Problem with importing video

Hi !
I'm using Premiere Elements 10, over win XP sp3.
I started editing video about a month ago to create family video and it woked perfectly,
last week, i captured a 16 minute long video from a panasonic mini dv camcorder using windows movie maker (i don't have a firewire card, and it worked fine over USB cable)
the movie is 16 minutes long, and weighs about 3.5 GB.
when I import ir to PE it says its 2 hours long and 16 minutes, and it dosent show any video, the sound does work.
the video works well on any other player, including the organizer, which comes with PE.
i read the help here and couldt find anything more than looking with G spot, and re-installing PE and K Lite Codec Pack 9 full, nothing worked so far...
print screen of h2:16:24 in PE :
how can i make it work ?
Thank you !
Jhon

I suggest uninstalling K-Lite and reinstalling PRE to see if this makes any difference. Others have reported that some Codec packs replace the default codecs PRE expects.
You should be able to capture directly to PRE over USB using File> Get Media from> Files and Folders - although I go along with Steve, $15 should get you a FireWire card and cable and you'll be guaranteed the best quality input. e.g kit (card and cable) for £10.00.
If your camcorder settings allow you to select MTP mode for your USB connection you could import the clip using the Elements Organizer: File> Get Photos and Videos> From Camera or Card Reader. Your camcorder should show as a device. In my example both my DSLR (photo capability only) and my Compact (photo and video) show as valid camera devices over USB.
Cheers,
Neale
Insanity is hereditary, you get it from your children

Similar Messages

Problems with importing video to imovie

I have a Sony Camorder and i'm having issues with importing video files to my Macbook. The message I'm receive is:
Error occured during import
There was a problem importing 1 of 1 clips from your camera. Please review the imported movies carefully.

While we all have MacBooks in this forum not all of us use iMovie. There's an iMovie Support Community where everybody uses iMovie. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/ilife/imovie

Problem with importing videos from Aperture

I was able to import videos from Aperture within FCPX. However, when I tried to import some older videos, the following error message appeared:
"No importable files
None of the selected files or folders can be imported. Change the selection and try again."
I noticed that all the video files older than about three months didn't work, and all the newer files worked, regardless what camera it was from (D800, iPhone, m4/3 camera)
I opened up the aperture library package and compared the permission for one video file that I could import, and one that I couldn't. They have the same permissions, so it isn't a permission issue. I tried exporting the problem video from Aperture and importing it into FCPX, and it accepted it.
The other thing I've noticed that is for the files that I imported from Aperture library, the video files in the Original Media folder are only around 250 KB. It seems that they are only aliases. All the more reason I need to find a way to drag videos from Aperture into FCPX, as the files aren't duplicated.
Does anybody know a solution to this problem?
Thanks a lot!

Aperture drag'n'drop export only creates reference movies (which can break!)
Background of your issue:
If you simply drag your video file(s) from the Aperture window to the Desktop (in my case a MP4 from my Galaxy Nexus, the original having 70 MB), Aperture does not copy the master or the version file, but instead it creates a reference movie file, which is a very small video container file (in my case: MP4, 26 KB) with no AV-content but only a reference to your master video file in your Aperture library, ~/Pictures/Aperture Library.aplibrary/Masters/YYYY/MM/DD/YYYYMMDD-hhmmss/filename.
So by principle it acts like an "alias", but technically it is not a filesystem alias (filepath, ID within filesystem (inode), metadata), but a so called reference movie. If you meanwhile deleted/manipulated the master file from the Aperture Library, or changed something from the filepath (volume name, home directory name, etc) import in Final Cut Pro will fail of course, as it loads a mere reference movie, and fails to load the AV-content, as the master movie file cannot be found at the given filepath anymore.
Solution 1 (for the "tidy" users):
Make sure the filepath to your Aperture Library does not change (volume name, user name, custom library name), and hopefully Apple does not change their Aperture Library filepath scheme in future updates. Then the reference movie will remain pointing to a valid master file.
Solution 2:
In Aperture, select the file(s)
File > Export Master (CMD-SHIFT-S)
Save file(s) to your desired destination
Import them into within Final Cut Pro
Of course this creates unnecessary duplicate content, which is specially painful with video files, which tend to be large.
Solution 3 (advanced users):
Locate the master file (within the Aperture Library.aplibrary bundle) and import that in Final Cut Pro.
The import dialogue of many Mac OS X apps does not allow browsing into bundles.
A possible work around is to open the bundle in Finder (right click > Show package contents), locate the file, and then drag'n'drop it onto the import dialogue of Final Cut Pro.
Message was edited by: putzfetzenORG. Added post title.

