Problem with instant message in clustered environment

Hello, I have some problem with Instant Message service.
We need to use it in our Production Environment (a clustered emvironment with a central instance, two dialog instances and two web dispatchers), some months ago we tested it in Development Environment (not clustered emvironment, just a single system) and it worked fine.
So I did the same configurations on Production Environment but it did not work.
But if I access on my portal (Production Env.) by the central instance (avoiding the dispatchers) the instant message service works.
I think it can be a web dispatcher's configuration problem, in its logs I found the message :
"[Thr 3700] *** ERROR => htmlEncode: called with empty string [icpif.cpp 847]"
I' ve repeated the same configuration done in Dev.Env. (no dispatcher) on the Prod.Env. (with 2 dispatcher), is possible that I'm missing some configurations??
Could someone helps me?
Best Regard
null

Hi Alessandro,
unfortunately I got the same problem but I haven't found the solution yet.
Hoping someone will help us.
Regards Nicola

Similar Messages

Problem with Instant Messaging

Suddenly today while I was chatting (IM) on Skype with friends I wasn't able to send them anymore IMs. I don't have a problem to send IMs to the rest of the friends in my contact list, which were not active at the moment when my troubles started. I sign out and in few times, restarted my laptop, uninstalled and installed again Skype. Nothing worked! Please, somebody tell me is it a Skype software problem, or what? Thank you in advance!
milla68

Yes, all of that I have done....And still not giving me any alerts notifying me of a new IM....Is it because my wife's cell phone and MY cell phone are on the same account? We have different cell phone numbers so that shouldnt matter, I would think....

Problems with Instant Messaging v6.1 configure

Hi,
When I exec IM's configure program on our Solaris 8 system
ldapmodify fails:
Adding IM and Presence services LDAP schema
Failed to add IM and presence schema - error 137
ld.so.1:/usr/bin/ldapmodify: fatal: libsasl.so failed: No such file or directory.
libsasl.so is present in /usr/lib/mps
TIA
Shaun McCullagh
marviQ
Amsterdam

I'm not sure what the answer is. I'd be curious what the
following shows:
% grep ldapmodify /var/sadm/install/contents
..and..
% ldd /usr/bin/ldapmodify
Also, for good measure:
% pkgparam -v SUNWlldap

I have two Iphones with different email addresses sharing one Apple ID. Will that cause problems with using messaging and FaceTime?

I have two Iphones 5 with different email addresses sharing one Apple ID account.Both are using IOS 8.
I would like to set up a new Apple Id for one of the phones and remove it from the old account.
If I do that, can I move all of the purchased apps and songs to the new Apple account?
Also, will sharing one Apple ID account with two devices cause problems with using messaging and FaceTime?

Sharing an iCloud account between two devices can be done without causing issues with iMessage and FaceTime, just go into Settings for each of these functions and designate separate points of contact (i.e. phone number only, or phone number and unique email address). While that works, you'll then face the problem where a phone call to one iPhone will ring both if on the same Wi-Fi network -- but again, that can be avoided by changing each phone's settings.
Rather than do all that, don't fight it -- use separate IDs for iCloud. You can still use a common ID for iTunes purchases (the ID for purchases and iCloud do not have to be the same) or you can use Family Sharing to share purchases from a primary Apple account.

Problem with Nokia Messaging on my N97 (V22)

Since afew weeks I have a strange problem with Nokia Messaging on my N97.
I receive emails using Nokia Messaging (V10.2.26) with a date shown incorrect as 01.01.0000 and the email then can’t be opened/read.
This happens either on 3G connection as well as WLAN and it seems to be by random, not only HTML-emails or emails with text only.
I have uninstalled Nokia messaging already and reinstalled V10.1.24 but the problem still remains.
Is there any idea how to fix this issue because it is quite annoying and I can’t use the full functionality of my cell phone?

millic wrote:
ceroberts75, I remember from your other posts somehow server thinks you already have an account with the email you are trying to configure and you/nokia support is not able to get access to it. Different people have resolved this issue in different ways. For me it was just another way. Thought it might help someone.
absolutely m8. thats why i gave you a kudos.
the challenge is that NM has been unruly as of late...and believe when i say that i have literally been on the phone teching nokias support up to tier 2 and creating, canceling, trying new acounts with different email, different ways of creating them, with wifi, gprs...and praying for hours accross mutliple phone calls
but to no avail, are the devices we are using connecting and syncing...even with thier n900 specialist which i had to help him! lmao.
another option for a solution is alwayhs welcome as there are more then one way to skin a cat.
i hope it works for him and others as i kno9w thesome that are just giving up on it.

