (one recommendation).
If I use the 'Place' command from the file menu (and check the 'image sequence' box) instead of selecting 'Create new video layer' from the layers panel, it loads fine and I can still render the video.
It took me most of a day to discover this workaround, but every other reasonable 'how-to' that I can find says that I should be able to do it by opening files into a new video layer and it seems as though the new video layer option may give me more alternatives.
Anyone have any idea why I could be having these problems?
I have reset Photoshop, deleted the settings file, even reinstalled it. I use 64-bit on windows 7 and even installed the 32-bit to try that, but all with the same result.
Stuart

Unfortunately, yes--I've tried it that way over and over, and every other way I could think of. The files are all in one folder, and I've converted the raw files to both tiffs and jpegs. I even tried converting them to jpegs at the final pixel dimensions. Each folder that I have used only contains one type of file, and they are all part of the same sequence and sequentially numbered. I have even tried renumbering the files with numbers first, numbers last, numbers only, moving underscores. I moved the files from my external hard-drive to the desktop ... I have a lot less hair than I had only a few days ago!
I've looked at a few other tutorials that outline the same sequence of steps, and tried them over and over, and then changing one step at a time to make sure that it was not a single step that caused the problem.
The thing that is really bugging me is that it works fine if I use the different approach of using the place command instead.
Anyway, thanks for all of your time. It's going to be a lot simpler to just stick with 'place' command and I will likely do that, but I tend take things like this as a challenge. I like to know WHY it won't work for me. Sometimes it seems that there is just no logical explanation!
Stuart

Problems with importing images into Lightroom cc

Problems with importing images into Lightroom cc
I have installed lightroom cc and having trouble imortera images from my Canon 1DX.
Lightroom starting the capture, but then nothing happens more, if I turn off the camera, I get error message photo 100-200 could not be loaded.
Now I have left lightroom 5 and where the input port works fine.
What happened to the upgrade from Lightroom 5 to lightroom cc?
The camera has the latest software.

I've now tested in various ways.
First, I have images on both memory cards in the camera.
Test1) Selects Not all of the photos in the camera at the input port bearings, it seems to work fine.
Test 2) selects all cards in the camera and then get the following, Lightroom starts inportera short but stops and nothing happens (Fig.1).
I turn the camera off after a while and get the next meddelnade (picture 1)
Which can be translated:
"The following files were not imported because they could not read (351)
Property 1-100
etc. "
Picture 1.
Picture 2

Premiere Pro CS5 won't import still images correctly

I've about had it with this pile of ****.
Brand new install of Premiere Pro CS5. When attempting to import still images, random images will show up as other images. i.e. in Windows, I'll have the following:
one.jpg (shows up at one.jpg)
two.jpg (shows up at two.jpg)
three.jpg (shows up at three.jpg)
Once I import them into PPro, I get this:
one.jpg (shows up at one.jpg)
two.jpg (shows up at two.jpg)
three.jpg (shows up at one.jpg) <-----
In other words, three.jpg is named three.jpg in PPro, but when I bring it into a sequence, or view it, it displays the image from one.jpg
I've tried clearing the media cache, renaming the images, moving them to different directories/drives. Any suggestions? Or should I just get my money back ffs. Thanks for any help.
-Eric

You've stumbled onto a bug.
Here's the interim fix.
Imported Image Links Problem
And here

Tempo problems with imported wav files

Hey everyone, sorry if there's a quick fix for this in the forums that I couldn't find, but I've been having some tempo problems with imported .wav files.
Long story short, my system couldn't handle playing all the tracks for a song while recording drums, so I bounced out an mp3 of the song and put it in a new Logic file so my drummer could just play along to that as I recorded him. Unfortunately, the original song is at 167 bpm, but I forgot to change the bpm in the new Logic file with the .mp3 file of the song to 167 bpm, so it was left at the default 120 bpm.
So, the drums were recorded at the correct 167 bpm, but Logic thinks that those new drum .wav files should be played at 120 bpm, so when I import my drum tracks back into the original file, they do not play correctly at all.
I could get record it all again, but I wanted to check if there was a way I could salvage what I already have, since my drummer lives about an hour away right now and can't just come over whenever he wants.
Thanks for the help! I really appreciate it.

