Problem with importing using Image Capture

I recently imported pictures from my canon Eos 40d to my I photo library . they did not show up instead I got a series of ip meta files and ip album files etc but no photographs. Does any one have any Idea where the pictures went? I erased them as I imported them which was a serious error.

Hi terrence,
thanks for your help. the only reason I used finder is that the pictures are not in Iphoto
I can't find them, and I have never had all of those files appear on finder before. I watched all of the pictures upload nothing appeared to be wrong. I still have a mystery.
I checked all of the events and all of the individual pictures on my library they are missing. It was around 150 pictures

Similar Messages

HT1349 Suddenly both my husband and I cannot import photos from our iPhones (4) to our Mac (10.6.8) - error unrecognisable file - these files are .jpg. I have tried importing using Image Capture - same error.

I had a thought about any changes we may have both made recently - in The Camera settings we turned HDR off - because we had 2 images of the same photo.
Maybe the import is failing because of the duplicates

I've managed to fix this.
After 3 attempts, Image Capture (instead of iPhoto) was finally able to pull my photos/video off my iPhone. There were a few shots missing, I'm guessing those were the "corrupt" ones. No idea how or why I could end up with corrupt images, the only shots on my phone were ones that I'd taken with my phone.
After that, I opened up Photos on my iPhone, selected every photo and every video and deleted them all.
Then I took a couple shots with the phone, re-opened iPhoto, and everything seemed to work dandy.
Still. Lame.

Problem with importing still images

When I import images for creating a time-lapse video, some of the images are automatically being rotated +90 degrees. If I go through an manually correct them, they end up not be in the correct position or the correct scale (even though scale says 100 for all of them).
How do I prevent the autmatic rotating of still images?
Thanks,
Ricky

Check its properties in Windows Explorer. If that shows it as 664x1000 then PRE is importing correctly and IrfanView is 'auto-correcting'.
I seem to recall that IrfanView does "non-destructive" Rotation, unlike PS/PSE, where the actual pixels are rearranged, and are exported in that condition, with Save/Save_As. Might be something in the IrfanView Rotation scheme? Just a guess on my part, too, but I would anticipate that the Rotation in IrfanView is getting in the way, as other programs do not see the full effect of that scheme.
Not sure what "image viewers" are installed with Windows, but I would Open one of those problem files in, say Windows Paint, or Windows FAX Image Viewer, or something else than IrfanView to test.
Good luck,
Hunt

Problems with importing illustrator images

I am having issues with the quality of my illustrator image that I'm importing into fireworks. The quality comes out very distorted and I have no idea why?? I thought vector images can be made as big or as small without disturbing the quality. Please help!!

this is also fireworks cs5...Thanks!

Problem with importing images into time lapse

Hi
I am having problems with importing still images into a time lapse sequence in photoshop and would appreciate any suggestions!
I want to create a time lapse using a sequence of still photographs. All file names are sequentially name/numbered.
I am using the Motion workspace, and have followed all of the instructions available.
Create correct sized new document (film & video).
Create video timeline.
Set frame rate.
Choose 'create new video layer from file'.
Point to first image in the folder where the images are stored.
At this point, no matter what I have tried, I receive this error:
I have tried different sized new documents; tried jpegs and tiffs; tried different frame rates, tried different qualities and sizes of images; tried selecting the last image instead of the first (one recommendation).
If I use the 'Place' command from the file menu (and check the 'image sequence' box) instead of selecting 'Create new video layer' from the layers panel, it loads fine and I can still render the video.
It took me most of a day to discover this workaround, but every other reasonable 'how-to' that I can find says that I should be able to do it by opening files into a new video layer and it seems as though the new video layer option may give me more alternatives.
Anyone have any idea why I could be having these problems?
I have reset Photoshop, deleted the settings file, even reinstalled it. I use 64-bit on windows 7 and even installed the 32-bit to try that, but all with the same result.
Stuart