When attempting to use Firefox email, I get a yellow background popup headed ' There is a problem with this message.

when i attempt to open Firefox Mail, I get a popup (yellow background) with the heading "There is a problem with this message". We are sorry, but Yahoo Mail has encountered a temporary problem, referring to Temporary Error 4. It goes on to suggest that I might solve the problem by going to Yahoo Help Page. I tried this to no avail. Can you help? Please keep it simple as I am sort of computer impaired. Thanks, Bob Mayfield

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
*https://support.mozilla.org/kb/clear-cache-history-and-personal-information

I keep having the same problem with my messages over and over again. My number is not checked in my message settings it just unchecks itself

I keep having the same problem with my messages over and over again. My number is not checked in my message settings it just unchecks itself

Dear Tomarshe
I had the same problem a couple of weeks back.
What I did was that I restarted that Ipad of mine and voila!
Problem solved!
hope this helped!
- DASHdotDASHdot

TS3276 Does anyone have problems with sent messages not showing in their Mail? I have two sent folders when really I only want one. Any tips?

Does anyone have problems with sent messages not showing in their Mail? I have two sent folders when really I only want one. Any tips?

Not sure if this is a fix, but I tried sending myself a test email from only the Bcc field, and lo and behold it now shows the Bcc field in all sent item previews;
...maybe leaving the 'To' field blank on purpose forced Mail to show it.
Rebooted the Mail program, still there - rebooted the machine, still there. Hope this is still relevant and it works for you too - J.

Having problems with a message saying a script in this movie is causing adobe to run slowly if it continues to run, your computer may become unresponsive

Having problems with a message saying,A script in this movie is causing adobe flash player to run slowly if it continues to run, your computer may become unresponsive. Do you want to abort script. And my system seems to freeze. What can I do

Here is the download page for Click-to-PlugIn:
http://hoyois.github.com/safariextensions/clicktoplugin/

Database connectivity problem with instant client.

Guys,
I've installed the Oracle instant client basic and ODBC files in my system.
But when I create a system DSN and test the connectivity my database connectivity,it fails with
ORA-12637:Packet receive failed error
My TNSNAMES reads below:
ONDSP101.DIGITALINDIASW.NET =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = namesrv1.xy.zz.com)(PORT = 1522))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ONDSP101)
and my SQLNET as below:
AUTOMATIC_IPC = OFF
TRACE_LEVEL_CLIENT = ON
SQLNET.INBOUND_CONNECT_TIMEOUT=20
NAMES.DEFAULT_DOMAIN = na.pg.com
NAME.DEFAULT_ZONE = na.pg.com
SQLNET.CRYPTO_SEED = "kdg:9yv2$-plo*u6b2x!"
NAMES.DIRECTORY_PATH = (ONAMES,TNSNAMES)
NAMES.PREFERRED_SERVERS =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = TCP.xy.zz.com)
(PROTOCOL = TCP)
(Host = namesrv1.xy.zz.com)
(Port = 1522)
(ADDRESS =
(COMMUNITY = TCP.xy.zz.com)
(PROTOCOL = TCP)
(Host = namesrv2.xy.zz.com)
(Port = 1522)
I've placed my TNSNAMES and SQLNET file in the same folder having the instant client files and I've set my TNSADMIN,LD_LIBRARY_PATH and PATH environmental variable to the folder location.
Note:I'm able to connect to the database using SQLplus.
Thanks,
Bhagat

