Problem with Installer and DVD drive

I am having problems with my dvd combo drive reading discs. It keeps spitting them out. More importantly, I am trying to load Adobe Illustrator CS2 and cannot get all the wat through the installation proccess. Is there a patch I am not aware of??

You could be looking at some kind of driver corruption issue (say if that sector on your hd had gone bad, or the file was dorked somehow). Have you done repaired permissions on the hd recently?
Do all types of DVDs fail -- music, movies, and apps? If some work and others do not, then it could be a problem with a particular app.
It never hurts to check the cables. Insufficient data or power can cause all kinds of problems.
HTH,
~FifthWheel

Similar Messages

Problem with installation and activation

Hi, I have a problem with the installation of Adobe Muse.
I had a free 30-days trial, when it was over I bought the product ($ 13 per month),
I installed the program again and I see the same window with the finished Trials
and it requires a serial number and does not allow to enter the program.
I installed the program on your PC wife without any problems, but I can not install it on a laptop.
I have a laptop with Windows 8 operating system.
What I've done:
1. Uninstalled the free program,
2. check the connection to the Internet,
3. has installed a new program from the official website adobe.com,
4. Remove the line for the activation of the hosts file and resave the file,
5. turned off the brandmower,
6. rebooted.
I can't get support for a 3 days, is it the most terrible support I've ever seen? I dunno
Please help me at [email protected]

I guess this stuff helps me
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
2014-08-07 20:07 GMT+07:00 Дмитрий Броский <[email protected]>:
thanx
>
2014-08-07 18:18 GMT+07:00 Prabhakar.Kumar <[email protected]>:
problem with installation and activation created by Prabhakar.Kumar
>> <https://forums.adobe.com/people/Prabhakar.Kumar> in *Help with using
>> Adobe Muse CC* - View the full discussion
>> <https://forums.adobe.com/message/6619532#6619532>
>>

Problems with the CD/DVD drive on my presario CQ50-108NR

Hey there.
I picked up the above listed laptop a short time ago, and I have discovered a problem that I can't seem to solve.
The CD/DVD drive reads and plays movies well enough, but it will not read CD's; any CD, be it data, music, images, whathaveyou. When I try to access the CD it keeps telling me that I need to insert a disk into the drive.
Again, it plays DVD movies well enough, not a hitch there. It just won't read CD's.
I'd love to assume that it's a driver issue (which would be the simplest and cheapest to fix), but I hate assuming anything where computers are concerned.
Thanks in advance for any and all help.

Is this a used Notebook?
Use device manager to uninstall the DVD drive, open DM, expand the DVD drive, then right clcik on the dvd drive and select "uninstall" Keep DM open, now right click on any device and select "scan for hardware changes" Windows will reinstall a clean copy of the driver. Reboot the notebook
If this does not fix it, the drive is bad.

I have FCP 6 and I've had nothing but problems with Compressor and DVD studio, I would just like to scrap 6 and move on to 10but use my same laptop, which is still running OSX 10.5.8, What do I need to do? to make this happen?

d

abelvideo wrote:
..... I finally did find involved clicking and dragging folders and files one by one to try it fix it from deep into utlity folders and such that I just gave up and been working with what I got, it really *****
If you have difficulties fixing problems with software that is acting up I would suggest that you do a clean install of your OS and the software. That is, after backing up your files, of course.
abelvideo wrote:
I am looking to go to a editing software that isn't Apple but will operate on a mac and has custum DVD capabilities included. But we'll see, best regards and thank you for your time.
Adobe CS is probably what you are looking for. But I'd go erase & install before throwing the towel.

Problems with External CD-DVD drive

I have an iMac G4 running OSX 10.4.11 and a SONY DRX-830UL-T external CD/DVD RW drive. I have been able to use this drive for reading CDs and DVDs and burning CDs in the past, but now I am unable to use the drive at all. The drive does turn on and off and I can hear the CD spin when I put it in there. Here is what I have done so far:
1. Checked Disk Utility. The drive does not show up there.
2. Checked System Profiler. The drive is connected by Firewire, but System Profiler only shows an unknown device under Firewire.
3. Reconnected drive using USB. Nothing changed.
4. Disconnected and Reconnected the drive.
5. Rebooted.
6. Rebooted and reset PRAM (CmdOption+PR).
7. Downloaded PatchBurn (which I had used before). Patchburn doesn't display the external drive.
At this point, I'm stuck. I don't think that the drive is bad, although I will check that out. I would appreciate any advice or help I could get on this. Thanks!

