Problem with Integerating Microsoft Exchange server as Webdav Repository
Hi all
We are using MS Outlook 2000.
I created an HTTP system with the exchange server domain name and the corresponding user id and password required for authentication.
Then i created the Repository Manager using WebDav Repository template.But when I go to component monitoring it gives error in the server as server not connected.
How to rectify the error?
hi,
Have you set the protocol to SMTP.
You have to create a system alias for the exchange server. have you done with it?
See this link
http://help.sap.com/saphelp_nw04/helpdata/en/1d/3d59fdaa5ebb45967ea107d3fa117a/frameset.htm
regards,
Ganesh.N
Similar Messages
-
Can someone help with my Mail not working with my Microsoft Exchange server?
I am trying to set up my Mail account. I am using the Microsoft Exchange server. I've been using Entourage, but wanted to switch to using the Mac's Mail. I used the same settings I had with Entourage, but with Mac Mail I'm getting this error: MFEWSErrorDomain error 56. From some of the other posts I saw, it seems as though no one has any answers, but I figured I'd ask anyway.
There is no single cause of this problem and hence no single solution. There are several suggestions in this thread, if you haven't come across it, one of which might help:
https://discussions.apple.com/thread/3953623?start=0&tstart=0
Regards. -
Using iPhone with a Microsoft Exchange Server
Hi
Is it possible to connect the iphone to a Microsoft Exchange Server to access your emails?
ThanksRyan Simmons,
Exchange's ActiveSync protocol which requires licensing a propietary protocol from Microsoft is what you are asking for.
IMAP is one additional port open, and can be encrypted with SSL. If they are concerned about an additional port open, VPN is an option. Then only when the VPN is active will the corporate email be available. The other argument that has been advanced on security is on Windows Mobile devices the server can ask for remote wipes of data from the phone. The iPhone only caches emails, and goes back to the server to download them again when you go to view them again. If you change the password for the account on the server, the same results occur - the email is not available on the device the next time that account is accessed from the iPhone.
This article contains an outline of the things needed on the server to support:
http://docs.info.apple.com/article.html?artnum=307313
This article outlines the VPN protocols supported by the iPhone:
http://docs.info.apple.com/article.html?artnum=305723
Hope this helps,
Nathan C. -
I have an Exchange server configured to require a client certificate. Is there a way to configure a certificate for Apple Mail/Address Book/Calendar ? There seems to be no option in the account settings to do that (in contrast to for example the IMAP settings).
Any help highly appreciated !I don't know. Try downloading the certificate and installing it in your keychain. See what happens.
-
IPhone 6 setup in Microsoft Exchange Server
Currently there is one cell phone in our office set-up on the
Microsoft Exchange Server. It can receive e-mails but cannot always send e-mails from the cell phone. Recently, we tried setting-up an iPhone
6 with the Microsoft Exchange Server and it can send an e-mail from the iPhone; but cannot receive e-mails on the iPhone. Also, the e-mails sent from the iPhone, do not show-up on the user's desktop. Please
help.<o:p></o:p>Regarding the one that can't send, what happens when they try?
Regarding the one that doesn't show up in the desktop machine, what client is in use on the desktop machine, what version and service pack, and how is it configured to connect?
And what version, service pack and rollup or cumulative update is installed on the Exchange server?
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems." -
Syncing ACT contacts while on automatic wireless syncing with Microsoft Exchange Server?
Does anyone know if this is possible? At the moment, my company is automatically performing a wireless sync between Outlook contacts and their Blackberry Curve 8330 devices. However, employees that travel also need their ACT contacts on their phone. I've researched CompanionLink and know that I can get the ACT contacts directly onto the Blackberry that way, but, the problem arises where the ACT contacts will end up syncing back to the Exchange server -- which we don't want. We want to keep the automatic syncing with Outlook, but periodically we want to do a one-way ACT transfer onto our Blackberries, without having those extra (approximately 5,000) contacts go back into Outlook. Is there an easy way to categorize/separate Outlook and ACT? Any ideas or workarounds?
flashman181 wrote:
I am trying to sync my Outlook 2007 with my palm Treo Pro but keep getting the same error - server could not be reached Error code
80072ee2. This is probably a basic question but the server you enter into the Microsoft Exchange settings in active sync is the mail server you have in Outlook 2007? eg mail.internode.on.net. I don't need to do anything to outlook 2007 to "activate" Microsoft Exchange.
