Problem with installing solaris 10

hi.
I'm using Intel-based processor for my stand-alone computer running Windows XP Professional with a broadband connection.
As directed by one of the guys here, and also by my own research, I found the documentation for installing Solaris 10 on x86 based computers.
By navigating through the documentations:
'Solaris 10 Release and Installation Collection' >
'Solaris 10 Installation Guide: Basic Installations' >
'2. Installing With the Solaris Installation Program (Tasks)' >
'x86: Performing an Installation or Upgrade With the Solaris Installation Program'
I followed the instructions as stated in the documentations and set BIOS to boot from CD.
It didn't worked. My computer went on to boot from my Windows OS located in my hard disk. (CD is my first boot device in BIOS)
I have 4 CDs now for Solaris 10 installation.
Each of the CD has a ISO file respectively.
Please help!

One or more of the following:
(A) Your motherboard and/or CD-ROM drive do not actually allow booting from CD even though all of the settings seem to be set correctly. I've had this happen to me before. Try a different CD-ROM drive.
(B) Your CDs are written from bad ISO images.
(C) Your CD writing software does not properly create bootable CDs. If you use Windows, Nero is highly recommended.
(D) Your CDs were written too fast. Rewrite the CDs using the slowest speed that your CD writer will allow.

Similar Messages

Problem with installing Solaris Express Community Edition(Virtual Machine)

When I start my virtual machine to install Solaris Express Community Edition(X86 edition), it just displays an character interface
grub>
and there is no other useful information, so I don't know what to do next, does anyone can help?

Try seting "-jdkhome xxxxxxxxxx" in the ide.cfg file in your Forte \bin\ directory. Point it to the SDK install directory - that is, make "xxxxxxxxxx" the path to the SDK install.
You seem to be accessing a java.exe that is pointing to a location that is other than where jvm.dll is residing. This may get you to executing the correct java.exe.

Problems with installing solaris 10 on intel 915 GEV

Hi,
Any one can give the solution for my bellow hinderences
I am having intel 915 GEV ,3.0 GHz ,120 SATA ,512 DDR2,Microsoft USB optical Mouse, Sony DVD writer
I installed sol 10 , but unable to mount my dvd/cd Drive.
I am unable to configure graphics card using kdmconfig.
I tried with many options. But did not succeed.
Any solution ?

hi here is the resolution ..........
apply this patch
http://vishwasbc.livejournal.com/1134.html
not checked

Problem with installing and uninstalling applicati...

hi all,
I have a problem with installing or uninstalling apps on 808. When i try to install an application through Nokia suite or when trying to run the application file from the phone's memory the screen freezes and becomes unresponsive but the 3 phone buttons work just fine. I have to shut down the phone and the screen becomes responsive again. Anything available to help me wiith this situations as I cannot use any of the apps I have. Any help much appreciated.
Regards
Alex

You are not alone. Im also having the same issue because we do alot of install and uninstall apps. This is the bad point of symbian. But I tired to install the latest FP2 it will be slightly abit smoother now. So you have the latest version now but did you tired to restore any backup yet? It might be the setting on when you restore that affect it. The feezing should be shorten on FP2 but it will still remain there depending on the type of apps from what I experience.
I hope they will provide multiple function to uninstall apps since it will go through a long process to uninstall apps 1 by 1.
Reason is because some apps will go through process like preparing install, process install, finalising install which take away your control for that few seconds or a minute instead runnning in background mode. Its not convenient to uninstall more apps.

Problem with installing Elements - from noob

I have problems with installing Elements, it gives my an unknown mistake - I already have CS4 up and running, could this be the case?

Chances are not very good that pse 4 will run on os x 10 6.8 unless you were upgrading from an earlier mac version that already had pse 4 installed.
as per this:
http://forums.adobe.com/message/4474236#4474236

Problem with installing iTunes

So these are my problems with installing iTunes.
At first it was :
A required iTunes component is not installed.Please repair or reinstall iTunes (-45019)
Then it got worse as it would not even open and these would appear:
The program can't start because AVFoundationCF.dll is missing from your computer. Try reinstalling the program to fix this problem.
and this would appear:
iTunes was not installed correctly. Please reinstall iTunes.
Error 7 (Windows error 126)
I reinstalled maybe about 5 times or more...
If I thought I solved the above problem, this would appear:
iTunesHelper.exe is not installed on my computer.
I seen other people comment that you should unistall and restart the computer and install the setup again, but it does not work..
And others would say to repair the AAS or iTunes etc..
And after trying all these it does not work???
What else works?

