Problem with inconsistent print dialogue box/Aperture and Elements?

I just purchased an Epson r1900. In Aperture everything is great! I can pull up icc profiles and the new print dialogue box features all the epson papers (glossy, Matte, Art, CD) in menus with submenus. But in Photoshop Elements 6, I get an old dialogue box which only shows the old Epson papers-Photo. Photo glossy, matte. There is no way, for instance, to choose Velvet art-and that is what I am using. It is driving me nuts. I have thrown out preferences, updated drivers, updated applications, fixed permissions...you name it. same thing in Apple Pages. Why am I not seeing the same dialogue box? Is this not OS controlled? The R1900 is always chosen. ( I do have an older printer as well, but definitely not selected.
any guidance appreciated!
thanks
Nancie

I have the same problem since I installed Snow Leopard. I have upgraded to the newest canon driver for my Canon Pixma IP5200 printer. Calibrating seems to no longer have a reliable impact on my prints. Also Aperture under SL will not save my preset information for media type, paper source or print quality in the print settings.
I am assuming this is a bug related to SL and hopefully will be addressed soon... It is very frustrating as I have waisted a lot of time ink and photo paper in the days since I have moved up to SL
When will we see a fix?

Similar Messages

I am running LR 4.4 on a iMac with OS X (Yosemite). Everything works in the develop module but when i get to the print module, clicl on print and the apple print dialogue box opens, and I click onn print there, the app closes. It has now happened about

I am running LR 4.4 on a iMac with OS X (Yosemite). Everything works in the develop module but when i get to the print module, clicl on print and the apple print dialogue box opens, and I click onn print there, the app closes. It has now happened about a dozen times. I have downloaded LR 4.4 from the internet but the problem continues.

Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Do they launch OK while in Safe Mode?

When i click on print menu in certain page, the pop page loaded then the print dialogue box appeared and immediately it close down all the pop up and print dialogue box without us to print it. What is the solution?

On that website (member only site), when i clicked on print menu on the site, it normally loaded the page and then the print dialogue box appear and immediately, it closed down all the pop up and print dialuge so that i cannot print it at all. It happened only after i upgrade Firefox to version 6.0.2, previous version it worked fine.

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
'''Note''': ''This will cause you to lose any Extensions and some Preferences.''
*Open websites will not be saved in Firefox versions lower than 25.
To Reset Firefox do the following:
'''For Firefox versions previous to 29.0:'''
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox"[[Image:Button reset]] button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
'''For Firefox 29.0 and above:'''
#Click the menu button [[Image:New Fx Menu]], click help [[Image:Help-29]] and select ''Troubleshooting Information''.Now, a new tab containing your troubleshooting information should open.
#At the top right corner of the page, you should see a button that says "Reset Firefox"[[Image:Button reset]]. Click on it.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

What is the problem with the printer dialogue?

I am running OS X 10.4.11 on a G5 Powermac w 1.5 GB RAM, and Photoshop CS3. For as long as I can remember, printing anything from Photoshop has produced the dialogue box: "The image is larger than the paper's printable area and some clipping could occur.", and I have to click out of it to proceed with the printing. It doesn't matter whether what I'm printing is, in fact, brushing the edge of the paper, or is, rather, a picture of an airmail stamp dead center, reduced to half-size. I get that dialogue every time. Is there any way to get rid of it? I can tell you that it has ABSOLUTELY NOTHING to do with the actual size of the image I am printing; it just adds one more step to the process.

The message is indeed generated by the printer driver.
Printers have default margins they have to observe. If the image exceeds their boundaries, you WILL get that message. Period. End of story.

I have started having problems with the png dialogue box in Photoshop cs6

When I go to save the image I am working on, the PNG Dialogue box is black , I mean that the radial and submit buttons show up but the rest is just black so i cannot see exactly what I am doing. I cannot work out how to fix this and would really like to avoid a total reinstall of my CS6 package.
This issue does not happen using the PSD or JPG save options either so i am baffled.
Kind Regards
William
PS- Does anyone know if it is still possible to talk directly to Adobe via thier live chat option as I could not find it when I wanted to inform them of this directly

I am using OS X Mountain Lion. I really dont want to have to reinstall anything. An OS Reinstall is really no less annoying than a Reinstall of the CS6 package. Sadly it looks like this may be the only way forward. Just hope I can do it without losing too much from the machine as it is my work machine.
Thanks for your help and for the link. I just wish Adobe was more directly contactable about issues that come up when using their products.
William

Reader opens in a highly magnified window, the toolbar is huge! Causes problems in the Print dialogue box, too. I can't figure out what I've done to make this happen, or how to undo it. Windows 8.1RT, MS Surface Pro3. Have re-installed too.

