Problem with installed audio

each time i install the creative sound blaster cd it remains for one day then i am not able to bring it up to access the mixer or anything else. could anyone please offer suggestions. i have removed the board and reinstalled and the problem continues.
thx.
link

link,
Try cleansweep the sound card. Follow the steps from Knowledgebase article.
http://us.creative.com/support/kb/article.asp?l=2&sid=72
Jason

Similar Messages

Severe problem with installing and starting Audio-DVD Pla

Hi,
after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
Any ideas?
Best regards and thank in advance,
PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

Hi,
after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
Any ideas?
Best regards and thank in advance,
PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

TS1362 my iTunes wont play music or videos when i open it it comes up with "iTunes has detected a problem with your audio with your configuration AudioVideo playback may not operate properly"

my iTunes wont play music or videos when i open it it comes up with "iTunes has detected a problem with your audio with your configuration AudioVideo playback may not operate properly" i have uninstalled it and reinstalled it twice and it stil lcomes up with that message every time I opentheiTunes icon I dont knowwhat to do

Hello Wade,
This is typically indicative of an issue with the installation of QuickTime on your computer. The following article provides steps for reinstalling QuickTime to resolve the issue.
"iTunes cannot run because it has detected a problem with your audio configuration"
Resolution
QuickTime may need to be reinstalled. Follow the steps below to uninstall QuickTime and then download and install QuickTime using the QuickTime standalone Installer.
On the Start menu, click Control Panel.
Follow the steps appropriate for your Windows operating system below.
Windows XP and Windows 2000: Open the Add or Remove Programs control panel and selectQuickTime in the list of currently installed programs.
Windows Vista and Windows 7: Click Uninstall a program (or if using Windows Vista's Classic View of the Control Panel, click Programs and Features) and select QuickTime in the list of currently installed programs.
Click the Remove button (or Uninstall for Windows Vista and Windows 7) and follow the prompts to remove QuickTime from your computer.
Download QuickTime. Note: There are two options for downloading QuickTime, be sure to select the option that does not include iTunes.
During the download:
If you choose to run the installer, proceed to the next step.
If you choose to save the download, double click the QuickTimeInstaller file, then proceed to next step.
Follow the on-screen instructions to install QuickTime.
Reopen iTunes.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371
Cheers,
Allen

Itunes won't run because of some problem with my audio configuration? help!

it specifically says "itunes cannot run because it has detected a problem with your audio configuration". anybody know how to fix that. all i did was when my itunes was werking perfectly fine i was uploading some videos onto it but wen i did it was freezing so i did it again and it froze again so i deleted itunes and installed it again. thats when the problem happened. i tried installing quicktime again. that didn't work then i organized my music and video files but it still wouldn't work. my speakers work good. id on't know what the problem is. CAN ANYBODY HELP????!!!!

Perhaps this Apple KnowledgeBase article will help:
iTunes 7 for Windows: iTunes had detected an audio configuration problem
Good luck.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
Regards.

Itunes cannot run because it detected a problem with your audio config.

I keep coming up with this message. I feel like I have tried everything. Uninstalling---reinstalling---installing earlier versions---even tried apple's help page regarding this error. Nothing seems to work. Anyone have any ideas?

I have exactly the same problem. Everytime I try to open itunes it shows the dialog "itunes has detected a problem with your audio config..." and then when it "opens"
has no background, so it's impossible to do something. I've tried to reinstall itunes and quicktime in different ways like both of them separately and following every instruction in Apple's Web site like article #304424. I've installed prior versions for those programs too and the problem persist, tried to clean up the registry, etc. I don't want to reinstall Windows to solve this issue 'cause it seems to be only way to get rid of this! =( HELP!!!

ITunes Cannot Run It Has Detected a Problem With Your Audio Configuration

Well... I've just come back from christmas with my new green iPod nano (second gen), and I try to use iTunes. It has an "...unknown error (-200)." So I download the new iTunes. NOW it says "iTunes Cannot Because Run It Has Detected a Problem With Your Audio Configuration." I've tryed the support but it doesn't have any WORKING solution. If SOMEONE could PLEASE tell me whats going on, I'd be REALLY greatful.
I've been trying to figure this out for almost 3 days now and I'm hanging by a string here.
HP Pavillion Windows XP Windows Media Edition

It is your QuickTime application, actually. What you want to do is go into your Control Panel, and then Add/Remove Programs. Find QuickTime, click on it, and click on Remove, and then follow through the prompts to uninstall QuickTime.
Then, go here to reinstall it:
http://www.apple.com/quicktime/download/win.html
Make sure you choose the second option that says QuickTime for Windows (NOT the QuickTime with iTunes).
Go through the download and install, and whenever it completes, try to launch iTunes.
CG

ITunes 7.3.1 cannot run as it has detected a problem with your audio..

