Problem with 'install credential for Adobe Document Services'

Hi Folks,
I am trying to install credential for Adobe Document Services but I have got problem with some facts that are explained in tutorial how to install credential.
1. I do not have directory persistentcom.adobe~Trust.. under my directory server0
2. where to find 'filename.pfx'?
3. I do not have Document Services Configuration in my visual Administration tool
The tutorial that I am trying to do is located on <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webdynpro/wd%20java/installing%20adobe%20document%20services%20credentials.pdf">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webdynpro/wd%20java/installing%20adobe%20document%20services%20credentials.pdf</a>
So if someone can help me how to overcome this problem I would be very thankful.
Kind Regards to all.
Aleksandar

Hi Sharadha,
You could go to SAP Software Distribution Center with in SAP Market place . You could search for adobe ther in S/W search . It will list all the available Aobe designer. Latest version is ADOBE LIVECYCLE DESIGNER 7.1 .
regards

Similar Messages

Issue Installing credential for Adobe Document Services on 2004s Java Trial

Hi there
I'm having a problem after the following the steps below to Install the credential for Adobe Document Services on SAP NetWeaver 2004s Java Trial Version SP9:
Steps Followed:
In order to work with Adobe Document Services you need to install a valid credential. A preliminary credential is available at sdn.
To install a credential perform following steps:
Extract the archive
Copy the file filename.pfx to the directory <INST_DRIVE>:\usr\sap\J2E\SYS\global\AdobeDocumentServices\TrustManagerService\trust\credentials
Register the password for credential as described below:
Log on to the Visual Administrator (<INST_DRIVE>:\usr\sap\J2E\JC00\j2ee\admin\go.bat)
On the Cluster tab, choose Server 0 -> Services -> Document Services Configuration
Error Received:
I'm getting an "error while loading service document services configuration" error in the Visual Administrator tool, the Properties Tab is blank and I don't have a Runtime tab to select the credentials?? and therefore can't install the credentials that I've downloaded.
Any ideas would be appreciated.
Thanks

Hi Sharadha,
You could go to SAP Software Distribution Center with in SAP Market place . You could search for adobe ther in S/W search . It will list all the available Aobe designer. Latest version is ADOBE LIVECYCLE DESIGNER 7.1 .
regards

Error in installing creditionals for Adobe Document Services

Hi All,
I have installed SAPNW2004sJavaSP9_Trial on my local machine and when I try to register the Register the password for credential by following the steps below I face a problem in step 4. The error is a pop up as enclosed.
An error occured while indexing the credential files:
com.adobe.service.sap.ConfigurationException:An error occured while indexing the credential files
1.Log on to the Visual Administrator (C:\usr\sap\J2E\JC00\j2ee\admin\go.bat)
2. On the Cluster tab, choose Server 0 -> Services -> Document Services Configuration
3. On the Runtime tab, select Credentials
4. Choose Browse to search for the name of the credential and then Select
5. In the Alias field, enter the alias of the credential you installed, for example ReaderRights. (Entries for the name of the credential are case-sensitive)
6. In Password field, enter the password you received together with the credential you installed (filename.txt in <zip_extract_folder>\SAPNetWeaver04SneakPreviewJavaSP11\ADSCredentialFiles). Confirm the password again and then click Add
&#56256;&#56451; Restart the following services for the changes to take effect: PDF Manipulation Module, Document Services Trust Manager
7. Restart also the application com.adobe/AdobeDocumentServices
I followed the steps given the following posts
Latest NW Sneakpreview SP16 and Adobe Interactive Forms
TrustServices Credentials problem
Adobe Document Services: How to upgrade from ADS SP 9 to ADS SP 15
But, it still does not resolve my problem. I also upgraded the version to SP16 and yet it does not resolve the problem. Can someone tell me what could be wrong?
Thanks for all your help in advance.
Regards,
Divya

Hi,
All the form-related services have to be started first: the IIOP on dispatcher and server, all the Document Services *, PDF manupulation and XML form module.
Then you should be able to register your credential.
Francois

