Problem with installing power manager

Hello,
I've been trying to install power manager 6.36 without success.
The first setup which installs files into "c:\swtools\readyapps\pwrmgrv" goes well. but when im trying to install Power Manager and click next to install to the destination folder ("Program files (x86)\ThinkPad\Utilities) it freezes.
http://postimage.org/image/4plchblmx/ - freezes here and cant do anything but exit the installation.
After it failed couple times I've been trying to install my original power manager 3.48 but it freezes just like 6.36.
*tried to install it with Manual Install & Silent Install - both failed.
What can I do?

I had the same issue with some sw earlier on my laptop with Win7/64 bit. That sw didn't want to be installed and needed the old .NET vesion. At the same time my system restricted old version .NET environment installtion process from M$ site or from sw installation package as I had up to date .NET. The result was I couldn't avoid that strange behaviour.
x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
Do it well, worse becomes itself
Русскоязычное Сообщество   English Community   Deutsche Community   Comunidad en Español

Similar Messages

  • Macbook Late 2011 freezing, problem with CPU power management.

    Hi everyone.
    I have Macbook Pro 15 Late 2011. And i have a problem with it.
    When laptop is cold, sometimes, it can freeze. Other then this there's no problems with it, no problems at all.
    I solved this problem by deleting AppleIntelCPUPowerManagement.kext, so for now it's getting a little hotter (not very).
    And my question: is there any utility or app, which could let me see what AppleIntelCPUPowerManagement.kext is doing with system, so i could see what causing freezes. I don't have apple services in my country, so i can't bring this laptop to repair.
    And if you don't know answer to this question, but know forum, where i might find answers, please write it.
    Thanks in advance.
    Sorry for language, i'm not an english speaking.

    Catfish, if you're on AC power, and you don't run with a fully charged battery in the machine, then it won't run at full performance. Plus, if the battery is worn out, then it won't charge to nearly its original full capacity, and thus the machine won't run at full performance on AC power.
    Note that, if you leave the battery in a drawer for months without using it, that can kill the battery.
    Good luck!

  • [SOLVED] Lid doesn't suspend anymore with xfce power manager

    The options "When laptop lid is closed" are set to suspend (and used to work), but still, when I close my lid, nothing happens. Using the logout dialog or the suspend button my keyboard works. Is it a problem with xfce-power-manager, or ACPI not registering the lid event anymore? Any idea how to fix that?
    [edit]
    I solved that problem by removing ~/.config/xfce4/xfconf/xfce-perchannel-xml/xfce4-power-manager.xml, killing the power manager and reloging in my session to flush the settings. Then I reconfigured the lid closed action to suspend (and everything else to my liking).
    Last edited by benob (2009-07-08 17:36:47)

    Sorry to bother you again, but for some reason it doesn't work anymore...
    Somehow it can't lock the GNOME session, because when I enter the above line from /etc/acpi/handler.sh manually as root in TTY1, I get this error:
    ** Message: Failed to get session bus: Befehlszeile »dbus-launch --autolaunch=c9375f4ea0008d92177b28db000009ae --binary-syntax --close-stderr« brach mit von Null verschiedenem Beenden-Status 1 ab: No protocol specified\nAutolaunch error: X11 initialization failed.\n
    If I enter this command inside GNOME, everything works just fine, it locks the screen and suspends.
    EDIT:
    Setting the XAUTHORITY environment variable properly did the trick. Therefore, I borrowed some lines from here: https://wiki.archlinux.org/index.php/Su … losing_lid
    Thread marked as SOLVED again.
    Last edited by perpetrator (2011-10-17 14:25:11)

  • Problem with Installing Nokia Ovi Store in E51

    I am having problem with installing nokia Ovi store in my E51. Whenever I try to download Ovi store from my E51, it shows a error message that the component is built in and cannot be installed. I dont know wat to do now. Can anyone please give me some advice. Thanks in advance.

