Problem with inserting title sheet in sequence

Hi everyone,
I've recently started using Premiere Pro CS5 so I've only mastered the basics, but up untill now everything went well.
My problem is as follows:
To add a title in a sequence, I could drag it from the Project Menu in my sequence or click on the right mouse button and select the option 'insert' or 'overlay'.
Currently however, the right mouse menu does not display these options, i.e. they're grey and unclickable. Moreover, when I drag a title to the sequence, it automatically 'overlays' instead of 'inserting'.
In order to insert a title in my sequence, I now have to open in in te Source Monitor (that option is clickable), choose 'insert' and drag the title in the sequence. It's quite laborious and frustrating, since I have a feeling it's just a matter of changing my settings...
Could you please help me out on this one?
Thanks!

When editing from the Project Panel via right-click or keyboard shortcut, you must have tracks targeted in your sequence. Here's a comparison:
Basically, you have to tell Premiere where you want the clip to be inserted or overlaid, and that's accomplished with the track selectors being on or off.
Moreover, when I drag a title to the sequence, it automatically 'overlays' instead of 'inserting'.
Hold down the Control/Command key to do an insert edit; you'll see the mouse pointer change to indicate the different type of edit.

Similar Messages

Problem with Protected Excel sheets through OLE

Hi Friends
We are facing the problem with the protected sheets in excel, when we are accessing worksheets via SAP.
We can insert the values in the protected sheet and we can do other manupalations, but when we are trying to do the autofit for the protected sheet via SAP, then its throwing an error while making it as Visible in SAP ECC 6.0.
Though it is valid, because even when we do in the excel itself, it wont allow the user to shrink the columns, but this one is possible in ECC 5.0 and we can make excel is visible on the screen.
I would like to know is this SAP Version problem or anything else apart from this? and I would like to know is there anyway to unprotect and protect the sheet through ABAP program with out a password. Now my clients wants the autofit though its protected.
Please give me any suggestions.
Thanks
Praveen

its bug with ECC 5.0. If we want to make it auto fit we need to unprotect, then auto fit.
Later we can protect again

Problems with INSERT syntax ?

Dear programmers,
I am have a problem with INSERT Syntax,
I have a table with 11 fields out of which one is auto_increment field(id), Now my problem is, Do i need to specifiy autoincrement field in INSERT statement. I dont thinks ?
My Insert statement is as follows ,
int result = st.executeUpdate("insert into tablename"
+"(name, user_group, lage, preis, anmerkung, exp_uri, timestamp, nummer)"
+"values +Objekt+"','"+Kategoriekey+"','"+Lage+"','"+Preis+"','"+Anmerkung+"','"+Dateiname+"','"+date.getTime()+"','"+ObjektID+"')");
thanks in advance
bye

The answer to your question is maybe. Each database handles autoincrements differently. What database are you using?
I also noticed that you are doing an insert using the standard Statement. You should look into using PreparedStatements for performance reasons and issues such as single quotes from within a string.
Matt

Problem with "Insert" and "Overwrite Sequence Content"

I'm working with XDCAM footage. I like to take all the individual clips recorded on the XDCAM disc, and after getting them into FCP, taking them and putting them all in a sequence in FCP, then using that sequence as the source in the Viewer. This allows for quick scanning of all the clips, much as is it were a digitized tape.
I recently found the "Insert Sequence Content" and "Overwrite Sequence Content" commands in FCP, and like them in that they actually put the individual clips into my project timeline, and not just the combined sequence (which looks more or less like a nest when dropped into my project sequence).
Here's the problem: When I put IN and OUT points in the timeline, and "Insert or Overwrite Sequence Content" using the sequence containing all the clips, the video tends to be contained to between the IN and OUT points I set in the TIMELINE, but the audio tracks tend to expand past the OUT point I set in the TIMELINE, and I can't figure out why, or how to get around this.
Any assistance would be appreciated.

