Problem with Installing Trial of Flash CS5.5

I'm trying to install the trial version of Flash CS5.5. I have downloaded it with the Adobe Downloader without problems. However, when I try to install the program, it gives me an error. I am able to select the "trial" radio button and can accept the user agreement. When it tries to install, it gives me the following error message: "The Setup encountered an error(-1) during install. Please restart the machine and try again." I have restarted and tried to install the software several times without success.
Thanks in advance for any suggestions.

DancingCavy9 the advantage of setting up a new administrator account is that account has fresh permissions assigned to it. This is why it is a recommended form of troubleshooting.
The install logs document will allow you to review the install logs. Alternately if you would like to run the Adobe Support Advisor, select the option to Package for Support, and respond to this thread with your token number I would be happy to review your install logs.

Similar Messages

Problems with deco brush in Flash CS5?

Hello,
When I try to use the deco brush in CS5 some of the properties are not there to tweak. For instance when I try to flower brush it creates flowers but the advanced options are not changable. The categories such as Flower color, Flower size, Leaf color Leaf size and Fruit color are there but there are no options to change any of these. The same issue happens with the lightning brush, the Tree brush, the smoke brush, the decorated brush, the fire brush and just about any brush except for the grid brush which has options to use a symbol. Is there something I am doing wrong? Is there a way to get the settings to be invoked? Is it just broken?

Nevermind... I restarted Flash and it miragically appeared! Yay CS5!

Problem with installing Flash Player 10 RC

Hello
I have some problem with installing Flash Player 10 RC. When
I try to do it I have error:
"Error opening file: C:\WINDOWS\system
32\Macromed\Flash\NPSWF32.dll". Why ?
Regards

Does it have any solution ?

Problem with install Premiere Elements 12 trial version

Dear support
I have a little problem with install Adobe Premiere Elements 12 (trial)
During the installation I get the message (in German) Während der Installation des folgenden Produkts ist ein Fehler aufgetreten: . Starten Sie Ihr System neu und versuchen Sie es erneut.
I installed the SW in two different notebooks. Unfortunately I get the same message on both notebooks.
Below I have make some print screens during the installation and the error message.
second picture is the error message.
Could you help me in this case what I can to do?
Thanks in advanced for you support.
Best regards
Murat Tan

Try the basic troubleshooting steps :
Enable the hidden Admin Account on Windows 7 ( Ref : http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-adminis trator-account-on-windows-vista/ )
--> It’s already enabled
Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-servic es-windows.html )
--> I have disabled it.
Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
--> I have disable it.
Reboot and Install in the enabled Administrator account and check.
Murat Tan
PC-Supporter/Telecom
Kistler Instrumente AG
Eulachstrasse 22, 8408 Winterthur, Switzerland
Direct +41 52 2241 911, Main Office +41 52 224 11 11
[email protected]<mailto:[email protected]>, www.kistler.com
Confidentiality Notice:
This e-mail is privileged and confidential and for the use of the addressee only. Should you have received this e-mail in error please notify us by replying directly to the sender or by sending a message to [email protected] Unauthorised dissemination, disclosure or copying of the contents of this e-mail, or any similar action, is prohibited.

Problems with installing CS5 extended

Hi, I'm in the process of setting up a new computer and had no problems with installing Lightroom but installing photoshop CS5 is proving to be a real pain. At first it refused to install itself and after many hours of trying it finally did but then I found out I needed to update camera raw so I downloaded that but that one now is refusing to install itself. At first it told me the Applications manager needed to be updated so I did that and still it refuses to install itself. I have tried to get help from Adobe but not a single person is responding to my requests for help so I am now trying the forums so does anyone know what is going on with it?
Thanks!

Do a search on adobe's site for the specs of cs5 and make sure your system will support it. Also see if your OS is listed as being supported. It is possible that cs5 is too old for your system.
For now all we can do is guess. Maybe someone else will have an idea.

