Problem with installing OS. hal.dll missing or corrupt

I feel I have a hardware issue with this laptop. It is a M115-S3095. I had XP home installed but had driver issues. Now I have the recovery disk with it I get "Error 10DD0A0057". One time I did get my retail XP copy to install it gave me "hal.dll is missing or corrupt". To add to the mix I can not boot a Linux OS Disk. It just get to the installing logo and thats it. The hard drive has been tested good , Memory check was good. So just to pick brains and I know some of you know alot more than me...Do we need a motherboard replacement ? I work on alot of laptops and this is a new one on me. Thanks in advance for any input.

> On Thu, 28 Sep 2006 17:18:05 GMT, [email protected] wrote:
>
> > I've tried creating a completely new image , it also seems to happen if we
> > use the image to reimage the exact same computer ( no hardware
> > diffrences)... any ideas?
>
> did it work before? what has changed?
> --
>
> If you have already compiled drivers or have linux.2 please put them on
> http://forge.novell.com/modules/xfmo...ect/?zfdimgdrv
> Live BootCd and USB Disk from Mike Charles
> http://forge.novell.com/modules/xfmod/project/?imagingx
> eZie http://forge.novell.com/modules/xfmod/project/?ezie
>
> Marcus Breiden
>
> If you are asked to email me information please change -- to - in my e-mail
> address.
> The content of this mail is my private and personal opinion.
> http://www.edu-magic.net
yes , on one computer we have used that image before without any other
problems. The computer we are using is the exact same model as the one we
used to take the image from.
In the other case we are taking a computer and imaging it to another drive
in order to replace the drive. So everything is the same , except for the
drive.

Similar Messages

Problem with installing iTunes

So these are my problems with installing iTunes.
At first it was :
A required iTunes component is not installed.Please repair or reinstall iTunes (-45019)
Then it got worse as it would not even open and these would appear:
The program can't start because AVFoundationCF.dll is missing from your computer. Try reinstalling the program to fix this problem.
and this would appear:
iTunes was not installed correctly. Please reinstall iTunes.
Error 7 (Windows error 126)
I reinstalled maybe about 5 times or more...
If I thought I solved the above problem, this would appear:
iTunesHelper.exe is not installed on my computer.
I seen other people comment that you should unistall and restart the computer and install the setup again, but it does not work..
And others would say to repair the AAS or iTunes etc..
And after trying all these it does not work???
What else works?

I also tried repairing the Microsoft NET.

I'm having a problem with coreaudiotoolbox and corevideo.dll.

I'm having a problem with coreaudiotoolbox and corevideo.dll. PC was corrupted, I restored. Now when I launch Safari, I run into errors, can't find these two dll files. Itunes won't download at all because it says something is missing but won't say what. Now what do I do? Apple won't help because they want $50 dollars just to talk with me and I've been down that road before and to no satisfaction. Help please!!

Taken at face value, you're having trouble with Apple Application Support program files there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept, so an AAS problem can affect both iTunes and Safari.)
Let's try something relatively simple first. Restart the PC. Now head into your Add or Remove programs control panel, select "Apple Application Support", click "Change" and then click Repair.
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post (although it's for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things):
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more. Itunes starts but before anything loads a window pops up saying that the prograam has encountered a problem and sh...

Problem with installing Photoshop elements 9 and adobe support advisor

Hi, I've received a graphic tablet with 2 programs: the first has been downloaded and works perfectly while the second, PSE9, has been giving me problems for at least a week!
I downloaded it and now I have a winzip file full of strange things (one of this is set up exe which tells me that I have to install adobe support advisor) and two files which said 3DF.tmp and PSEP9(1).zip.download and if I try to click them they tell me that I have to find on the Net the program to open them because I can't. And I don't know which program is required.
I tried a lot of times to download the adobe support advisor, I have enough space on my disc and my farewall is deactivated, but when the program begins I saw this annoyant message
cpsid_82829s5 Missing installation file bootstrapper error occured
with this code for a support from adobe 00-67325-032018052012
I unistalled it and retried, but nothing.
Please, I just want to use my tablet with the programs which are comprised in the package, why it's so difficult to download this damn photoshop elements 9????????????
Thank you