12637, 00000, "Packet receive failed"
// *Cause: A process was unable to receive a packet from another process.
// Possible causes are:
// 1. The other process was terminated.
// 2. The machine on which the other process is running went down.
// 3. Some other communications error occurred.
// *Action: If the cause is not obvious, contact Oracle Customer Support.
These days I very seldom use ODBC for Oracle - most recently it was simply to get Enterprise Architect to "talk" to Oracle. I never used it for my client applications (unlike in the fast distant past), so what I know about ODBC is seriously outdated.
Even so, a few comments. :-)
Have you tried creating a user DSN, in case a system DSN somehow works different environment wise?
The above error description sounds like the original TCP connection was successful (i.e. it is not a host unknown or not reachable error). Subsequent packets seem to fails.
To confirm, run the listener on namesrv1.xy.zz.com with logging enabled and have a look at the listener.log - does it show a connection being accepted/handled from your PC when you use the ODBC DSN?
Have you tried the Oracle ODBC drivers? When getting EA connected I had problems (also with Instant Client) and Microsoft ODBC driver for Oracle. Downloaded and installed the Oracle ODBC driver and it worked just fine first time around.
PS. You should raise this topic on the Instant Client Forum instead.

Porblem with Instant Messaging

Hello,
When I'm sending a Instant message from the collaboration launch pad I cannot view my message but the other person can view my message. when he is sending me a message he can view his message but I cannot view my message. Can anyone help me where is the problem.
Regards,
Murali.

Hi Murali,
Could it be that another client is logged in to the system with your username? In such case, IM capabilities will be prevented from you.
Please try the following:
Verify that a popup blocker is disabled on your browser.
Logout from the Portal
Login again with your username.
After login - did you get a "You are already logged in" message? - if so, this means there is another open browser with your username, and that is the reason for the problem.
Otherwise, I would recommend open a CSN.
Best Regards,
Oren.

PROBLEM with iMessage (Messages) on iPod touch HELPPP

We had a problem with iMessage. We're both using iPod touch with iOS5 version.
but we can't send messages. It says our emails/apple ids are not registered on iMessage.
I checked it on already on the Settings>iMessage> ON .
but still we cant use it. HELP PLEASE THANKS

Same isue when tryn to change advanced setting :
+Mon Jul 5 15:51:39 iPhone profiled[266] <Warning>: profiled|Service starting...+
+Mon Jul 5 15:51:39 iPhone profiled[266] <Warning>: MC|Profile MCConfigurationProfile 0x113b30 has no friendly name.+
+Mon Jul 5 15:51:41 iPhone ReportCrash[267] <Notice>: Formulating crash report for process profiled[266]+
+Mon Jul 5 15:51:42 iPhone com.apple.launchd[1] (com.apple.managedconfiguration.profiled[266]) <Warning>: (com.apple.managedconfiguration.profiled) Job appears to have crashed: Bus error+
+Mon Jul 5 15:51:42 iPhone ReportCrash[267] <Error>: Saved crashreport to /var/mobile/Library/Logs/CrashReporter/profiled2010-07-05-155139iPhone.plist using uid: 0 gid: 0, synthetic_euid: 501 egid: 0+
Did you solved this issue ?
Message was edited by: lbarbisan

Problem with Text Messages

Hi,
I have a 5530 XpressMusic phone with around 4000+ text messages saved on the memory card.
Whenever the number of text messages increases above approximately 3500+ messages, the new text message alert stops appearing, no tone or vibration alerts. Even delivery reports refuse to appear.
Nokia PC Suite (Latest version) has a lot of trouble displaying those texts as well (So that I could backup the data) and nothing appears in Communication Center.
I had the exact same problem with the older N70 ME and had to delete texts to get back to normal. Its going to be very cumbersome to go through all those messages and pick and prune to a size that the phone/Suite can handle.
I have the latest firmware. Any help with this?

ok this isn't any help sorry,but can't find anywhere to post a new thread,so this is the closest post i've found so hopefully i can get some help here :robotmad:
   when i have "backed up" my messages from the phone to my memory card AND picked my memory card as the place where my messages are stored,i put the memory card into my pc to browse the memory card i cannot find anything on there relating to the back up or my messages,i've gone through all the folders i can see,even the empty ones(btw do i need keep the empty folders or can i delete them),now this is really "bugging" me as my little lad sent me a merry christmas text message so i wanted to do the above action so i could save the message on my pc as a keeps sake
         hope you guys can help
          thanx a lot

