Problem with in type ComboBoxCollum in grid
Hi,
I try to load one collum type ComboBoxCollum in my grid and received this message:
Unable to cast COM object of type 'SAPbouiCOM.GridColumnClass' to interface type 'SAPbouiCOM.ComboBoxColumn'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{85ACCB19-F239-478D-9386-41B3132B55F2}' failed due to the following error: Não há suporte para esta interface (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)).
my code where occurs the failed is:
oGrid.Columns.Item(2).Type = SAPbouiCOM.BoGridColumnType.gct_ComboBox;
gridComboCol = (SAPbouiCOM.ComboBoxColumn)oGrid.Columns.Item(2);
thanks.
Hi,
What was the data type of you variable named gridComboCol?
Please try this one.
SAPbouiCOM.ComboBoxColumn gridComboCol;
oGrid.Columns.Item(2).Type = SAPbouiCOM.BoGridColumnType.gct_ComboBox;
gridComboCol = oGrid.Columns.Item(2);
Hope this solve your problem.
Regards,
Lee
Similar Messages
-
Problems with letter type homepage www.JO-qigong.nl When I want to make another type it changes the whole page? Why?
Thank you for responding. I am sure that I selected the text. I don't do anything different than I did many times before. But if I change a text know, for exemple in the color Red, than other text, that I didn't selected, get a different text: bigger text or other color. In iWeb everything is OK, but when I publish it, than there are those grazy changes. I use iWeb for 3 years now and had no problems till now.
Is it because the software is not supported anymore by Apple, because you can not update the software anymore. It is a pitty, because I like iWeb. It is easy to work with. -
Problem with mime type in web.xml file
Hi everybody,
I actually got a problem with mime types on Weblogic 6.0 under Linux.
I read the documentation so I added the next lines in the web.xml file in
the WEB-INF directory of my server :
<mime-mapping>
<extension>
doc
</extension>
<mime-type>
application/msword
</mime-type>
</mime-mapping>
<mime-mapping>
<extension>
ppt
</extension>
<mime-type>
application/vnd.ms-powerpoint
</mime-type>
</mime-mapping>
Why can't I retrieve a .doc or .ppt files with an internet browser correctly
? I get only text/plain ...
Can someone help me ?
Regards,
Alexis BergerI am having the same problem with doc and xsl. I have added this
<mime-mapping>
<extension>xls</extension>
<mime-type>application/vnd.ms-excel</mime-type>
</mime-mapping>
<mime-mapping>
<extension>doc</extension>
<mime-type>application/msword</mime-type>
</mime-mapping>
to my web.xml. I even restarted the server. I still see doc and xsl in binary.
Is there some other setting that needs to take place?
I am using WL6.1 with fixpack 1.
I can see the doc and excel files in the browser if I don't go through the weblogic
server. That just confirms it's not my browser.
Kumar Allamraju <[email protected]> wrote:
<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
It works fine for me in 6.1 SP1.
<br><br>
If the following doesn't work , can you
<br>try application/winword instead of application/msword?
<p>--
<br>Kumar
<p>Siming Mu wrote:
<blockquote TYPE=CITE>Hi,
<p>I setup in my web.xml a mime mapping as follows,
<p><mime-mapping>
<br><extension>doc</extension><mime-type>application/msword</mime-type>
<br></mime-mapping>
<p>When I specify a test.doc url, the doc file appears in my browser
as
binary data
<br>instead of download.
<p>Please reference change request 055002, which decribes this problem.
According
<br>to edocs, it has been fixed in wls6.1sp1.
<p>But I am seeing it fixed. Am I doing anything wrong? Thanks.
<p>Siming</blockquote>
</html> -
How do fix problem with iPages - type does not enter - ?
How do I fix this problem with Pages - type from keyboard does not enter ? If I need to re-install, How do I do that?
Hello DonAndNorma,
You may need to uninstall, then reinstall the Pages application. Steps for doing so can be found in the article linked below.