Problems during ADSUser Configuration for Adobe Document services

Dear Netweaver experrts,
I'm trying to activate a Adobe Document Service on my local Netweaver 2004 WebAS sp20.
I realized that my system is missing the appropiate user and grups which have to be configured
using the Visual administrator and the Security Provider mask.
My problem is that I can't create a user or group in my Security provider mask. The Create user and create Groups buttons are grey.
So I don't know which settings are wrong on my system and prevent the creation of new users and groups within the Security provider configuration.
Can you provide any hints ?
Best regards,
Daniel

Hi Danile,
Check whether you got the permissions to access Security Provider.
If you got the permissions then you will find the pencil button above runtime tab in that screen.Click on that and it will allow you to create users.
With regards,
Pradeep.B

Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?

Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?
I have been trying to install Photoshop CS6 & CC and Acrobat Pro XI on my Mac Pro (late 2013). I keep getting a 'configuration' error message and wondered if the problem was wide spread.
TIA,
Jerry

Thanks, Martin.
Good to hear someone has had success. The lack of it here is frustrating and depressing.
Thanks again,
Jerry

Java startup property for Adobe document services

Hi guyz, since a while i'm facing a random issue when i generate pdf. All the configuration has been done, but when look at in configtool i see a missing parameter:
-Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine. services.ts.jts.ots.PortableInterceptor.JTSInitializer
Because it's in the recommendation parameter guide i guess it should be in, but someone can tell what those parameter deals about ?

Hi,
Yes, this service is mandatory if you want to use Adobe document service. It should be set for all server nodes in the config tool. This is Java startup property for Adobe document services. Without this parameter adobe service will not start as a result you will not be able to open adobe documents.
Thanks
Sunny

When is Patch for ADOBE DOCUMENT SERVICES 7.00 SP12 availaible

Hello,
we want update netweaver2004s to SP12 (delayed at 21.05.2007), when is
Patch for ADOBE DOCUMENT SERVICES 7.00 SP12 availaible?
Best regards
Oliver Prodinger

Hello Oliver,
ADS patches are released to an SP, when there is reason for a patch, e.g:
SP11 patch 1 contained support for x86-64 Windows.
We can not tell you yet, wether there will be patch for SP12 Version of ADS.
SP12 stack will contain SP12 of ADS as well, what is the newest available.
Best regards,
Dezso

Installing and Configuring Adobe Document Services For Print Forms

Hi,
I want to use Adobe Document Services,for Print Forms Scenario,on ABAP side.
I installed the Adobe document Services following the steps in the Installation Guide.I obtained the Credentials file and supplied it during installation.
Then i followed the steps in the configuration Guide,except for the SSL connection part, as i have chosen Basic Authentication .
The Web Service is running and on opening the home page,when i test the method rpData,it asks for Username and password,when i supply my username password it says, user does not have rights to method rpData.
I even tried using J2ee Admin rights,user with SAP_ALL rights, and ADS_AGENT.
When i test the service from ABAP side,using the RFC destination i created on Client 400,from where i want to use it, the test shows status code OK.
When i test a form through transaction SFP,it asks for USERNAME and password,which i tried as my USERID,ADMIN ID with SAP_ALL rights, even with the users i created during Configuration like ADS_AGENT, ADSUser etc.
Our J2ee Engine is installed on Client 200,i installed the ADS on Client 200 and created the users ADS_AGENt(service user with role SAP_BC_FP_ICF) and ADSuser on Client 200.
I also activated the ICF services and created the destination for the destination service using Visual Administrator.
My Issues:
1)To test the Webservice,what USER ID password needs to be supplied?Do i need some Special role or rights?
2)During Configuration ,when i create a USer in SAP Web AS ABAP for Basic Authetication,after creating ADSCallers Role and assigning to ADSUSer ,in Visual Administrator,after selecting com.adobe/AdobeDocumentServices*AdobeDocumentServicesAssembly.jar ,under ADSCallers,i ama ble to see the both the users ADSUser(user in j2ee Engine for basic authentication ), and ADSUSER (user type system in ABAP),are visible,
When try to add ADSUSEr by choosing ADD,from USER Tree , it doesn't do so.So i Added the ADScallers group instead,thus indirectly both users added.Can this be a Problem?
3)What else do i need to do?Am i missing something?
Please help.
Regards,
Siddhartha