Unfortunately, yes--I've tried it that way over and over, and every other way I could think of. The files are all in one folder, and I've converted the raw files to both tiffs and jpegs. I even tried converting them to jpegs at the final pixel dimensions. Each folder that I have used only contains one type of file, and they are all part of the same sequence and sequentially numbered. I have even tried renumbering the files with numbers first, numbers last, numbers only, moving underscores. I moved the files from my external hard-drive to the desktop ... I have a lot less hair than I had only a few days ago!
I've looked at a few other tutorials that outline the same sequence of steps, and tried them over and over, and then changing one step at a time to make sure that it was not a single step that caused the problem.
The thing that is really bugging me is that it works fine if I use the different approach of using the place command instead.
Anyway, thanks for all of your time. It's going to be a lot simpler to just stick with 'place' command and I will likely do that, but I tend take things like this as a challenge. I like to know WHY it won't work for me. Sometimes it seems that there is just no logical explanation!
Stuart

I am importing videos from my canon sl1 to my macbook when i use iphoto is says "iPhoto cannot import your photos because there was a problem downloading an image." and when i use image capture it says "An error occured while importing. The item 'MVI_1040

I am importing videos from my canon sl1 to my macbook air when i use iphoto is says "iPhoto cannot import your photos because there was a problem downloading an image." and when i use image capture it says "An error occured while importing. The item ‘MVI_1040'' Thanks in advance

Can you access the images on the phone with Image Capture (in the Applications Folder) ?

IMac applications see my iPhone 5s but cannot display the photos. Last week I was using Image Capture with no problem.

I have an iMac 10.8.4 and an iPhone 5s. I recently downloaded 110 photos and 10 very short videos using Image Capture v.6.2. I plugged the phone into the iMac, all of the photos appeared in Image Capture, I selected all and sent them along to a folder on an external hd.
However, this week, attempting the same procedure, I get nothing. Image Capture sees my phone but does not display any photos, just a big blank window. Same response from iPhoto, Aperture, and Lightroom; they all recognize the phone but none of the photos appear. Insight would be appreciated! Thanks.

Hello WellShoot,
Thank you for the details of the issue you are experiencing with importing photos from your Camera Roll using Image Capture. You have taken some really good steps already to troubleshoot this issue. The article below has a few additional troubleshooting steps you can take:
iOS: Unable to import photos to computer
http://support.apple.com/kb/ts3195
Thank you for using Apple Support Communities.
Best,
Sheila M.

Why can I no longer import EDITED photo from my iPad to my Mac using Image Capture from Snapseed app?

Why can I no longer import EDITED photo from my iPad to my Mac using Image Capture? This is farcical and a real problem having to email them individually to myself and is totally inefficient time wise compared to previously using image capture! Why change this when it was working well and very quickly until the latest change. Now I have to move files from downloads into an appropriate folder, after emailing each individual edited image to myself, then I have to open in Photoshop and rename the file. This is ludicrous and takes forever to do!

Thank you! I suppected it would be in the settings somewhere. I' ve much to learn...get myself into trouble pushing buttons I don't really understand.

Using Image Capture to scan with Canon Pixma MX700

I previously had trouble connecting my Canon Pixma MX700 to my MBP, but soon figured out that I needed a new high speed USB 2.0 cable, versus the old one I was trying to use it with. Doh!
So now it prints without any trouble at all, and I know that all its features - printing, scanning, fax, copier, are supposed to be compatible with Leopard.
However, I'm still having issues scanning. I Googled and found a comment somewhere that with this specific model, one has to use Image Capture for the scanning portion, instead of the Canon software.
Great, so that explained the problem I was having trying to figure out how to GET it to communicate at all with the MBP (downloaded the latest scanner driver from Canon with no result).
But it still will not scan with Image Capture. Communication is fine- the image is detected and I can see it perfectly in the Image Capture window, am able to change options, etc. Once I drag and select the image I want to scan and click the scan button, nothing happens. Or more specifically, the button will be click-able and for about two seconds it appears to be working (with the scan button substituted by a cancel button), but then the scan button will pop back up and nothing appears in the folder I specified the image to be saved to.
Now I'm completely stumped. What am I doing wrong?
Thanks!!!