Hi,
First, do not use MP3 in Logic, the sound quality is less than AIFF, WAV or CAF, and Logic has to decode it for playback, making it a heavier burden on the CPU than an uncoded audiofile, such as AIFF, WAV or CAF.
Secondly, audio files are independent of Logic's tempo. If you bounce down an audio file in any format (other than Apple Loop), it will play back at the same speed, +regardless of Logics' tempo setting+, either at recording or playback. Logic doesn't 'think' anything. The BPM is only important to MIDI tracks, or to the spacing between audio files. The audio files themselves *are not affected* by the tempo setting. If you import an audio file of tempo 167 into a 120 BPM project, the file will still play at 167, only Logic will indicate the wrong bar positions.
regards, Erik.

Problem with displaying BLOB images on JSP page using a servlet

hi. I have a big problem with displaying BLOB images using JSP. I have a servlet that connects to the oracle database, gets a BLOB image , reads it, and then displays it using a BinaryStream. The problem is , this works only when i directly call that servlet, that is http://localhost:8080/ImageServlet. It doesn't work when i try to use that servlet to display my image on my JSP page (my JSP page displays only a broken-image icon ) I tried several coding approaches with my servlet (used both Blob and BLOB objects), and they work just fine as long as i display images explicitly using only the servlet.
Here's what i use : ORACLE 10g XE , Eclipse 3.1.2, Tomcat 5.5.16 , JDK 1.5
here is one of my image servlet's working versions (the essential part of it) :
               BLOB blob=null;
          rset=st.executeQuery("SELECT * FROM IMAGES WHERE ID=1");
          while (rset.next())
               blob=((OracleResultSet)rset).getBLOB(2);
          response.reset();
          response.setContentType("image/jpeg");
          response.addHeader("Content-Disposition","filename=42.jpeg");
                ServletOutputStream ostr=response.getOutputStream();
               InputStream istr=blob.getBinaryStream(1L);
                int size=blob.getBufferSize();
          int len=-1;
                byte[] buff = new byte[size];
                     while ((len=istr.read( buff ))!=-1 ) {
               ostr.write(buff,0,len);
         response.flushBuffer();
         ostr.close(); and my JSP page code :
<img src="/ImageServlet" border="0" > If you could just tell me what i'm doing wrong here , or if you could show me your own solutions to that problem , i would be very greatful ,cos i'm realy stuck here , and i'm rather pressed for time too. Hope someone can help.

I turns out that it wasn't that big of a problem after all. All i had to do was to take the above code and place it into another JSP page instead of into a servlet like i did before. Then i just used that page as a source for my IMG tag in my first JSP. It works perfectly well. Why this doesn't work for servlets i still don't know, but it's not a problem form me anymore . Ofcourse if someone knows the answer , go ahead and write. I would still appriceatte it.
here's the magic tag : <img src="ImageJSP.jsp" border="0" > enjoy : )

Problem with import file type setting

Problem with import file type settings - In preferences>general I select "wav encoder" But then going to tools>Create it still says "create mp3 version".
Can't find a way to overcome this. Thanks for any help.

Doublechecking, roy. After making the preferences change, are you leaving the General tab by clicking the OK button down the bottom-right-hand corner of the tab?

DW CS3 problem with PNG-8 images in Design View?

DW CS3 (build 3481) on XP seems to have problems with PNG-8 images, specifically trying to display them in design view.
I had a very simple image that was able to be exported by Fireworks CS4 as PNG-8 using 4 colors (no transparency) for a tiny file size under 250 bytes.
DW could not display it at all, or even recognize it, reporting it was 0 x 0 in size. I published the page anyway, and it looked fine in the browser.
I upped the number of colors to 32, and DW could then display it in design view in the page I was working on.
I'm still having problems with other PNG-8 images. The attached file "temp.jpg" is a screenshot showing part of the design view in DW.
The smaller image on the left of the banner is "58_certificate_of_discharge.png" (attached), and the larger image below is used as the background of the DIV containing the form,"compassbk.png" (also attached).
These images all look fine in the browser, but terrible in DW.
I'm stumped as to why.
Thanks in advance.