I'm looking at the Internode setup guides and it looks as though you have a POP server. In that case, if you want to sync directly to the server, you would want to set it up for POP/SMTP rather than for Microsoft Exchange Server. Does that help?
If you do not want to sync over the air and instead want to sync only by USB/Bluetooth to your PC, I think that works quite differently. I don't have any experience with that.
(Edit: Changed link style so it was more obvious.)
Message Edited by Jeffro on 05-27-2009 07:05 PM -
With Microsoft exchange server, leave messages UNREAD even if read on blackberry?
We are having issues that seems complicated but I'm sure there's a solution..
Sometime while at a restaurant or waiting for a light, I get a message on the blackberry but I can't fix the problem right a way or it can wait until I'm back at the office to be fixed, now when I get back to the office, I open Microsoft outlook 2003, (running off Microsoft exchange server) the message downloads into my inbox, but tagged as read.
Here is my question:
If I read a message on my blackberry, how do I leave the message unread on the exchange server? I have the MIKE (Telus) or Nextel if you prefer 8350i but I also have 9 other blackberry curve 8330 with the same problem.
Is there a way , an option leave unread on the server until downloaded to INBOX?
Any help would be appreciated.
Alainis this via BIS or BES?
If you disable reconcile on BES you can achive what you want.
Messages Options - Email reconciliation -
wireless reconcile = no
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V -
UCM certified with Microsoft Exchange Server ??
Hi,
Is UCM certified with Microsoft Exchange Server ? how can we integrate UCM with Microsoft Exchange Server as we have Desktop Integration Suite to integrate with MS Outlook..
Thanks,
NLAs for the link to the manual, for 10g it's here (I believe for 11g it will be similar if not the same): http://download.oracle.com/docs/cd/E10316_01/cs/cs_doc_10/documentation/admin/managing_system_10en.pdf
It also mentions that SMTP protocol is used. Therefore, you will need to know the SMTP address of your Exchange Server.
As for who uses it, I believe it is the majority or at least a significant part of the clients' installed base. Note that it is one of the most widespread email servers. -
Problem e-mailing reports after migrating to new Microsoft Exchange server
Hi,
I am now unable to e-mail (SMTP) reports to anyone in my company because we just migrated to a new Microsoft Exchange server. Anyone know how to get rid of this message?
Status: Failed
Printer: The instance is not printed.
External Destination: Mail the instance to "____________" with a subject of " %SI_NAME% %SI_STARTTIME% ".
Data Refresh Settings: Use the server defaults.
Start Time: 8/4/09 1:00:18 PM
End Time: 8/4/09 1:01:07 PM
Server Used: gmmc-crs.reportjobserver
Error Message: server error. SMTP_E_TCPSOCKET_OPEN(2): CrystalEnterprise.Smtp
We tried changing the gmmc-crs.reportjobserver with no luck.
Thanks,Hi,
You need to start with your exchange logs and possibly enable tracing on your BO webi/crystal/destination job servers (depending on the type of report and whether or not it is scheduled) to get an idea of how far down the line the SMTP connection is getting.
You could also confirm a few key things:
Have the SMTP destinations on your BO servers been updated with the new SMTP server info
Can you telnet to the mail server on port 25 from the BO server - if not, then check the firewall between the two servers and change the existing ruleset to allow connectivity to the new server
Possibly the old mail server didn't require authentication and the new server does, you could test this through telnet? -
Hi,
Previously I've two exchange server 2013 named : ABC and XYZ. After is decomm XYZ, i got this error :
DCOM was unable to communicate with the computer XYZ using any of the configured protocols; requested by PID 7b28 (C:\Program Files\Microsoft\Exchange Server\V15\Bin\MSExchangeHMWorker.exe).
EventID:10028
Source:DistributedCOM
May I know the reason why the server keep looking for the non-exist server and how to terminate this process?
Thanks in advance.Hello,
It seems that error message occurs on the same machine with the previous Exchange Server you have decommissioned. Have you reinstall the Windows System after uninstall the Exchange
Server?
You need to check the registry keys but this is not efficient solution. The most efficient way is to reinstall the Windows if it is convenient.
Thanks,
Simon Wu
TechNet Community Support -
How to set Iphone 4s to sync with Microsoft Exchange server 2003?
