Problem with installing and using elements13
First media is up, then it says please wait, then Elements 13 organizer has stopped working. Then my windows is collecting info and will notify me when a solution is available and it never does!
Then if it is running, I cannot get editor to load and work. It asks again for my id and password, then nothing happens!
Please somebody help!
Thanks, Rich
You are not alone. Im also having the same issue because we do alot of install and uninstall apps. This is the bad point of symbian. But I tired to install the latest FP2 it will be slightly abit smoother now. So you have the latest version now but did you tired to restore any backup yet? It might be the setting on when you restore that affect it. The feezing should be shorten on FP2 but it will still remain there depending on the type of apps from what I experience.
I hope they will provide multiple function to uninstall apps since it will go through a long process to uninstall apps 1 by 1.
Reason is because some apps will go through process like preparing install, process install, finalising install which take away your control for that few seconds or a minute instead runnning in background mode. Its not convenient to uninstall more apps.
Similar Messages
-
Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?
Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?
I have been trying to install Photoshop CS6 & CC and Acrobat Pro XI on my Mac Pro (late 2013). I keep getting a 'configuration' error message and wondered if the problem was wide spread.
TIA,
JerryThanks, Martin.
Good to hear someone has had success. The lack of it here is frustrating and depressing.
Thanks again,
Jerry -
Severe problem with installing and starting Audio-DVD Pla
Hi,
after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
Any ideas?
Best regards and thank in advance,
PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PMHi,
after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
Any ideas?
Best regards and thank in advance,
PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM -
Problem with installing and running some applications or drivers
When installing and installing some items, towards the end of the installation I get this message:
/System/Library/Extensions/comcy_driver_USBDevice.kext
*was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update*
The end result is that some things do not seem to work properly, such as my HP printer. Would anybody have any ideas on how to fix this problem?Thank you for your response. Originally, I had a problem with Airport and ended up reinstalling Snow Leopard. Since then, when downloading upgrades etc, such as HP printer drivers, iTunes etc., towards the end of the download when its running the script, I get this message: /System/Library/Extensions/comcy_driver_USBDevice.kext
+was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update+
Sometimes, the download hangs and is unable to complete. The main problem I've encountered so far with an application is when I use the printer to scan an image via Preview, it's blank: there's nothing there. -
Problem with installing and uninstalling applicati...
hi all,
I have a problem with installing or uninstalling apps on 808. When i try to install an application through Nokia suite or when trying to run the application file from the phone's memory the screen freezes and becomes unresponsive but the 3 phone buttons work just fine. I have to shut down the phone and the screen becomes responsive again. Anything available to help me wiith this situations as I cannot use any of the apps I have. Any help much appreciated.
Regards
AlexYou are not alone. Im also having the same issue because we do alot of install and uninstall apps. This is the bad point of symbian. But I tired to install the latest FP2 it will be slightly abit smoother now. So you have the latest version now but did you tired to restore any backup yet? It might be the setting on when you restore that affect it. The feezing should be shorten on FP2 but it will still remain there depending on the type of apps from what I experience.
I hope they will provide multiple function to uninstall apps since it will go through a long process to uninstall apps 1 by 1.
Reason is because some apps will go through process like preparing install, process install, finalising install which take away your control for that few seconds or a minute instead runnning in background mode. Its not convenient to uninstall more apps. -
How to fix problem with installed and working add-ons disappearing after update to 20.0.1?
I updated to version 20.0.1 of Firefox the other day. I had the theme Qute 3++ 1.19 installed and it took 3 restarts of the browser before it kicked in and worked again, for some reason.
Then I noticed that my MillBar Community toolbar 3.18.0.7 had disappeared, which I use for the feature of collecting my email accounts to get fast notifications about new emails. Also my Adblock Plus 2.2.3 seems to not be working because all of a sudden I see ads everywhere and I also discovered a bunch of pop-ups from nowhere. I used these add-ons for such a long time that I was shocked.
When i went to type a message to a friend, I also noticed that my american-english dictionary/spellchecker was not working.
The first thing I checked was that none of these add-ons was inactivated or said to need updates. The dictionary had disappeared, so i re-installed that. I also reinstalled Adblock Plus. Still it doesn't work.
When i entered the email information into the toolbar options, it collects my emails for a while, but suddenly it stops and the information is not there anymore. If I restart the browser it also disappears.