In the error message it doesn't tell me
"Installer has detected that a machine restart is pending. It is recommended that you quit the installer, restart try again,"
neither "Installer failed to initialize. File not found. Please download Adobe Support Advisor to detect the problem."
and I have enough space and I have Windows xp then I should be able to install it. I tried to unistall and install again the support advisor but nothing. I'm desperate.
Messaggio originale----
Da: [email protected]
Data: 18/05/2012 22.20
A: "Questionlady"<[email protected]>
Ogg: Problem with installing Photoshop elements 9 and adobe support advisor
Re: Problem with installing Photoshop elements 9 and adobe support advisor created by Jeff A Wright in Trial Download & Install FAQ - View the full discussion
Did you try the steps listed in http://helpx.adobe.com/creative-suite/kb/troubleshoot-error-messages-b ootstrapper-cs5.html which was identified by the Adobe Support Advisor? If so can you please list each step and the result of those steps. This will allow us to best advise you on your next steps.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4420419#4420419
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4420419#4420419. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Trial Download & Install FAQ by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

"disk error" or "hal.dll' missing

I kept getting "hal.dll" missing after the initial dos-style XP install, and googling about led me to believe it was because I was deleting the boot camp partition during xp setup and re-formatting as NTFS.
So I tried just selecting the BOOTCAMP partition as is, and now the error is different - it simply says "disk error" at XP boot up.
Note this is BEFORE the actual XP install, this is the restart after the initial XP copying files setup bit.

I also got "disk error" message when I first installed XP WITHOUT formatting the Windows partition. After I formatted it everything works fine.
I also got "hal.dll" error when I created 2 partitions on Windows BUT formatted only the partition that I installed the XP on. I believe the error was because that unformatted partition. I haven't tried formatting both partition yet, though.
Have any of you tried nerowolfe's advice? Did it work?

Problem with installing Flash Player 10 RC

Hello
I have some problem with installing Flash Player 10 RC. When
I try to do it I have error:
"Error opening file: C:\WINDOWS\system
32\Macromed\Flash\NPSWF32.dll". Why ?
Regards

Does it have any solution ?

Problem with installing and uninstalling applicati...

hi all,
I have a problem with installing or uninstalling apps on 808. When i try to install an application through Nokia suite or when trying to run the application file from the phone's memory the screen freezes and becomes unresponsive but the 3 phone buttons work just fine. I have to shut down the phone and the screen becomes responsive again. Anything available to help me wiith this situations as I cannot use any of the apps I have. Any help much appreciated.
Regards
Alex

You are not alone. Im also having the same issue because we do alot of install and uninstall apps. This is the bad point of symbian. But I tired to install the latest FP2 it will be slightly abit smoother now. So you have the latest version now but did you tired to restore any backup yet? It might be the setting on when you restore that affect it. The feezing should be shorten on FP2 but it will still remain there depending on the type of apps from what I experience.
I hope they will provide multiple function to uninstall apps since it will go through a long process to uninstall apps 1 by 1.
Reason is because some apps will go through process like preparing install, process install, finalising install which take away your control for that few seconds or a minute instead runnning in background mode. Its not convenient to uninstall more apps.

Problem with installing Elements - from noob

I have problems with installing Elements, it gives my an unknown mistake - I already have CS4 up and running, could this be the case?

Chances are not very good that pse 4 will run on os x 10 6.8 unless you were upgrading from an earlier mac version that already had pse 4 installed.
as per this:
http://forums.adobe.com/message/4474236#4474236

Problem with Installing Nokia Ovi Store in E51

I am having problem with installing nokia Ovi store in my E51. Whenever I try to download Ovi store from my E51, it shows a error message that the component is built in and cannot be installed. I dont know wat to do now. Can anyone please give me some advice. Thanks in advance.

Hi there!
This means that the Ovi Store is currently installed in your E52 phone, what I can suggest is try checking under Application Manager > Installed Application, check if the Ovi Store is there. If you can't see it, try to perform the soft reset (press *#7780# on the main screen of the phone and it will prompt you restore all original phone settings? phone will restart. Press YES and it will ask you for the lock code 12345.) If anything else please reply to this message.
Hope tis' Help!
"If you think this post is helpful, please click on the green button"