If you're inserting or overwriting, you're basically pasting the content that you've chosen. I wouldn't think the out point would be recognized, or even wanted. If you copied 5 minutes of clips and inserted it into a sequence with a 4 minute in/out point duration, do you want to only have the first 4 minutes inserted into the sequence? If you only place an in point, it will insert all the clips, starting at that point, and it will take up as much time as the clip content's duration.
Am I missing something here?

Locking problem w/ INSERT..SELECT using sequences.

I have a scenario where an INSERT..SELECT statement that includes incrementing a sequence value is causing Exclusive DX locks on the SYS.I_SEQ1 index and the SYS.RESOURCE_COST$ table. When the statement is executing from within a COM+ application using distributed transactions the behavior is exhibited. If the same statement is executed from SQLPlus these locks are not acquired. The statement is similar to:
insert into table1 ( pkey, column2)
select pkey_seq.nextval, value2
from table2;
Anyone have any idea why this behavior is seen in a distributed transaction?
Thanks,
Sam

Hi Ari,
Thanks for the tip. I noticed that approach in earlier posts, but these people were using Oracle 9 and below. The feature I am trying to use is a JDBC 3.0 feature and I believe was introduced in recent JDBC drivers (10.1.0).
I suspect the driver inserts a RETURNING clause anyway. I got this impression from this post (mid-way down the first paragraph):
http://archives.postgresql.org/pgsql-jdbc/2003-05/msg00040.php
Although this post is about to postgresql's JDBC driver, I guess the Oracle driver would probably do a similar thing? If so, then the problem I am having could be that the final SQL (my SQL + inserted RETURNING clause) is invalid.
Anyway, I don't have a problem with this anymore because I changed my design (for the better) and I don't have to do the insert select statement.
Regards,
Simon.

Problems with inserting elements into vectors

Hi,
I have a problem with the setElementAt() method for vectors.
I want to initialise a vector that is same size as a previous vector declared in my program and insert float 0.0 in all the positions.
The code below is a for loop to do just this where count is the size of the previous vector.
for(int i=0;i<count; i++)
vLargest.setElementAt(zero,i);
}i have declared zero as a float
float zero = 0.0f;
the error that i'm getting is that it that the vector cannot be applied to a float.
Can anybody tell me what i'm doing wrong?
Thanks

Yes you need to store Objects in your Vector not primitives.
float is not an Object it is a primitive. But Float is an object.

A problem with inserting into DB hebrew strings

Hi,
I am working with a 8.1.7 DB version, and use thin driver.
I have my DB Charest configured to iso 8859P8 (which is visual Hebrew)
I have no problem in making a connection and retrieving strings, using SELECT * FROM ..
and then use the ResultSet.getString(String columnName) method .
I also have no problem in inserting the Hebrew characters , and retrieving them back ( I represent them in a servlet ),
The only problem I do have, is when I try to insert into DB a row in the following manner
INSERT into table_name values( Hebrew_String_value1, Hebrew_String_value2, Hebrew_String_value3, Hebrew_String_value4)
the insertion works fine , but somehow the insertion misplaces the strings order and actually the insertion is in opposite order :
Hebrew_String_value4, Hebrew_String_value3, Hebrew_String_value2, Hebrew_String_value1.
If I use the same insert with English Strings , there is no problem.
does any one have the solution how I insert the strings in the right order ?
one solution I have is to insert only one column and then update the table for each column , but then , instead of one execute() action , I have to make ,
1 execute() + 9 executeUpdate() for a 10 column table

Can you try specify the column order in your INSERT statement, i.e.
INSERT INTO mytable( column1_name,
                     column2_name,
                     column3_name,
                     column4_name )
             VALUES( column1_string,
                     column2_string,
                     column3_string,
                     column4_string)My wild guess, though I can't understand why at the moment, is that there may be a problem because Hebrew is read from right to left, that may be causing a problem.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Problem with Nokia Camera and Smart Sequence

Hi,
I'm having a problem with Nokia Camera and the Smart Sequence mode.
Basically, if you take a picture using nokia camera, and view it in your camera roll, it usually says, underneath the pic "open in nokia camera".
Well, if I take a pic using the Smart Sequence mode, it just doesn't say "open in nokia camera" so, to use the functions of smart sequence (best shot, motion focus, etc), I have to open nokia camera, go to settings and tap the "Find photos and videos shot with nokia camera" option.
Does anyone has the same problem? Anybody solved it?
I already tried reinstalling nokia camera, but that didn't help.
I'm running Nokia Black on my 925.
Thanks everyone!