PROBLEM with Importing video to an external drive

I am unable to import video directly onto an external drive. Whilst the ext drive shows up fine in Finder, I do not get this option on the import drop down menu. Yesterday i spent an hour with the Genius guys in the Regent St Apple Store. They both said that they'd done this before, but were both unable to get it to work on their hardware. It appears it should work, but doesn't!! We tested on mac formatted ext drive so it wasn't a pc formatting issue with the drive.
The guys at Apple said maybe it was a problem with a recent update to imovie which to me sound unlikely!
I use the latest version of iMovie 09, Snow Leopard & a Mac book (2yrs old)
Any ideas really appreciated
Thanks in advance

Several things are not officially supported by hardware and software manufacturers, but that does not prevent them from working very effectively. I have used LaCie firewire drives on many occasions on the same firewire bus as my DV source without any difficulty. I think that the settup that you propose will be potentially more problematic than using the same firewire bus. The reasoning for this opinion is that USB does not constant guarenteed bandwidth where firewire does. Theoretically speaking USB sould work under optimal conditions and there are some people using it, however I have heard of far more problems with the USB drives than firewire.
Things to look for in an external firewire drive include an oxford 911 or better bridge board and a drive speed greater than 7200 RPM. I have used 5400 RPM drives without any problems, but others have had problems with these as well.
Canon cameras have several quirks that have proved problematic when trying to integrate them as a source into video production settings. You may want to invest in a stand-alone deck or alternate brand camera to import your footage. This does not mean you can't try to use the Canon as a source. Several people do on a daily basis without difficulty. I would recommend trying what equipment is most easily availablr to you and determining what works best with your configuration.
Reguards,
Dave F

Problems with importing video tape into iMovie '08

I'm using a canopus advc 110 to import video tapes from a vhs recorder into iMovie. BUT, the process often stops after only a few minutes when I still have a long way to go. I'd like to be able to leave it to work for 20-minute chunks (longer if possible, but I think that's about the limit), but it keeps stopping after a few minutes. When I come back in the room, it keeps trying to import (time in upper right corner keeps going) but had quit earlier according to time on the lower center of the iMovie screen. This is adding to my frustration and time, which is limited. Any suggestions??

The canopus advc 110 will work IF you have a perfect tape.
Look at the Grassvalley ADVC300 it has the ability to compensate for bad tapes. Using Line Time Base Correction (LTBC), ADVC300 instantly cleans, stabilizes and preserves old VHS and Hi8 videos in clean DV format. No need to monitor, just start and forget. Fast forward the tape all the way and then rewind all the way before import will never hurt.
The program that comes with the ADVC300 has some nice filters that can improve video and audio of the source material. The ADVC300 will take Audio and Video from any source and convert it to FireWire (iMovie will treat it like a camera).
http://www.grassvalley.com/products/advc300
The ADVC300 is for anyone who wants to do editing and is concerned about quality of color and speed, for the novice it is an incredible gizmo that will restore VHS tapes to a state close to the original fixing midtones, highlights and shadows on the fly. Not only can you simply convert analog to digital you can actually manipulate the signal going in (if you want to).
A bit pricey bit it WORKS.
I would use iMovie 06 with iDVD 08/09.
iMovie 08 and 09 uses 'single field processing' meaning every other horizontal line of the video is thrown out, which reduces the sharpness of the footage. iMovie 06 uses ALL of the image to form the video.
Your workflow is editing DV clips and making DVDs, so iMovie 06 is better suited. Your movie will arrive at iDVD in DV format, which is an ideal match for making a DVD: same resolution, same pixels aspect ratio, and original quality. If you share your movie from iMovie 09, it gets re-rendered at 640x480 or less, and then iDVD upscales it back to 720x480. The end result is obviously not as good.
iMovie 06 and iDVD 08/09 is a "lossless" combination.
iMovie 09 is a wonderful programs assuming that you're using it for what it was designed to do, assemble videos to share on the Internet.

Problems with importing video frames to layers

Whenever I try to import video frames to layers (File > Import > Video Frames to Layers), the little preview box of the video doesn't show up, and when I click "Okay" it only creates a bunch of solid black layers. I'm using .avi videos, which should be compatible. Can anyone help me out? :/

Also, you can make sure your system is 64 bit capable by:
Open Performance Information and Tools by clicking the Start button , clicking Control Panel, clicking System and Maintenance, and then clicking Performance Information and Tools.
Click View and print details.
In the System section, you can see what type of operating system you're currently running under System type. Under 64-bit capable, you can see whether you can run a 64-bit version of Windows. (If your computer is already running a 64-bit version of Windows, you won't see the 64-bit capable listing.)