Same thing with the dictionary. it works for a while, and then suddenly it's like it's disabled.
And the add-ons are still in what seems like working conditions in my lists. No errors that I can see, no updates available.
I'm really at a loss as to what to do, I've never had problems like this before that couldn't be solved with an update of the add-on. So I'd be very grateful for help with this and hope that I have provided enough information.this help is not useful.
Since the new firefox version 20.0.1, '''no more of my add-ons work''' (except firebug ). They are installed '''but not visible '''(no toolbar, no menus) !!! same for the new add - ons that I installed. I tried everything: to reinstall add-on, to reinstall firefox.
this new version of firefox is really horrible, '''thank you for making a corrective because I cannot work any more with''' -
Problem with constructors and using public classes
Hi, I'm totally new to Java and I'm having a lot of problems with my program :(
I have to create constructor which creates bool's array of adequate size to create a sieve of Eratosthenes (for 2 ->n).
Then it has to create public method boolean prime(m) which returs true if the given number is prime and false if it's not prime.
And then I have to create class with main function which chooses from the given arguments the maximum and creates for it the sieve
(using the class which was created before) and returns if the arguments are prime or not.
This is what I've written but of course it's messy and it doesn't work. Can anyone help with that?
//part with a constructor
public class ESieve {
ESieve(int n) {
boolean[] isPrime = new boolean[n+1];
for (int i=2; i<=n; i++)
isPrime=true;
for(int i=2;i*i<n;i++){
if(isPrime[i]){
for(int j=i;i*j<=n;j++){
isPrime[i*j]=false;}}}
public static boolean Prime(int m)
for(int i=0; i<=m; i++)
if (isPrime[i]<2) return false;
try
m=Integer.parseInt(args[i]);
catch (NumberFormatException ex)
System.out.println(args[i] + " is not an integer");
continue;
if (isPrime[i]=true)
System.out.println (isPrime[i] + " is prime");
else
System.out.println (isPrime[i] + " is not prime");
//main
public class ESieveTest{
public static void main (String args[])
public static int max(int[] args) {
int maximum = args[0];
for (int i=1; i<args.length; i++) {
if (args[i] > maximum) {
maximum = args[i];
return maximum;
new ESieve(maximum);
for(int i=0; i<args.length; i++)
Prime(i);}I've made changes and now my code looks like this:
public class ESieve {
ESieve(int n) {
sieve(n);
public static boolean sieve(int n)
boolean[] s = new boolean[n+1];
for (int i=2; i<=n; i++)
s=true;
for(int i=2;i*i<n;i++){
if(s[i]){
for(int j=i;i*j<=n;j++){
s[i*j]=false;}}}
return s[n];}
public static boolean prime(int m)
if (m<2) return false;
boolean x = sieve(m);
if (x=true)
System.out.println (m + " is prime");
else
System.out.println (m + " is not prime");
return x;}
//main
public class ESieveTest{
public static int max(int[] args) {
int maximum = args[0];
for (int i=1; i<args.length; i++) {
if (args[i] > maximum) {
maximum = args[i];
return maximum;
public static void main (String[] args)
int n; int i, j;
for(i=0;i<=args.length;i++)
n=Integer.parseInt(args[i]);
int maximum=max(args[]);
ESieve S = new ESieve(maximum);
for(i=0; i<args.length; i++)
S.prime(i);}
It shows an error for main:
{quote} ESieveTest.java:21: '.class' expected
int maximum=max(args[]); {quote}
Any suggestions how to fix it? -
My name is John Grace. I have been an MS customer for years. Never before in my experiences with MS up to this point have I experienced such POOR product support. Your pre-sales agents have no knowledge to offer with pre-sales config or
install issues, your support personnel are trained not to provide any reasonable help with even minor questions and concerns helping to make sure your trial experiences are progress and successful, your product support Mgrs show lack luster concern if you
need some technical direction. The first thing that is asked is do you have a support contract or credit card for this session. Now, if I am evaluating products a support contract should not be necessary as you should want customers to have good
outcomes with their trials.
I have been trying to configure test servers with the above mentioned products for the past 6 days with no success. Each install is different and the configurations some times work and some times they don't. I reach out for help in your forums,
etc., and am still at square one.
This frustrating and breeds a lack of confidence in your organization. When Bill Gates was in charge I experienced none of the nonsense today.