Hi,
I had the same problem with my 1020. It did get fixed with the last update to Nokia camera.
However, IIRC, it didn't just happen right away. When browsing the camera roll I'm pretty sure that the "open with Nokia camera" text wasn't there.
Slightly disappointed I opened the (Nokia) camera anyway and was going to test the smart sequence again. I noticed the only precious pic I'd taken using this actually appeared top left of the screen.
I opened it and I had all the smart sequence editing options again - that we're missing previous. Made a new picture and saved it.
Now when in camera roll the text shows below the image and all is good.
This probably doesn't help much except that it didn't seem to fix automatically.
I work @Nokia so I can ask around a bit to see if this is a known / common issue (not that I know any developers)

I'm having a problem with inserting a photo gallery created with Bridge

I sure could use some help.
Adobe Bridge - Why do I have a white bar on my page?
I am using windows vista, Dreamweaver cs4 and Adobe bridge to insert a photo gallery.
I am using an I-frame to embed a photo gallery that was created with Adobe Bridge CS4. Adobe Bridge instructed me to make the i-frame height = 75% of the width. The code is <iframe src="PhotoAlbum/index.html" width="900" height="675" frameborder="0"></iframe>
my css places the album in #photoalbum.
#photoAlbum contains the i-frame with the following properties:
#photoAlbum {
margin-top: 20px;
margin-right: auto;
margin-bottom: 0px;
margin-left: auto;
width: 900px;
text-align: center;
padding-top: 20px;
padding-bottom: 20px;
border-top-width: 2px;
border-top-style: groove;
border-top-color: #333;
I tried changing the width to 960, 900, 850 etc with no success.
I have tried making the background of #photoAlbum black with no success.
The link to the photo album is http://www.gigharborrealestate.com/smith/PhotoAlbum/index.html and shows no white bar.
The site that I am having problems with is http://www.gigharborrealestate.com/smith On the right side of the Point Richmond Photo Gallery is a white vertical bar. If you go to /PhotoAlbum/index.html there is no white bar.
Why does this bar show up when /PhotoAlbum/index.html is put into an I-frame? How can I get rid of the vertical bar?

insert the following into your code,
scrolling="no"
it should look like this
<div id="gallery"><iframe src="IMAGES/Adobe Web Gallery/index.html" scrolling="no" width="730" height="555" frameborder="0" name="web_gallery" style="background-color: #D8D9B4"></iframe></div>
hope it helps, good luck