OS X Mavericks: Install, update, and uninstall apps
http://support.apple.com/kb/PH14299
Cheers,
Allen -
Problem with numeric types in Abap Proxy
Hello,
We are having problems with some abap proxy calls. When a numeric type is filled with 0 the node it´s automatically removed and no value it's recived in XI. The only way I have found to avoid this problem it's to define the field with type string or change the cardinality to 1..1 instead of 0..1. It's there any way to maintain the type and the cardinality?? Maybe with a pattern??
Regards,
Alberto Pla.Hi Alberto
I had this problem, and I decided to use xsd:string instead of xsd:integer. This will solve the issue.
Anyway.. check this note:
[Note 1242795 - Mapping of XSD default values by ABAP Proxy Generation|https://service.sap.com/sap/support/notes/1242795]
Regards
Francesco -
Hello,
I have problem with some files that are located in Library / Quicktime.
I have 7 files in that folder and all are .component files.
3 of them used to look like a lego block :
DivX Encoder.component
macam.component
MayaIFF.component
But today, I have accidentally change them into folders (and I don,t Know how...) So instead of having thoses 3 files with the lego block icon , I have 3 folders and If I click on thoses folder, It open like a standard folder, so I see the "content" folder inside them...
How can I change it back to the .component file type they should be... I know how to change the type of a file, but since they are now folders, there's no "file Type" associated with them (right click / infos)...
Help !There are lots of things that are in fact folders, but the Finder treats them as "files"--in the sense that normally when you select one you cannot see the contents of the folder. One way this is done is by the use of certain extensions, for instance .app, .pkg, .mpkg, .bundle and .component all tell the Finder to NOT display the folders as folders. If you do a GetInfo on them and the name is still "whatever.component" and the Kind: Component is still showing, and you haven't noticed any problem with QuickTime, then don't worry about it.
Those are all third party QT components. If they aren't working, you may have to reinstall them from the original source.
Francine
Francine
Schwieder -
Problem with field type STRING in table
Hi Experts,
I am new to ABAP. I have created a new transparent table which hold error info. One of the field has to store data of size about 1500 char.
Since CHAR type is not acceptable for this field So I gave STRING type. Now when I try to create a TABLE parameter in a RFC enabled functional module using "LIKE YERROR" Then I get a error:
"YERROR must be a flat structure. You cannot use internal tables, strings, references, or structure as component"
Why is this error? How to resolve it? Is it because I have used a field of type STRING in the table? If this is the problem then what other type can I use?
What are other know problems with using STRING type?
Please help!
Thanks
GopalHi,
Try to declare it as type LCHR , it can hold up to 32000 chars.
Regards
vijay -
Dynamic ITAB copy problem with field type P
Hello everyone
I need to copy the structure of an internal table that is pass by reference into a method.
Actually everything is fine else than the field type P with decimal is not created properly in the new itab.
Scenario:
An internal table is pass by reference to a method. We need to trait the data without modifying the original table. The Idea is to copy the structure and the data of the referenced internal table into an internal table created dymanically in the method.
Here is what I did and working fine when there are no field of data type "CURR".
Extract the structure of the reference data.
Create a dynamic internal table.
So far so good. Everything seams to work fine. BUT
when I am trying to copy the data from the reference table to the just created internal table the field with data type "CURR" doesn't work.
Here is my example:
FIELD-SYMBOLS: <FS_TABLE> TYPE STANDARD TABLE,
<TMP_TABLE> TYPE STANDARD TABLE,
<LS_TMP_TABLE> TYPE ANY,
<LS_TABLE> TYPE ANY,
<LS_VALUE> TYPE ANY.
DATA: lt_data TYPE STANDARD TABLE OF vbak,
ls_data LIKE LINE OF lt_sortfield,
ref_data TYPE REF TO data,
l_structure TYPE REF TO DATA,
lv_ltname TYPE string.
select * from vbak UP TO 10 rows INTO CORRESPONDING FIELDS OF TABLE lt_data.
* --- Assign the reference variable to the table
* ---- Only use to simulate a parameter that is assign to a reference to a internal table
unassign <FS_TABLE>.
lv_ltname = 'lt_data[]'.