According to a different discussion, the images that are stuck as "Queued" are showing a bug in the virus scanning on the forums.
Now trying the recommended 'camera icon' method...
Looks like it worked.
Now compare what it looks like in DW CS3 in the design view:
It's a 16 color PNG-8 made in Fireworks CS4 with no transparency, size is 113 x 58, ending up at 1.71K.
If this is a repeatable problem in CS3, is there any hope of it being resolved, or am I stuck with upgrading to CS4 as my only option (assuming it's fixed in CS4)?
Thanks.

Problem with importing

Hi all, I recently downloaded elements 11, and I imported some photos okay, but now it starts to import, gets about half way, and a box saying elements organizer has stopped working. When I went into problem details, it said appcrash. any ideas wot be goin on. (Im importing photos in raw) Regards. Paul.

Thanks for the reply jon. I was only importing 152 pics. off my nikon camera. I re downloaded elements 7 on to the puter, and they went straight on there with no trouble, so I would of thought they would go straight on to elmnts. 11. ho hum.and strange.
Date: Fri, 18 Jan 2013 04:58:39 -0700
From: [email protected]
To: [email protected]
Subject: Problem with importing
    Re: Problem with importing
    created by 99jon in Photoshop Elements - View the full discussion
Hi Paul What are your system specs. Raw files are usually quite large so the process could be draining your memory (RAM). Are you importing from camera or from your hard drive. In the case of the latter try importing one folder at a time or in smaller batches. You can select files and drag and drop into the organizer. You must drop on the dark gray area between the left and right side panels (if both panel are visible).
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5003831#5003831
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5003831#5003831
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5003831#5003831. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Problems with import slides powerpoint

Hello,
I have a problem with import slides from the powerpoint, when
I try to import, the computer blow.
What I can do?

there have been lots of issues regarding this, however, I
have found that if I export my ppt as individual jpeg slides I can
then use the "insert > Slide > Image Slide" command to bring
in my ppt slides, I have tried everything else as well but what was
happening to me was Captivate 3 was losing all of my text and text
animation. Now my animation is not critical, however, the text is
very important of course. So now I have stagnat slides, a bit
boring but at least I was able to finish my project.
Hope this helps.
Tony :)

Can't import still images into a project or create a podcast track

I'd be grateful if anyone can explain why I can't import still images onto a track like you can easily do in garage band - in garage band you simply create a podcast track, then drag your photos onto it. However in logic, when I open the media browser i can get a photo folder up but it will not allow me to even look at the contents.
Also, why is it that the manual for logic express has nothing about how to import a movie to produce a movie score - and yet garage band can even do this.
Thanks for any advice.

Have you tried "Working with Video" section of the manual? It's somewhere close to the end...
Logic works with audio, not images. That's why you can't import a photo, because media browser is used to locate audio files, mostly. And sometimes video.
I guess it works this way, you create a podcast with Logic, bounce it to mp3 or another compressed format. Then import it into GB and insert a photo.

I am having a problem with importing cd's

hi, I am having a problem with importing my music cd's into iTunes when I put a cd into my cd drive. The wrong information about the music cd comes up iTunes thinks that I still have the cd in the drive that I imported before. all my other cd's import fine it is just a problem with this one disc. Has this happened to anyone else? Does anyone have any suggestions on how I can fix this ?
Thanks,
lizabler
Fifth Generation iPod 30 GB Windows XP

I am having the same problems on multiple CD...i import 1...goes ok...then when I import the new CD it say "Would you like to import "name of CD I just imported"...can't get it to read the cd title correctly..just keeps throwing up the last CD. Reboot has no effect on this problem.
Thanks.

Problem with importing still images

Similar Messages

Maybe you are looking for