Problem with installing CUCM on MCS-7816-I5

Hi to all.
I have a problem with installing CUCM 8.6.1 on new MCS-7816-I5 (IBM) hardware. The problem is that installation loops in restart after upgrading MCS firmware. Actualy, installation does not sucessfully upgrade firmware, so every time it detects old firmware and trying to upgrade it.
I also tried update MCS firmware with downloaded Firmware Update Utility 3.6.5 CD from Cisco downloads, but it also fails.
Does anyone have idea what's going on? Is this a Cisco failure or IBM server failure?
Here is some details from log file generated with this Firmware Update Utility 3.6.5:
==============
Initial Selection
Machine Type: 4251 OS: SLES 10 Arch: 64 bit
IsPartition: 0
Update:   IBM System x uEFI update for x3200 M3 /3250 M3
Severity: Critical
Reboot:   Reboot Required to take effect
UpdateID: ibm_fw_uefi_gye142a_linux_32-64 Requisite:None
Version: 1.08 (GYE142A)
Install: 1.06 (GYE135A)
Select:    Yes
Update:   IBM Dynamic System Analysis
Severity: Recommended
Reboot:   Reboot Required to take effect
UpdateID: ibm_fw_dsa_3.20_dsyt75x_linux_32_64
Requisite:None
Version: 3.20 (DSYT75X)
Install: 3.01 (DSYT60K)
Select:    Yes
Update:   IBM Online SAS/SATA Hard Disk Drive Update Program
Severity: Critical
Reboot:   Not Required
UpdateID: ibm_fw_hdd_sas-1.08.01_linux_32-64
Requisite:None
Name:     WD2502ABYS-23B7A0 (/dev/sg0)
Version: 02.03B07
Install: 02.0
Select:    Yes
Update:   Integrated Management Module Update
Severity: Critical
Reboot:   Not Required
UpdateID: ibm_fw_imm_yuoo84c_linux_32-64 Requisite:None
Version: 1.22 (YUOO84C)
Install: 1.10 (YUOO57H)
Select:    Yes
IBM Command Line IMM Flash Update Utility v1.05.03 Licensed Materials - Property of IBM
(C) Copyright IBM Corp. 2009,2010 All Rights Reserved.
LAN-over-USB device not configured.
Error connecting to IMM using IP address 169.254.95.118.
Please verify the LAN over USB interface is configured properly and active.
Error flashing firmware: 3
IBM Command Line IMM Flash Update Utility v1.10.11 Licensed Materials - Property of IBM
(C) Copyright IBM Corp. 2009,2010 All Rights Reserved.
Refreshing LAN-over-USB IP address. This may take several minutes.
Attempting to discover the IMM(s) via SLP.
Error connecting to IMM using IP address 169.254.95.118.
Please verify the LAN over USB interface is configured properly and active.
Error flashing firmware: 10
(C) Copyright IBM Corp.2010. All Rights Reserved.
FdrvWL -- Flash Drive(s)                                     3.10.08.19
   1 Ada:0 SID:0   PN:44E9172:42C0463 SN:1J242783 FW:02.03B07              T:13 FW:Ok
AdaNbr(Type)      DevFnd Flashed(SAS SATA) NbrFailed
0(onBoard)           1       0   0    0          0
                       1       0   0    0          0 Error(s)
Update completed successfully. <-- THIS SUCCESS, BUT EVERY TIME IT UPGRADEING AGAIN FROM OLD VERSION, LIKE NEVER REALY UPGRADED TO NEWER VERSION
IBM Command Line IMM Flash Update Utility v1.10.11 Licensed Materials - Property of IBM
(C) Copyright IBM Corp. 2009,2010 All Rights Reserved.
Refreshing LAN-over-USB IP address. This may take several minutes.
Attempting to discover the IMM(s) via SLP.
Error connecting to IMM using IP address 169.254.95.118.
Please verify the LAN over USB interface is configured properly and active.
Error flashing firmware: 10
===========================
Thanks,
Sinisa.

Hi Sinisa,
It almost sounds like this bug;
CSCtn81201
Incorrect "Hardware Configuration Error" due to hardware setup errors
Symptom:
Refresh upgrade stops with IMM device detection, and then server being reported as unsupported
Conditions:
in-band USB interface was disabled, which is configurable via IBM system X or IMM (browser) interfaces.
Workaround:
change the in-band usb interface settings to enabled.
Related Bug
Status
Fixed
Severity
4 - minor
Last Modified
Aug 17,2011
Product
Cisco Unified Communications Manager (CallManager)
Platform
Dependent
Technology
nav
1st Found-in
8.6(0.99081.3)
Fixed-in
8.6(1.96000.1), 9.0(0.95070.38), 9.0(0.95070.39), 8.6(1.99989.1), 8.6(1.95050.1), 9.0(0.96000.1), 8.6(1.97011.2), 8.6(1.95190.40), 8.6(1.97011.1), 8.6(0.95180.9), 9.0(0.95010.1), 8.6(1.95020.1), 8.6(1.95040.1), 8.6(0.98000.50), 8.6(0.98000.17), 8.6(0.99981.2), 8.6(1.10000.1), 8.6(1.99986.1), 8.6(1.95020.58), 8.6(1.96000.51), 8.6(1.10000.43)
Cheers!
Rob

Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?

Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?
I have been trying to install Photoshop CS6 & CC and Acrobat Pro XI on my Mac Pro (late 2013). I keep getting a 'configuration' error message and wondered if the problem was wide spread.
TIA,
Jerry

Thanks, Martin.
Good to hear someone has had success. The lack of it here is frustrating and depressing.
Thanks again,
Jerry

Severe problem with installing and starting Audio-DVD Pla

Hi,
after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
Any ideas?
Best regards and thank in advance,
PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

Hi,
after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
Any ideas?
Best regards and thank in advance,
PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

Problems with installing HP OfficeJet Pro L7590 driver All-in-One

Hello HP team.
Having problem with installing driver for HP Officejet pro L7590.
Starting the process the process bar goes to the end 100% and then disappear.
After that nothing happens.
Rebooting doesn't help.
Windows 7-64

Thanks for getting back to me!
Lets try some more steps:
Uninstall, level 3 for HP PC or level 4 for non-HP PC.
1. Click Start and type %temp% in the run field and click OK.
2. Look for, and open the folder starting with 7z (Example: 7zS2356) (if there is more than one 7z folder, try the most recent one)
3. Open folder Util
4. Open folder CCC
5. Run the uninstall_ L4.bat for a non-HP PC or run the Uninstall_L3.bat for a HP PC
6. When the uninstall has completed restart the computer
Try to install again using the HP Printer Install Wizard for Windows
Let me know how this goes please
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

I have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this?

i have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this

Try downloading the trial. It ought to detect that you have a 64-bit system.
You aren't using Vista, are you? PSE 13 requires at least win 7 and I think a few folks with vista have gotten a similar error message on trying to install it.

Problem with install on new compy, something to do with external?

Hello, so I have been having a few problems with installing Arch on my new computer. On my old laptop I never ran into this problem on any distro of LINUX I installed, nor on any other of the systems I have installed Arch on. I believe it might have something to do with the fact that I am running the live cd off of an external dvd drive maybe? I am kind of stuck here, so any help would be greatly appreciated! Thanks!
If it helps
System Specs:
Motherboard: ASROCK 890FX Deluxe3
Processor: AMD Phenom II X4 955
Graphics Card: ATI Radeon HD 5700 Series
Hard Drives: 2 SATA 160gb hd RAID 0, and one 160gb ATA hd
OS: Windows 7 Professional on the RAID 0, hoping to put ARCH on the ATA (I have tried booting the ATA first in the list behind the USB DVDROM to no avail)
External Drive: Sony DVD/CD RW drive DRX-510UL
External DVDROM is the exact same drive I used to install windows 7 professional.
External DVDROM is plugged into one of my USB 2.0 ports, but the error still persists.
I am using the EXACT same disk I used when installing it on my past computer.
Trying to install x86_64 version of Arch, gets past the splash.
Output that I could catch:
:: Running Hook [archiso]
:: Rinning Hook [archiso_pxe_nbd]
:: Mounting tmpfs, size 75%... done.
:: Waiting for boot device...
Waiting 30 seconds for device /dev/disk/by-label/ARCH_201005 ...
usb 9-1 : device descriptor read/64, error-62
usb 9-1 : new full speed USB device using ohci_hcd and address 3
usb 9-1 : device descriptor read/64, error-62
usb 9-1 : device descriptor read/64, error-62
usb 9-1 : new full speed USB device using ohci_hcd and address 4
usb 9-1: device not accepting address 4, error -62
usb 9-1 : new full speed USB device using ohci_hcd and address 5
usb 9-1: device not accepting address 5, error -62
hub 9-0:1.0: unable to enumerate USB device on port 1
scsi 6:0:0:0: CDROM SONY DVDRW DRU-510A 1.0d PQ: 0 ANSI: 0
scsi 6:0:0:0: Attached scsi generic sg3 type 5
sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
ERROR: boot device didn't show up after 30 seconds...
Falling back to interactive prompt
You can try to fix the problem manually, log out when you are finished
/bin/sh: can't access tty; job control turned off
If you need any other info, I can grab it of course.
Last edited by crusniknano (2010-07-12 19:49:13)

K, got it running. was having errors with the USB hd, but just changed the name it booted from to the name of the drive. thanks!

Problem with installing OS. hal.dll missing or corrupt

Similar Messages

Maybe you are looking for