Problem with installing Photoshop elements 9 and adobe support advisor

Hi, I've received a graphic tablet with 2 programs: the first has been downloaded and works perfectly while the second, PSE9, has been giving me problems for at least a week!
I downloaded it and now I have a winzip file full of strange things (one of this is set up exe which tells me that I have to install adobe support advisor) and two files which said 3DF.tmp and PSEP9(1).zip.download and if I try to click them they tell me that I have to find on the Net the program to open them because I can't. And I don't know which program is required.
I tried a lot of times to download the adobe support advisor, I have enough space on my disc and my farewall is deactivated, but when the program begins I saw this annoyant message
cpsid_82829s5 Missing installation file bootstrapper error occured
with this code for a support from adobe 00-67325-032018052012
I unistalled it and retried, but nothing.
Please, I just want to use my tablet with the programs which are comprised in the package, why it's so difficult to download this damn photoshop elements 9????????????
Thank you

In the error message it doesn't tell me
"Installer has detected that a machine restart is pending. It is recommended that you quit the installer, restart try again,"
neither "Installer failed to initialize. File not found. Please download Adobe Support Advisor to detect the problem."
and I have enough space and I have Windows xp then I should be able to install it. I tried to unistall and install again the support advisor but nothing. I'm desperate.
Messaggio originale----
Da: [email protected]
Data: 18/05/2012 22.20
A: "Questionlady"<[email protected]>
Ogg: Problem with installing Photoshop elements 9 and adobe support advisor
Re: Problem with installing Photoshop elements 9 and adobe support advisor created by Jeff A Wright in Trial Download & Install FAQ - View the full discussion
Did you try the steps listed in http://helpx.adobe.com/creative-suite/kb/troubleshoot-error-messages-b ootstrapper-cs5.html which was identified by the Adobe Support Advisor? If so can you please list each step and the result of those steps. This will allow us to best advise you on your next steps.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4420419#4420419
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4420419#4420419. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Trial Download & Install FAQ by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Problem with installing CUCM on MCS-7816-I5

Hi to all.
I have a problem with installing CUCM 8.6.1 on new MCS-7816-I5 (IBM) hardware. The problem is that installation loops in restart after upgrading MCS firmware. Actualy, installation does not sucessfully upgrade firmware, so every time it detects old firmware and trying to upgrade it.
I also tried update MCS firmware with downloaded Firmware Update Utility 3.6.5 CD from Cisco downloads, but it also fails.
Does anyone have idea what's going on? Is this a Cisco failure or IBM server failure?
Here is some details from log file generated with this Firmware Update Utility 3.6.5:
==============
Initial Selection
Machine Type: 4251 OS: SLES 10 Arch: 64 bit
IsPartition: 0
Update:   IBM System x uEFI update for x3200 M3 /3250 M3
Severity: Critical
Reboot:   Reboot Required to take effect
UpdateID: ibm_fw_uefi_gye142a_linux_32-64 Requisite:None
Version: 1.08 (GYE142A)
Install: 1.06 (GYE135A)
Select:    Yes
Update:   IBM Dynamic System Analysis
Severity: Recommended
Reboot:   Reboot Required to take effect
UpdateID: ibm_fw_dsa_3.20_dsyt75x_linux_32_64
Requisite:None
Version: 3.20 (DSYT75X)
Install: 3.01 (DSYT60K)
Select:    Yes
Update:   IBM Online SAS/SATA Hard Disk Drive Update Program
Severity: Critical
Reboot:   Not Required
UpdateID: ibm_fw_hdd_sas-1.08.01_linux_32-64
Requisite:None
Name:     WD2502ABYS-23B7A0 (/dev/sg0)
Version: 02.03B07
Install: 02.0
Select:    Yes
Update:   Integrated Management Module Update
Severity: Critical
Reboot:   Not Required
UpdateID: ibm_fw_imm_yuoo84c_linux_32-64 Requisite:None
Version: 1.22 (YUOO84C)
Install: 1.10 (YUOO57H)
Select:    Yes
IBM Command Line IMM Flash Update Utility v1.05.03 Licensed Materials - Property of IBM
(C) Copyright IBM Corp. 2009,2010 All Rights Reserved.
LAN-over-USB device not configured.
Error connecting to IMM using IP address 169.254.95.118.
Please verify the LAN over USB interface is configured properly and active.
Error flashing firmware: 3
IBM Command Line IMM Flash Update Utility v1.10.11 Licensed Materials - Property of IBM
(C) Copyright IBM Corp. 2009,2010 All Rights Reserved.
Refreshing LAN-over-USB IP address. This may take several minutes.
Attempting to discover the IMM(s) via SLP.
Error connecting to IMM using IP address 169.254.95.118.
Please verify the LAN over USB interface is configured properly and active.
Error flashing firmware: 10
(C) Copyright IBM Corp.2010. All Rights Reserved.
FdrvWL -- Flash Drive(s)                                     3.10.08.19
   1 Ada:0 SID:0   PN:44E9172:42C0463 SN:1J242783 FW:02.03B07              T:13 FW:Ok
AdaNbr(Type)      DevFnd Flashed(SAS SATA) NbrFailed
0(onBoard)           1       0   0    0          0
                       1       0   0    0          0 Error(s)
Update completed successfully. <-- THIS SUCCESS, BUT EVERY TIME IT UPGRADEING AGAIN FROM OLD VERSION, LIKE NEVER REALY UPGRADED TO NEWER VERSION
IBM Command Line IMM Flash Update Utility v1.10.11 Licensed Materials - Property of IBM
(C) Copyright IBM Corp. 2009,2010 All Rights Reserved.
Refreshing LAN-over-USB IP address. This may take several minutes.
Attempting to discover the IMM(s) via SLP.
Error connecting to IMM using IP address 169.254.95.118.
Please verify the LAN over USB interface is configured properly and active.
Error flashing firmware: 10
===========================
Thanks,
Sinisa.