Compatibility problem with Imported videos taken from Galaxy S2's Camera

Hi,
I have several video files taken from galaxy s2 in various sizes ( 720*480, 1280*720,...).
I imported them to iPhoto'11 on my mac with other photos successfully but failed to sync them with my iPad through iTunes.
It said "The video format is not supported by the iPad"...
I checked the video files with MediainfoMac application and they're encoded with H.264 which is supported by ipad.
I even converted them with avidemux ( copying video, re-encoding audio with FAAC) which used to work for many mkvs and avis, but syncing them also failed...:(
I know I can sync them if I re-encode whole file, but still I can't understand why the mp4 video file from galaxy s2 are not compatible with ipad!
Here's a file information taken from MediaInfoMac application. Please someone let me know why this file format is not supported by ipad...
* * * MediaInfo Mac 0.7.36.0 file analysis report.
* * * MediaInfo Mac is ©2010 by Diego Massanti - http://mediainfo.massanti.com
* * * MediaInfoLib by Jerome Martinez - http://mediainfo.sourceforge.net
Created on: May 31, 2011 7:33:07 PM GMT+09:00
Report for file: abcde.mp4.mp4
General / Container Stream #1
          Total Video Streams for this File.................1
          Total Audio Streams for this File.................1
          Video Codecs Used.................................AVC
          Audio Codecs Used.................................AAC LC
          File Format.......................................MPEG-4
          Play Time.........................................51s 725ms
          Total File Size...................................21.8 MiB
          Total Stream BitRate..............................3 538 Kbps
          Title (Tag).......................................abcde.mp4
          Encoded with......................................Lavf52.61.0
Video Stream #1
          Codec (Human Name)................................AVC
          Codec (FourCC)....................................avc1
          Codec [email protected]
          Frame Width.......................................720 pixels
          Frame Height......................................480 pixels
          Frame Rate........................................29.618 fps
          Total Frames......................................1532
          Display Aspect Ratio..............................3:2
          Video Standard....................................NTSC
          Scan Type.........................................Progressive
          Color Space.......................................YUV
          Codec Settings (Summary)..........................1 Ref Frames
          QF (like Gordian Knot)............................0.333
          Codec Settings (CABAC)............................No
          Codec Settings (Reference Frames).................1
          Video Stream Length...............................51s 725ms
          Video Stream BitRate..............................3 406 Kbps
          Video Stream BitRate Mode.........................VBR
          Bit Depth.........................................8 bits
          Video Stream Size.................................21.0 MiB (96%)
Audio Stream #1
          Codec.............................................AAC
          Codec (FourCC)....................................40
          Audio Stream Length...............................51s 641ms
          Audio Stream BitRate..............................128 Kbps
          Audio Stream BitRate Mode.........................VBR
          Number of Audio Channels..........................2
          Audio Channel's Positions.........................Front: L R
          Sampling Rate.....................................44.1 KHz
          Audio Stream Size.................................806 KiB (4%)

Tim, that's a good thought.
The Mac I hooked the iPod up to is running iTunes 4. However, I did not sync the iPod to it, I answered "No" to all queries to sync to the computer.
This of course doesn't mean that the presence of iTunes 4 on the Mac didn't screw up the iPod, but I think that would have to be considered a bug that should be fixed since you ought to be able to recharge your iPod on any computer's USB port without screwing up your library regardless of what version of iTunes it is running as long as you don't attempt to sync the two machines. Hopefully someone from Apple will look into whether this is indeed the problem and if so, fix it.
Interestingly, I discovered my music videos and tv shows under the /Music/Playlists/Purchased (but NOT my purchased music!), and I can play the music videos back that way, but it only plays the audio and the first frame of the video as if it were album art. The tv shows won't play back at all, apparently.
I suspect you are correct that iTunes 4 accessed the iPod without permission and screwed things up. Hopefully Apple can fix that since I regularly visit people who don't keep all their software updated to the latest versions due to having dial-up internet or other reasons (which, after all, aren't really my business).
Thanks for the help.

Problems with importing video to ipod

i have some video on my computer that i am trying to coppy to my ipod, i tryed the import metod or the drag and drop metod but it didnt work,
can anybody help me with this?

Frequently asked questions about viewing and syncing video with iTunes and iPod
http://docs.info.apple.com/article.html?artnum=302758
GUIDES TO: Converting Video for iPod - Mac & Window
http://forums.ilounge.com/showthread.php?s=&threadid=123067
Patrick

Got problem with import video to layers

Hai i'm cs 3 user. I want to make a gifs using music video.
But when I tried to import the video, it said 'could not complete the video frames to layers command because the movie file could not be open'
Imy video format is FLV.. but when i tried with other format, same thing happen. So could any one here help me?