Hi, and a warm welcome to the forums!
I find Most Opticals to be far shorter lived than I would hope.
Does the FW port see other devices fine?
Do you know anybody with a Mac that you could try it on to eliminate any other cause?

Problems with Lenovo G570 dvd drive

I've got a Lenovo G570 using Windows 7. I've recently lost the ability to use my DVD drive. It appears in the Computer file but won't load anything. I've already checked and the software is supposedly up to date. I've even taken it out and re-seated it but nothing works. Any advice?

Hi IMFrellingWonko,
Welcome to Lenovo Community Forums!
   The Upper and lower filter does not fit he Symptom here but I suggest you give it a shot
            http://support.microsoft.com/kb/314060
check My Computer screen when you put in a CD, sometimes autoplay won't work but you have to double click the CD icon to open the content.
If you already tried other known good disc format (DVD, regular CD, Mp3,data,bootable CDs) and still won't recognize any of them
It's possible that the Drive itself is having issue,
   If you have other laptops that fits with the Drive size you can swap the Cd drive and check if it will work with other laptops. You can call Technical Support if the Laptop is still in Warranty.
Best Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Problems with Superdrive and DVD Player

The first problem is that for a long time, I haven't been able to eject disks by pushing the eject button (on the keyboard, in DVD player, etc) - I have to manually drag the DVD/CD on the desktop to the trash can/eject, or click the eject button in Finder. I know the button itself works fine, because I can eject disks in my Ubuntu Linux partition.
The second problem is that sometimes, while playing DVDs through DVD Player, the Player and/or the DVD itself in the drive freezes up. I can't quit the program, I can't eject the disk, I have to reboot to kill the program and eject the disk. This has happened on random DVDs (only, not any CDs), both that I own and that I received from NetFlix. The disks themselves are not bad, as they will run fine in VLC.
Any help with either of these problems? For what it's worth, the problems both started well before I partitioned the hard drive to install Linux.

Nope, didn't have a clue about that. Had to get my hard drive replaced, but everything's working fine now and holding the eject button down for a couple of seconds works.
Thanks!

