Problem with incomming call

hi every one
i just upgrade my ios7 i have one problem when some one call me automatic disconnect. when the same user call me again my ring will buzzzz so any idea please i m tried for that,
give me solution
thnaks

check your do not disturb settings (see if there is a moon icon displayed beside your battery icon) if so, go to settings>Do not disturb and turn it off.

Similar Messages

  • Problem with incoming call from pstn

    Hi,
    we have a 2610XM router with CCME 3.2 and 4 bri
    and we don't redirect incomming call from pstn on a internal IP Phone.
    which command for redirect call ?
    my isdn number (french) is 0156838050
    and when we call this number with my mobile (number 0685284832), look this debug
    debug isdn q931:
    Mar 22 12:53:46.350: ISDN BR1/0 Q931: Ux_DLRelInd: DL_REL_IND received from L2
    *Mar 22 12:53:46.378: ISDN BR1/0 Q931: RX <- SETUP pd = 8 callref = 0x73
    Bearer Capability i = 0x8090A3
    Standard = CCITT
    Transer Capability = Speech
    Transfer Mode = Circuit
    Transfer Rate = 64 kbit/s
    Channel ID i = 0x89
    Calling Party Number i = 0x2083, '685284832'
    Plan:Unknown, Type:National
    Called Party Number i = 0x81, '8050'
    Plan:ISDN, Type:Unknown
    Sending Complete
    *Mar 22 12:53:46.382: %ISDN-6-LAYER2UP: Layer 2 for Interface BR1/0, TEI 64 changed to up
    Router#
    *Mar 22 12:53:46.415: ISDN BR1/0 Q931: TX -> CALL_PROC pd = 8 callref = 0xF3
    Channel ID i = 0x89
    *Mar 22 12:53:46.439: ISDN BR1/0 Q931: TX -> DISCONNECT pd = 8 callref = 0xF3
    Cause i = 0x8081 - Unallocated/unassigned number
    *Mar 22 12:53:46.527: ISDN BR1/0 Q931: RX <- RELEASE_COMP pd = 8 callref = 0x73
    Cause i = 0x87E4 - Invalid information element contents
    Router#
    thanks for your help

    You have to either use a transfer pattern or a translation rule.
    http://www.cisco.com/en/US/products/sw/iosswrel/ps5012/products_feature_guide_chapter09186a00801812db.html

  • 2901 CME: Problem with incoming call via SIP Trunk

    Dear All,
    I have seen some others posted similar question regarding this but mine still doesn't work by using the reference solution.
    Mine is quite standard setup too -> CME setup on my 2901 router, analog phone attach to my FXS port my outgoing calls are working  fine via SIP but my incoming calls are not.  Caller only listen to engage tone and analog phone is not ringing at all. Attached with my config and trace log of ccsip messages. Kindly assist. Thank you so much.

    Hi Carlo,
    Here it is
    CME_2901#show sip-ua timers
    SIP UA Timer Values (millisecs unless noted)
    trying 500, expires 180000, connect 500, disconnect 500
    prack 500, rel1xx 500, notify 500, update 500
    refer 500, register 500, info 500, options 500, hold 2880 minutes
    , registrar-dns-cache 3600 seconds
    tcp/udp aging 5 minutes
    CME_2901#show sip-ua retry
    SIP UA Retry Values
    invite retry count = 6   response retry count = 6
    bye retry count    = 10  cancel retry count   = 10
    prack retry count  = 10  update retry count    = 6
    reliable 1xx count = 6   notify retry count   = 10
    refer retry count  = 10  register retry count = 6
    info retry count   = 6   subscribe retry count = 6
    options retry count = 6
    CME_2901#show sip-ua min-se
    SIP UA MIN-SE Value (seconds)
    Min-SE: 1800

  • Hi everyone!  I have a problem with incoming call on Iphone 4 32Gb.

