Problem with Infinity - Any help / advice apprecia...

Hi all,
Have had Infinity for around a month now and it was absolutely mega until about a week ago when it completely stopped working and the DSL light began flashing on the Openreach Modem. I called support and they arranged for an engineer to call two days later. After testing my installation he decided that the Openreach Modem was faulty and so replaced it like for like.
My problem is that before it broke I was averaging 37 Mbps and since it was repaired the best that I have been able to get is 27 Mbps, a drop of 10 Mbps. Why has this happened and is there anything I can do to restore my original speed? Any advice or help offered will be greatly appreciated!
Thanks.

Similar Messages

Why has my ipad mini stopped connecting with my iPhone 4S? I used to use it to download books, or transfer emails to my ipad mini. It was fine 3 days ago, now I get a message saying " cannot join with iPhone" Any help greatly appreciated.

Why has my ipad mini stopped connecting with my iPhone 4S? I used to use it to download books, or transfer emails to my ipad mini. It was fine 3 days ago, now I get a message saying " cannot join with iPhone" Any help greatly appreciated.

You can try resetting your iPad and iPhone by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
Try again to see if the problem persists.

Ipod Nano Problem sync/playing - Any help greatly appreciated

I've looked through the forum for others with problems but none seem to match mine. I am here on behalf of my girlfriend who has had a nano for christmas and up to now been using it fine, but this morning she tried connecting it to the computer and when she plugged the cable in it gave the "synchronising" message with the rotating arrows but then after a few seconds just gives the "safe to disconnect" message and goes back to the main screen, without even appearing on itunes. on top of that, the ipod will not play any songs, when you push play the icon changes in the corner to say its playing but the time bar stays in the same position and no music can be heard.
I have tried resetting the ipod, going into disk mode, using diagnostics mode. restarting the computer, using another usb port, reinstalling itunes. nothing is shifting it. cant format it or restore as it doesnt get to connect to itunes in the first place. any help would be amazing as i dont want to have to send it back to apple. thankyou.

I've looked through the forum for others with problems but none seem to match mine. I am here on behalf of my girlfriend who has had a nano for christmas and up to now been using it fine, but this morning she tried connecting it to the computer and when she plugged the cable in it gave the "synchronising" message with the rotating arrows but then after a few seconds just gives the "safe to disconnect" message and goes back to the main screen, without even appearing on itunes. on top of that, the ipod will not play any songs, when you push play the icon changes in the corner to say its playing but the time bar stays in the same position and no music can be heard.
I have tried resetting the ipod, going into disk mode, using diagnostics mode. restarting the computer, using another usb port, reinstalling itunes. nothing is shifting it. cant format it or restore as it doesnt get to connect to itunes in the first place. any help would be amazing as i dont want to have to send it back to apple. thankyou.

Problem after problem with my Z10 - Help/Advice needed

Hello all, last night around 11pm I checked for any new software updates for my Z10 and one came up, I click it and it downloaded fine, installed fine and asked for a reset, I clicked and off it went. Seems it took a while to load up after that, eventually when it did I had many things missing such as contacts, all the apps had moved around and some diappeared.
After looking around the internet I decided to do a security wipe and start fresh, so went into settings etc and entered "blackberry" to start (I removed my SD card before this). Phone went off and came back with a paper shredder icon and a blue spinning icon underneath, great?.. well no because after 2 and a half hours it's still on the same thing. I looked on the internet and it's suppose to take 15mins? also isn't it suppose to say "security wipe in progress" ?
Very confused on what to do now, any help would be appreciated greatly!
Sean

Try to format the player. Use Fat, Fat6, or Fat32 when formatting the player NTFS is not supported.

Having Problem With Syncing Ipod Help Really Appreciated

hello im trying to sync my ipod to my itunes but it says "cant sync because of corrupted files" and i have no idea how to fix the problem. anyone if you can help me it would be greatly appreciated
thank you
Brian

First off, don't be so impatient.
So the iPod shows up in iTunes ok? If so, can you do a restore on it?
Patrick

File IO basics more than 1 problem with streams any help?

Have console program that i've built up in steps from reading args from the command line and displaying the text to now wanting to learn to read and write to a disk file.
i know i have a number of errors but believe it's down to something i am not understanding with the use of datastreams.
a snippit of code is below.
if (args.length > 0)
            // Read what the use has entered and keep for later use
        for (int i=0; i < args.length; i++)
          text = text + args;
try
//path is define further up as c:\my projects\
System.out.print (path);
//create a file object to point to the file the user has given for reading to
// the file and another to read the file back in
File fileIn = new File (path,text);
// File fileOut = new File (path,text);
// Not sure if this is required!!
fileIn.createNewFile();
// thefileOut.createNewFile();
//Thought this would be the right way of of creating the stream
// DataOutputStream thefileIn = new DataOutputStream(new BufferedOutputStream(new FileOutputStream(fileIn)));
// DataOutputStream thefileOut = new DataOutputStream(new BufferedOutputStream(new FileOutputStream(fileOut)));
//errors on exists and delete methods
if (fileIn.exists())
fileIn.Delete();
catch(IOException e)
{            // also errors in the getmessage
System.out.print("Error occured!"+ fileIn.getmessage());
the errors i am getting are to do with the DELETE method
The Getmessage method
Exits method
i have others but if i can get help with these then i might be able to fix the others.
thanks