    Hi there! 
    This means that the Ovi Store is currently installed in your E52 phone, what I can suggest is try checking under Application Manager > Installed Application, check if the Ovi Store is there. If you can't see it, try to perform the soft reset (press *#7780# on the main screen of the phone and it will prompt you restore all original phone settings? phone will restart. Press YES and it will ask you for the lock code 12345.) If anything else please reply to this message.
    Hope tis' Help! 
    "If you think this post is helpful, please click on the green button"

  • Problem with installing CUCM on MCS-7816-I5

    Hi to all.
    I have a problem with installing CUCM 8.6.1 on new MCS-7816-I5  (IBM) hardware. The problem is that installation loops in restart after upgrading MCS firmware. Actualy, installation does not sucessfully upgrade firmware, so every time it detects old firmware and trying to upgrade it.
    I also tried update MCS firmware with downloaded Firmware Update Utility 3.6.5 CD from Cisco downloads, but it also fails.
    Does anyone have idea what's going on? Is this a Cisco failure or IBM server failure?
    Here is some details from log file generated with this Firmware Update Utility 3.6.5:
    ==============
    Initial Selection
    Machine Type: 4251 OS: SLES 10 Arch: 64 bit
    IsPartition: 0
    Update:   IBM System x uEFI update for x3200 M3 /3250 M3
    Severity: Critical
    Reboot:   Reboot Required to take effect
    UpdateID: ibm_fw_uefi_gye142a_linux_32-64 Requisite:None
    Version:  1.08 (GYE142A)
    Install:  1.06 (GYE135A)
    Select:    Yes
    Update:   IBM Dynamic System Analysis
    Severity: Recommended
    Reboot:   Reboot Required to take effect
    UpdateID: ibm_fw_dsa_3.20_dsyt75x_linux_32_64
    Requisite:None
    Version:  3.20 (DSYT75X)
    Install:  3.01 (DSYT60K)
    Select:    Yes
    Update:   IBM Online SAS/SATA Hard Disk Drive Update Program
    Severity: Critical
    Reboot:   Not Required
    UpdateID: ibm_fw_hdd_sas-1.08.01_linux_32-64
    Requisite:None
    Name:     WD2502ABYS-23B7A0 (/dev/sg0)
    Version:  02.03B07
    Install:  02.0
    Select:    Yes
    Update:   Integrated Management Module Update
    Severity: Critical
    Reboot:   Not Required
    UpdateID: ibm_fw_imm_yuoo84c_linux_32-64 Requisite:None
    Version:  1.22 (YUOO84C)
    Install:  1.10 (YUOO57H)
    Select:    Yes
    IBM Command Line IMM Flash Update Utility v1.05.03 Licensed Materials - Property of IBM
    (C) Copyright IBM Corp. 2009,2010  All Rights Reserved.
    LAN-over-USB device not configured.
    Error connecting to IMM using IP address 169.254.95.118.
    Please verify the LAN over USB interface is configured properly and active.
    Error flashing firmware: 3
    IBM Command Line IMM Flash Update Utility v1.10.11 Licensed Materials - Property of IBM
    (C) Copyright IBM Corp. 2009,2010  All Rights Reserved.
    Refreshing LAN-over-USB IP address.  This may take several minutes.
    Attempting to discover the IMM(s) via SLP.
    Error connecting to IMM using IP address 169.254.95.118.
    Please verify the LAN over USB interface is configured properly and active.
    Error flashing firmware: 10
    (C) Copyright IBM Corp.2010. All Rights Reserved.
    FdrvWL -- Flash Drive(s)                                     3.10.08.19
       1 Ada:0 SID:0   PN:44E9172:42C0463 SN:1J242783 FW:02.03B07              T:13 FW:Ok
    AdaNbr(Type)      DevFnd Flashed(SAS SATA) NbrFailed
      0(onBoard)           1       0   0    0          0
                           1       0   0    0          0 Error(s)
    Update completed successfully.  <-- THIS SUCCESS, BUT EVERY TIME IT UPGRADEING AGAIN FROM OLD VERSION, LIKE NEVER REALY UPGRADED TO NEWER VERSION
    IBM Command Line IMM Flash Update Utility v1.10.11 Licensed Materials - Property of IBM
    (C) Copyright IBM Corp. 2009,2010  All Rights Reserved.
    Refreshing LAN-over-USB IP address.  This may take several minutes.
    Attempting to discover the IMM(s) via SLP.
    Error connecting to IMM using IP address 169.254.95.118.
    Please verify the LAN over USB interface is configured properly and active.
    Error flashing firmware: 10
    ===========================
    Thanks,
    Sinisa.

