Problem with Inspire T7700

Hey, just newly bought myself that speaker system, and I can't seem to get the speakers, apart from the front left and front right working. I'm using a Sound Blaster Live! 24-bit 7.1 card, but have no idea how to get the other speakers working. Ideas?

Ok, let's start from the beginning.
The T7700 uses 4 colour-coded inputs. These 4 inputs should then be connected either to a soundcard or a decoder by a 3 jack cable (also colour coded). Do you connect your soundcard by a cable with 4 jacks in one end (into the subwoofer) and 3 jacks in the other end into your soundcard? This is the most important step, if you have connected them correctly we can go on to other venues of trying to get it to work.

Similar Messages

Having Problem With Inspire 5.1 5300 rear speaker...

After using my inspire 5.1 5300 for few year... right now im having problem with my rear speaker... just one channel was unable to start... Anyone know about repairing for speaker ? I Have try to switch to other channel it seem that just that rear speaker was unable to start... all should be ok... week before i still hearing sound from that rear speaker... but now it was unable to start. Anyone Have Any Idea Please Tell Me. Thank You

Just to clarify, by "FCP 5 friendly source material," he means video files that are a format (codec) that FCP 5 supports. What FCP 5 supports can be found in the EASY SETUP list. If the format you are working with isn't there, say if your footage is H.264 or MP4 or some other web compressed format, FCP won't work properly. It needs to be in an editing codec if you want FCP 5 to work with it.
Also, you need to make sure that your sequence settings match the settings of the footage you are trying to edit. If you add a clip to the sequence, and immediately have to render, that's a big clue to say that something isn't right. You should edit without rendering at all.
The most important thing you need to do is properly set up your project from the start, and the best way to do this is to choose a setting from the Easy Setups, located under the Final Cut Pro menu. Once you do this, you’ll need to create a new sequence. This is because the sequence that is already in your new project is setup for the typical default setting of DV/NTSC, or for the settings of your last project, which might not match what you are currently working with. So delete SEQUENCE 1 and create a new sequence:
This new sequence will contain the settings you chose in the Easy Setup menu, and should match the format you captured

Problem with inspire 280 speakers

well i own creative inspire 280 speakers but im having trouble with them. First when i connect it to some devices background electric noise appears when im not playing anything, then if I connect the jack till the end, the played sound will only be mono, the only way to play it stereo is if i dont put the 3,5mm jack till the end but it still shows some background noise. How can i solve this issue?

i have a similar problem with my 280 speakers.

Problem with inspire 5100 digital decoder

I have some problem with the decoder included with the Inspire 500 digital. I usually have it connected by soundblaster's audigy digital out to decoder's coaxial digital in (SPDIF). and recently sound has dissaperas replaced by a chipping and cropping low noise. Have you any ideas about it's. When I connect the soundblaser's speakers out to decoder's line in works only for stereo (losing 5.1 capabilities), and bypassing the decoder i can get 5.1 sound, but i can't use the included remote control to change volume or anything.
Thank you.
I'm sorry for my poor english, it's not my native lenguage.

I'm not sure exactly how you're connecting things. You say you connected an optic out to a digital DIN on the receiver? These are totally different connectors.
The output on the card itself isn't optical. What you could use is a minijack to RCA (female) adapter, and then connect a standard RCA to RCA, male to male (SPDIF) cable to that, which plugs into the coaxial input on the receiver. Alternati'vely you could use a minijack to Digital DIN adapter and connect the DIN cable to that, and connect to the receiver.
Do you have the SBLi've 24-bit External? Do you mean you connected the optical output to the optical input on the receiver?
It may be best to contact Customer Support to speak to them one-on-one, to go over the connections and settings, if you're unsure of which to use.
Cat

Problem with inspire t7900

Hi,i just bought inspire t7900 speakers and i have a big problem..
there is no sound! actually i have tried everything..there is no connection problem,i also bought
the creative sound blaster audigy which is recomended for this kind of speakers,i have checked anything about settings but nothing...i also have tried different operating systems(xp home sp2,xp proffesional sp2) but the problem remains..
if you need additional information, my pc is new very good system(intel core quad proccessor,motherboard asus p5kc) so i can't find out where is the problem!
can anyone help me plz?

Hi, I have the same problem. Actually, it was working for a while, then all of a sudden: no sound from any of the speakers! Plugging headphones into the remote works, so there doesn't seem to be a problem with the connection between computer and the system; but there's definitely something wrong with the speakers... Any ideas here? I was really enjoying them up to this point...