FIGURED IT OUT MYSELF!! It's when the Surface Pro is connected to a monitor, and the screen resolution has altered. Disconnecting the second screen puts everyting back to how it should be. Phew.

FIGURED IT OUT MYSELF!! It's when the Surface Pro is connected to a monitor, and the screen resolution has altered. Disconnecting the second screen puts everyting back to how it should be. Phew.

Problems With Clone Tool on Windows 7 and Elements 8

The clone tool is exhibiting strange behavior on a friends installation of Elements 8 on Windows 7.
Sometimes the clone tool refuses to clone, other times it will clone in over dark areas but not light areas. We tried resetting to factrory settings. This worked for a while be reverted to the strange behavior after a couple of days.
It's on the correct layer and the mode setting for the clone tool is Normal and when it works in a darker area it will make it even darker but will not darken a very light (white?) area.
Anyone know what's happening?

I guess you have some blending mode other than 'Normal' selected.Click on the top-left corner of tool option bar and choose "Reset Tool".

Xerox 8560N (2.0.13): Print Dialogue Box: Slow/Sticking

Is anyone having any issues with the print dialogue box when printing to a Xerox 8560 since updated to the Xerox printer driver, 2.0.13?
Specifically: In any application, I open the print dialogue box and if I attempt to select any pull down option it hangs for about a minute or so and then lets me make the choice(s). If I simply open the print box and attempt to press "print" I get the same problem. The machine itself is printing fine.
Have attempted many of the usual fixes like re-downloaded the driver from Xerox, resetting printers, adding/removing printer (re-setting it up), permissions repair, &c.
It's not the end of the world, but it is annoying.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Printing mulitple tabs without getting Page Setup & Print dialogue boxes

I am using Forms 6.0.5.2. I have a form with 7 tabs and I need to be able to have a Print All button that prints a screen image of each tab. I have tried programming a trigger that executes a GO_BLOCK('a'); print; GO_BLOCK('b'); print; etc etc. While this will work, it is not user friendly as it prompts the user with the "Print" dialogue box (to select which printer to print to) and then the "Print Capture beginning. Don't move or occlude window until done" diaglogue box every time the print command is executed. Is anyone aware of a way to have these dialogue boxes come up only the first time the print command is issued and to be suppressed afterwards?

It's relatively easy to setup a series of questions and capture the results via display dialog, for example:
set bleedVal to text returned of (display dialog "Enter the required bleed:" default answer "0" buttons {"OK"} default button 1)
set bleed to bleedVal
You can even do fancy things like:
set orientationVal to button returned of (display dialog "Enter the required bleed:" buttons {"Landscape", "Portrait"} default button "Portrait")
set orientation to orientationVal
or:
set paperSize to (choose from list {"A3", "A4", "B3", "B4"} with prompt "choose a paper size" default items "A3") as text
set paper size to paperSize
Note that you may want to perform some input validation on the value entered to make sure that users don't enter inappropriate values such as "0" for the enlargement/reduction ratio, or "none" for bleed values, etc.

How can I move or resize the print dialogue box to fit within my screen?

Right now the print dialogue box sits below the menu bar and extends below the screen. I have tried to move it up or resize it, but it doesn't budge. I can't see the buttons at the bottom. I know one is "cancel" and one is "print" but there's a third - is it "save"?
I'm using Windows 7 on a Toshiba laptop with Creative 6 screen resolution is 1280 x 720
Any help would be appreciated

This is obviously a bug with Photoshop Elements 12.
In my Photoshop Elements 10 the printer dialogue box scales to fit the screen every time.
In Photoshop Elements 12, even moving the task bar away (you can simply drag it up the right hand side of your screen with the mouse) you can't see the print button as its still off the bottom of the screen.
My work around is to hold shift+alt+cntl and click on my Ps icon - Click compatibility - Scroll down to settings - click run in 640 x 480 screen resolution. It then does horrible things to your screen res, but hey presto the printer dialogue box is minimised and you can print your picture. As with your Toshiba, even with the printer dialogue box fully exposed there are no chevrons in the bottom right hand corner to minimise the printer dialogue window and the arrow buttons simply start trying to change the settings in the printer set up. The dialogue box is still nailed to the top of the screen with no title bar to right click on.
How do I escalate this to report it as a bug to Adobe?

