Problem with internet after waking up (hp presario cq56)

Hi.
After waking up from "sleeping" state I can't connect to the internet, laptop just doesn't see the connection (wire). After rebooting everything turns back to normal.
Can anyone help me?
Thanks a lot!
PS
I'm using Gnome 3

That message probably comes from whatever network utility is in use, and it does not answer my question. Can you check if the driver for your network card is still loaded when you resume?

Similar Messages

Problems with Internet, after update to build 9926

updated to version 9926 via the Update Center. everything worked properly. once it updates via windows update kb2267602 kb3034229 and update for the graphics card. after installation, LAN connection and WIFI stopped working (unidentified network without
Internet access) diagnostics showed one or more protocols are not set / incorrect value ip. after the introduction of hand-ip network has become identified, but the Internet has not appeared and diagnostics began to show problems with DNS. Internet on other
devices are working properly. Sorry for my English.

Hi Jetbal,
What is your current situation?
Have you tried to manually install the LAN and WIFI drivers? Download the drivers from the manufacturer side, then take a try to install them with compatibility mode. Right -click on the install file, then select compatibility tab, under taht tab, choose
Windows 8.1 or Windows 7 compatibility mode and then install to check if issue could be solved.
Best regards
Michael Shao
TechNet Community Support

Problem with internet after "sleeping"

Hi.
I use arch on my laptop (hp presario cq56), when I shut it (when it is sleeping), after waking up I can't restore internet connection (wire). When I reboot, everything turns back to normal...
Anyone can help me?
Thanks a lot!
PS
I'm using Gnome 3
Last edited by Phil_ua (2011-10-20 19:17:18)

I find that wicd works a lot better than networkmanager, maybe you should try it

HUGES problems with display after waking up from hibernate mode

Hello everybody,
I hope that somebody can help me soon, because in the last 15 days I'm reaaaaallly annoyed with MAC's issues.
In the last 15 days it seemd I had to reboot it a lot of times, because it freezes, it crashes, etc...
Neverthless what happened today it passes all the limits: in the last period, because of these often crashes, I turn the mac off at night, on the other hand when I go to work I simply close the display and let it hibernates.
Today when I came back after work I opened it and it was amazing:
it has a different desktop!! With different icons in the dock, diferent icons in the top-right part, and it was freezed! I had to force it to shut down, restart it...and since then, I had huge problem with display.
It shakes everything while scrolling mails, web pages or icons in the dock. If I scroll between desktops, it takes year lights more than yesterday!!
Nothing happen if I restart as many time as I want.
In my simple opinion it seems a virus issue, but..as far as I know, there is no need to install an AV on a mac, right???
I tried to record some of these probls with the QT, but when you start recording all the desktop, it seems A LITTLE better, smoothing all these shaking effects. NEverthless they are still noticeable.
I'll try to attach a video as a dropbox link, 'cause I can't attach it on the message (it is denied)
PLEASE HELP MEEEEE!!!!
https://www.dropbox.com/s/r1mlpjo5x8g1tkj/scrolling%20problems.mov
https://www.dropbox.com/s/g1ey1xrheo9mvti/scrolling%20problems2.mov
https://www.dropbox.com/s/ljtm53go8ywt9fs/scrolling%20prob3.mov

I am going to add my problem to this as I believe it fits and may add to the conversation.
I have a MacBook Pro, am using Parallels, and have an issue waking it up from sleep.
Circumstances:
I close the lid and walk away from the device in my office. When I return, (over night or an hour later) I open the lid, and if nothing happens swipe the touchpad or press a key, the power light changes from pulsating to steady. then in less than 15 seconds it goes back to pusating. The display never energizes, only remain black.
I usually try opening and closing several times, and occaisionally that will work. Other times, I hold the power key until I hear the drive halt, then turn it on. The grey screen will display, then blue, then just before it gets to the log in, the screen goes black (not energized) and the light pulsates.
I have tried the PRAM reset and Safe Mode starts with no luck.
*Now the really wierd thing.* I decieded to contact Apple support on line and pay for help (yes that is weird in an of itself for me). As I began the process it came to the part for me to enter my serial number. With the lid open, I turned the MacBook on its side to try to read the number and the screen energized and the password unlock prompt was waiting for me to enter the password.
Observations
I had read where the light sensor could be blocked by dirt or the light in the room was too dim, but I clean the screen and there is plenty of light. Dales Post is the first that I have seen Parallels and the Sudden Motion Sensor. That makes some sense to me because of what happened when I turned it on its side. I have verified that it happens regardless of using Parallels. as teh last time I did it I had closed out of all my VMs and I believe exited Parallels.
I am going to try the deleting the power preferences file and will report back.

Problem with internet after getting stuck at loading screen

i'm having a LOT of trouble with my computer.
earlier today, after installing avast antivirus, my macbook completely freaked out, the internet wouldn't work so i restarted. my computer was stuck at the loading screen so i spent 40 minutes on the phone with apple support, and eventually after getting it to work in safe mode, we restarted and it loaded. this was after doing a "repair disk permissions" from the utility disk.
however, now my internet is having TONS of problems. firefox & chrome won't work. in safari, only facebook and my email will load. i have restarted my router but nothing will work. i'm scared to restart my laptop in case i run into problems again and get stuck on the loading screen. thankfully apple is one of the websites that will work...
advice? i'm completely computer illiterate and have no idea what information you need to help. i just know that, as a law student, i really need internet access but none of the websites i need will load. help.
also, as a note - i don't have access to internet other than my own right now & i don't have access to any other computer right now... just this one.

monicap28 wrote:
i'm having a LOT of trouble with my computer.
earlier today, after installing avast antivirus,
Uninstall that software. If it has an uninstaller, use it. If not, you will have to do so manually by checking the Preferences folder for all the straggler files. There are no viruses for osx according to Apple - http://www.apple.com/why-mac/faq/#viruses
After doing the above, repair permissions and restart your computer.

