Problem with installing both 32 and 64bit Java7u45

Hi all.
For some reson we need to install Java7u45 because of an inhouse made application only runs on java7u45 32bit,
Now to my issue, we hava about 200 windows7 x64 machines who need both 32 and 64 bit java7u45.
If i install the 32bit the inhouse appliction works, but then other third party application will not run (SoapUI, Eclipse).
If i install both 64 and 32 bit the inhouse application will not run, i get this error message "NativeSwing[1]: Caused by: java.lang.UnsatisfiedLinkError: Cannot load 32-bit SWT libraries on 64-bit JVM"
In the Java Control Panel only the 64bit java shows up, and if i try to add javaw.exe from C:\program files (x86)\java\bin it will add the correct line, and i looks ok until i close the java control panel and open it, it will still only show the 64bit java.
So is there anyway to change the default 64bit java to 32bit and make it stick?
Thank you.

panosk wrote:
uwinkelvos wrote:This isn't GWT, is it?
Hi, is there anybody using Eclipse and GWT in arch 64?
I use Eclipse Galileo 64 bit and trying to use GWT I get the error "...wrong ELF class: ELFCLASS32 (Possible cause: architecture word width mismatch)..."
Should I nstall bin32-jre from AUR and use it to start a 32 bit version of Eclipse? Is there another way using the 64 bit version of eclipse?

Similar Messages

Problem with installing IOS and ejecting CD

Hi guys,
I have a problem here where my computer got stolen from my house. The police were able to cease it back but they have to reformat everything. The Imac came back but there were no IOS in it (blank harddisk). I put in the CD that comes with the computer when I bought it.
However, Imac wouldnt read the cd and it would not eject the disc for me too. Can anyone please advice of how I can eject the cd and reinstalling it please?
PS: I have not mac keyboard or mouse as well as it was stolen and they were unable to retreive it.
Thanks in advance
Nick

Ok well I went ahead and picked through the different boards here and found my answers. You have to uninstall the security patch that is causing the problem with QuickTime. You still can’t use the latest version of I-tunes. You will have to use 6.0.4.2 which is what came on the CD with my I-Pod (if you update your I-Pod beyond a certain version it wont work right with I-Tunes) I also completely uninstalled I-Tunes and QuickTime from my computer by using a install clean up program form Microsoft. After everything was uninstalled I used the instructions on how to turn off conflicting programs to make sure the reinstalls went smooth. Here are the three postings I read to get the information I needed.
http://discussions.apple.com/thread.jspa?messageID=2541112&#2541112 (Security Patch)
http://discussions.apple.com/thread.jspa?threadID=493515&tstart=15 (Installer Cleanup)
http://discussions.apple.com/thread.jspa?messageID=2469661&#2469661 (More on Security Patch)
I hope they fix the 64 bit problem soon.

Problems with Installing iTunes and wireless network connection

Every time I attempt to install iTunes it completely kicks the internet off and an error comes up that the wireless network adapter to not connect or is not detected. My internet service is connected to a router which I receive wirelessly to my laptop. I do not understand why it is happening and to get the internet to work again I needed to do a system restore. Any ideas why this is happening. Also when iTunes was installed it came up correctly, it would just not connect to the net. I have had a previous version on my old laptop but since purchasing this new laptop I am having such difficulty. On another note, if this problem can be resolved, once iTunes is working is there a way to get the songs from my old computer onto the new? Thanks for the help in advance!

I just saw your post and I resolved this on mine for my wired connection. I'm willing to bet that the issue is the same for wireless. Here's what I found.
Issue:
During the installation, iTunes installs some network components related to mobile device support over ethernet(Apple Mobile Device Ethernet Service - netaapl.inf). At the same time, according the logs, the install process removed OEM18.inf. This almost exactly coincided with the time that I saw the network connection die (preceded it by a few seconds).
Basically, iTunes appears to be removing a required network component.
Resolution:
After installing iTunes and the network connection breaking, remove the network device from Device Manager and allow Windows to reinstall it automatically.
The following instructions are for Windows 7, but they are close enough to follow for other versions of Windows.
1. Click the Start button (Jewel in Vista and Win7).
2. Right-click Computer and click Manage in the menu that appears (type your password or click Yes if prompted).
3. On the left side of hte Computer Management window, click Device Manager.
4. Click the arrow (or plus sign) next to Network Adapters to expand that section.
5. Right-click your network adapter and click Uninstall in the menu that appears.
6. Click OK.
7. Reboot.
Windows should automatically detect and reinstall your network device on boot.