complete program code below :)
import java.io.*;
public class mysimpleio
String thefilename = "";
// String ToFile(String thefilename);
// String FromFile(String thefilename);
public static void main(String[] args)
    String text = "";
    String path = "e:\\my_project\\crm\\";
    if (args.length == 0)
        System.out.println("No file name, Exiting program!");
    if (args.length > 0)
        for (int i=0; i < args.length; i++)
          text = text + args;
try
System.out.print (path);
File fileIn = new File (path,text);
// File fileOut = new File (path,text);
fileIn.createNewFile();
// thefileOut.createNewFile();
// DataOutputStream thefileIn = new DataOutputStream(new
BufferedOutputStream(new FileOutputStream(fileIn)));
// DataOutputStream thefileOut = new DataOutputStream(new
BufferedOutputStream(new FileOutputStream(fileOut)));
if (fileIn.exists())
fileIn.delete();
catch(IOException e)
System.out.print("Error occured!"+ fileIn.getmessage());
ToFile(text);
System.out.print("\n okay so you entered "+ text);
if (!fileIn.exists())
System.out.println("Sorry no file found matching " + text);
else
if (fileIn.exists())
FromFile(text);
// put data to a Disk File
static void ToFile(String thefilename)
// thefileOut.writeUTF(path);
System.out.println("Data would be written to file Now! "
+thefilename);
//Read data From a Disk File
static void FromFile(String thefilename)
fileIn.readUTF(path);
System.out.println(" Data would be Read From file Now! "
+thefilename);
Errors are....
can not resolve symbol
E:\my_project\crm>javac mysimpleio.java
mysimpleio.java:43: cannot resolve symbol
symbol : variable fileIn
location: class mysimpleio
System.out.print("Error occured!"+ fileIn.getmessage());
^
mysimpleio.java:49: cannot resolve symbol
symbol : variable fileIn
location: class mysimpleio
if (!fileIn.exists())
^
mysimpleio.java:53: cannot resolve symbol
symbol : variable fileIn
location: class mysimpleio
if (fileIn.exists())
^
mysimpleio.java:70: cannot resolve symbol
symbol : variable path
location: class mysimpleio
fileIn.readUTF(path);
^
mysimpleio.java:70: cannot resolve symbol
symbol : variable fileIn
location: class mysimpleio
fileIn.readUTF(path);
^
5 errors
E:\my_project\crm>

I had a problem with the hard disk on a 2010 macbook pro. Replaced the hard disk with an Hitachi 1TB and when I tried to erase and format It fails with input/output error. Any help much appreciated!

I had a problem with the hard disk on a 13" 2010 macbook pro. Replaced the hard disk with an Hitachi 1TB disk but when I tried to erase and format, it fails with input/output error and at other times saying unable to allocate memory. Any help much appreciated!

Zap the PRAM and Reset the SMC, then try again.

HT201412 Have a problem with iPad2, apple logo appears but iPad won't boot up, then logo disappears & iPad dies - probably caused due to insufficient hard disk space (too many apps) - any help greatly appreciated

I have a problem with iPad2, apple logo appears but iPad won't boot up, then logo disappears & iPad dies - probably caused due to insufficient hard disk space (foolishly loaded up too many apps) - any help/advice greatly appreciated

What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

Hi, back ups to my TC suddenly won't work saying there's a problem with network username/password. Any help greatly appreciated!

I've deselected the disc, reselected it & re-entered the password 3 times now with no luck.
Any help greatly appreciated!

It sounds like you have much more issues than simply the TC..
I can suggest or have suggested the workaround to the TC problem.
Did you try it??
What happened if you did?
Did you simply try the standard old reboot the TC.. ie yank out the power cord. count to 10.. plug in the power cord.
That magically fixes lots of network issues.
Mavericks has some major issues.. do you upgrade install.
Let me strongly recommend a clean install.. if you haven't done it. Your issues with safari look like a corrupted install to me.. but I am not an eggs spurt in OS issues.. by any long stretch of the imagination.. post the issue over in the Mavericks area.
But as an old computer support man.. (old should be emphasised) upgrade installation are anethma.. I have never seen them work 100% and that includes with Mac. Of course you cannot expect windows to work.. but things go wrong in every OS.. no matter how wonderful.
Make sure you have a good TM backup .. clean install and migrate your documents back.. maybe reinstall software from scratch. Not easy but the only way.

Trying to download CS5 extended on a new laptop with no disk drive. Do not have my old activation serial number to do it online...any help much appreciated.

trying to download CS5 extended on a new laptop with no disk drive. Do not have my old activation serial number to do it online...any help much appreciated.

you need your serial number to activate.
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

I've just changed my router and whilst my laptops sync ok, my G4 tower which connects via an airport express doesn't connect to the internet. I think it's something to do with the IP or DHCP settings but have had no success, any help much appreciated.