I also tried repairing the Microsoft NET.

Problem with Installing Nokia Ovi Store in E51

I am having problem with installing nokia Ovi store in my E51. Whenever I try to download Ovi store from my E51, it shows a error message that the component is built in and cannot be installed. I dont know wat to do now. Can anyone please give me some advice. Thanks in advance.

Hi there!
This means that the Ovi Store is currently installed in your E52 phone, what I can suggest is try checking under Application Manager > Installed Application, check if the Ovi Store is there. If you can't see it, try to perform the soft reset (press *#7780# on the main screen of the phone and it will prompt you restore all original phone settings? phone will restart. Press YES and it will ask you for the lock code 12345.) If anything else please reply to this message.
Hope tis' Help!
"If you think this post is helpful, please click on the green button"

Problem with installing CUCM on MCS-7816-I5

Hi to all.
I have a problem with installing CUCM 8.6.1 on new MCS-7816-I5 (IBM) hardware. The problem is that installation loops in restart after upgrading MCS firmware. Actualy, installation does not sucessfully upgrade firmware, so every time it detects old firmware and trying to upgrade it.
I also tried update MCS firmware with downloaded Firmware Update Utility 3.6.5 CD from Cisco downloads, but it also fails.
Does anyone have idea what's going on? Is this a Cisco failure or IBM server failure?
Here is some details from log file generated with this Firmware Update Utility 3.6.5:
==============
Initial Selection
Machine Type: 4251 OS: SLES 10 Arch: 64 bit
IsPartition: 0
Update:   IBM System x uEFI update for x3200 M3 /3250 M3
Severity: Critical
Reboot:   Reboot Required to take effect
UpdateID: ibm_fw_uefi_gye142a_linux_32-64 Requisite:None
Version: 1.08 (GYE142A)
Install: 1.06 (GYE135A)
Select:    Yes
Update:   IBM Dynamic System Analysis
Severity: Recommended
Reboot:   Reboot Required to take effect
UpdateID: ibm_fw_dsa_3.20_dsyt75x_linux_32_64
Requisite:None
Version: 3.20 (DSYT75X)
Install: 3.01 (DSYT60K)
Select:    Yes
Update:   IBM Online SAS/SATA Hard Disk Drive Update Program
Severity: Critical
Reboot:   Not Required
UpdateID: ibm_fw_hdd_sas-1.08.01_linux_32-64
Requisite:None
Name:     WD2502ABYS-23B7A0 (/dev/sg0)
Version: 02.03B07
Install: 02.0
Select:    Yes
Update:   Integrated Management Module Update
Severity: Critical
Reboot:   Not Required
UpdateID: ibm_fw_imm_yuoo84c_linux_32-64 Requisite:None
Version: 1.22 (YUOO84C)
Install: 1.10 (YUOO57H)
Select:    Yes
IBM Command Line IMM Flash Update Utility v1.05.03 Licensed Materials - Property of IBM
(C) Copyright IBM Corp. 2009,2010 All Rights Reserved.
LAN-over-USB device not configured.
Error connecting to IMM using IP address 169.254.95.118.
Please verify the LAN over USB interface is configured properly and active.
Error flashing firmware: 3
IBM Command Line IMM Flash Update Utility v1.10.11 Licensed Materials - Property of IBM
(C) Copyright IBM Corp. 2009,2010 All Rights Reserved.
Refreshing LAN-over-USB IP address. This may take several minutes.
Attempting to discover the IMM(s) via SLP.
Error connecting to IMM using IP address 169.254.95.118.
Please verify the LAN over USB interface is configured properly and active.
Error flashing firmware: 10
(C) Copyright IBM Corp.2010. All Rights Reserved.
FdrvWL -- Flash Drive(s)                                     3.10.08.19
   1 Ada:0 SID:0   PN:44E9172:42C0463 SN:1J242783 FW:02.03B07              T:13 FW:Ok
AdaNbr(Type)      DevFnd Flashed(SAS SATA) NbrFailed
0(onBoard)           1       0   0    0          0
                       1       0   0    0          0 Error(s)
Update completed successfully. <-- THIS SUCCESS, BUT EVERY TIME IT UPGRADEING AGAIN FROM OLD VERSION, LIKE NEVER REALY UPGRADED TO NEWER VERSION
IBM Command Line IMM Flash Update Utility v1.10.11 Licensed Materials - Property of IBM
(C) Copyright IBM Corp. 2009,2010 All Rights Reserved.
Refreshing LAN-over-USB IP address. This may take several minutes.
Attempting to discover the IMM(s) via SLP.
Error connecting to IMM using IP address 169.254.95.118.
Please verify the LAN over USB interface is configured properly and active.
Error flashing firmware: 10
===========================
Thanks,
Sinisa.