ASSIGN (lv_ltname) to <FS_TABLE>.
GET REFERENCE OF <FS_TABLE>[] INTO ref_data.
* --- Assign the reference to the field-symbol
UNASSIGN <FS_TABLE>.
ASSIGN ref_data->* TO <FS_TABLE>.
* --- Create a working area for the reference table to a field-table
CREATE DATA l_structure LIKE LINE OF <FS_TABLE>.
ASSIGN l_structure->* TO <LS_TABLE>.
* --- Retrieve the structure of the field-symbol pointing to the internal table
DATA: lr_tabledescr TYPE REF TO cl_abap_tabledescr, " Internal Table description
_r_structdescr TYPE REF TO cl_abap_structdescr.
lr_tabledescr ?= cl_abap_tabledescr=>describe_by_data( <fs_table> ).
_r_structdescr ?= lr_tabledescr->get_table_line_type( ).
* --- Read internal table structure to create dynamic internal table
data: ls_struc like LINE OF _r_structdescr->components,
xfc type lvc_s_fcat,
ifc type lvc_t_fcat.
* --- Why the field (component) NETWR length is now 8 instead of 15?
LOOP AT _r_structdescr->components into ls_struc.
clear xfc.
xfc-fieldname = ls_struc-name .
xfc-datatype = ls_struc-type_kind.
xfc-inttype = ls_struc-type_kind.
xfc-intlen = ls_struc-length.
xfc-decimals = ls_struc-decimals.
append xfc to ifc.
ENDLOOP.
DATA: dy_table type ref to data,
* --- Create dynamic internal table
call method cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = ifc
IMPORTING
ep_table = dy_table.
* --- assign reference internal table to Field-symbol
assign dy_table->* to <tmp_table>.
unassign <ls_tmp_table>.
DATA: ls_tmp_struc type REF TO DATA.
CREATE DATA ls_tmp_struc like LINE OF <tmp_table>.
ASSIGN ls_tmp_struc->* TO <ls_tmp_table>.
Loop at <fs_table> INTO <LS_TABLE>.
MOVE-CORRESPONDING <ls_table> TO <ls_tmp_table>.
APPEND <ls_tmp_table> TO <tmp_table>.
ENDLOOP.
* <fs_table>-netwr length is 15
* <ls_tmp_table>-netwr length is 8
* ??????????? Why the length is different?
* ??????????? It should a structure copy and have the
* ??????????? same length
I use VBAK as example, and the field NETWR is using data type "NETWR_AK" where it us a data type "CURR" with length 15 and decimal 2.
When reading the structure, the method get_table_line_type of the class cl_abap_tabledescr return a length of 8 instead of 15.
Any idea how to get the exact structure of a variable that is refering to a data type?
Regards
DanielHello Everyone
Thank you for your replies.
I think I didn't explain myself clearly.
My goal is to be able to create an exact structure copy of a "Type ref to data" into a new internal table that is not defined yet.
Example:
A method contain a parameter that is a ref to DATA type.
That parameter is refering to an internal table from the calling program.
Now I want to create an internal table into the method where this one will be an exact structure copy of the parameter.
So, lets put some name here.
parameter: ip_data type ref to data.
FIELD-SYMBOLS: <FS_REF_DATA> TYPE STANDARD TABLE,
<FS_CP_DATA> TYPE STANDARD TABLE.
ASSIGN ip_data->* TO <FS_REF_DATA>.
" some code to assign the same structure to <FS_CP_DATA> from <FS_REF_DATA>
" than copy the data from <FS_REF_DATA> to <FS_CP_DATA>.
<FS_CP_DATA> [ ] = <FS_REF_DATA> [ ]. " This is working if no type P with decimal exist into the structure
" Than I can play with the data of <FS_CP_DATA> without modifying the data of <FS_REF_DATA>.
My problem would be solved if I can create dynamically an internal table that has an exact structure copy of the passed parameter.