Photoshop was the answer I was looking for. I'm moving your question to the forum here: http://forums.adobe.com/community/photoshop/general

Problem with importing videos onto itunes?? please help!!

i can't figure out how to upload videos onto my itunes video library.. i don't know what to do

Hard to help with so little information.
What videos? From where?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

haben
From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
presets there for the QuickTime choice there.
What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30) or something else? Do you know if this camera is recording with a variable or
a constant frame rate?
Please review and consider and then we will decide what next.
Thank you.
ATR

Premiere Pro CS5: please help problem with importing a file error output "there was an error decompressing audio or video"

please help problem with importing a file error output "there was an error decompressing audio or video"

this is related to what adobe program/version?

Problems with importing in FCPX

I am having problems with importing my recent holiday video intoFCPX I have copied all the files from my Panasonic camera into my separate hard drive and they all appear there correctly.
When I connect the camera to the computer it automatically opens in iPhoto which is a nuisance as I have to stop it from doing so.
Now comes the problem when I ask to import media into a new project FPCX simply freezes and stops responding.
If I ask FPCX to import direct from the camera it says it can't re-import because all the material is already in the second hard drive where I store my projects.
So in a nutshell the programme simply does not respond to importing.
Any help please or is this a technical problem I have with my Mac.
Thanks
A new iMac version 10.9.2
OS Mavericks
FPC up dates are all installed

First, what specific camera are you using?
Next, create a folder on your hard drive, give it a name you'll recognize, then copy the entire contents of your camera card into it, keeping the full file/folder heirchy in tact. Disconnect the camera. Then import from that folder.
What do you mean specifically when you say "the programme simply does not respond to importing"? That is sort of a vauge statement.
Finally, go into the Preferences of iPhoto, you can set it to NOT open when you plug your camera in, and never have that happen any longer.

Problem with importing images into time lapse

Hi
I am having problems with importing still images into a time lapse sequence in photoshop and would appreciate any suggestions!
I want to create a time lapse using a sequence of still photographs. All file names are sequentially name/numbered.
I am using the Motion workspace, and have followed all of the instructions available.
Create correct sized new document (film & video).
Create video timeline.
Set frame rate.
Choose 'create new video layer from file'.
Point to first image in the folder where the images are stored.
At this point, no matter what I have tried, I receive this error:
I have tried different sized new documents; tried jpegs and tiffs; tried different frame rates, tried different qualities and sizes of images; tried selecting the last image instead of the first (one recommendation).
If I use the 'Place' command from the file menu (and check the 'image sequence' box) instead of selecting 'Create new video layer' from the layers panel, it loads fine and I can still render the video.
It took me most of a day to discover this workaround, but every other reasonable 'how-to' that I can find says that I should be able to do it by opening files into a new video layer and it seems as though the new video layer option may give me more alternatives.
Anyone have any idea why I could be having these problems?
I have reset Photoshop, deleted the settings file, even reinstalled it. I use 64-bit on windows 7 and even installed the 32-bit to try that, but all with the same result.
Stuart

Unfortunately, yes--I've tried it that way over and over, and every other way I could think of. The files are all in one folder, and I've converted the raw files to both tiffs and jpegs. I even tried converting them to jpegs at the final pixel dimensions. Each folder that I have used only contains one type of file, and they are all part of the same sequence and sequentially numbered. I have even tried renumbering the files with numbers first, numbers last, numbers only, moving underscores. I moved the files from my external hard-drive to the desktop ... I have a lot less hair than I had only a few days ago!
I've looked at a few other tutorials that outline the same sequence of steps, and tried them over and over, and then changing one step at a time to make sure that it was not a single step that caused the problem.
The thing that is really bugging me is that it works fine if I use the different approach of using the place command instead.
Anyway, thanks for all of your time. It's going to be a lot simpler to just stick with 'place' command and I will likely do that, but I tend take things like this as a challenge. I like to know WHY it won't work for me. Sometimes it seems that there is just no logical explanation!
Stuart

Problem with sync video and audio

Hi
Problem with sync video and audio
1- capture video ( Telecinema dv pal)
2- conform 25 to 24
3- import timeline audio and video
4- sync
5- Link
6- make sub-clip
7- new name
---- error
Sequence Error: Unable to add clip to sequence.
Possible media limits problem in clip or sequence.
FINAL CUT PRO IS DONE.
HELP ME.
THX

exactly why are you converting 25 to 24?

Problem with importing video

Similar Messages

Maybe you are looking for