Quality and Media options don't appear in Print Dialogue Box

I recently upgraded my OS and now when I try to print on either my Lexmark Z65 or my Epson R300 (both USB connections), I don't see the "Quality & Media" option in the print dialogue box.
I need these settings to appear so I can choose Glossy Photo Paper. This is the only setting that will give me the saturated prints that I need for my projects.
I have tried:
- reinstalling the latest drivers for each printer
- deleting and then re-adding the Printers
- restarting
I've been reading that others are having similar problems when they upgraded to Tiger, but none of the posted solutions seem to work for me. Any ideas?
Thanks,
Jen

Options such as Quality & Media are known as PDEs (Print Dialog Extensions) and they are added to the standard print dialog by the driver installer. For the new Intel Mac's, to get these extensions to appear (or appear without a line through them) you need to have a driver that is written in Universal Binary.
You mentioned that you have the latest drivers. Check back to the web site to see if they mention them being Universal Binary versions. If they are Universal, then the previous drivers that were PPC may be interferring with the UB version. Try opening the Printer Setup Utility, click on the title menu and select Reset Printing System. Then close the Printer Setup Utility and open Finder. Navigate to /Library/Printers/ and delete the contents of the Epson and Lexmark folders. Empty the Trash, restart the Mac and try adding the new drivers again.
If there aren't any Universal Binary versions available, then you can set most applications you are printing from to open using Rosetta. Before opening the application, find its location in the Finder view and go a Get Info on the icon. In the Info window, if there is a setting 'Open using Rosetta', then enable it and open the application. Now you should have the option.

Canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors

canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors
i have prfiled the mac and printer wiht colormunki and uplodated the profile sucessfully
i set the printer to correct icc profile
print out comes out same with glazed colors and missing tones/colors
however when i use the same printer on windows and with light room, following same icc profile, colormunki calibrated profile, the print our are excellent.
i have also tried using printer manage profile using the Mac and Aperture and get same poor prints
can you please assist and thanks

I've a Pro9000 and also use Colormunki successfully.
When I use Colormunki, I calibrate both of my monitors and the printer/paper combination. Colormunki saves the generated profiles to the correct places -- I don't load or change any profiles after that as that would mess-up what the Colormunki had just done for me, and this would likely mess-up the prints.
Though I double-check the settings in the print dialogue, the choice for the printer handling things is already grayed-out. Colorsync handles it all just fine.

Print dialogue box not opening with HDR image

I created an HDR image using HDR Efex Pro 2 a month ago and printed it. It is saved as a psd file. I went to print it yesterday and the print dialogue box won't open. I've tried alt tab to check the box isn't open and hidden. I've re-created the image and the result still won't open. No other images are causing this problem. It's probably something really simple and hopefully someone out there can shed light for me. Thanks

Thanks for that - I wondered about the 32 bit/channel but am bemused as to how I got the first print a month ago!! Now toned which and in 16 bit and print dialogue box opened.
Thanks guys

When I start up the computer, the dialogue box opens and saying that the procedure entry point splite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I tried to fix this problem by redownloading itunes, but the problem still

When I start up the computer, the dialogue box opens and saying that the procedure entry point splite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I tried to fix this problem by redownloading itunes, but the problem still persists. How can I fix it? thank you.

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck

When I start up the computer, the dialogue box opens and saying that the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I redownload itunes, but the problem still persists. How can I fix this?

When I start up the computer, the dialogue box opens and saying that the procedure entry point splite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I tried to fix this problem by redownloading itunes, but the problem still persists. How can I fix it? thank you.

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck

Problem with inconsistent print dialogue box/Aperture and Elements?

Similar Messages

Maybe you are looking for