Hi all,
I am having an issue in which my ecc could not use properly the ADS on the EP.
I could properly execute FP_PDF_TEST_00 from se38 transaction which gives the correct version no of ADS. Also I am able to get the correct version no by giving username and password at http://<J2EE_host>:<J2EE_port>/AdobeDocumentServices/Config which seems like the ADS is working properly in EP.
However when the abaper is trying to run his form using spf like ZFORM_VENDOR it is showing error like
" Error during activation Message no. EU837 "
Can you please shed some light on what all steps I need to check to ensure that ADS is working properly ?

Is Adobe Credentials file always needed for Adobe Document Services

Hi,
We are setting up Adobe Document Services in our SAP ME 6.0 Environment.
We are getting this error in Default trace file when printing an adobe template:
"Unable to locate any credential aliases associated with CS credential
alias: ReaderRights"
In the help for ME 6.0 chapter "Setting up printing" it is stated that you install a credential file. But according to SAP Note 736902
you should only need the credentials file if you are running interactive forms, which we are not. We only want to print a PDF template which we have mapped against the file created from SAP ME.
Can anyone help me and tell me if I really need the credentials file or if I don't need it how I can proceed with setting up ADS without the credentials file?
Br,
Johan Nordebrink

as far as I was aware, you do need the credentials file

Configuring log location for Adobe Document Services specific log

Hi All,
Interesting one for you. I am currently helping to resolve a PDF rendering issue which is intermittent. I have sent the default trace logs to SAP, however, there is an additional adobe specific log which should be written to /usr/sap/<SID>/SYS/global/AdobeDocumentServices/renderErrorLog/errorFiles. However, my default trace is saying that they are written to the the wrong SID and also puts a double // between gloab and AdobeDocumentServices, which of course is never going to work.
The system in question is a fully supported system copy of our Production environment, created using SAP sapinst tools.
If anyone can point me in the right direction to edit/configure the renderErrorLog location I would be most relieved as there does not appear to be anything in the Visual Administrator or Config tool.
many thanks

Hi,
All the form-related services have to be started first: the IIOP on dispatcher and server, all the Document Services *, PDF manupulation and XML form module.
Then you should be able to register your credential.
Francois

Problems with signing certificate for Adobe CC Applications

I've just purchased Adobe CC and set out to install quite a few apps. Photoshop, Illustrator and Fireworks all installed without a hitch.
Then I tried installing the Edge tools and Lightroom, and that's when the trouble started.
They failed. The error was this (I've seen this several places):
Exit Code: 7Please see specific errors below for troubleshooting. For example, ERROR: DW006 ... -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 2 error(s) ----------- Payload: AdobeLightroom5CCMPkg-mul 5.0.0.0 {4b06fc24-6249-4c57-9830-6008a3ce9a80} -----------ERROR: DW006: Apple Package failed to install successfully.ERROR: Third party payload installer Adobe Photoshop Lightroom 5.pkg failed with exit code: 1-------------------------------------------------------------------------------------
Did some research and tried the following things:
Ran the cleaner tool
booted in to safe mode and tried reinstalling
uninstall/reinstall AIR (I think this was an outdated suggestion)
Verified and Fixed disk permissions
Created new admin user account and tried installing from there
No luck. I checked the install logs:
installer: Certificate used to sign package is not trusted. Use -allowUntrusted to override.
OK - something with the certificte. So I grab the downloaded packages from the /tmp folder for the apps. When I try to install the packages there, I get the warning that the package is not signed by a trusted certificate - I say install anyway and everything works!
Except Lightroom 5. I can't get that oe to go. It never asks me to override the certificate. It just tries to install and fails just as it did through Adobe CC Desktop. I can dig in to the deploy packages and install it there, but when I launch it, it asks for my serial number, which we don't have via Adobe CC, correct?
So what's going on? I seem to be the only person having this problem. I spent 3-4 hours this morning with Adobe support. I have them screen control and they couldn't get it installed.
Any ideas? I'm on a newest version MacBook Air, i7, 8GB RAM, 256GB SSD running OS X 10.8.4. (I swear at one point scrolling through the endloess lines of install logs I saw something about my os not being supported, but that can't be right, can it? I'm 100% current - I can't tbe too current, right?)
Thanks in advance,
Adam Barney