Hi Sinisa,
It almost sounds like this bug;
CSCtn81201
Incorrect "Hardware Configuration Error" due to hardware setup errors
Symptom:
Refresh upgrade stops with IMM device detection, and then server being reported as unsupported
Conditions:
in-band USB interface was disabled, which is configurable via IBM system X or IMM (browser) interfaces.
Workaround:
change the in-band usb interface settings to enabled.
Related Bug
Status
Fixed
Severity
4 - minor
Last Modified
Aug 17,2011
Product
Cisco Unified Communications Manager (CallManager)
Platform
Dependent
Technology
nav
1st Found-in
8.6(0.99081.3)
Fixed-in
8.6(1.96000.1), 9.0(0.95070.38), 9.0(0.95070.39), 8.6(1.99989.1), 8.6(1.95050.1), 9.0(0.96000.1), 8.6(1.97011.2), 8.6(1.95190.40), 8.6(1.97011.1), 8.6(0.95180.9), 9.0(0.95010.1), 8.6(1.95020.1), 8.6(1.95040.1), 8.6(0.98000.50), 8.6(0.98000.17), 8.6(0.99981.2), 8.6(1.10000.1), 8.6(1.99986.1), 8.6(1.95020.58), 8.6(1.96000.51), 8.6(1.10000.43)
Cheers!
Rob

Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?

Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?
I have been trying to install Photoshop CS6 & CC and Acrobat Pro XI on my Mac Pro (late 2013). I keep getting a 'configuration' error message and wondered if the problem was wide spread.
TIA,
Jerry

Thanks, Martin.
Good to hear someone has had success. The lack of it here is frustrating and depressing.
Thanks again,
Jerry

Severe problem with installing and starting Audio-DVD Pla

Hi,
after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
Any ideas?
Best regards and thank in advance,
PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

Hi,
after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
Any ideas?
Best regards and thank in advance,
PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

Problems with installing HP OfficeJet Pro L7590 driver All-in-One

Hello HP team.
Having problem with installing driver for HP Officejet pro L7590.
Starting the process the process bar goes to the end 100% and then disappear.
After that nothing happens.
Rebooting doesn't help.
Windows 7-64

Thanks for getting back to me!
Lets try some more steps:
Uninstall, level 3 for HP PC or level 4 for non-HP PC.
1. Click Start and type %temp% in the run field and click OK.
2. Look for, and open the folder starting with 7z (Example: 7zS2356) (if there is more than one 7z folder, try the most recent one)
3. Open folder Util
4. Open folder CCC
5. Run the uninstall_ L4.bat for a non-HP PC or run the Uninstall_L3.bat for a HP PC
6. When the uninstall has completed restart the computer
Try to install again using the HP Printer Install Wizard for Windows
Let me know how this goes please
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

I have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this?

i have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this

Try downloading the trial. It ought to detect that you have a 64-bit system.
You aren't using Vista, are you? PSE 13 requires at least win 7 and I think a few folks with vista have gotten a similar error message on trying to install it.

Problem with install on new compy, something to do with external?