HELP! K8N NEO4 SLI - SOUND PROBLEMS WITH INSPIRE 7.1

People, i bought K8N NEO4 SLI, and i'm having problems with my Creative Inspire 7.1. I have certain that everything is connected in a correct way, drivers ok, but the side surround speakers doen't make no noise. Creative media is set to 7.1 channels and the speakers too...
I'm thinking that the onboard audio is a bul....
Can someone help me with this? Who here has the same kit as me?
Thanks a lot
Edinho
(brazilian guy)

Man, i'm using those standart cables offered with the product....i thing its analog, i don't know certain...
i'm very about this onboard sound...
and the worst thing, i'vc contacted creative for explanation about it and they answer me that they could'nt help, cause it's a OEM product...no response about it, have to contact MSI..
here in brazil, it's real difficult, cause anoyone cares about it...
i have absolut certain that software and hardware configuration/instalation is ok...cause i had those speakers in other PC...
i've already head tons of audio-problem topics here, and i say: K8N N4 SLI Integrated Sound is a bul...

Problem with Inspire 4.1 4400

Hi?I am having Inspire 4.1 4400 speakers. My pc supports 5.1 HD audio. So I bought the Inspire 4400. The pc-to-woofer connector is 2 pin connector. When I tried to connect with that, am able to hear sounds from 2 speakers and woofer. Other 2 speakers are not working. So now am planned to buy a Creative Sound Blaster Audiy Value. Is this support Inspire 4.1 4400?My motherboard itself supports 5.1, so adding Creative Sound Blaster Audiy Value, to be problem?Or how I can use my existing pc to setup 4.1 system??

well .. on normal surround systems the sound is played only on the 2 front speakers (+ center) and sub (im talking about music and normal movies). to play on all the speakers you need a surround environment something like a dvd or a surround game ... to play music and normal avi movies on all the speakers you should use a stereo x2 which ports the sound from the front speakers to the back speakers... your card might not have that option ( you could use audio spliters and put all the speakers on exit). creative sound cards have a stereo x2 as far as i know..
Message Edited by McTRex on 11-16-2006 10:48 AM

2 Small problems with Inspire 4400 4.1 & SB Surround 5.1 [on Vis

Hey guys?
I just bought a Sound Blaster Surround 5. external sound card (USB), which i like to use on my laptop (HP Compaq 6820s with Vista HomePremium), together with my Creative Inspire 4. 4400 speaker set. What i did is; I installed the necassary software from the CD-Rom (for Vista of course), and after installation, I checked if everything worked. It did. I had sound from all my 4 speakers, and i was able to adjust the volume of each speaker (I forgot where that option was located, but thats not important right now). After the installtion, i did the necessary reboot, and i did the recommended software update. This update installed new drivers, but they did something strange; when i click on Creative Audi-center, it says 2. CMSS 3-D. When i click on Creative Audi-console, it says 'headphones' under the speakers. I know thus only have 2. sound
Right now, i cant change it back to 4.. I know that in the Creative Audio-console, there's an option to 'change' this. But when i change my system from 2. to 4., it doesnt do anything. If i check if I did the right thing, i found out (over n over again, no matter how often i keep changing it), my configuration is still set to 2., no matter how often i change it to 4.. So there's my first problem; i cant set my system to be a 4. system.
Second problem; i'd like to use the voume control on the SB Surround 5. console for my overall volume. When i remove the wired volume control 6pin DIN cable from my Inspire 4400 subwoofer, my sound wont work. So i still have to use the wired volume control. Also, the volume control on the SB Surround 5. doesnt work (although i can mute the sound with it). Now, al this might be logic, however, hwo is it possible to overcome this obstacle with a DIN cable? My SB Surround 5. system had 9pin DIN in the back, the subwoofer of my Inspire 4400 has a 6pin DIN cable in the back .... what can i do, to configure the volume control on my SB SUrround as my main volume control, in stead of keep using the wired volume control, which is connected to the back of my Insipre 4400 subwoofer?
Kind regards, and thnx in advance for any help!
Huub
PS: When i change my sound setting via Windows' Control panel -> Sound ->? Configure 2- Sound Blaster Li've! 24-bit External-> Quadraphonic sound, i notice that all my 4 speaker work (i checked this via the Test button), but after that, the sound hasnt changed anything when i play my mp3's via WinAmp...
Message Edited by ThaMaestro on 09-04-2008 04:29 AM

Hi,
Are you referring to the Li've! 24 bit External or the X-Fi Surround 5.
I would recommend getting in touch with support for further assistance on this.