I have identified bugs and issues to your product teams and they gladly accept these. But when help is needed...it is send us an email type attitude. I have 8 8 core servers running windows 2008 server R2 slated for upgrading to windows
2012 server, and more after that. If I don't get the trial software to work, the upgrades are terminated.
Please give me some help or you will loose me as a customer, and customers that I installed systems for.
John Grace
(937) 286-4912
John GraceHi again Alan,
Thanks for the reply, i have however not been able to find any viable hotfix from MS addressing this problem so far. I only found the QFE for 2008 R2, but this is not applicable in my enviroment.
Sadly, we are experiencing the same issue with the 2008 R2 server as print server now. So the problem seems to be with the 2012 R2 RDS servers.
We have been able to narrow it down to a probable cause though:
The issue seems to be the cause of Client Side Rendering, even if it is disabled on the shared printers. We are seeing heavy bloating in the registry:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Print\Providers\Client Side Rendering Print Provider
The same printers are listed multiple times in subkeys for each user-SID.
The print server is listed twice under the 'Servers' key, once with just the hostname and once with the fqdn. Benath these two many of the printers are also listed multiple times.
Consequences are that printers are showing as clones for the users and they cannot set them as default printer. If they remove the printer manually, it just reappears. Setting a delete on the shared printer through GPP does not work either.
The only manual workaround we have found working is to delete the entire "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Print\Providers\Client Side Rendering Print Provider" key on the
terminal server in question, and then restart the print spooler. This fixes the problem for the user, but once they start logging off and on again, the bloating of the registry is at it once more - and the problems following with it.
In an enviroment with 70+ printers and 15 RDS servers, spread on 3 different farms, it's not a good solution though.
Any ideas? -
Anybody has any problems with installing and printing with canon lbp6650dn?
hi,
i bought a new i-sensys lbp6650dn and i am trying to make it work with my macbook 10.5.8. the installation cd that comes with it does not work with mac. i downloaded the latest drivers from canon's website, and could add the printer to my list.
computer's connected to the printer with USB. both the computer and the printer show no error, but whenever i try to print a document it starts printing jumbld letters and numbers that look like programme codes. moreover, it prints around 20 pages for a 1-page document. does anybody know what the problem might be? i am not sure whether there is something wrong with the computer's settings or the printer's. it's the first time installing a printer is giving me such a hard time. any help would be much appreciated.
thanks!Try reseating your memory. Sometimes this occurs when the RAM is not seated all the way in the slot.
You could also boot from your 1st install disk while holding down the D key. Then run the diagnostics on your MacBook.
Message was edited by: First Magus -
Problems with installing and activating and older version of Creative Suites
Hi. I'm using a MacBrook Pro with Max OS 10.6.8 and am trying to install an old version of Adobe Creative Suite (2 Premium) that I have. I got through the whole installation process yesterday, but was unable to activate it. I had to quit without going further. This morning, I read through the info that comes with the program and it looked like I would need to reinstall everything, because I stopped before activation. When I inserted the 1st disk, it did not load right and got stuck. I had to forcibly eject it. However, Disks 1-4 are still loaded on my computer. I have 3 questions:
Can the older programs no longer get activated?
If they CAN, how do I get from the info loaded under my Applications folder to the activation?
Alternatively, since I stopped before activation and hit "quit" rather than "cancel," do I have to start the whole process all over again from the beginning?
Thanks for any help you can give me!Put your CS2 disks away (since they can no longer be used) and follow these instructions from Adobe
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3 -
Having a problem with threads and using locks
I was hoping someone could give me some hits on getting my code to run properly. The problem I am having is I think my locks and unlocks are not working properly. Plus, for some reason I always get the same output, which is:
Withdrawal Threads Deposit Threads Balance
Thread 2 attempts $29 Withdrawal - Blocked - Insufficient Funds
Thread 4 attempts $45 Withdrawal - Blocked - Insufficient Funds
Thread 6 attempts $34 Withdrawal - Blocked - Insufficient Funds
Thread 7 attempts $40 Withdrawal - Blocked - Insufficient Funds
Thread 1 deposits $187 $187
Thread 3 deposits $169 $356
Thread 5 deposits $61 $417
Press any key to continue...If someone can see the error I made and doesn't mind explaining it to me, so I can learn from it, I would appreciate that very much.