Problem with k3b and DVD Plextor PX-750A doesnt burn DVDs

hello.
i m having problem to burn any kind of DVD format with my dvd recorder Plextor PX-750A. the software that i'm using is K3B.
the first debug that i get is that:
System
K3b Version: 1.0.1
KDE Version: 3.5.7
QT Version: 3.3.8
Kernel: 2.6.21-ARCH
Devices
PLEXTOR DVDR PX-750A 1.02 (/dev/sr0, ) [CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, SAO/R96P, SAO/R96R, Restricted Overwrite, Layer Jump]
ASUS DVD-E616A 1.05 (/dev/sr1, ) [CD-ROM, DVD-ROM] [DVD-ROM, CD-ROM] [None]
Burned media
DVD+R
Used versions
growisofs: 7.0
growisofs
Executing 'builtin_dd if=/dev/fd/0 of=/dev/sr0 obs=32k seek=0'
:-[ MODE SENSE#2A failed with SK=4h/ASC=08h/ACQ=03h]: Input/output error
growisofs command:
/usr/bin/growisofs -Z /dev/sr0=/dev/fd/0 -use-the-force-luke=notray -use-the-force-luke=tty -use-the-force-luke=tracksize:1720400 -dvd-compat -speed=8 -use-the-force-luke=bufsize:32m
then i did an upgrade to the firmware of Plextor from 1.02 to 1.03
but still doesnt burn. the debug from the second is this:
System
K3b Version: 1.0.1
KDE Version: 3.5.7
QT Version: 3.3.8
Kernel: 2.6.21-ARCH
Devices
PLEXTOR DVDR PX-750A 1.03 (/dev/sr0, ) [CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, SAO/R96P, SAO/R96R, Restricted Overwrite, Layer Jump]
ASUS DVD-E616A 1.05 (/dev/sr1, ) [CD-ROM, DVD-ROM] [DVD-ROM, CD-ROM] [None]
Burned media
DVD+R
K3bIsoImager
mkisofs print size result: 2148367 (4399855616 bytes)
Pipe throughput: 33655808 bytes read, 33654784 bytes written.
Used versions
mkisofs: 1.1.6
growisofs: 7.0
growisofs
Executing 'builtin_dd if=/dev/fd/0 of=/dev/sr0 obs=32k seek=0'
:-[ MODE SENSE#2A failed with SK=4h/ASC=08h/ACQ=03h]: Input/output error
growisofs command:
/usr/bin/growisofs -Z /dev/sr0=/dev/fd/0 -use-the-force-luke=notray -use-the-force-luke=tty -use-the-force-luke=tracksize:2148367 -dvd-compat -speed=16 -use-the-force-luke=bufsize:32m
mkisofs
2148367
I: -input-charset not specified, using utf-8 (detected in locale settings)
0.02% done, estimate finish Mon Jul 9 10:53:07 2007
0.05% done, estimate finish Mon Jul 9 10:53:07 2007
0.07% done, estimate finish Mon Jul 9 10:53:07 2007
0.09% done, estimate finish Mon Jul 9 10:53:07 2007
0.12% done, estimate finish Mon Jul 9 10:53:07 2007
0.14% done, estimate finish Mon Jul 9 10:53:07 2007
0.16% done, estimate finish Mon Jul 9 10:53:07 2007
0.19% done, estimate finish Mon Jul 9 10:53:07 2007
0.21% done, estimate finish Mon Jul 9 10:53:07 2007
0.23% done, estimate finish Mon Jul 9 10:53:07 2007
0.26% done, estimate finish Mon Jul 9 10:53:07 2007
0.28% done, estimate finish Mon Jul 9 10:53:07 2007
0.30% done, estimate finish Mon Jul 9 10:53:07 2007
0.33% done, estimate finish Mon Jul 9 10:53:07 2007
0.35% done, estimate finish Mon Jul 9 10:57:53 2007
0.37% done, estimate finish Mon Jul 9 10:57:35 2007
0.40% done, estimate finish Mon Jul 9 10:57:19 2007
0.42% done, estimate finish Mon Jul 9 10:57:05 2007
0.44% done, estimate finish Mon Jul 9 10:56:53 2007
0.47% done, estimate finish Mon Jul 9 10:56:41 2007
0.49% done, estimate finish Mon Jul 9 10:56:31 2007
0.51% done, estimate finish Mon Jul 9 10:56:22 2007
0.54% done, estimate finish Mon Jul 9 10:56:13 2007
0.56% done, estimate finish Mon Jul 9 10:56:06 2007
0.58% done, estimate finish Mon Jul 9 10:55:58 2007
0.61% done, estimate finish Mon Jul 9 10:55:52 2007
0.63% done, estimate finish Mon Jul 9 10:55:46 2007
0.65% done, estimate finish Mon Jul 9 10:55:40 2007
0.68% done, estimate finish Mon Jul 9 10:55:35 2007
0.70% done, estimate finish Mon Jul 9 10:55:30 2007
0.72% done, estimate finish Mon Jul 9 10:55:25 2007
0.74% done, estimate finish Mon Jul 9 10:55:21 2007
mkisofs calculate size command:
/usr/bin/genisoimage -gui -graft-points -print-size -quiet -volid Heroes-DVD01 -volset -appid K3B THE CD KREATOR (C) 1998-2006 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-ironwiller/k3bhZVOPb.tmp -rational-rock -hide-list /tmp/kde-ironwiller/k3bjKitub.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-ironwiller/k3blTlUib.tmp -no-cache-inodes -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-ironwiller/k3bgTeAJb.tmp
mkisofs command:
/usr/bin/genisoimage -gui -graft-points -volid Heroes-DVD01 -volset -appid K3B THE CD KREATOR (C) 1998-2006 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-ironwiller/k3bNBKhLa.tmp -rational-rock -hide-list /tmp/kde-ironwiller/k3bJnRJha.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-ironwiller/k3bXxkBVa.tmp -no-cache-inodes -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-ironwiller/k3bnNQuIa.tmp
what else should i do for my dvd recorder to work???
ty from the start for your help.
Last edited by ironwiller (2007-07-12 09:04:39)

bt wrote:This is not an arch package.. no makepkg, no pacman -U. Just untar the package and follow instructions. Sorry, I've been playing with this stuff so long ( I started with RedHat 5.2), that I have forgotton how to explain the steps. But, if you untar the package (I do it in its own directory} You should be able to move the binary to a location of you choice. I think you need someone more experienced than me to describe the steps.
ok and ty very much for help so far
ps: did you find any solution with using k3b?
i like it more in a graphical enviroment.