Problems with installing Recorder and LiveDrvUni-P

I have a Sound Blaster Li've! dri've and was running the driver from the Li'veDrvPack_Patch. I have recently bought a turntable with an amp that has RCA cables. I hooked it up to my Li've! dri've and could not get it to play (the Aux 2 port did not show up in any of my software). To remedy the problem, I completely uninstalled my drivers and all SB ap
ps.
After that, I installed the Li'veDrvUni-Pack. I can now play from the Aux 2 input! Yay, one problem solved.
Now, I cannot record anything. The Recorder app I used to have was uninstalled. I tried to re-install it by downloading it from the Creative website but it looks like that is just a patch and not the complete app. It won't install for me because I don't already have an earlier version installed. I took out my old SB Li've! driver and application CDs. I found the Recorder application on the driver CD. However, when I try to run the setup, I cannot install Recorder without installing the old drivers. I need the Li'veDrvUni-Pack version of drivers because my turntable won't work with it so I do not want to install these old drivers as I'd have to update it with the Li'veDrvPack_Patch instead. Is there anything I can do to remedy this or am I screwed? If the latter, any recommendations on recording software? I prefer free of course but reasonably priced is ok as long as it's not bloated.
Thanks!

Download the recorder app from the website. 'tis a self-extracting archi've which can be unzipped into a folder on yer hard disk. Unzip and go two levels down the directory tree and run the setup.exe in there. That should install it for you.

Problem with install Presenter 9 (64bit)

Hi,
I´m trying to install Presenter 9, 64 bit on Windows 7 64bit with PowerPoint 2010 64bit.
During install, I get an error:
Exit Code: 7 Please see specific errors below for troubleshooting. For example, ERROR: -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 2 error(s) ERROR: ERROR: System check returned with error : 6
Can enyone help me?

Found a related thread
http://forums.adobe.com/message/5770607#5770607

Problems with installing photoshop and dreamweaver etc.

I have a new I mac, when I transferred all my programms from my Mac book pro I can´t open photoshop on the new I MAC;
it says error 150:30.
The new MAC doesn´t have a dvd reader so I can´t install the photoshop with the dvd.
What shall I do?
It is the sam with all the aobe programms I have.
Best
Johanna Schartau
[email protected]

Please refer:
http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html
Regards,
Ashutosh

Problems with installing coldfusion mx and setting up CF for home practice

problems with installing coldfusion mx:
hello,
i have some books of cf.
i need to start on my tutorials
however,
they said the prereq is mx server
home site,
1. i did download mx 7 and chose mx developer edition.
my problem is that when it is self configure. (the second
option without apache or iis)
it is reall taking a long time to configure 2hrs. i did not
let it finish so i stopped the process.
what am i doing wrong in the set up process.
2. do i need apache to run CF. if so i did go to apache .org
and went to a mirror site. but i dont know which one to down load.
any tips?
3. can i run my tutorials with out apcahe or IIS?
4 . the book also mentioned homesite / dreamweaver as a
editor.
where and how can i put this in my personal PC?
i really appreciate your help in advance
i am really eager to learn so i can develop for my work, i
figure if i get a head start at home, i wont have to rely on
others.
thanks if someone can help me set up CF at home.

i got a copy from a disc today and i installed it.
i think this one is good.
i also have apcahe 2.0 together in a cd.
i need a walk through on both
mx 7 and apache 2.0 for installing and configure.
can you help me?

Problem with installing and uninstalling applicati...

hi all,
I have a problem with installing or uninstalling apps on 808. When i try to install an application through Nokia suite or when trying to run the application file from the phone's memory the screen freezes and becomes unresponsive but the 3 phone buttons work just fine. I have to shut down the phone and the screen becomes responsive again. Anything available to help me wiith this situations as I cannot use any of the apps I have. Any help much appreciated.
Regards
Alex

You are not alone. Im also having the same issue because we do alot of install and uninstall apps. This is the bad point of symbian. But I tired to install the latest FP2 it will be slightly abit smoother now. So you have the latest version now but did you tired to restore any backup yet? It might be the setting on when you restore that affect it. The feezing should be shorten on FP2 but it will still remain there depending on the type of apps from what I experience.
I hope they will provide multiple function to uninstall apps since it will go through a long process to uninstall apps 1 by 1.
Reason is because some apps will go through process like preparing install, process install, finalising install which take away your control for that few seconds or a minute instead runnning in background mode. Its not convenient to uninstall more apps.

Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?

Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?
I have been trying to install Photoshop CS6 & CC and Acrobat Pro XI on my Mac Pro (late 2013). I keep getting a 'configuration' error message and wondered if the problem was wide spread.
TIA,
Jerry

Thanks, Martin.
Good to hear someone has had success. The lack of it here is frustrating and depressing.
Thanks again,
Jerry

Severe problem with installing and starting Audio-DVD Pla

Hi,
after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
Any ideas?
Best regards and thank in advance,
PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

Hi,
after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
Any ideas?
Best regards and thank in advance,
PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

I have bought Adobe Photoshop Elements 10 last August 2013 and having problems with installing it on Windows 8.1?