/************Assign2_Main.java************/
import java.util.concurrent.*;
public class Assign2_Main
{//start Assign2_Main
public static void main(String[] args)
{//start main
// create ExecutorService to manage threads
ExecutorService threadExecutor = Executors.newCachedThreadPool();
Account account = new SynchronizedThreads();
Deposit deposit1 = new Deposit(account, "Thread 1");
Deposit deposit2 = new Deposit(account, "Thread 3");
Deposit deposit3 = new Deposit(account, "Thread 5");
Withdrawal withdrawal1 = new Withdrawal(account, "Thread 2");
Withdrawal withdrawal2 = new Withdrawal(account, "Thread 4");
Withdrawal withdrawal3 = new Withdrawal(account, "Thread 6");
Withdrawal withdrawal4 = new Withdrawal(account, "Thread 7");
System.out.println("Withdrawal Threads\t\tDeposit Threads\t\t\tBalance");
System.out.println("------------------\t\t---------------\t\t\t-------\n");
try
threadExecutor.execute(withdrawal1);
threadExecutor.execute(deposit1);
threadExecutor.execute(withdrawal2);
threadExecutor.execute(deposit2);
threadExecutor.execute(withdrawal3);
threadExecutor.execute(deposit3);
threadExecutor.execute(withdrawal4);
catch ( Exception e )
e.printStackTrace();
//shutdown worker threads
threadExecutor.shutdown();
}//end main
}//end Assign2_Main/******************Withdrawal.java****************************/
public class Withdrawal implements Runnable
{//start class Withdrawal
*constructor
public Withdrawal(Account money, String n)
account = money;
name = n;
public void run()
{//start ruin
int newNum = 0;
newNum = account.getBalance(name);
Thread.yield();
}//end run
private Account account;
private String name;
}//end class Withdrawal/*******************Deposit.java***************/
import java.util.Random;
public class Deposit implements Runnable
{//start class Deposit
*constructor
public Deposit(Account money, String n)
account = money;
name = n;
public void run()
{//start run
try
Thread.sleep(100);
account.setBalance(random.nextInt(200), name);
}// end try
catch (InterruptedException e)
e.printStackTrace();
}//end run
private Account account;
private Random random = new Random();
private String name;
}//end class Deposit/********************Account.java*****************/
*Account interface specifies methods called by Producer and Consumer.
public interface Account
//place sum into Account
public void setBalance(int sum, String name);
//return value of Account
public int getBalance(String name);
} /**************SynchronizedThreads.java****************/
import java.util.concurrent.locks.*;
import java.util.Random;
public class SynchronizedThreads implements Account
{//start SynchronizedThreads
*place money into buffer
public void setBalance(int amount, String name)
{//start setBalance
// lock object
myLock.lock();
sum += amount;
System.out.println("\t\t\t\t" + name + " deposits $" + amount +"\t\t$"+ sum+"\n");
//threads are singnaled to wakeup
MakeWD.signalAll();
// unlock object
myLock.unlock();
}//end setBalance
*gets the balance from buffer
public int getBalance(String name)
{//start getBalance
int NewSum = random.nextInt(50);
//lock object
myLock.lock();
try
if(sum > NewSum)
//takes NewSum away from the account
sum -= NewSum;
System.out.println(name + " withdraws $" + NewSum +"\t\t\t\t\t\t$"+ sum+"\n");
else
System.out.println(name + " attempts $" + NewSum + " Withdrawal - Blocked - Insufficient Funds\n");
//not enough funds so thread waits
MakeWD.await();
//threads are singnaled to wakeup
MakeD.signalAll();
}//end try
catch (InterruptedException e)
e.printStackTrace();
finally
//unlock object
myLock.unlock();
return NewSum;
}//end getBalance
private Random random = new Random();
private Lock myLock = new ReentrantLock();
private Condition MakeD = myLock.newCondition();
private Condition MakeWD = myLock.newCondition();
private int sum = 0;
}//end SynchronizedThreadsYou can also try to provide a greater Priority to your player thread so that it gains the CPU time when ever it needs it and don't harm the playback.
However a loop in a Thread and that to an infinite loop is one kind of very bad programming, 'cuz the loop eats up most of your CPU time which in turn adds up more delays of the execution of other tasks (just as in your case it is the playback). By witting codes bit efficiently and planning out the architectural execution flow of the app before start writing the code helps solve these kind of issues.