    By an entering call phone blocks the bottom part of the touch screen and doesn't allow to me to take the call. It happens in 3 cases from 20. I have this problem on 4 different Iphone 4 32Gb.
    In the service center confirm my problem and say that phones aren't suitable to repair! It happens already with 4 under the account phone!
    Phone is synchronized with MS Exchange Server 2010 on technology Exchange ActiveSync. Mail, contacts, a calendar is synchronized. Function Push is included.
    At me also is Iphone 3Gs and Iphone 3G. With them such problems never arose!
    Can be at someone there was a similar case?

    hey buddy i sometimes have the same issue on the iphone 4 16gb.. it doesnt let me answer a call.. i just lock/sleep the iphone and unlock/wake the phone and that fixes it.. dont know y it happens but locking and unlocking help so..

  • Facing problem with incoming calls in iphone 5

    When a caller calls for second time within 10 seconds, the call is rejected saying that the user is not reachable.
    This is not the carrier problem for sure, as I tried using other phone and dint find the problem.
    Is this some known bug/feature???
    Any help is appreciated
    Thanks.

    I have not seen this type of behavior before. Let me get this correct, you say that if someone calls your iPhone 5 after just calling it within 10 seconds, they get a message stating "user is unreachable"?
    What troubleshooting have you done with the iPhone? Restart (power off/on) and reset (hold the sleep/wake and home buttons together until you see the Apple logo and then release) the phone restarts, are the first two steps.
    You say you tried this by calling another phone and it did not react like the iPhone?
    This is not something I would say is a bug/feature. It may be something with your particular device. Suggest trying the troubleshooting, otherwise, connection issues are generally resolved by the carrier. You might have them check to ensure your account is provisioned correctly.

  • I have viber installed on my iPhone. But whenever I receive a call from Viber, it would not ring. How do I fix this problem? How do I make it ring with incoming call?

    I have viber installed on my iPhone. But whenever I receive a call from Viber, it would not ring. How do I fix this problem? How do I make it ring with incoming call?

    Bring your phone into Apple for evaluation

  • IPhone 4S problem: Speaker only makes 'electronic noise' with incoming calls.. Has anyone else experienced this problem ?

    iPhone 4S problem: Speaker only makes 'electronic noise' with incoming calls.. Has anyone else experienced this problem ?

    I've not experienced this.  But I do appreciate your asking.
    Did you want help with your technical issue?  If so, why don't you ask.  Also state what troubleshooting steps you've taken.

  • I have problems with outgoing call no audio, only works with speaker. I bought my iphone on december 2011.

    I have problems with outgoing call no audio, only works with speaker. I bought my iphone on december 2011.

    Had the same problem, no audio on incoming or outgoing calls and only could hear the conversation of the call if I put on speaker. It seemed to start after I did a recent IOS update this past month. I tried restart, reset and restore of my iPhone but nothing changed. It appears not to be a software issue but a hardware problem. I got my phone this past summer so it was still under warranty and got it replaced.