Mail problem with long titles using utl_smtp / mixed content / attachements

Hello,
I'm having a problem with sending emails. The title as well as the body needs to be able to contain accented letters (é ç ...).
For the body i got it working.
And the title works fine too, untill the encoding passes a certain length, then goes all wrong and my mail header starts showing up in the mail body.
Could anyone help me in finding a solution?
Thanks in advance
Below my code:
DECLARE
   v_From       VARCHAR2(80) := 'test@localhost';
   v_Recipient VARCHAR2(80) := 'test@localhost';
   v_Cc         VARCHAR2(80);
-- long subject causing problems
   v_Subject    VARCHAR2(32000) := '123456789111111111111111111111118888888888888111111111111111991234567891111111111111111111111188888888888881111111111111119912345678911111111111111111111111888888888888811111111111111199';
   v_body       VARCHAR2(32000) := '<a href="#">tester</a><br><br>en nog wat éékes en ççkes';
   v_Mail_Host VARCHAR2(30) := 'localhost';
   v_Mail_Conn utl_smtp.Connection;
   crlf         VARCHAR2(2) := chr(13)||chr(10);
BEGIN
v_Mail_Conn := utl_smtp.Open_Connection(v_Mail_Host, 25);
utl_smtp.Helo(v_Mail_Conn, v_Mail_Host);
utl_smtp.Mail(v_Mail_Conn, v_From);
utl_smtp.Rcpt(v_Mail_Conn, v_Recipient);
utl_smtp.Data(v_Mail_Conn,
-- write header
    'Date: '   || to_char(sysdate, 'Dy, DD Mon YYYY hh24:mi:ss') || crlf ||
    'From: '   || v_From || crlf ||
    'Subject: ' || utl_encode.MIMEHEADER_ENCODE(v_Subject) || crlf ||
    'To: '     || v_Recipient || crlf ||
    'Cc: '     || v_Cc || crlf ||
    'X-Mailer: Mailer by Oracle UTL_SMTP' || crlf ||
    'X-Priority: 1' || crlf ||
    'MIME-Version: 1.0'|| crlf ||       -- Use MIME mail standard
    'Content-Type: multipart/mixed;'|| crlf ||
    ' boundary="-----SECBOUND"'|| crlf ||
    crlf ||
-- add message body
    '-------SECBOUND'|| crlf ||
    'Content-type: text/html; charset=UTF-8'|| crlf ||
    'Content-Transfer-Encoding: base64'|| crlf ||
    crlf ||
    utl_raw.cast_to_varchar2(utl_encode.base64_encode(utl_raw.cast_to_raw(v_body)))||
    crlf ||
-- add csv attachment
    '-------SECBOUND'|| crlf ||
    'Content-Type: text/plain;'|| crlf ||
    ' name="excel.csv"'|| crlf ||
    'Content-Transfer_Encoding: 8bit'|| crlf ||
    'Content-Disposition: attachment;'|| crlf ||
    ' filename="excel.csv"'|| crlf ||
    crlf ||
    'CSV,file,attachement'|| crlf ||   -- Content of attachment
    crlf ||
    '-------SECBOUND--'                            -- End MIME mail
utl_smtp.Quit(v_mail_conn);
EXCEPTION
WHEN utl_smtp.Transient_Error OR utl_smtp.Permanent_Error then
    raise_application_error(-20000, 'Unable to send mail: '||sqlerrm);
END;
/

Hi,
I did not think the characterset and database would matter for this problem, but here is the info you requested.
The database is an Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bi
The characterset : NLS_CHARACTERSET     AL32UTF8
And i don't have a clue about the characterset of the operating system (not even sure what the operating system is), but i think that will be utf-8 aswell.
I'm not sure what i did, to come over as rude, but i didn't mean to and i apologize for it.

Problem with inserting date

Hi,
I have a JSP form that takes the date and inserts it into the db. I'm having a problem with what format the date should be in. My insert string looks like
INSERT INTO users (USERNAME, WHO_CREATED, WHEN_CREATED) VALUES ('bob', 'jeff', (Result.getString("sysdate"))
unfortunatly whatever format I put the date in I can't seem to make both JAVA and ORACLE happy.
I'm new at this so I'm hoping that is something simple.
Thanks,
Chris
null

Hi Chris,
Are u using Business components for java i.e. entity/view objects? If yes, then the default date format for entity/ view objects is
"yyyy-mm-dd".
Aparna.

Problems with the Title Option in Adobe Premiere

I am having a problem with this option because when it shows the title panel, it is very incomplete; it doesn't have as many option as it had before, such as color or shape options. It started happening when I tried to blur our somebody and pick an hoxigonal shape from the panel and a sign showed up saying that there was a problem and then the program would shut down and wouldn't open later on unless I restarted the computer. Now, it opening without any problem but the title panel is still very basic.

What the other users have said is correct. Premiere captures through FireWire or through SDI/HDMI via a 3rd party solution.
For your situation I would say the best bet is to connect you camera to your computer via USB or use a card reader and copy the entire directory to your hard drive and ingest into Premiere via Media Browser.
If you Google 'how to make stop motion in premiere pro' there are tons of great tutorials.
Best,
Peter Garaway
Adobe
Premiere Pro

Keyboard problems with insert button

Hi, I'm having problems wih the insert button. It doesnt work when i press to activate it. However, this button is also used with the function key to toggle scroll lock which works. What is the problem? Is my labtop defective? I also have this problem with my desktop keyboard. Is it some kinda setting that I disabled because it worked on my desktop keyboard a few days ago and I don't remember setting any different preferences.
My labtop is the the U550. It is 2 days old.