Hi Sinisa,
It almost sounds like this bug;
CSCtn81201
Incorrect "Hardware Configuration Error" due to hardware setup errors
Symptom:
Refresh upgrade stops with IMM device detection, and then server being reported as unsupported
Conditions:
in-band USB interface was disabled, which is configurable via IBM system X or IMM (browser) interfaces.
Workaround:
change the in-band usb interface settings to enabled.
Related Bug
Status
Fixed
Severity
4 - minor
Last Modified
Aug 17,2011
Product
Cisco Unified Communications Manager (CallManager)
Platform
Dependent
Technology
nav
1st Found-in
8.6(0.99081.3)
Fixed-in
8.6(1.96000.1), 9.0(0.95070.38), 9.0(0.95070.39), 8.6(1.99989.1), 8.6(1.95050.1), 9.0(0.96000.1), 8.6(1.97011.2), 8.6(1.95190.40), 8.6(1.97011.1), 8.6(0.95180.9), 9.0(0.95010.1), 8.6(1.95020.1), 8.6(1.95040.1), 8.6(0.98000.50), 8.6(0.98000.17), 8.6(0.99981.2), 8.6(1.10000.1), 8.6(1.99986.1), 8.6(1.95020.58), 8.6(1.96000.51), 8.6(1.10000.43)
Cheers!
Rob

I have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this?

i have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this

Try downloading the trial. It ought to detect that you have a 64-bit system.
You aren't using Vista, are you? PSE 13 requires at least win 7 and I think a few folks with vista have gotten a similar error message on trying to install it.

Problem with installing Lightroom 5 on Mac OS 10.8

Hi, i've got a problem with installing the trial version of Lightroom 5 on my mac OSX 8. When using the installing programm there is mentioned a Java script Problem. I use an old CS3 Photoshop Version. Does anybody know how to fix this problem...? Thank you...