Hey
I installed iTunes 7.3.1 last night, and when I click to open it, a message comes up saying 'iTunes 7.3.1 cannot run as it has detected a problem with your audio configeration'
Please help
Thanks

Hi,
I got this message on the older version (7.3) of iTunes and then I got an error to do with runtime as highlighted in another thread.
I used windows add/remove to uninstall iTunes and reinstalled the latest version.
You could try re-installing the latest version.
Cheers,
Cofnchtr.

Has anyone else had a problem with the audio not keeping up with the video when switching to full screen on YouTube?

Hi. I have a OS X Yosemite Version 10.10.1 Mac Book Air, Processor 1.86 GHz Intel Core 2 Duo.
Has anyone else had a problem with the audio not keeping up with the video when switching to full screen on YouTube?
The video starts out fine, but if I click on the expand icon in the lower right corner of the screen the audio won't keep up.
Refreshing the page don't help at all. In fact, nothing seems to help once it starts.
I did not have this problem at all using Mavericks. The problem started after installing Yosemite.
Any way to fix it?

only $99, i thought it was closer to $175.

'iTunes could not run because it had detected a problem with your audio...

...configuration.'
I have just updated to the newest iTunes version from the latest version.
I have installed iTunes and when I click 'iTunes' to launch iTunes, it says this 'iTunes could not run because it had detected a problem with your audio configuration.'
I get the option to click 'OK' or 'Help'
When I click 'OK' the window closes and then nothing happens.
When I click 'Help' nothing happens.
Any advice??

It's probably QuickTime 7.3 that is the problem. Uninstall it and install version 7.2 instead. http://www.apple.com/support/downloads/quicktime72forwindows.html

Problem in installing "audio device on high definition audio bus"

i have cq40 144tu laptop
i downgrade to XP with the nice tutorial posted on this forum.
my laptop S/N - [text removed for privacy]
P/N FZ736PA#ACJ
I M GETTING PROBLEM IN INSTALLING AUDIO DEVICE ON HIGH DEFINITION AUDIO BUS
i have tried sp39671 which was sugges in that tutorial but that not work

The other sound driver is Intel HDMI driver, it is bundled in Intel GMA driver.
Update your BIOS to the latest one and do a clean instalation of XP-SP3 then you dont need devcon utility.
See XP downgrade guide for futher detail, here
Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

Problems with M-Audio Fasttrack Pro and Garageband after 10.5.2

Hi all,
I use GarageBand daily with my M-Audio FastTrack Pro and have had absolutely no problems until I installed the 10.5.2 update.
Suddenly the Audio randomly cuts out when I'm recording, monitoring or playing back - also my recordings appear to skip and jump too. Usually I can rectify it by power cycling the Fasttrack but the problem re-occurs after about 30 seconds of recording.
I have double checked the I am using M-Audio's latest drivers and have repaired permissions and the disk. I was wondering if anyone else had had any problems with this?
All help would be appreciated, looks like I'm going back to 10.5.1 though.

Hi !
Still no answer from M-Audio but it seems that they are not in cause.
I read on several topics of Apple's Forums some similar problems with other audio devices and also with some USBhubs.
I ran some little tests and for my case, using the other USB port of the MacBook seems to resolve the problem (but that's not a permanent solution for my point of view).
Using a selft-powered USBhub works also, even on the port that makes it crash without hub.
As I studied a little bit of electronics, it looks really like a problem of power supply through USB to me. It could be some kind of micro-cuts (or micro-undervoltage) that are sufficient to cut the audio stream and freeze a bit the system but not enough for MacOSX to switch significantly to the internal audio.
But two questions still remain :
Why one USB port of the MacBook and not the other one ?
Why since 10.5.2 ?
Steve, if you hear me ;o)
'Hope they will react quickly !