I am unable to set up my Microsoft Exchange Server with my Iphone 4s. The exchange server is 2003 with Service Pack 2 installed.
I have gone through the steps, but I get a box entitled “Exchange Account”saying “Unable to verify account information”.Hello,
Seems you are not using an Exchange server account, please refer to the following link and try to set the out of Office notices with POP3, IMAP, and Outlook.com accounts:
http://office.microsoft.com/en-us/outlook-help/send-out-of-office-notices-with-pop3-imap-and-outlook-com-accounts-HA010248748.aspx
Best Regards,
Steve Fan
TechNet Community Support -
How to integrate Microsoft Exchange Server with Oracle 11i EBS
Hello
Can Microsoft Exchange Server be integrated with Oracle??
If yes then HOW ??
Regards
FahadI have been with 2 clients that have used Exchange Server 2003 for processing Workflow Notifications for multiple 11.5.10.2 with ATG.H RUP 4 instances. I have found that Exchange will frequently take 4 hours to send notifications and 2-4 hours to process notifications that are replied back to it. Outbound messages generally fail with 451 Timeout waiting for client input errors, but finally send after about 4 hours. If you doing a live demo that needs to make use of Workflow Notifications, plan on waiting and waiting and waiting...
-
I have a BlackBerry and Microsoft Exchange Server. How will I sync with my new iPad?
I have a BlackBerry that is supported by a Microsoft Exchange Server so I can sync my BlackBerry and my laptop which is a PC. How do I sync my Outlook info with my new iPad2 so all of my devices are connected? Thank you.
The setup , as was mentioned, is basically the same as a Wimndows Mobile device. You need mail server name, your domain login and credentials You will also need to check you wi-fi connection and be sure you can get rhough whatever enterprise proxy servers you might have. If you have 3g I would use that and not mess around with a proxied network, if that is an issue for you.
One additional caveat....adding another mobile device significantly increases the complexity of your mail delivery system. There are articles on the Microsoft kbase that talk about Outlook calendaring best practices. Watch for calendar consistency issues. You might consider running Outlook in online rather than cached mode, or at the minimum deleting and rebuilding your cache file. -
Oracle HRMS Integration with Microsoft Exchange Server 2007
I would like to know if it is possible to integrate Oracle HRMS 11.5.10.x with Microsoft Exchange Server 2007 using Microsoft Identity Lifecycle Management (ILM) 2007?
Has anyone ever come across something like this and successfully achieved it? Does anyone know of a step-by-step guide (or forum discussion) to achieve this?
Response(s) will be highly appreciated.hi,
We actually implemented integration of SAP with microsoft exchange server. It is not necessary for server and IIS to be in the same machine.
regards,
Ganesh.N -
Groupware integration with microsoft exchange server
I have a query regarding Groupware integration with microsoft exchange server.whether we require IIS server and microsoft exchange server on the same machine for groupware integration.or they can be on different machines.
thanks,
Pramodhi,
We actually implemented integration of SAP with microsoft exchange server. It is not necessary for server and IIS to be in the same machine.
regards,
Ganesh.N
Maybe you are looking for
-
New mail sounds iphone5 not working
Doesn anyone know why the sounds for New Mail do not work? Only vibrate works. Thanks.
-
Nokia CS-15 and Ubuntu 9.10
I bought the product as I read it supports Linux. I tried plugging it in while in Ubuntu 9.10. Nothing happened. Then I downloaded nokia-zerocd-0.2-10_all.deb, and ran the installer. It halted with error code (likely it was "1" and "command not known
-
I am a new MAC user. So please, if you have a solution for me, speak slowly. (LOL) I have the new G5. Bought the Epson printer to go with it. It's the CX4200. I loaded the software for it. But can't get it to print. It seems the computer won't or can
-
Firefox keeps freezing unexpectedly, and I cannot find a cause or solution.
''locking as a duplicate - https://support.mozilla.com/en-US/questions/792922'' While using Firefox 4.0 RC, on Vista Business platform, the program keeps unexpectedly freezing. It usually does so while loading a page, but it is never the same page, a
-
Garage Band, I am using an MBOX with a digi design audio core as a mic interface to recod into Garage Band. Now when I Change the preferences to use the MBOX I can not move the recorder slider and there is no sound going into garage band? Any solu