I have bought Adobe Photoshop Elements 10 last August 2013 and having problems with installing it on Windows 8.1. Why am I having this problem?

You can check you Adobe account online to see if the serial number is registered under your account. If not then your only option will likely be to contact Adobe Support directly thru chat to see if they can provide you with a/the serial number. For them to do so will require you being able to prove ownership.
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

Problem with installing Photoshop elements 9 and adobe support advisor

Hi, I've received a graphic tablet with 2 programs: the first has been downloaded and works perfectly while the second, PSE9, has been giving me problems for at least a week!
I downloaded it and now I have a winzip file full of strange things (one of this is set up exe which tells me that I have to install adobe support advisor) and two files which said 3DF.tmp and PSEP9(1).zip.download and if I try to click them they tell me that I have to find on the Net the program to open them because I can't. And I don't know which program is required.
I tried a lot of times to download the adobe support advisor, I have enough space on my disc and my farewall is deactivated, but when the program begins I saw this annoyant message
cpsid_82829s5 Missing installation file bootstrapper error occured
with this code for a support from adobe 00-67325-032018052012
I unistalled it and retried, but nothing.
Please, I just want to use my tablet with the programs which are comprised in the package, why it's so difficult to download this damn photoshop elements 9????????????
Thank you

In the error message it doesn't tell me
"Installer has detected that a machine restart is pending. It is recommended that you quit the installer, restart try again,"
neither "Installer failed to initialize. File not found. Please download Adobe Support Advisor to detect the problem."
and I have enough space and I have Windows xp then I should be able to install it. I tried to unistall and install again the support advisor but nothing. I'm desperate.
Messaggio originale----
Da: [email protected]
Data: 18/05/2012 22.20
A: "Questionlady"<[email protected]>
Ogg: Problem with installing Photoshop elements 9 and adobe support advisor
Re: Problem with installing Photoshop elements 9 and adobe support advisor created by Jeff A Wright in Trial Download & Install FAQ - View the full discussion
Did you try the steps listed in http://helpx.adobe.com/creative-suite/kb/troubleshoot-error-messages-b ootstrapper-cs5.html which was identified by the Adobe Support Advisor? If so can you please list each step and the result of those steps. This will allow us to best advise you on your next steps.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4420419#4420419
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4420419#4420419. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Trial Download & Install FAQ by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Having problems with ipad mini and Siri. Works sporadically, will work once and then the second time not. Worked all the time with the original Mailbox app. Then started doing the same thing when I installed the new update so wondering if it is software?

Having problems with ipad mini and Siri. Works sporadically, will work once and then the second time not. Worked all the time with the original Mailbox app. Then started doing the same thing when I installed the new update so wondering if it is software?

Hi,
I have the check box on a second Partition but not on the Time Machine one
I forget what I did now to get this called "Recovery HD"
For the rest try https://discussions.apple.com/docs/DOC-4055 User Tip that links to Pondini's work on Time Machine.
10:17 pm Friday; May 2, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

TS5376 I'm having problems with install version 11.1.4. If I uninstall and reinstall will I lose all my downloaded music?

I'm having problems with install version 11.1.4. If I uninstall and reinstall will I lose all my downloaded music?

Hi, so did I. It seems to be a huge problem with everyone. I opened a folder on desktop and called it target. I copied all my songs into that folder.
I uninstalled Itunes completely. Rebooted. Then I installed a fresh install.
I then dragged all the songs back to Itunes and it worked. I hope that helps.
I read an article the other day and apple is suppose to come out with some genius fix for this problem, it really seems to be global.
Good luck,

Hello Apple. Iphone6 ios8.0.2. I have problem with activation imsg and fctm. My number doesnt display on both apps. I can only use them with my apple ID. How can i fix this problem. Country:Azerbaijan. Number: *********

Hello Apple. Iphone6 ios8.0.2. I have problem with activation imsg and fctm. My number doesnt display on both apps. I can only use them with my apple ID. How can i fix this problem. Country:Azerbaijan. Number: *******
<Edited by Host>

Hello Khayalh,
You should be able to link your phone number by following the steps in the article below. From your iPhone, sign out of FaceTime and iMessage and then sign back in and it should link. Check in the Start Conversation With and I Can Be Reached at section in iMessage and FaceTime respectively.
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Regards,
-Norm G.

Problem with installing both 32 and 64bit Java7u45

Similar Messages

Maybe you are looking for