Regards
Daniel -
Hello,
I am trying to export a video and I'm stuck at 0%. The file in the video is a .mp4 that I downloaded from my own Youtube page. I have the same problem with any project containing this type of file. I have tried to export as .mov, .Mpeg, .wmv, .avi, with the same results.
I am able to export videos that contain other sorts of files without difficulty.
I am using a PC. Adobe Premiere Elements 12.
Any assistance will be greatly appreciated.
Thank you!
TravisTravis
Do you have the latest version of QuickTime installed on your computer with Premiere Elements 12?
Sides mentions....
Have you updated from 12 to the 12.1 Update? If not, please do so using an opened project's Help Menu/Update.
What is the computer operating system in use.
Are you running the program from a User Account with Administrative Privileges?
We will be watching for your results.
Thank you.
ATR -
Data loading problem with Movement types
Hi Friends,
I extarcted data using the data source General Ledger : Line itemdata (0fi_gl_4) to BW side.
Problem is Movement Types for some documents missing.
But i checked in rsa3 that time showing correctly.
i restricted the data in bw side infopackage level only particular document that time data loading perfecly.
this data source having 53,460 records.among all the records 400 records doc type 'we' movement types are missing.
please give me solution for this how to loading the data with movement types.
i checked particular document of 50000313 in RSA3 it is showing movement types. then i loaded data in bw side that time that movement types are not comming to be side. then i gave the particular doc 50000313 in infopackage level loading the data that time movement types are loading correctly. this extaractor having 55000 records.
this is very urgent problem.Please give me reply urgenty. i am waiting for your's replys.
Thanks & Regards,
Guna.
Edited by: gunasekhar raya on May 8, 2008 9:40 AMHi,
we enhanced Mvement type field(MSEG-BWART) General ledger (0FI_GL_4) extractor.
this field populated with data all the ACC. Doc . number.
Only 50000295 to 50000615 in this range we are not getting the movement types values.
we didn't write any routines in transfer and update rules level.
just we mapped to BWART field 0MOVETYPE info object.
we restrict the particular doc no 50000313 infopackage level that time loading the the data into cube with movement types.
but we remove the restriction infopackage level then loading the data that time we missing the movement types data of particular doc no 50000295 to 50000615.
Please give mesolution for this. i need to solve this very urgently.
i am witing for your reply.
Thanks,
Guna. -
Problem with DB2 Type 4 driver
Hi
The problem has been narrowed down to a problem with the IBM DB2 Type 4
driver (COM.ibm.db2.jdbc.net.DB2Driver). In some situations, it introduces a
100ms delay when sending parameters for a prepared statement (846 bytes in
the truss trace below). With the IBM app driver (type 2) we get the
performance that we expect.
In other words, this has to do with TCP/IP communication and whether this is
a JVM, DB2 or Solaris issue we don't know. Probably a combination.
Regards
Steffen Jensen
Nordija
Below, the Solaris truss trace that shows how the JDBC driver (in the WLS
VM) sends data and how the DB2 listener process receives it.
WLS
24092: 5.6607 send(7, "\001\0\003 N", 6, 0) = 6
24092: 5.6611 send(7, "\0 O\001\004\001FFE7FFFB".., 846, 0) = 846
24092: 5.6682 poll(0xFEC07A50, 0, 10) = 0
24092: 5.6882 poll(0xFEC07A50, 0, 10) = 0
24092: 5.7082 poll(0xFEC07A50, 0, 10) = 0
24092: 5.7282 poll(0xFEC07A50, 0, 10) = 0
24092: 5.7482 poll(0xFEC07A50, 0, 10) = 0
24092: 5.7625 read(7, "\0", 1) = 1
DB2 listener
24109: 5,6607 recv(5, "\001", 2, 0) = 2
24109: 5,6617 recv(5, "\0\003 N", 4, 0) = 4
24109: 5,7583 recv(5, "\0 O\001\004\001FFE7FFFB".., 846, 0) = 846
24109: 5,7606 semop(2883608, 0xFFBED4C0, 1) = 0
24109: semnum=0 semop=1 semflg=0
24109: 5,7618 semop(2883608, 0xFFBED5C0, 1) = 0
24109: semnum=1 semop=-1 semflg=0Hi
The problem has been narrowed down to a problem with the IBM DB2 Type 4
driver (COM.ibm.db2.jdbc.net.DB2Driver). In some situations, it introduces a
100ms delay when sending parameters for a prepared statement (846 bytes in
the truss trace below). With the IBM app driver (type 2) we get the
performance that we expect.