Try below steps
Quit Lightroom
navigate to MAc HD > Library > Application Support > Adobe > Ligtroom
Delete Lightroom 5 install cookie file
then relaunch and check
it should work.
If you are still facing the issue, uninstall Lightroom 5
redownload it from http://www.adobe.com/support/downloads/product.jsp?product=113&platform=mac
then insall it

Hi guys, problem with grey screen and flashing question mark. on top of it while in utility, i'm unable to verify, verify disc permission or repair disc0 which is obviously my main hd. any ideas where to go from here? tried to reistall osx but no luck.

hi guys, problem with grey screen and flashing question mark. should be straight forward affair but on top of it while in disc utility, i'm unable to verify, verify disc permission, repair or even erase disc0 which is obviously my main hd. any ideas where to go from here? tried to reinstall osx but no luck, stucked when asked to chose location to install osx. would really apreciate any kind of help with this cause i'm quite new mac user. ty

If you don't have a backup, read this:
https://discussions.apple.com/docs/DOC-1689

Has anyone experience problems with loading the latest Flash Play?

Has anyone experienced problems with loading the latest Flash Player? I have done this several times and the same results come up - Install the latest Flash Player. I run Microsoft Vista.

What is your browser? If IE see
http://forums.adobe.com/thread/885448
http://forums.adobe.com/thread/867968

Problem with installing and uninstalling applicati...

hi all,
I have a problem with installing or uninstalling apps on 808. When i try to install an application through Nokia suite or when trying to run the application file from the phone's memory the screen freezes and becomes unresponsive but the 3 phone buttons work just fine. I have to shut down the phone and the screen becomes responsive again. Anything available to help me wiith this situations as I cannot use any of the apps I have. Any help much appreciated.
Regards
Alex

You are not alone. Im also having the same issue because we do alot of install and uninstall apps. This is the bad point of symbian. But I tired to install the latest FP2 it will be slightly abit smoother now. So you have the latest version now but did you tired to restore any backup yet? It might be the setting on when you restore that affect it. The feezing should be shorten on FP2 but it will still remain there depending on the type of apps from what I experience.
I hope they will provide multiple function to uninstall apps since it will go through a long process to uninstall apps 1 by 1.
Reason is because some apps will go through process like preparing install, process install, finalising install which take away your control for that few seconds or a minute instead runnning in background mode. Its not convenient to uninstall more apps.

Problem with installing Elements - from noob

I have problems with installing Elements, it gives my an unknown mistake - I already have CS4 up and running, could this be the case?

Chances are not very good that pse 4 will run on os x 10 6.8 unless you were upgrading from an earlier mac version that already had pse 4 installed.
as per this:
http://forums.adobe.com/message/4474236#4474236

Problem with installing iTunes

So these are my problems with installing iTunes.
At first it was :
A required iTunes component is not installed.Please repair or reinstall iTunes (-45019)
Then it got worse as it would not even open and these would appear:
The program can't start because AVFoundationCF.dll is missing from your computer. Try reinstalling the program to fix this problem.
and this would appear:
iTunes was not installed correctly. Please reinstall iTunes.
Error 7 (Windows error 126)
I reinstalled maybe about 5 times or more...
If I thought I solved the above problem, this would appear:
iTunesHelper.exe is not installed on my computer.
I seen other people comment that you should unistall and restart the computer and install the setup again, but it does not work..
And others would say to repair the AAS or iTunes etc..
And after trying all these it does not work???
What else works?

I also tried repairing the Microsoft NET.

Problem with Installing Nokia Ovi Store in E51

I am having problem with installing nokia Ovi store in my E51. Whenever I try to download Ovi store from my E51, it shows a error message that the component is built in and cannot be installed. I dont know wat to do now. Can anyone please give me some advice. Thanks in advance.

Hi there!
This means that the Ovi Store is currently installed in your E52 phone, what I can suggest is try checking under Application Manager > Installed Application, check if the Ovi Store is there. If you can't see it, try to perform the soft reset (press *#7780# on the main screen of the phone and it will prompt you restore all original phone settings? phone will restart. Press YES and it will ask you for the lock code 12345.) If anything else please reply to this message.
Hope tis' Help!
"If you think this post is helpful, please click on the green button"

Problem with Installing Trial of Flash CS5.5

Similar Messages

Maybe you are looking for