Quote from: mild0d on 21-July-12, 03:01:44
Has anyone had any problems with their keyboard? I bought a gt60 back in april. Everthing with the laptop has been great except for the "W" key. It works fine typeing but in a game and trying to go forward it will stop working and I will have to repress. I also noticed that if I have just used the keyboard and stop using it for a minute it will make this crackling sound. It has freaked me out a couple times.
Regardless, if it was any other key I would have had no problem but it is pretty much my main gaming key. I RMA'ed through msi and sent it off tuesday. Had anyone had any experience with MSI laptop rma service? I am just wanting to know what type of turn around time i will have?
Having the exact same issue with my GT60 :-(

Problem with inserting html code.

Hello,
I have a problem with the inclusion of this code html connected to the CSS style sheets:
<head>
<link href='http://fonts.googleapis.com/css?family=Raleway:320,320,300' rel='stylesheet' type='text/css'>
<link rel="stylesheet" type="text/css" href="assets/normalize.css" />
<link rel="stylesheet" type="text/css" href="assets/demo.css" />
<link rel="stylesheet" type="text/css" href="assets/component.css" />
</header>
    <div class="grid">
    <figure class="effect-lily">
    <img src="assets/1.jpg" alt="img01" class="effect-honey"/></figure>
</a>
</section>
</div>
</body>
</html>
1) Does not appear in the preview thumbnail adobe muse.
2) The pull-down menu or previously entered disappears from display problems once exported the site in html.
Removing the html code menu work correctly.
Where is the problem ??

Most likely there is a critical code error somewhere. Use the W3C validation tools to check your CSS and HTML code.
CODE VALIDATION TOOLS
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
Nancy O.

Problems with inserted datagridview checkbox column

I have a few problems with a checkbox column added to a datagridview. The datagridview is bound by a binding source whose datasource is a datatable. I also add in the code a checkbox column:
private
void InitializeDataGridView()
            dgvInvoices.ColumnHeadersDefaultCellStyle.Font =
new Font("Arial", 10,
FontStyle.Bold);
DataGridViewCheckBoxColumn chkColumn =
new DataGridViewCheckBoxColumn();
            chkColumn.FlatStyle =
FlatStyle.Standard;
            dgvInvoices.Columns.Insert(0, chkColumn);
            dgvInvoices.DataSource = bs;
            cmbInvoicingCriteria.Text =
"(All)";
DataGridViewBinding.CreateColumn(dgvInvoices,
"Date", "Date",
DataGridViewContentAlignment.MiddleLeft);
DataGridViewBinding.CreateColumn(dgvInvoices,
"Invoice", "Invoice",
DataGridViewContentAlignment.MiddleLeft);
DataGridViewBinding.CreateColumn(dgvInvoices,
"Customer", "Customer");
DataGridViewBinding.CreateColumn(dgvInvoices,
"Name", "Name");
DataGridViewBinding.CreateColumn(dgvInvoices,
"Count", "Count");
DataGridViewBinding.CreateColumn(dgvInvoices,
"Total", "Total");
DataGridViewBinding.CreateColumn(dgvInvoices,
"Driver", "Driver");
DataGridViewBinding.CreateColumn(dgvInvoices,
"Status", "Status");
DataGridViewBinding.CreateColumn(dgvInvoices,
"ARHID", "ARHID");
DataGridViewBinding.CreateColumn(dgvInvoices,
"AR", "AR");
            dgvInvoices.Columns["ARHID"].Visible =
false;
            dgvInvoices.Columns["AR"].Visible =
false;
this.dgvInvoices.Columns[0].DefaultCellStyle.Font =
new Font("Arial", 18,
FontStyle.Bold);
this.dgvInvoices.Columns["Date"].DefaultCellStyle.Font =
new Font("Arial", 10,
FontStyle.Bold);
this.dgvInvoices.Columns[2].DefaultCellStyle.Font =
new Font("Arial", 10,
FontStyle.Bold);
this.dgvInvoices.Columns["Customer"].DefaultCellStyle.Font =
new Font("Arial", 10,
FontStyle.Bold);
this.dgvInvoices.Columns["Name"].DefaultCellStyle.Font =
new Font("Arial", 10,
FontStyle.Bold);
this.dgvInvoices.Columns["Count"].DefaultCellStyle.Font =
new Font("Arial", 10,
FontStyle.Bold);
foreach (DataGridViewColumn dc
in dgvInvoices.Columns)
                dc.ReadOnly =
true;
if (dc.HeaderText.ToLower() ==
"count" || dc.HeaderText.ToLower() ==
"name" || dc.Index == 0)
this.dgvInvoices.Columns[dc.Index].AutoSizeMode =
DataGridViewAutoSizeColumnMode.AllCellsExceptHeader;
else
this.dgvInvoices.Columns[dc.Index].AutoSizeMode =
DataGridViewAutoSizeColumnMode.Fill;
            dgvInvoices.DefaultCellStyle.Alignment =
DataGridViewContentAlignment.MiddleCenter;
            dgvInvoices.Columns[0].ReadOnly =
false;
            dgvInvoices.Columns[0].Width = 25;
            dgvInvoices.Columns[0].SortMode =
DataGridViewColumnSortMode.Automatic;
The problems I have here are
1. The first checkbox doesn't check off (it used to work when the width was 25 but then I added the code ontop to make the autosize mode of this columns to allcellscellsexcept header it stopped working. I need that though because if I don't make the autosizemode
= all cells except header then when I make the form narrow the checkbox column disappears.) I was wondering why this is happening, and how to fix it.
2. Also this column is not sortable. I added to my code  dgvInvoices.Columns[0].SortMode = DataGridViewColumnSortMode.Automatic;
but it doesn't seem to work.
3. Whenever I sort another column the checked off checkboxes lose their focus. I understand that can be a problem with a bound datagridview and one unbound column, but how can I fix it?
Debra has a question