In other words, this has to do with TCP/IP communication and whether this is
a JVM, DB2 or Solaris issue we don't know. Probably a combination.
Regards
Steffen Jensen
Nordija
Below, the Solaris truss trace that shows how the JDBC driver (in the WLS
VM) sends data and how the DB2 listener process receives it.
WLS
24092: 5.6607 send(7, "\001\0\003 N", 6, 0) = 6
24092: 5.6611 send(7, "\0 O\001\004\001FFE7FFFB".., 846, 0) = 846
24092: 5.6682 poll(0xFEC07A50, 0, 10) = 0
24092: 5.6882 poll(0xFEC07A50, 0, 10) = 0
24092: 5.7082 poll(0xFEC07A50, 0, 10) = 0
24092: 5.7282 poll(0xFEC07A50, 0, 10) = 0
24092: 5.7482 poll(0xFEC07A50, 0, 10) = 0
24092: 5.7625 read(7, "\0", 1) = 1
DB2 listener
24109: 5,6607 recv(5, "\001", 2, 0) = 2
24109: 5,6617 recv(5, "\0\003 N", 4, 0) = 4
24109: 5,7583 recv(5, "\0 O\001\004\001FFE7FFFB".., 846, 0) = 846
24109: 5,7606 semop(2883608, 0xFFBED4C0, 1) = 0
24109: semnum=0 semop=1 semflg=0
24109: 5,7618 semop(2883608, 0xFFBED5C0, 1) = 0
24109: semnum=1 semop=-1 semflg=0 -
Problem with Column types and String
Hi
I have some problem while comparing against empty string.
My column is of type it_Linked_Button. Actually it seems that column type doesn't matter.
If cell that belongs to this column is empty and based on other columns' values I put some value into this cell.
It works fine.
But when I clear that cell and try to put some value again nothing happens.
In my if statement I'm checking against empty string and it fails second time.
Before I put anything in that cell (in debugger) that value is "" so it is empty and it works.
(OK, I see that after I posted this message it was slightly reformated)
But after I put something and clear that cell and try to put something again (in debugger) I get "(here is some long space) " which fails String.IsNullOrEmpty(var) test.
What is going on? Has it something to do with Column type?
How to clear it so I can put something in it again?
One more thing - to put values and clear it I use DbDataSource SetValue method. And String.Empty or ""(doesn't matter)
Thanks
Kamil
NOTE
I made some workaround that gives me the behaviour I want but still I would like to know what is going on?
Edited by: Kamil Wydrzycki on Sep 24, 2009 12:57 PMDrLaszloJamf wrote:
warnerja wrote:
DrLaszloJamf wrote:
1. Could you define an Enum? Then you could switch on enum values.
2. Wait for Java 7 which is supposed to extend switch to strings?3. Put the target strings in a collection, write a loop to find the match in the collection and use the matching index in the switch statement. At least that will get rid of the hashcode kludge, where it won't mistakenly 'match' a string which isn't the actual target.3b: Map<String, Command>Yep.
I also wanted to point this out to the OP:
For example, let's say the 7 character string "BugABoo" happens to have the same hashcode as "EDI_DOC". And let's say your input just happens to have the string "BugABoo" in it, where you're extracting the 7 character substring. See the problem? You're getting "BugABoo" but treating it as if it really were "EDI_DOC", by virtue of comparing hashcodes instead of actual strings.
OOPS! -
FrameGrabbingControl - grab frame problem with video type
Hi all
I have a problem with extracting frames from a video.