With my MacBook running Leopard, I had been able to successfully scan multiple images by pressing the MX7000 scan button and capturing the images with MP Navigator. The MX700 is networked over WiFi. Early on, I learned that it seemed to be more reliable to drive this process using the scan button, rather than trying to initiate the scan from the MP Navigator UI.
However, recently things stopped working, and after the first image was scanned, subsequent scans would fail, with MP Navigator complaining about not being able to connect to the scanner. This sounds similar to the problem described in the original posting.
I went to the Canon USA support site and downloaded /installed the latest versions of the MX700 scan driver (13.9.0) and MP Navigator (1.0.4), both available under the "Drivers and Downloads" section for the MX700 support page (be sure to select "Mac OS X" from the pull-down menu).
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDeta ilTabAct&fcategoryid=238&modelid=15651#DownloadDetailAct
The new updates seem to have solved the problem, and I can now scan multiple images one after the other. Again, I always initiate the scan from the button on the MX700, and always capture using MP Navigator, which has the really nice feature for creating and editing multi-page PDFs.
Message was edited by: donbondio

Using Image Capture to import to Aperture but pictures went disappeared

Dear All,
I used Image Capture to import my pictures from iPad to my Aperture. This is my first time doing so. Normally I would just use Aperture to do the direct import.
The Image Capture saying all imports were successful, however, I could not find one single picture in Aperture. So I did it again, and it said all images were imported.
I restarted my computer to see whether the update was delayed, but I still could not find any picture.
Then I tried to import again by watching out the disk size, to see whether the import was actually taken place. And the outcome is positive, the available size of the disk is dropping (nothing else was running at the mean time).
So now I have this annoying thought keeps coming, where are all the images? And if I did import them 3 times, I want to delete them......

Your Aperture library is showing a wrong icon - have you changed it manually? The Finder is showing it as a plug-in, not as a photo library.
The icon should look like a fan of pictures, at least in aperture 3 - what is your Aperture version btw.?
You said, that the available disk space is being reduced, when you are importing, but does the size of your Aperture library increase, or is it staying at 46.82 GB?
If you did not change the icon of the library intentionally, your aperture library may be corrupted, and is not recognizable as a library. Try, if repairing the Aperture library with the First Aid Tools will fix this:
Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual
Make a backup of the library, before you try the First Aid options.
After repairing, look for a "recovered" project inside the library.
If your current Aperture library really does not import the photos, the images may be in a temporary folder or a different Aperture library.
To search for the image files outside Aperture, use the Finder's search panel.
Open a Finder window showing your HD and type "⌘F".
Add a search rule "Kind is Image"
And set "Arrange by" to "Date Added". This will show all newer imports at the end of the list.

Problems with importing images into Lightroom cc

Problems with importing images into Lightroom cc
I have installed lightroom cc and having trouble imortera images from my Canon 1DX.
Lightroom starting the capture, but then nothing happens more, if I turn off the camera, I get error message photo 100-200 could not be loaded.
Now I have left lightroom 5 and where the input port works fine.
What happened to the upgrade from Lightroom 5 to lightroom cc?
The camera has the latest software.

I've now tested in various ways.
First, I have images on both memory cards in the camera.
Test1) Selects Not all of the photos in the camera at the input port bearings, it seems to work fine.
Test 2) selects all cards in the camera and then get the following, Lightroom starts inportera short but stops and nothing happens (Fig.1).
I turn the camera off after a while and get the next meddelnade (picture 1)
Which can be translated:
"The following files were not imported because they could not read (351)
Property 1-100
etc. "
Picture 1.
Picture 2

Using Image Capture with Epson NX420 in 10.5.8

I have not gotten around to updating my computer to Snow Leopard. My computer usually have two users with fast user switch. Usually the other user tend to have Photoshop open, so I can't use Photoshop(stupid licensing issue even though it is on th SAME computer!) in my account when I need to scan something. So I use Image Capture. I just bought new printer, Epson NX420 using Wifi.
I can't seem to get Image Capture to use the scanner wirelessly unless I use Epson's own Scan softare. I am pretty partial to the Image Capture cuz it's alot faster.
Anyway, my point is is there a way that I can get Image Capture to work with the NX420 on 10.5.8 without spending more money?

I was having this same problem, too. My MacBook Pro w/ Lion could no longer communicate with my Epson Stylus NX420, which seemed to happen randomly as the printer was working fine before.
I finally searched for the solution and found it! After downloading and installing the latest drivers on my Mac, it is now able to communicate with the printer and prints just fine.
Hope this helps.