I loaded the data for all the rows from a datatable on the form. The checkbox column is that connected to that bound data. it's just there and I need to be able to tell if each row was checked or not, and I need to be able to sort the checkbox column. I
also need to be able to sort all the other columns without losing the check. The only thing commenting out the foreach would help would be that the first checkbox can be checked, but I want it to be autosizemode = allcellsexceptheader and I want to understand
why it's not working like this. Would you have any ideas? Below is how I bound the datagridview for all columns except the checkbox column.
  private
void LoadDataGridView()
DataGridViewBinding.BindWithData(false, dsInvoicingFilter.Tables[0], dgvInvoices, lblEntryCount, bs);
if (dsInvoicingFilter.Tables[0].Rows.Count == 0)
                btnDelete.Enabled =
false;
                btnOpenInvoice.Enabled =
false;
                btnPrint.Enabled =
false;
                btnSaveAsInvoice.Enabled =
false;
                btnVoid.Enabled =
false;
                btnShip.Enabled =
false;
else
                btnDelete.Enabled =
true;
                btnOpenInvoice.Enabled =
true;
                btnPrint.Enabled =
true;
                btnSaveAsInvoice.Enabled =
true;
                btnVoid.Enabled =
true;
                btnShip.Enabled =
true;
                bs.Position = 0;
            dgvInvoices.Columns[0].Width = 25;
            txtSearch.Text =
public static
void BindWithData(bool autoGenerateColumns,
DataTable datatable,
DataGridView datagridview, Label lblDGVEntryCount,
BindingSource bs)
            datagridview.AutoGenerateColumns = autoGenerateColumns;
            bs.DataSource = datatable;
            datagridview.DataSource = bs;
            DataGridViewEntryCount(datagridview, lblDGVEntryCount);
//ExpandColumns(datagridview);//to do it slows it down. Why can't the dgv remember to do it from when initialized it?
Debra has a question

Problem with inserting title sheet in sequence

Similar Messages

Maybe you are looking for