  • SPA8000 Problem with outgoing calls from trunk

    Hi all,
    I have SPA8000 with the latest firmware 6.1.12.
    Tried the first time to configure the trunk groups. With incoming calls it caused no problems. But with the outgoing calls cannot solve the problem:
    When dialing, the SPA8000 try found number to itself.
    Port 8 in trunk group 1.
    10.120.0.67 - ip of SPA8000.
    172.17.1.1 - ip of PBX
    302 - number of trunk.
    444 - other number on PBX.
    INVITE sip:[email protected]:6060 SIP/2.0
    Via: SIP/2.0/UDP 10.120.0.67:5361;branch=z9hG4bK-e9bbff35
    From: <sip:[email protected]>;tag=1e668866b76f0b0do1
    To: <sip:[email protected]>
    Remote-Party-ID: <sip:[email protected]:6060>;screen=yes;party=calling
    Call-ID: [email protected]
    CSeq: 101 INVITE
    Max-Forwards: 70
    Contact: <sip:[email protected]:5361>
    Expires: 240
    User-Agent: Linksys/SPA8000-6.1.12
    Allow-Events: talk, hold, conference
    Content-Length: 202
    Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER
    Supported: x-sipura, replaces
    Content-Type: application/sdp
    v=0
    o=- 13756 13756 IN IP4 10.120.0.67
    s=-
    c=IN IP4 10.120.0.67
    t=0 0
    m=audio 19469 RTP/AVP 8 101
    a=rtpmap:8 PCMA/8000
    a=rtpmap:101 telephone-event/8000
    a=fmtp:101 0-15
    a=ptime:30
    a=sendrecv
    SIP/2.0 404 Not Found
    To: <sip:[email protected]>;tag=63d33124-0
    From: <sip:[email protected]>;tag=1e668866b76f0b0do1
    Call-ID: [email protected]
    CSeq: 101 INVITE
    Via: SIP/2.0/UDP 10.120.0.67:5361;branch=z9hG4bK-e9bbff35
    Server: Linksys/SPA8000-6.1.12
    Allow-Events: talk, hold, conference
    Content-Length: 0
    What is wrong? What must I do to outgoing call?
    Screenshots of configuration:

    Hey!
    Thank u soo much ana_bidi! It worked and my phone is back to life
    I even sent an email to Nokia and I got the weirdest reply ever! They were telling me to check if my sim was inserted correctly I was like whaaaat? And I did mention to them that I can receive calls and send/recieve SMS! I seriously don't know what made them suggest that thing
    Anyways thanks again for the solution!
    Have a great day! 
    Walid Shaaya

  • My iPhone 3Gs makes no sound with incoming calls although, it does vibrate? I have tried resetting with various options, but still no joy. Any ideas anybody please?

    My iPhone 3Gs makes no sound with incoming calls although, it does vibrate? I have tried resetting with various options, but still no joy. Any ideas anybody please?

    Fixed the problem. Got the Iphone 5

  • Problems with a call transaction

    Hi, I'm having some problems with a call transaction and I cannot understand why. I put A in the mode, and I am seeing the dynpros and I am pressing enter it works perfectly but when I use mode N it tells me that there is not information for one of the dynpros and it doesn't work. Does anybody know the problem and how to solve it??
    Thanks in advance