    Hi Sinisa,
    It almost sounds like this bug;
    CSCtn81201
    Incorrect "Hardware Configuration Error" due to hardware setup errors
    Symptom:
    Refresh upgrade stops with IMM device detection, and then server being reported as unsupported
    Conditions:
    in-band USB interface was disabled, which is configurable via IBM system X or IMM (browser) interfaces.
    Workaround:
    change the in-band usb interface settings to enabled.
    Related Bug
    Status
    Fixed
    Severity
    4 - minor
    Last Modified
    Aug 17,2011
    Product
    Cisco Unified Communications Manager (CallManager)
    Platform
    Dependent
    Technology
    nav
    1st Found-in
    8.6(0.99081.3)
    Fixed-in
    8.6(1.96000.1), 9.0(0.95070.38), 9.0(0.95070.39), 8.6(1.99989.1), 8.6(1.95050.1), 9.0(0.96000.1), 8.6(1.97011.2), 8.6(1.95190.40), 8.6(1.97011.1), 8.6(0.95180.9), 9.0(0.95010.1), 8.6(1.95020.1), 8.6(1.95040.1), 8.6(0.98000.50), 8.6(0.98000.17), 8.6(0.99981.2), 8.6(1.10000.1), 8.6(1.99986.1), 8.6(1.95020.58), 8.6(1.96000.51), 8.6(1.10000.43)
    Cheers!
    Rob

  • Has anyone had a problem with TapMedia File Manage on iPhone 5. I reported a WIFI functionality problem to the developer and asked for support. Instead they have been very unprofessional by name calling me instead of logically evaluate and troubleshoot th

    Has anyone had a problem with TapMedia File Manage installed on iPhone 5? I reported a WIFI functionality problem to the developer and asked for support. Instead the company has been very unprofessional by name calling me instead of logically evaluate and troubleshoot the problem

    Hi AKE1919,
    Welcome to the Support Communities!
    The following information should help you with this:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    http://support.apple.com/kb/HT1933?viewlocale=en_US
    Cheers,
    Judy

  • Problems with installing CS5 extended

    Hi, I'm in the process of setting up a new computer and had no problems with installing Lightroom but installing photoshop CS5 is proving to be a real pain. At first it refused to install itself and after many hours of trying it finally did but then I found out I needed to update camera raw so I downloaded that but that one now is refusing to install itself. At first it told me the Applications manager needed to be updated so I did that and still it refuses to install itself. I have tried to get help from Adobe but not a single person is responding to my requests for help so I am now trying the forums so does anyone know what is going on with it?
    Thanks!

    Do a search on adobe's site for the specs of cs5 and make sure your system will support it. Also see if your OS is listed as being supported. It is possible that cs5 is too old for your system.
    For  now all we can do is guess. Maybe someone else will have an idea.

  • Equium P200-1ED - have problem with installing VGA driver

    Hello
    I have problem with installing vga video driver, each time in installion it stops on
    Version: 6,14.10,4833 and there is error poping up.........
    Please help!

    Hello
    What error message is it exactly?
    Make sure that the chipset driver and SP2 is installed at least.
    I had a similar issue that I cant install the display driver. The error message was something like the hardware is not supported
    But it was very easy to solve this problem. I installed the driver via device manager. I have selected the graphic card and choose update driver. Then I did choose the advanced installation to choose the directory by myself.
    Anyway, after restart the driver was installed and it worked. :)
    Greets

  • Z40-70 compatibility issue with your power management system

    I noticed today that the Action Center says "Compatibility issue with your power management system." The description underneath is: Your power management system isn't working peoperly because a compatible driver is not available for this version of Windows. When I click on View message details it just says "Your computer was unable to download the solution at this time. Check to make sure your computer is connected to the Internet, and then try to download the solution again later." All power related functionalities however seem to be working. Battery is charging; battery percentage is showing; I can adjust screen brightness. I am not sure when exactly this problem started but it defenitely was not there before. Tried downloading and fixing the Power Management Software and updating BIOS. Still have the same message. System: Windows 8.1 64-bit 

    What model do you have? Can you post your MTM or model name?
    Sometimes these messages are a false alarm.