Currently I am able to extracting video from some avi formats. But this method does not works for many formats. like mpg etc...
The FrameGrabbingControl object return null for many formats.
This is my code
public Player getVideoPlayer() throws Exception
if (videoPlayer == null)
File file = new File("E:\\Songs\\English\\Video\\Alizee\\20090209114235.avi");
MediaLocator videoMediaLocator = new MediaLocator(file.toURL());
videoPlayer = Manager.createRealizedPlayer(videoMediaLocator);
return videoPlayer;
public FrameGrabbingControl getFrameGrabCntrl() throws Exception
if (frameGrabCntrl == null)
frameGrabCntrl = (FrameGrabbingControl) getVideoPlayer().getControl("javax.media.control.FrameGrabbingControl");
return frameGrabCntrl;
// frame extract method
public Image captureCurrent() throws Exception
Buffer frame = getFrameGrabCntrl().grabFrame();
BufferToImage stopBuffer = new BufferToImage((VideoFormat) frame.getFormat());
return stopBuffer.createImage(frame);
}Here are some 3 sample media information I have tested with the program. First two works fine but 3rd one does not works.
// taken from http://www.exactfutures.com/index02.htm and downloaded http://www.exactfutures.com/vid2jpg.zip
// WORKS FINE
General
Complete name : E:\Songs\English\Video\Alizee\testcam04.avi
Format : AVI
Format/Info : Audio Video Interleave
Format/Family : RIFF
File size : 1.88 MiB
PlayTime : 29s 596ms
Bit rate : 533 Kbps
Video #0
Codec : Indeo 4
Codec/Info : Intel Indeo Video 5.0 Wavelet
PlayTime : 29s 596ms
Bit rate : 528 Kbps
Width : 320 pixels
Height : 240 pixels
Aspect ratio : 4/3
Frame rate : 3.818 fps
Bits/(Pixel*Frame) : 1.801
// recorded video from a webcam
// WORKS FINE
General
Complete name : C:\Program Files\MSI\MyGuard Live\VideoClip\20090209114235.avi
Format : AVI
Format/Info : Audio Video Interleave
Format/Family : RIFF
File size : 311 KiB
PlayTime : 3s 200ms
Bit rate : 710 Kbps
Video #0
Codec : Indeo 4
Codec/Info : Intel Indeo Video 5.0 Wavelet
PlayTime : 3s 200ms
Bit rate : 705 Kbps
Width : 640 pixels
Height : 480 pixels
Aspect ratio : 4/3
Frame rate : 15.000 fps
Bits/(Pixel*Frame) : 0.153
// downloaded avi sample video
// NOT WORKS
General
Complete name : E:\Songs\English\Video\Alizee\fvss_demo.avi
Format : AVI
Format/Info : Audio Video Interleave
Format/Family : RIFF
File size : 10.3 MiB
PlayTime : 2mn 300ms
Bit rate : 715 Kbps
Video #0
Codec : MS Video
Codec/Info : Microsoft Video 1
PlayTime : 2mn 300ms
Bit rate : 638 Kbps
Width : 160 pixels
Height : 120 pixels
Aspect ratio : 4/3
Frame rate : 10.000 fps
Bits/(Pixel*Frame) : 3.325
Audio #1
Codec : PCM
Codec/Family : PCM
Codec/Info : Microsoft PCM
PlayTime : 2mn 300ms
Bit rate : 64 Kbps
Channel(s) : 1 channel
Sampling rate : 8000 Hz
Resolution : 8 bitsI think problem is the codec. Am I correct?
Could anyone please tell me why can't I use this FrameGrabbingControl object to extract frames?deshan wrote:
Currently I am able to extracting video from some avi formats. But this method does not works for many formats. like mpg etc...
The FrameGrabbingControl object return null for many formats.That's expected behavior when the codec doesn't support capture...
Could anyone please tell me why can't I use this FrameGrabbingControl object to extract frames?Because it's not supported for that format.
But T.B.M. and I have recently worked on / posted a workaround that should capture any video format that JMF can play.