Wow. I have no idea how this happened, but at some point, I lost my Apple Root Certificate - that seems important. I reinstalled it from http://www.apple.com/certificateauthority/ and all is right with the world - and Adobe CC Desktop Installer.

Problems with Installing Software for XFi Extreme Gamer C

Hi, I've just bought an XFi Extreme Gamer card. I've got a dual boot system (two difrent hard discs). The board installed ok under XP and works OK. The problem is that under Win2K Pro the installation comes up with an Entry Point Error for CTXFISPI.EXE WTSRegisterSessionNotification could not be located in WTSAPI32.dll. These files exist on the CD and Hard dri've. I do get sound and music etc but the problem is that when I try to launch the volume control or console etc it says "The current selected audio device is not supported by the application. Do you want select another audio device now?". If you say yes you get the choice of "Follow Windows Default". Now checking the device manager etc you find that Creative SB XFi is there and has no problems. There doesn't seem to be any updated drivers for Win2K on the site, I'm at a bit of a loss what to do next, I only upgraded to try and play some newer games, hasn't helped so far. Also can't launch the diagnostics programme either.
Any suggestions would be great, I don't if it's Windows fault or Creative at the moment.
Regards. M B
P4 Asus P4PE
2GB
NVIDIA 6600

are you blind man? that what nearly every post on this forum is about the complete lack of vista support. Yes we all have the driver but you can forget the console and all of the advanced connectivity you paid for. Creative are just a joke in my opinion why can't they get this sorted i also use optical in for my xbox 360 i'm totally pissed off with this situation. Come on creative get your act together and get some proper support sorted!!!!

Problem with credit managment for FI-documents

Hello,
is there any possibility to modify the value "Total receivables" for the creditmanagment?
I customize the position-type as not active for "credit active" and the values for the sales part are set correctly for the credit managment.
But everytime I create an invoice and the FI-documents are created, the value for the "total receivable" in report
RFDKLI40 is wrong.
If I create a new sales document then, the creditmanagment checks with the wrong value from "total receivable" and that´s wrong.
Line " where vbeln = lt_vbrk-vbeln
and cmpnt space."
in report LVFDSF02 is set.
Thanks for your help
Nicole

After Apple tightened up some security issues the stores have been a bit more picky about the format of the billing address. Most folks who have encountered this issue have been able to solve it using the standardized addressing format created by the US Postal Service. Go to the USPS Zip Code lookup website and enter your address. Copy your address exactly as the USPS formats and presents it into your iTunes account.
https://tools.usps.com/go/ZipLookupAction!input.action

Configuring Adobe Document Services

Hi
I am working on developing a dynamically generating a non-interactive form, such as an order confirmation.
When i run it says there is an internal server error . I think the problem is that i have not configured Adobe Document services.
Can you please let me know how to configure the services.
Thanks
Sharath

Hi,
Please be more specific regarding the error.If you are having problems with the Configuration of Adobe Document Services please do refer the following link :
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e4e9afb-0701-0010-f8a8-b8cd093662c2
For the latest version of Configuration guide login to
http://service.sap.com/instGuides.You will need to have need a SMP ID.
Regards,
Vijith

Adobe Document Services add-on download location for CE 7.1 SP1

Hi All,
Recently i downloaded the CE 7.1 SP1 and installed successfully, now i want enable the Adobe document service in CE 7.1.
I found some forums we have to install the Add-on for Adobe document service, where can i get this add-on and how to configure this please let me know .
Is it possible to configure Adobe document service on CE 7.1 trail version.
Thanks and Regards,
Sridhar

I found we have to download from SMP....

Problem with 'install credential for Adobe Document Services'

Similar Messages

Maybe you are looking for