  • Yoga 2 pro / win8.1 - "Compatibility issue with your power management system"

     Hi,
    After downgrading form win10 back to 8.1 due to endless driver malfunction and a significant decrease in overall performance, I got this message in windows action center: “Compatibility issue with your power management system”. When I click on it it says: This solution could not be downloaded
    Most likely causes:
    • Your computer was unable to download the solution at this time. Check to make sure your computer is connected to the Internet, and then try to download the solution again later. As you can see, my internet connection is fine. Does anyone know how to solve this? Thanks,
    Daniel

    Check if installing this helps you:
    http://download.lenovo.com/consumer/mobiles/em8.0.2.3.exe
    If you already did this, check if you can do this BIOS update as well:
    http://download.lenovo.com/consumer/mobiles/5ecn96ww.exe
    Let me know if it works.
    Jonas
    Microsoft MVP: Windows Consumer Expert
    Yoga Tablet 2 10 || ThinkPad X1 Carbon (20A7007MPH) || ThinkPad Helix (3698-6EU) || IdeaCentre B540
    Twitter: @jonashendrickx

  • Problem with installing and uninstalling applicati...

    hi all,
    I have a problem with installing or uninstalling apps on 808. When i try to install an application through Nokia suite or when trying to run the application file from the phone's memory the screen freezes and becomes unresponsive but the 3 phone buttons work just fine. I have to shut down the phone and the screen becomes responsive again. Anything available to help me wiith this situations as I cannot use any of the apps I have. Any help much appreciated.
    Regards
    Alex

    You are not alone. Im also having the same issue because we do alot of install and uninstall apps. This is the bad point of symbian. But I tired to install the latest FP2 it will be slightly abit smoother now. So you have the latest version now but did you tired to restore any backup yet? It might be the setting on when you restore that affect it. The feezing should be shorten on FP2 but it will still remain there depending on the type of apps from what I experience.
    I hope they will provide multiple function to uninstall apps since it will go through a long process to uninstall apps 1 by 1.
    Reason is because some apps will go through process like preparing install, process install, finalising install which take away your control for that few seconds or a minute instead runnning in background mode. Its not convenient to uninstall more apps.

  • Problem with installing Elements - from noob

    I have problems with installing Elements, it gives my an unknown mistake - I already have CS4 up and running, could this be the case?

    Chances are not very good that pse 4 will run on os x 10 6.8 unless you were upgrading from an earlier mac version that already had pse 4 installed.
    as per this:
    http://forums.adobe.com/message/4474236#4474236

  • Problem with installing iTunes

    So these are my problems with installing iTunes.
    At first it was :
    A required iTunes component is not installed.Please repair or reinstall iTunes (-45019)
    Then it got worse as it would not even open and these would appear:
    The program can't start because AVFoundationCF.dll is missing from your computer. Try reinstalling the program to fix this problem.
    and this would appear:
    iTunes was not installed correctly. Please reinstall iTunes.
    Error 7 (Windows error 126)
    I reinstalled maybe about 5 times or more...
    If I thought I solved the above problem, this would appear:
    iTunesHelper.exe is not installed on my computer.
    I seen other people comment that you should unistall and restart the computer and install the setup again, but it does not work..
    And others would say to repair the AAS or iTunes etc..
    And after trying all these it does not work???
    What else works?

    I also tried repairing the Microsoft NET.

  • Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?

    Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?
    I have been trying to install Photoshop CS6 & CC and Acrobat Pro XI on my Mac Pro (late 2013). I keep getting a 'configuration' error message and wondered if the problem was wide spread.
    TIA,
    Jerry

    Thanks, Martin.
    Good to hear someone has had success. The lack of it here is frustrating and depressing.
    Thanks again,
    Jerry

  • Severe problem with installing and starting Audio-DVD Pla

    Hi,
    after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
    Any ideas?
    Best regards and thank in advance,
    PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

    Hi,
    after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
    Any ideas?
    Best regards and thank in advance,
    PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

Maybe you are looking for