Hello, so I have been having a few problems with installing Arch on my new computer. On my old laptop I never ran into this problem on any distro of LINUX I installed, nor on any other of the systems I have installed Arch on. I believe it might have something to do with the fact that I am running the live cd off of an external dvd drive maybe? I am kind of stuck here, so any help would be greatly appreciated! Thanks!
If it helps
System Specs:
Motherboard: ASROCK 890FX Deluxe3
Processor: AMD Phenom II X4 955
Graphics Card: ATI Radeon HD 5700 Series
Hard Drives: 2 SATA 160gb hd RAID 0, and one 160gb ATA hd
OS: Windows 7 Professional on the RAID 0, hoping to put ARCH on the ATA (I have tried booting the ATA first in the list behind the USB DVDROM to no avail)
External Drive: Sony DVD/CD RW drive DRX-510UL
External DVDROM is the exact same drive I used to install windows 7 professional.
External DVDROM is plugged into one of my USB 2.0 ports, but the error still persists.
I am using the EXACT same disk I used when installing it on my past computer.
Trying to install x86_64 version of Arch, gets past the splash.
Output that I could catch:
:: Running Hook [archiso]
:: Rinning Hook [archiso_pxe_nbd]
:: Mounting tmpfs, size 75%... done.
:: Waiting for boot device...
Waiting 30 seconds for device /dev/disk/by-label/ARCH_201005 ...
usb 9-1 : device descriptor read/64, error-62
usb 9-1 : new full speed USB device using ohci_hcd and address 3
usb 9-1 : device descriptor read/64, error-62
usb 9-1 : device descriptor read/64, error-62
usb 9-1 : new full speed USB device using ohci_hcd and address 4
usb 9-1: device not accepting address 4, error -62
usb 9-1 : new full speed USB device using ohci_hcd and address 5
usb 9-1: device not accepting address 5, error -62
hub 9-0:1.0: unable to enumerate USB device on port 1
scsi 6:0:0:0: CDROM SONY DVDRW DRU-510A 1.0d PQ: 0 ANSI: 0
scsi 6:0:0:0: Attached scsi generic sg3 type 5
sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
ERROR: boot device didn't show up after 30 seconds...
Falling back to interactive prompt
You can try to fix the problem manually, log out when you are finished
/bin/sh: can't access tty; job control turned off
If you need any other info, I can grab it of course.
Last edited by crusniknano (2010-07-12 19:49:13)

K, got it running. was having errors with the USB hd, but just changed the name it booted from to the name of the drive. thanks!

Problem facing installing Solaris 10 on Dell inspiron 6400.

Hi,
I am facing problem in installing Solaris 10 on my Dell inspiron 6400.
It is giving "cannot find driver for screen device /isa/motherboard@1,61" error.
Please help...
Thanks In Advance
Saurabh

Hi all,
I've also the same problem, I tried the 11/06 but after GRUB , it hangs. HereBelow the HCL.
No Solaris Driver
     No Solaris Driver
     Multimedia
     Intel Corporation
     82801G (ICH7 Family) High Definition Audio Controller
No Solaris Driver
     No Solaris Driver
     Network
     Intel Corporation
     PRO/Wireless 3945ABG Network Connection
Solaris 10 11/06
     Solaris 10 11/06
     Firewire
     Ricoh Co Ltd
     Unknown device
     hci1394
Note-1
     Note-1
     Network
     Broadcom Corporation
     BCM4401-B0 100Base-TX
     bfe
Solaris 10 11/06
     Solaris 10 11/06
     Video
     Intel Corporation
     Mobile 945GM/GMS/940GML Express Integrated Graphics Controller
     vgatext
Solaris 10 11/06
     Solaris 10 11/06
     Storage
     Intel Corporation
     82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller IDE
     pci-ide
Solaris 10 11/06
     Solaris 10 11/06
     USB
     Intel Corporation
     82801G (ICH7 Family) USB UHCI #1
     uhci
Solaris 10 11/06
     Solaris 10 11/06
     USB
     Intel Corporation
     82801G (ICH7 Family) USB UHCI #2
     uhci
Solaris 10 11/06
     Solaris 10 11/06
     USB
     Intel Corporation
     82801G (ICH7 Family) USB UHCI #3
     uhci
Solaris 10 11/06
     Solaris 10 11/06
     USB
     Intel Corporation
     82801G (ICH7 Family) USB UHCI #4
     uhci
Solaris 10 11/06
     Solaris 10 11/06
     USB
     Intel Corporation
     82801G (ICH7 Family) USB2 EHCI Controller
     ehci

Problem while installing solaris 10 on HP proliant DL 380 G5.

Hi,
facing problem while installing solaris 10 05/09 on HP proliant DL 380G5. The array controller is E200.
i have installed the raid controller driver CPQary3-2.1.0-solaris10-i386, it is going ahead but not detecting the whole hard disk space. My hard disk space is SAS 146GB. There are two 146GB hard disk present. It is showing only 978 MB & only one hard disk. So please help me out. my mail ID is [email protected]

I have a similar issue trying to load Solaris 10u4 on an IBM x236.
I had to put in a recognized SCSI card, attach an external array to the card, and install Solaris 10u4 on the array. Then I had to install the correct driver from OpenSolaris (an Adaptec one for IBM ServeRAID), and do a live upgrade onto the now-visible internal disks. Then I removed the array and cleaned up the traces from the live upgrade.
You may have to do something similar.
And last month the boot drive got corrupted when power was interrupted. "Oops. Wrong plugs..." This time the external array will stay connected.

Problem with installing solaris 10

Similar Messages

Maybe you are looking for