Error message -ITunes has detected a problem with your audio config...HELP

error message - itunes has detected a problem with your audio configuration. audio/video playback may not operate properly...
ive gone through the itunes support steps such as reinstalling quicktime and itunes and nothing seems to work... itunes still open...but then nothing plays...please help me

I've cobbled together a few ideas courtesy of some posts made by the inimitable b noir concerning this particular problem .
First ...
... let's try swapping out your QuickTime, taking a few additional explicit precautions this time.
head into your Add/Remove programs. uninstall QuickTime.
Next, we’ll manually remove any leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
switch off antivirus and antispyware applications prior to the repair install.
go into Add/Remove and select itunes. click "Change" and then click "Repair".
if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?
Next ...
If you're still getting the message with a fresh quicktime in place, let's check to see if something is awry with your sound card.
Open your "Sounds and Audio Devices" control panel. Click the "Audio" tab. Is the correct default device showing up in the "Sound Playback" area?

This message recently popped up on my PC - "iTunes has detected a problem with your audio configuration. Audio/video playback may not operate properly." What does this mean and how to fix ??

Hi Everyone - recently this message popped up on my PC, when I was trying to import cd's into the iTunes library and then onto my iPod - "iTunes has detected a problem with your audio configuration. Audio/video playback may not operate properly." Can anyone tell me what this means and how to fix it ?? I am not fantastically PC savvy, so any information explained fully and all steps to follow to get my music playing again would be great !! Thanks, SC

Hi B, thanks so much for helping me troubleshoot !!
Ok, so when I went in to check the Audio tab of the Sounds and Audio Device Properties, I found the following:-
* Sound Playback Default Device = No Playback Devices.
* Sound Recording Default Device = No Playback Devices.
* MIDI Music Playback Default Device = No MIDI Playback Devices.
All text in this drop-down box were light grey, and therefore unable to be selected or altered.
I also tried playing a cd through Windows Media player, to see if I could get sound a different way. When I put the cd in and clicked on Play, the following message appeared, "Windows Media Player cannot play the file because there is a problem with your sound device. There may not be a sound device installed on your PC, it may be in use by another program, or it may not be functoning properly."
Any ideas ? I had sound previously, but then a work colleague re-built the PC to add more space to the hard drive, and since then, no sound. I know this may now not just be an iTunes issue, but I would appreciate any assistance you can offer.
Thanks again,
Shell

ITunes has detected a problem with your audio configuration...?!!?!?!?!?!

i get thins message when i open itunes...
"iTunes has detected a problem with your audio configuration. Audio/Video playback man not operate properly."
HOW DO I FIX IT??

Sounds like several people still have this problem... including me.
I upgraded to a new PC (still running XP , installed iTunes 8.0.2.20, reloaded my library...
And I got the "iTunes has detected a problem with your audio configuration" error.
I've deinstalled and reinstalled Quicktime to no avail.
iTunes seems to launch okay after the error.
But when I select a song and click "play", the song and time-counter show up correctly, but the song does not play... the "play head" stays stuck at 0:00.
I've imported new CDs, and the problem is the same with them.
This sounds like an unsolved problem... where do we go from here?

HT1199 cannot play songs, the following comes up - Itunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. Can anyone help. Cheers Wade Johnson

Cannot play songs, the following comes up - Itunes has detected a problem with your audio configuration.
Audio/Video playback may not operate properly.
Cheers
Wade Lawrence

Hello Wade,
This is typically indicative of an issue with the installation of QuickTime on your computer. The following article provides steps for reinstalling QuickTime to resolve the issue.
"iTunes cannot run because it has detected a problem with your audio configuration"
Resolution
QuickTime may need to be reinstalled. Follow the steps below to uninstall QuickTime and then download and install QuickTime using the QuickTime standalone Installer.
On the Start menu, click Control Panel.
Follow the steps appropriate for your Windows operating system below.
Windows XP and Windows 2000: Open the Add or Remove Programs control panel and selectQuickTime in the list of currently installed programs.
Windows Vista and Windows 7: Click Uninstall a program (or if using Windows Vista's Classic View of the Control Panel, click Programs and Features) and select QuickTime in the list of currently installed programs.
Click the Remove button (or Uninstall for Windows Vista and Windows 7) and follow the prompts to remove QuickTime from your computer.
Download QuickTime. Note: There are two options for downloading QuickTime, be sure to select the option that does not include iTunes.
During the download:
If you choose to run the installer, proceed to the next step.
If you choose to save the download, double click the QuickTimeInstaller file, then proceed to next step.
Follow the on-screen instructions to install QuickTime.
Reopen iTunes.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371
Cheers,
Allen

Problem with installed audio

Similar Messages

Maybe you are looking for