[http://forums.sun.com/thread.jspa?messageID=10596692#10596692] -
Problems with enumerated type and DataSocket
I am publishing an enumerated type variable using DataSocket write and I am having problems subscribing to this with other clients on the network. I can get the program to work ok if I replace the enumerated type with a straight numeric or a Text Ring for example. Is there anything special I should be looking out for when using enumerated types in this type of application.
Thanks KellyUpdating to the latest version of LabVIEw (6.0.2) should correct this problem:
http://digital.ni.com/softlib.nsf/websearch/F983BDA17B8F401B862569EC005A11C2
Also, I would suggest updating to the latest version DataSocket:
http://digital.ni.com/softlib.nsf/web%2Fall%20software?OpenView&Start=1&Count=500&Expand=6#6
Chris_Mitchell
Product Development Engineer
Certified LabVIEW Architect -
Web service call problem with complex types input
We are trying to call a web service and pass as parameter
some complex types. When invoking the web service everything works
well on flex side, but on the server side the input parameters we
get from flex are not correct - complex type is removed and the
elements of the complex type are sent. See the example:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute">
<mx:WebService id="ws_id" wsdl="link" useProxy="false"
fault="wsFault(event)">
<mx:operation id="op_id" name="op"
result="wsResult(event)">
<mx:request>
<parameters>
<parameter1>{value1}</parameter1>
<parameter2>{value2}</parameter2>
<parameter3>{value3}</parameter3>
<parameter4>
<parameter4_1>{value4_1}</parameter4_1>
<parameter4_2>{value4_2}</parameter4_2>
<parameter4_3>{value4_3}</parameter4_3>
</parameter4>
</parameters>
</mx:request>
</mx:operation>
</mx:WebService>
</mx:Application>
on server side we get this:
<parameters>
<parameter1>{value1}</parameter1>
<parameter2>{value2}</parameter2>
<parameter3>{value3}</parameter3>
<parameter4_1>{value4_1}</parameter4_1>
<parameter4_2>{value4_2}</parameter4_2>
<parameter4_3>{value4_3}</parameter4_3>
</parameters>
Instead of :
<parameters>
<parameter1>{value1}</parameter1>
<parameter2>{value2}</parameter2>
<parameter3>{value3}</parameter3>
<parameter4>
<parameter4_1>{value4_1}</parameter4_1>
<parameter4_2>{value4_2}</parameter4_2>
<parameter4_3>{value4_3}</parameter4_3>
</parameter4>
</parameters>
Any idea how is it possible to send complex type as web
service input from flex ?Hi,
I also have similar type of problem where I need to invoke a Web service with Complex input parameters.
I followed Susan's blog but I stuck at a point where methos getItem is created.
Can anyone tell me how to get that method for my requirement.
If possible can you guys share your solutions here.
Thanks in advance.
Maybe you are looking for
-
Time Capsule and Ethernet port
hey guys, I recently bought a time capsule, and stupidly enough, forgot that Time Capsule only has ethernet jacks- the problem is that my home only has a telephone modem jack. I was wondering if there were any Telephone to Ethernet jack converters? t
-
Virtual memory in a hyper-v failover cluster
Hi all, We have a window 2008 R2 hyper-V failover cluster working fine. It has two hosts, with 104 GB of memory on each of them.As I added new virtual instances I had been updating memory. The point is that as I do that page file for virtual memory h
-
Old woman , not that tech literate -Tried to update my iPad and it appears stuck on an emblem : circled musical note iTunes with picture of a plug in device below it HELP!!!!!!!!
-
Bought the original Creative Suite package 1n 2004, installed on my new apple G5. Upgraded in 2009 to CS4 and sometime installed on a 2nd computer. I'm sure I registered each product. I don't have the original disk's, but I have the serial number.
-
my iphone 3gs keep telling me te recover. if I connect to iTunes, is says it is in recovery mode. when it recovered and the iPhone restarts it is in recovery mode again. can't get out of this loop. I use windows 7