Problem with KT4 and 200Gb Drive or is it?

:(
Help!
Hi, I just got this board KT4 Ultra and am having a problem, not sure what it's related to though
The MB picks up the new drive I bought (Maxtor IDE ATA-133 200Gb 7200RPM 8Mb Cache DiamondMax Plus9) fine no problem, but when I come to install WinXP it constantly tells me that it's a 130Gb drive?!?!?!
Anyone, any ideas?
Thanx
Vev

Here is something similar to the issue you are having.
I seen it on the Maxtor site.
http://maxtor.custhelp.com/cgi-bin/maxtor.cfg/php/enduser/std_adp.php?p_sid=g5PzHxCg&p_lva=960&p_faqid=960&p_created=1016214655&p_sp=cF9zcmNoPTEmcF9ncmlkc29ydD0mcF9yb3dfY250PTc2JnBfc2VhcmNoX3RleHQ9JnBfc2VhcmNoX3R5cGU9MyZwX3Byb2RfbHZsMT0zMyZwX3Byb2RfbHZsMj00NCZwX2NhdF9sdmwxPTImcF9jYXRfbHZsMj1_YW55fiZwX3BhZ2U9MQ**&p_li=

Problem with iTunes and external drive

I moved my files to an external hard drive months ago but apparently forgot to uncheck the auto synch button. It seems that I just managed to copy them all back to my computer hard drive where I now only have 6gb. Since I originally moved the files I have put some movies and a little music on the computer and have iPad files in the mix. How to I get it all synched so that I know I have everything and then delete it from my hard drive?
I then would like to add some new CDs to the IPod, but do not want them stored on my computer drive, just external drive.
Please feel free to treat me like I am clueless because I am. Once I burned my entire Cd collection and moved it I have not done anything else with iTunes except buy the occasional app.
Thanks in advance for the help.
I was trying to follow directions on another post which did not seem to fit so I began trying random things. Very bad idea!
Cyndi

Nevermind. I figured it out.

Problem with iTunes and Hard Drive

I'm not sure if anyone else is having this problem but I haven't had it up until this morning. I was putting songs onto my iPod (It's set to manual manage) and I would drop and drag and go look for a new song but when I brought the folder up it would tell me that the previous songs file destination couldn't be found, and it was deleted from my Music Folder however when I went to click on the song to get it's information the file destination would say it was in it's original spot I'm not sure what to do since I've never had this problem before and I don't think it's my Ipod I think it's something either with iTunes or my Computer and I can' figure out which.
Any more questions let me know and any help would be great!
Thanks!!
Erin
Message was edited by: Ed Dicesare

You might find this article useful: iLounge - Managing your iTunes Library on an External Hard Drive

Weird problem with A300 and external drive

Info about my comp: A300-29U model Windows 7 ATI Edition (32) SATA Unknown External Drive ----- Ok, so yesterday I plugged in my external drive as usual to check some music. Everything was ok and I went to sleep. This morning when I woke up and tried that again the computer doesn't see external drive. You hear that sound when you turn it on/off, but it doesn't show or even do auto-run of my external drive. I changed 3 new USB cables and plugged in into 3 differen USB Hubs and everything is the same... I checked in Device Manager, it says that device is working fine, but I have 2 Base Missing Driver errors. I suppose that's for this external drive, but I don't have a clue how to fix it. I downloaded new chipset/bios drivers and have a fresh Avira installed. Any tips?

If you have a two devices banged out, deleted them and restart. It should auto detect the devices and load the driver. I had a problem like this. That worked for me.
What kind of hard drive is it.