Problem with displaying BLOB images on JSP page using a servlet

hi. I have a big problem with displaying BLOB images using JSP. I have a servlet that connects to the oracle database, gets a BLOB image , reads it, and then displays it using a BinaryStream. The problem is , this works only when i directly call that servlet, that is http://localhost:8080/ImageServlet. It doesn't work when i try to use that servlet to display my image on my JSP page (my JSP page displays only a broken-image icon ) I tried several coding approaches with my servlet (used both Blob and BLOB objects), and they work just fine as long as i display images explicitly using only the servlet.
Here's what i use : ORACLE 10g XE , Eclipse 3.1.2, Tomcat 5.5.16 , JDK 1.5
here is one of my image servlet's working versions (the essential part of it) :
               BLOB blob=null;
          rset=st.executeQuery("SELECT * FROM IMAGES WHERE ID=1");
          while (rset.next())
               blob=((OracleResultSet)rset).getBLOB(2);
          response.reset();
          response.setContentType("image/jpeg");
          response.addHeader("Content-Disposition","filename=42.jpeg");
                ServletOutputStream ostr=response.getOutputStream();
               InputStream istr=blob.getBinaryStream(1L);
                int size=blob.getBufferSize();
          int len=-1;
                byte[] buff = new byte[size];
                     while ((len=istr.read( buff ))!=-1 ) {
               ostr.write(buff,0,len);
         response.flushBuffer();
         ostr.close(); and my JSP page code :
<img src="/ImageServlet" border="0" > If you could just tell me what i'm doing wrong here , or if you could show me your own solutions to that problem , i would be very greatful ,cos i'm realy stuck here , and i'm rather pressed for time too. Hope someone can help.

I turns out that it wasn't that big of a problem after all. All i had to do was to take the above code and place it into another JSP page instead of into a servlet like i did before. Then i just used that page as a source for my IMG tag in my first JSP. It works perfectly well. Why this doesn't work for servlets i still don't know, but it's not a problem form me anymore . Ofcourse if someone knows the answer , go ahead and write. I would still appriceatte it.
here's the magic tag : <img src="ImageJSP.jsp" border="0" > enjoy : )

Hi Guys, I have a problem with Importing Pictures onto my Mac mini with Lion installed by using a Card Reader, What is the problem here so I can get Pictures onto my Computer. ,

Hi Guys,
I have a problem with Importing Pictures onto my Mac mini with Lion installed by using a Card Reader,
What is the problem here so I can get Pictures onto my Computer. ,

Hi Noob Søren
There are a few things that are confusing in your question.
As far as I know, you dont have to install Time Machine on this OS as it is already installed for you. You only need to connect a hard drive to your computer via firewire or usb, click on the Time Machine icon, Open Time Machine Preference in the drop down menu and select a disk: your connected hard drive.
You can of course reformat this connected device, partition it into a few volumes to organise data if you so wish.
I find it strange that your mac's hard drive is divided into two volumes... perhaps this was created through bootcamp?
You can access the configuration of your hd through Applications/Utilities/Disk Utilities.
Clicking on one of the icons on the right hand panel will bring the details of the contents of your hardDrive and volumes. From there you can decide to erase a partition, reformat etc....
If your hd contains more than one volume, and one of them is empty, you could decide to remove it. Back up all your important data before doing so.
Hope this helps
WN

Can't import photos using image capture or iphoto

When I plug in the iphone to my mac, I cannot get the photos off the phone. I did it once before, while leaving the original photos on the phone, but now I photo says there was an error importing 38 items, which happen to be the 38 photos I've taken since my initial import. Image capture "imports" them onto my desktop, but the files are unreadable?
Is this something with the phone or the computer, or simply a software issue.
Please help....
Gavin

i deleted HD cache and user cache as well as image capture prefs and IC performed better right away but then had same issue where iphone stops importing photos. pretty crappy...it seems image capture has never worked right (not in 10.3, not in 10.4, and still not in 10.5, don't remember if 10.2 or 10.1 had image capture) atleast before it would import the photos; progress indicator would get stuck but upon opening user picture folder, photos imported fine. We might be SOL, thanks Steve's Dev Team!

Problem with importing using Image Capture

Similar Messages

Maybe you are looking for