Problem with Inspire P5800

When I connect my headphones (Creative EP 80) to the remote control of Creative Inspire P5800, it's satellites don't mute automatically
I have integrated souncard based on ALC 655 and Windows XP (licensed).
What should I do to solve this problem?
sorry for my mistakes in english, it's not my native language
Message Edited by Konstantin on 01-27-2007 10:25 PM

I think it depends on the soundcard, I don't know that model, but maybe it simply isn't able to sense a headphone is plugged in? I know SoundMax chips are able to, and Sound Blaster probably are too, but I can't seem to find that piece of information on realtek's site... So (please other users, correct me if I'm wrong!!?) I'm afraid you are just going to have to learn to live with muting center, LFE/Sub and surround channels when using headphones...
EDIT: I think the headphone jack will still work if you switch the set off, would be easier than resetting all volumelevels everytime you are done using the headphones.
Message Edited by hij on 01-28-2007 02:31 AM

Problem with Inspire 6.1 6600 subwoofer

Hello,
All of my other speakers work except for the Sub......
It is strange because everything is connected to the sub, the sound of the other speakers is good and the calibration via the Creative software reads good.
Still, the sub just doesn't make any sound.....
I have this speaker system since 2002......
Does anyone have any suggestion as to why my sub doesn't work?
Gal.

6.1 6600 speakers will have every satellites giving out different sounds and reverberation. If you have those all similare, your sound card might not be supporting channel output.
With my experience with creative, the speaker systems are not suposed to be operated at full volume, at full bass enhan*****t. The reasons are:
1) The power supply will be one-third more capable than the speaker rating. So, full amplification of the sound signal is not preferable.
2) Even if the fidility of sound card is excellent with more than 98 dB SNR, the amplifier at the speaker system need not be as good as that at the card (because, it amplifies the signal to much higher a value)
3) As I have seen with most of the speaker systems (including high end theatres), the bass enhan*****t is fully functional with woofer and subwoofers of more than 100 watt RMS. That too will exhibit chattering after an year or two, at high volumes.

Speaker problems with Inspire 5.1 Digital 5

Hi, can anyone help me, I have just conected my surround sound 5. but only the left and right speakers are working, the centre and rear speakers are not working althogh when I did the test they seemed OK.
Cheers Sarah.

bobbydazzler wrote:
Hi,
Thank you for your reply, can you please explain to me how to set the speakers to 5.
Thanks
Sarah.
Depends on your software (no card model mentioned, no mention are you using digital/analog output signal), but in generally there is a special utility to use to select speaker system (on creative software it's called Creative Speaker Settings").
This application can be launched from Surround Mixer (speaker icon,) or using start -menu selection on program group Creative.
If you don't have this software bundled with your card (or have not installed it (yet)), then you can set speakers on Windows Control Panel's - Sound and Multimedia settings --> on Audio tab, select Advanced (button) on Sound Playback --> select speakers from droplist.
.jtpMessage Edited by jutapa on 09-8-2005 07:3 PM

Speaker problems with Inspire 5.1 digital 5500

Hi can anybody help me, I have just connected my surrounded sound Inspire 5.1 5500 but the rear and the centre speakers are not working, the left and right are fine. When I did the test they all seemed OK, but now there is no sound from those three I mention. Can somebody please help.
Thank You
Sarah.

Thank you for the information.
I Understand that I have to upmix to 6.1 (I think anyway) but I dont understand how I can get the creative in my programs, I think I need to go through the mediasouce to upmix but I do not know how to get access to the mediasouce, I have gone through the creative webiste trying to figure out how to download it but to no avail. Sorry to be a pain, but can you possible give me some instructions.
Thanks
Sarah.

--Static problem with inspire p5800 speaker setup--

Hi,
I have recently purchased this speaker system (refurbished) and after hooking it up, I noticed static, a permanent eerie sound that is coming out of the speakers and I dont know how to get rid of this. I have a SB Live card, don't know if it is compatible or not but I get output, its just that the static is present and very annoying. Any suggestions will be appreciated, thanks.

I think it depends on the soundcard, I don't know that model, but maybe it simply isn't able to sense a headphone is plugged in? I know SoundMax chips are able to, and Sound Blaster probably are too, but I can't seem to find that piece of information on realtek's site... So (please other users, correct me if I'm wrong!!?) I'm afraid you are just going to have to learn to live with muting center, LFE/Sub and surround channels when using headphones...
EDIT: I think the headphone jack will still work if you switch the set off, would be easier than resetting all volumelevels everytime you are done using the headphones.
Message Edited by hij on 01-28-2007 02:31 AM

Problem with inspire T6100.help!!!

so...i have got T600 5.1 sound system but it doesn't work.when i put my monitor speakers in it works.did is drivers or something?hmmm when i buy my speakers there was no cd

When you switch on the set, is there a light glowing on the front of the front right speaker? It shows wether or not your speaker system is powered correctly.

Problem with the out so

hi
its the firs time for me here
i have audigy2 zs with inspire T7700 spekers
they was working great form me
but in last few days i got this problem , when i run the channle test i got little noisy sound form the center speker , i change the speker with other one but the center soud still not working good , i changed the wire but the same too , then after a while there was no sound from the left rear too , and i do the same changes but still not working
what will couse this
is the sound card not function good or the spekers
please i need an answer as soon as possible
best regards

http://support.apple.com/kb/TS1559

Problem with Inspire T7700

Similar Messages

Maybe you are looking for