You can go through [this simple tutorial|http://oreilly.com/catalog/expjava/excerpt/index.html] about Basics of Java and Threads to know more about threads.
Regds,
SD
N.B. And yes there are more articles and tutorials available but much of them targets the Java SE / EE, but if you want to read them here is [another great one straight from SUN|http://java.sun.com/docs/books/tutorial/essential/concurrency/index.html] .
Edited by: find_suvro@SDN on 7 Nov, 2008 12:00 PM -
Problems with downloading and using facebook and m...
In the previous version of nokia asha 200 I can download and install facebook app directly from official site.
After updating to 12.04 , I can't download from official site.
It shows 'Invalid application to update'.
And I have tata docomo as carrier.
I can not even reach to login portal in this app.
other carriers reaches.
Please solve this I am tired of this.Hi,
Welcome to the forum!
Just to clarify, are you able to download and install the Facebook application directly from the phone's browser or from the Nokia Store? What do you mean you 'cannot reach to login portal in this application but other carriers reach'? Is the updating of phone's software successful? Did you encounter any issue when you update it?
If you are referring to the Nokia Store, you may try to restore the phone's setting to their original values. This will not affect your documents or files saved on the phone. This can be done by going to Settings > Restore factory sett. > Settings only > Enter the security code. The default code is 12345 unless changed. Another option is to reinstall the phone's software. This can be done by going to Settings > Device > Device updates.
Let us know the outcome. -
Help!! How to install and use Sun ONE Directory Server Resource Kit 5.2
Hi ! Friend:
I have some problem on install and use Sun ONE Directory Server Resource Kit 5.2, when I execute "java DSRK", afterwards something like this : com.iplanet.install.until.wbResource::gerstring:resource bundle"locale.resources.S1DSRKResource" not found appeared in the window ,that's why?
Meanwhile ,can you give some data about it on how to use it ?
Thank you !You should be aware of the following characteristics of your directory when using this tool:
Size and number of entries.
Directory structure and access permissions.
Virtual attributes, class of service, and indexing.
Usage, types of access, and access patterns.
Post your error messages completely.
Thanks
--Britto -
Problem with OCI call and how to install and use 'DEBUG_EXTPROC' on Linux
Hi,
Can any one let me know how I can install and use this debug_extproc package. I have installed oracle XE server on Linux machine(32-bit).
When I use : DEBUG_EXTPROC.STARTUP_EXTPROC_AGENT' ... i get an error saying that : it is not declared.
I tried looking in all the directories but did not find the dbgextp.sql(which is required in order to install that package).And tried searching on google but could not get any relevant information.
Also I am newbie to OCI call interface and also to C programming too: I have coded a external procedure or custom user aggregate in C. But since I was using C++ : 'set' STL. I have compiled my program using g++ instead of gcc and I have correspondingly modified the make file in public/demo directory.
So, is it fine to do it that way: using OCI (instead of OCCI(C++)) but again compiling the pgm as a regular C++ using g++ instead of gcc.(But rest of the pgm including printf statements : everything is in C).
Also I have created the library from my : custagg.so library:
SQL> create or replace library custagg is '$ORACLE_HOME/lib/custagg.so'
But my aggregate function implemented as external C function using OCI is either not recognised or else : if recognized then there is some error because of which i am getting the following errors : ORA-06522
SQL> select MinDistance(TT) from egg1;
select MinDistance(TT) from egg1
ERROR at line 1:
ORA-06520: PL/SQL: Error loading external library
ORA-06522: /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/lib/custagg.so:
cannot dynamically load executable
Please kindly answers my queries and trying to resolve this for almost 4 days now and could not find any clue on how to get this done.