    Hi,
    First of all thank you very much for your time.
    I am using FB05 and the problem is in dynpro SAPLKACB 0002, and it says that batch input data doesn't exist. Here is the code, maybe you can see what is happening
    LOOP AT t_resumen WHERE belnr = t_batch-belnr AND
                                ( contador = 3 OR contador = 4 or CONTADOR = 5 ).
          READ TABLE t_clave WITH KEY belnr = t_resumen-belnr.
          d_clave = t_clave-bschl.
          i = i + 1.
          CASE i.
            WHEN 1.
              PERFORM bdc_dynpro  USING 'SAPMF05A'    '0700'.
              PERFORM bdc_field   USING 'BDC_OKCODE'  '/00'.
              PERFORM bdc_field   USING 'RF05A-NEWBS' t_resumen-bschl.
              PERFORM bdc_field   USING 'RF05A-NEWKO' t_resumen-hkont.
              PERFORM bdc_field   USING 'BDC_OKCODE'  '/00'.
              PERFORM bdc_dynpro  USING 'SAPMF05A'    '0300'.
              PERFORM bdc_field   USING 'BDC_OKCODE'  '/00'.
              j_wrbtr = t_resumen-wrbtr.
              REPLACE '.' WITH ',' INTO j_wrbtr.
              PERFORM bdc_field   USING 'BSEG-WRBTR' j_wrbtr.
              PERFORM bdc_dynpro  USING 'SAPLKACB'    '0002'.
              PERFORM bdc_field   USING 'BDC_OKCODE'  '/00'.
            WHEN t.
              PERFORM bdc_dynpro  USING 'SAPMF05A'    '0300'.
              PERFORM bdc_field   USING 'RF05A-NEWBS'  t_resumen-bschl.
              PERFORM bdc_field   USING 'RF05A-NEWKO'  t_resumen-hkont.
              PERFORM bdc_field   USING 'BDC_OKCODE'  '/00'.
              j_hkont = t_resumen-hkont.
              j_clave = t_resumen-bschl.
              PERFORM bdc_dynpro  USING 'SAPMF05A'    '0300'.
              PERFORM bdc_field   USING 'BDC_OKCODE'  '=BU'.
              j_wrbtr = t_resumen-wrbtr.
              REPLACE '.' WITH ',' INTO j_wrbtr.
              PERFORM bdc_field   USING 'BSEG-WRBTR' j_wrbtr.
              PERFORM bdc_dynpro  USING 'SAPLKACB'    '0002'.
              PERFORM bdc_field   USING 'BDC_OKCODE'  '/00'.
            WHEN OTHERS.
              PERFORM bdc_dynpro  USING 'SAPMF05A'    '0300'.
              PERFORM bdc_field   USING 'RF05A-NEWBS'  t_resumen-bschl.
              PERFORM bdc_field   USING 'RF05A-NEWKO'  t_resumen-hkont.
              PERFORM bdc_field   USING 'BDC_OKCODE'  '/00'.
              j_hkont = t_resumen-hkont.
              j_clave = t_resumen-bschl.
              PERFORM bdc_dynpro  USING 'SAPMF05A'    '0300'.
              PERFORM bdc_field   USING 'BDC_OKCODE'  '/00'.
              j_wrbtr = t_resumen-wrbtr.
              REPLACE '.' WITH ',' INTO j_wrbtr.
              PERFORM bdc_field   USING 'BSEG-WRBTR' j_wrbtr.
              PERFORM bdc_dynpro  USING 'SAPLKACB'    '0002'.
              PERFORM bdc_field   USING 'BDC_OKCODE'  '/00'.
          ENDCASE.
            READ TABLE t_porcentajes WITH KEY gjahr = t_resumen-zzbad
                                           zzbtd = t_resumen-zzbtd.
            IF j_hkont = t_porcentajes-cfacpr.
              PERFORM bdc_field   USING 'COBL-PRCTR' t_porcentajes-prctrfac.
              PERFORM bdc_field   USING 'COBL-ZZBTD' t_resumen-zzbtd.
              PERFORM bdc_field   USING 'COBL-ZZBAD' t_resumen-zzbad.
            ELSEIF t_resumen-hkont = t_porcentajes-cadmin.
             PERFORM bdc_field   USING 'COBL-KOSTL' '20801'.
            ELSEIF t_resumen-hkont = t_porcentajes-creca.
             PERFORM bdc_field   USING 'COBL-KOSTL' '20401'.
            ELSE.
              IF d_clave = 01 OR d_clave = 04 OR d_clave = 40 OR d_clave = 09.
                IF j_hkont >= 424001 AND j_hkont <= 424005.
                  PERFORM bdc_field   USING 'COBL-PRCTR' 'DUMMY'.
                ELSEIF j_hkont >= 424601 AND j_hkont <= 424605.
                  IF j_clave = 40.
                    PERFORM bdc_field   USING 'COBL-PRCTR' 'DUMMY'.
                  ENDIF.
                ENDIF.
              ELSEIF d_clave = 11 OR d_clave = 12 OR d_clave = 14 OR d_clave = 50.
                IF j_hkont >= 424001 AND j_hkont <= 424005.
                  PERFORM bdc_field   USING 'COBL-PRCTR' 'DUMMY'.
                ELSEIF j_hkont >= 424601 AND j_hkont <= 424605.
                  IF j_clave = 50.
                    PERFORM bdc_field   USING 'COBL-PRCTR' 'DUMMY'.
                  ENDIF.
                ENDIF.
              ENDIF.
    *Fin modificacion marzo 2007.----
              PERFORM bdc_field   USING 'COBL-ZZBTD' t_resumen-zzbtd.
              PERFORM bdc_field   USING 'COBL-ZZBAD' t_resumen-zzbad.
              PERFORM bdc_field   USING 'COBL-ZZBTT' t_resumen-zzbtt.
              PERFORM bdc_field   USING 'COBL-ZZBTU' t_resumen-zzbtu.
              PERFORM bdc_field   USING 'COBL-ZZBTS' t_resumen-zzbts.
              PERFORM bdc_field   USING 'COBL-ZZBAG' t_resumen-zzbag.
              PERFORM bdc_field   USING 'COBL-ZZBRE' t_resumen-zzbre.
              PERFORM bdc_field   USING 'COBL-ZZBC8' t_resumen-zzbc8.
              PERFORM bdc_field   USING 'COBL-ZZBC9' t_resumen-zzbc9.
            ENDIF.
        ENDLOOP.