I've just changed my router and whilst my laptops sync ok, my G4 tower which connects via an airport express doesn't connect to the internet. I think it's something to do with the IP or DHCP settings but have had no success, any help much appreciated.

Hi Jake,
Is it connecting to the Router or Modem?
Is the new Router using maybe WPA2 encryption? If so, G4s can only do WPA or less.
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
old... http://docs.info.apple.com/article.html?artnum=106653
Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
The Interface that connects to the Internet, needs to be drug to the top of System Preferences>Network>Show:>Network Port Configurations and checked ON.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
Then... Try putting these numbers in Network>Airport>TCP/IP>DNS Servers, for the Interface you connect with...
208.67.222.222
208.67.220.220
Then Apply.
Also, turn off IPv6:
System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6

I'm trying to remove pages from my menu by exluded them via the page properties. When I do that Muse crashes with the following error, "menuItemBox U32584 has no associates page!" Any help is appreciated.

I'm trying to remove pages from my menu by excluding them via the page properties. When I do that Muse crashes and displays the following error, "Adobe Muse CC has encountered an error and wil not exit...." "menuItemBox U32584 has no associates page!"
Any help is appreciated.
Thanks,
Carole

One or more menu widgets within your site have become out-of-sync with the structure of your site in Plan view. If you send us the file we can repair and return it. Or you could delete and recreate the menu widgets.
Please send us the .muse file at [email protected] along with a link to this thread. If the file is larger than 20Mb you can use a service like Adobe SendNow, Dropbox, WeTransfer, etc. (If you use a service, please include your return e-mail address in the body of the message, since not all services include it in the sharing invite they send.)
Thanks.

Problem: ipod server could not be contacted, i went to control panel, lan settings, ck'd auto detect and went back to i-tune to update and got the same error message, any help is appreciated

Error message: Ipod software update server could not be contacted. I went to control panel, lan settings, clk'd auto detect settings and ok. When i went back to i tunes and clk's update, i got the same error. Any help is appreciated.
Rand221

See the previous posts on the right side of this page under the heading "More Like This" that have you same error message.

SB Xtreme Audio Notebook optical out problem with Home TheaterSystem-HELP!

JSB Xtreme Audio Notebook optical out problem with Home TheaterSystem-HELP!, I have this sound card connected?(optical OUT) ?to my home?theater system's digital IN ?through the recommended /8in. optical miniplug-to-optical SPDIF cable. Theater system is set correctly to Digital-In mode. I have no sound!
The cable is a Velocity Toslink-to-Optical Mini Plug digital cable. I don't see any settings in the Creative Console Launcher. The notebook is a Dell XPS M730 (Vista 32).
I have a PS3, DirecTV, and the SB Xtreme Audio Notebook cable on a hub switch that connects to the system's?one Optical IN. The PS3 and DirecTV sound perfect!
The sound card works fine with standard PC speakers. I'm at a loss as?to what to try next. I set this whole system up myself, so I'm pretty good at working out the kinks, except this one!
Karen

OK. I just went to Control Panel - Sound - Playback - Digital Output Device (SB Xtreme Audio Notebook) - Properties - Advanced. I experimented with different sample rates and bit depths. Clicked the test button and lo and behold - sound from the HTS! I've tried iTunes, PowerDVD (configured to digital output) and YouTube - no sound! Am I missing something really obvious?
HA! Just backed out to Playback and selected Digital Output Device (SPDIF) and set as Default. Sound is emunating from HTS! Well, that mystery is solved! Who knew.
Thanks anyway! Any comments or advice will still be appreciated.

Mac doesn't recognize external HD anymore. Any help is appreciated.

Hi Everyone. Suddenly, my MAC mini doesn't recognize my external hard drive any more. It was fine for years and today it's not "there".
I tried connecting with different fire wire cables and still, same problem.
I also tried connecting the external HD to my iMac and still, doesn't recognize it.
I tried restarting many times, still, same problem.
I tried disconnecting all cables and power cords, reconnecting them and powering on, and that didn't resolve it.
I have been searching the web all morning for ideas and can't seem to find a solution.
The external HD is a Maxtor III 300 GB. Older one but was big enough for my needs.
I was reading that sometimes doing a software update might cause an issue with external HDs. I just don't know how to resolve that if it is.
This hard drive is formatted for the Mac.
According to Maxtor I do not need to update my drivers. I was thinking that maybe one got lost.
Any help is appreciated. Thanks in advance!
Christine

If only the mini couldn't read it, that would lead down one path. However, if both the mini and the iMac can't read it, that sort of points to an issue with the drive. Do you hear the drive power up? If you have an external power supply have you tried that or do you use that with it?
It's possible that the hard drive is in fine condition, and it's the case electronics that are acting up. You should be able to pull the hard drive out of the Maxtor case and put it into another external case, to read the hard drive, assuming the drive itself is OK.

Problem with Infinity - Any help / advice apprecia...

Similar Messages

Maybe you are looking for