Problems with Installation and then with the direct links...

Well.. the problem is that I tried to install flash player, and in the middle of the Download it gets to 47% and says: "The download time has expired" and closes the download and open me in the web explorer to a troubleshooting page... I go to the error selecting the issue of the download and the solution is that I have to download the Flash Player from another page with direct links of the Player and there's the thing... The links are not working...
The page says "The connection was reset". I hope that you can help me with this problem.

What operating system and browser would you like to install Flash on?

Multiple problems with installation and stop frame animation

I have just spent 24 hours of increasing frustration trying to install and use On Location. I recently bought a Matrox RTX 2 Premiere CS3 desktop edit suite. On Location recognises any camera I attach via the drop down menu but will never display a video image or activate any capture commands. An afternoon with my dealer's tech support did not find a solution.
Next I tried installing it on my Vaio laptop. It would not display the menu bar, but components would display, my camera was recognised, and I managed to capture avi type 2 files in mpeg at 1080i PAL. These will play back on the laptop in media player but crash Premiere when I import them. Matrox say these files should be supported. After these tests, OnLocation began to crash the Vaio as soon as I plugged in a camera. The Vaio presents a black screen and the OS freezes completely, requiring a hard boot for recovery.
I have uninstalled it and attempted to install it in a brand new Vista HP laptop. The install crashes during activation. After 3 uninstall/reinstall attempts I gave up. I will now start again with a fresh install on the Vaio. Will report back if I make any progress today. Any suggestions meanwhile would be much appreciated.
The holy grail, by any means possible, is to capture stop frame animations in HDV 1080i PAL format. I need one laptop to work for capture, then to transfer the animation files to the desktop for editing.
many thanks

Hi Martin, Sorry to hear you're having such problems. I have no experience with Matrox system, so I cannot speak directly to compatibility with OnLocation CS3. For both computers, I'd be interested in seeing the system specs. If you're willing, how about sending the dxdiag file for each to me at [email protected] I'll see if anything jumps out at me. One detail that does not compute is your reference to recoring "avi type 2 files in mpeg at 1080i PAL." HDV content cannot be recorded to the AVI format. The only options are MPG and M2T. If the clips are indeed AVIs, then the camera must have been set to the DV mode. As for OnLocation crashing the computer so badly that a hard reboot is necessary, that generally points to some deeper problem in the computer's drivers or BIOS. When it gets into that state, have you tried bringing up Windows Task Manager (CTRL+SHIFT+ESCAPE) and killing the OnLocation process? I'm wondering if the system isn't totally locked up but appears to be so because on this low res display, OnLocation has basically taken over the whole display, so when it fails to launch, you can't see any other Windows controls. If this is the case, then deleting the AppProps file here: C:\Documents and Settings\<username>\Local Settings\Application Data\Adobe\OnLocation CS3. btw, the reason you see no menu bar is that the laptop's display is at the minimum for OnLocation CS3 (1024x768, if memory serves). The menu is shown only at higher display resoltions.

Mountain Lion fails to install saying it cannot create the recovery; I had a similar problem with Lion and the Apple Store that helped me resolve it gave me an installable version of Mountain Lion on a flash drive for my inconvenience....

Mountain Lion fails to install saying it cannot create the recovery; I had a similar problem with Lion and the Apple Store that helped me resolve it gave me an installable version of Mountain Lion on a flash drive for my inconvenience....is there some trick I am missing or do I need to make an appointment with a genius...

I have the MacIntosh volume and the Boot Camp partition only. I know that when I installed Lion, I had to go through a whole back-up and recovery of Windows and then re-format the drive.
The tech at the Apple Store had a previous life as a MSCE and was very helpful. I believe he even said that I should not have htis problem with Mountain Lion which is why they gave me the flash with it onboard. I was in the process of starting a new job when I went to Lion, so I have waited to do this next and probably last upgrade to this old MBP since I doubt Apple will support this MBP in Maverick.
I do not have another installation, so that is not an option. I will try to create an external, I have plenty of hard drives around and see if I can get it done that way. It might take me a week or two to get back to it, but I will comment back upon completion of that effort. Thanks for your help....Dave Iverson

Problem with Installer and DVD drive

Similar Messages

Maybe you are looking for