  • HT4528 my ringer will not sound with incoming calls, please help

    my iphone 4s will not ring with incoming calls.  any ideas on how i can fix it?

    Try sliding the button that is above the volume up and down buttons to see if you have it muted.

  • Iphone 4 contact pictures do not display with incoming calls

    iphone 4 contact pictures do not display with incoming calls. they did before the ios 6 upgrade

    I am assuming that you have associated a picture with the contact in the information for the contact

  • HT201401 My iphone would not ring with incoming calls, despite ring tone was set up?

    My iphone would not ring with incoming call despite ring tone was set up using sound setting.  In the beginning, it did ring. After a while it stops working.  Any idea to make it work again?

    Is the silent switch on the side of the iphone on?

  • Contact names not showing with incoming calls!!!

    Hi all,
    I just got my E71-1 yesterday and upgraded from a very effiecient E61i....everything was going smooth until all of a sudden, contact names stopped appearing with incoming calls and SMS's.
    I went through the forums searching for a solutions and apparently alot of people experienced the same thing.....except in my case, I do not have any duplicate names or numbers!!!!
    Any ideas what could solve this???

    There is a fix for it but you won't like it. I have tried it a few times and it always works but it involves a lot of work. This is what you do.
    1. Make a backup of nothing else but your contacts only.
    2. Delete all your contacts from both phone and sim card.
    3. Start by entering the troublesome contacts from scratch making sure not to duplicate any numbers.
    4. Now get those people to ring you to make sure that your CLI is working fine.
    5. If it works then start entering the rest of the numbers, once again making sure there is no duplication whatsoever.
    6. If it doesn't work, just restore the backup you made of your contacts.
    I am fairly sure it will work, but just in case it doesn't you can always restore your backup and you are back to square one. 

Maybe you are looking for

  • HT1199 Newer version of iTunes will not open.  My music is gone.  How can I get the older version back?

    My "newer version" of itunes will not open.  How can I either get it to open or get the older version which worked fine?

  • Mac Book Pro slow with boot up since Mavericks upgrade

    Hi folks, my mac book pro is booting up very slow and running slow as well since I upgraded to Mavericks. Tried cleaning up, booting in safe mode, veryfying disk utility but nothing detected. Can someone check my ETRE or does anyone have another idea

  • Lenovo N200 no S-Video output

    Hello, on my N200 0769-EAG I don't get any S-Video output. I tried several cables... I think I installed all drivery correctly, but without any result. I also tried it on linux, but got no answer to TV. Does anyone has an idea? Helpless!!!!!

  • Itunes 9 is fugly

    The UI completely stinks: Too Glossy, white backgrounds in grid view, volume slider widget too small, Play progress bar too small (Often used to select a point in a song, podcast, video podcast, movie) iTunes Store almost useless: Again due to UI iss

  • Out of Sync when importing rendered sequence

    This is the first time I've had this happen and haven't been able to solve the problem yet and haven't found any solutions yet through searching. Using CS5.5, I'm building a show consisting of 7 or 8 already rendered sequences. All seem fine when put