Thanks,
-NN#/bin/make
# Make file for OCI,OCCI and ODBC demos
# Usage :
# For compiling & linking the cdemo81.c file
# make -f demo_xe.mk buildoci CDEMOEXE=cdemo81 CDEMOOBJS=cdemo81.o
.SUFFIXES: .o .c .cpp
ICINCHOME=$(ORACLE_HOME)/rdbms/public/
ICLIBHOME=$(ORACLE_HOME)/lib
ICLIBPATH=-L$(ICLIBHOME)
THREADLIBS=-lthread
CCLIB=$(ICLIBPATH) -lclntsh $(THREADLIBS)
OCCILIB=$(ICLIBPATH) -locci -lclntsh $(THREADLIBS)
CCINCLUDES = -I$(ICINCHOME)
CCFLAGS=$(CCINCLUDES) -D_REENTRANT -g -xs
LDFLAGS=
SO_EXT=.so
EXTLDFLAGS=$(LDFLAGS) -shared
REMOVE=rm -rf
MKLINK=ln
MAKE=make
MAKEFILE=demo_xe.mk
CDEMOEXE=custagg.so
CDEMOOBJS=custagg.o
OCCIDEMO=occidml
OCCIOBJDEMO=occiobj
OTT=$(ORACLE_HOME)/bin/ott
OCCIOTTUSR=hr
OCCIOTTPWD=hr
ODBCDEMOEXE=odbcdemo
ODBCDEMOOBJS=odbcdemo.o
AQDEMOEXE=ociaqdemo00
AQDEMOOBJS=ociaqdemo00.o
EXTDEMO=extdemo2.so
CC=/usr/bin/g++
echo "LIBCLNT value is :" $(LIBCLNT)
echo "CC value is :" $(CC)
.c.o:
g++ -c -I$(ICINCHOME) $(CCFLAGS) $<
all: clean buildoci
echo "LIBCLNT value is :" $(LIBCLNT)
buildoci: $(LIBCLNT) $(CDEMOOBJS)
g++ -o $(CDEMOEXE) $(LDFLAGS) $(CDEMOOBJS) $(CCLIB)
echo "CC value is :" $(CC)
echo "LIBCLNT value is :" $(LIBCLNT)
clean:
$(REMOVE) $(CDEMOOBJS) $(CDEMOEXE)
# This port-specific file is currently empty on Solaris. Product
# lines may use this file to override compiler definitions and
# flags used in occi.mk.
# Linux compiler definitions
CC=/usr/bin/gcc
cc=/usr/bin/gcc
CCFLAGS=$(CCINCLUDES) -DLINUX -D_GNU_SOURCE -D_REENTRANT -g
LDFLAGS=-g
# This macro CCINCLUDES has to be redefined on Linux because of
# the existence of the 'new' directory in t_work. The name new
# clashes with a system header file.
CCINCLUDES = -idirafter .
THREADLIBS=-lpthread
ifdef BUILD_CCC296
CC=/usr/bin/g++296
endif
And I am executing the make file using the command :
make -f demo12.mk buildoci CDEMOEXE=custagg.so CDEMOOBJS=custagg.o
I am not getting any error while running this make file.
Can you please tell me whether PLSQL/Oracle is able to locate the file or not. Incase, if it is locating the file but due to some error in the custagg.so it is throwing that error. If this is the case, is there any way that i can debug the C program .....how can i install the debug_extproc package.. I am really new to C & OCI ... if the custagg.so is being located then there might be some problem with the way I am dynamically allocating memory to some variables.
Please kindly reply to this Post/response.
Please let me know if you also want to see my program code.
Thanks & Regards,
-NN -
Haven't been able to use pages for a while. Keep getting following message. Have tried reinstalling iWork, but no luck. Same problems with Keynote and Numbers/
Have you moved Pages from its installed location? Or just dragged a copy to your current system?
It can't find some of its resources apparently.
Peter
Maybe you are looking for
-
EFI update for the mid-2010 15" MacBook Pro?
Hi, I was wondering if Apple enabled the Lion Internet Recovery feature for the Mid-2010 MacBook Pros in the new round of EFI updates released yesterday. I know that they already did this for the 13-inch weeks ago but I wanted to make sure they expan
-
Error while saving interactive pdf form:The document could not be saved.
Hello, Can anyone please help me here. Not able to save the pdf form. I have interactive form which contains static fields,text fields,Document digital signature and a submit button. After filling and signing the form it will ask for saving the form.
-
How do i get my securety quetions if i forgot, how do i get my securety quetions if i forgot
how do i get to know my securety quetion if iforg ot them
-
I changed my email because I could not open my other one but every time I try to download something it asks for me to verify the other email can u please help me
-
I am trying to download abobe flash player but it says i have to close my safari when i already have
i am having trouble downloading the latest abobe flash player because on the instillation it says i have to close my safari when it already is