Problems with instant play in some browsers

This is not a problem with how Safari works, but I thought someone here might help me with a frustrating problem for which I can find no solution.
I created several web pages with embedded QuickTime movies in mp4 format. They are constructed so that the movies begin instantly to play as soon as the pages are accessed. This has worked for the past couple of years regardless of which browser was used ( Mac versions of Safari, Firefox versions <4.x, Sunrise and others; Windows versions of Internet Explorer and Firefox).
It has recently been brought to my attention that this functionality is broken when updating to Firefox 4.x for Mac or when using Chrome for Mac. Using either of these browsers to access the pages results in a static page with no video play. The user must wait 1-2 minutes for the video to completely download and then it will automatically play. Since the movies play fine on multiple browsers, including the new Firefox 4.x for Windows, it seems to me that the problem is not in how the movies were coded but rather in how the browsers handle the html code for the pages.
The movies were edited in FCP, exported to Compressor, processed as mp4 streaming video and then embedded in web pages using Freeway Pro software with the "auto play" option enabled.
Any ideas will be appreciated.
John
a sample page is: http://lccut.org/videofiles/gospelvideo6high.html

Here's the response I got from Freeway Pro support:
Hi John
There seems to be an issue at the moment with the way that Firefox 4 (and to a certain extent Chrome) handles QuickTime movies. If you go to the test page on our site at <http://users.softpress.com/keith/firefox4test/> you'll see that it is very erratic in what it shows and how it plays - but note that you may need to wait a while in between clicking on Firefox 4's Refresh button to see that the results change from one refresh to the next.
Freeway is certainly publishing the code correctly, so this is does not appear to be a Freeway issue - though we would like to get to the source of the problem so we can advise customers on the best options to fix things. If you Google for "firefox4 quicktime movie problem" (without the quotes) you will see that this is not a problem specific to Freeway users.
Leopard users report that Firefox 4 displays and plays QT movies fine, but Snow Leopard seems to have problems. This may be due to the way that QuickTime and Firefox 4 play together, as Leopard and Snow Leopard use slightly different versions of QuickTime.
You should, however, be aware that non-Mac users will always need to download the QuickTime plug-in (which many PC users are reluctant to do, and some may not be allowed to by their IT department) for them to be able to see the movies play. The only truly universal method for offering video content on a web page is to use Flash .flv files and then use the FLV Player Action so that iPhone/iPad users will see an alternative (non-Flash) movie which is created by the Action. See the movie tutorial at <http://www.softpress.com/support/tutorials> (Episode 14) for details of how to set this up.
As soon as we find a workaround for the problems with Firefox 4 and Chrome, we will put up an article on our KnowledgeBase at <http://www.softpress.com/kb/>. It might be that Firefox and Chrome will release a new update soon to fix the problem, in which case we will tell you which version you need to download an install.
Best regards
So the FW people insist that there software is encoded the pages properly and it is the fault of the newer Mac browsers causing the error.
John

Problem with information message in User exit

Hi All,
Iam using the below code in MV45FZZ to check the customer(sold to party) entered in VA31 with a Ztable and popup a message if it exist in the Ztable.
select single * from zcust into zcust where kunnr = kuagv-kunnr.
if sy-subrc = 0.
call function 'POPUP_TO_INFORM'
 exporting
titel = 'INFORMATION'
txt1 = 'Calender day orders for this customer have been blocked'
txt2 = 'Please contact [someone] if this block should be removed'
 TXT3 = ' '
 TXT4 = ' '
 exceptions
 others = 1.
if sy-subrc = 0.
leave to screen 101.
endif.
endif.
The problem is, the message needs to be in logon language based.
I tried to give it in a text element, however it is asking me a access key to enter it in a text element. Also I tried to give just a information message box like this message I088(z2). But this is comming like a success message . Letme know how to overcome this.
Regards,
Senthil

Hello,
I have gave similar kind of info message in the same exit like this
 message i082(Z48SD) with l_r_xvbap-posnr
 l_r_xvbap-matnr
 text-302.
Text-302 is created for the same program SAPMV45A
U could try like this.
If useful reeward.
Vasanth

Problem with instant message in clustered environment

Similar Messages

Maybe you are looking for