I downloaded OS X Lion on my iMac and I'm having problems with my computer waking up after hibernating. I can get to the login screen but my mouse will be frozen. The only fix's is a hard reboot. Any help would be great!

I downloaded OS X Lion on my iMac and I'm having problems with my computer waking up after hibernating. I can get to the login screen but my mouse will be frozen. The only fix's is a hard reboot. Any help would be great!

Try resetting the SMC and the PRAM.
1. SMC
Read this and follow the instructions for your kind of mac:
http://support.apple.com/kb/HT3964
2. PRAM
Follow the procedure below:
1. Power down the machine.
2. Locate the following keys on your keyboard in preparation for Step 4:
command–option–P–R
3. Press the ‘power on’ button.
4. Immediately – and before the grey screen appears – hold down ‘command-option-P-R’ all together.
5. Keep them held down until you’ve heard the start-up chime twice. After you release them you should hear it again, and hopefully your Mac will boot up as it should normally.

My macbook pro (lion 10.7.2) takes several minutes to connect to the internet after waking from sleep. Is there any way to make this instant?

Hi
My Macbook Pro 15 inch takes several minutes to be able to connect to the internet after waking from sleep. Does anyone else have this problem and is there a fix?
Alan

coxorangepippin wrote:
The message that comes up when I click on "TomTom Home Install" is "You cannot open Home Install because Power PC applications are no longer supported." Does this mean that the TomTom, which is absolutely vital to my life - well, not literally but you know what I mean - can no longer be used with my MacBook Pro?
What that means is that is can't be used with Lion 10.7. PowerPC was the chip Apple used up until 2006 when they switched to Intel. At that point, they created the Rosetta emulator to allow for PPC support for 5 years. They finally dropped the support with the release of Lion. It will only work with OS X 10.6 or earlier. The other option is to purchase a new GPS, which can be had for $100 for a decent one.

HT1933 I am facing problems with mails after update iPhone 4S/io7. I have configured yahoo mail in iPhone 4S. When I click on refresh, it shows new mail downloaded but when I go inside inbox the new mail don't show up. Can anyone help me with this iOS 7 i

I am facing problems with mails after update iPhone 4S/io7. I have configured yahoo mail in iPhone 4S. When I click on refresh, it shows new mail downloaded but when I go inside inbox the new mail don't show up. Can anyone help me with this iOS 7 issue ?

Hi were you able to resolve yours?
I was very worried losing all my medical stuff on my iPad Air 2, plus i have nothing to use for the next day! So i have to try all the possible things i read on the internet!! And this worked on my part (Thank God, and thank you Google)
Perform a hard reboot
Hold down the Home button and Power button on your iPhone or iPad and keep holding them until you see the Apple logo. Once you do, you can let go. When your device boots back up, go ahead and check to see if the apps have started re-downloading. If they still appear to be stuck, continue on.

Adding To The LIst Of Problems With Internet Explolrer 11 And Another Browser

I've b1 of the EA6500 router and like the othe posts I can't use IE 11. The "solution" is to use either Chrome or Firefox but not my Chrome has stopped working. All I get now is the LInksys Blue background. When I first see the site it looks like it's trying but then gives me a blue page. I've included screen prints of what I see when I go to Linksys Smart Wi-Fi page and below that is the version number. I have deleted my browser history, cache, saved form data, etc. but the result is still the same. And it doesn't matter if I use the router IP address or the Smartsys Wi-Fi link.
So right now the only broweser that will let me do router administration is Firefox but something tells me it too will have problems eventually.
the problem I'm having isn't with the router, it is with the company. People have tried to blame Micrtosoft in these posts for the problem but it's not their problem. The real kicker is that these Smart Wi-Fi routers are not old. nor are they cheap. LInksys announced this line at CES 2012, then again in April, and the last one announced for thie "initial" line-up of new routers was the EA6500 (the EA6500 was anounced in June 2012).
I've been mostly happy with LInksys reouters but if this is the way they are going to conduct business, then maybe I need to make certain adjustments with the networking products we purchase.
To put it bluntly...this situation is unacceptable.

Believe it or not I stumbled across the solution to the problem and need to partially retract one of my previous statements. In a sense part of the responsibility does go to Microsoft because during one of their infamous "updates", the default version of Internet Explorer was changed to use the 64-bit version. I rarely used the Internet Explorer (64 bit) link in my Start Menu...I always used the "default" which apparently was the 32-bit version because there are plenty of companies that have not updated their software for 64-bit.
The article I came across is Problem With Internet Explorer? Maybe You Need Fewer Bits. The fix is simple and all it really takes is to right-click the icon for Internet Explorer and choose "Properties". When that comes up change the value in the "Target" field from "C:\Program Files\Internet Explorer\iexplore.exe" to "C:\Program Files (x86)\Internet Explorer\iexplore.exe". Once you make the change save the change and then use that link to get to administer your browser. I tried it and it worked. I guess I missed the post from Linksys Support about that possibility.

Problem with internet. When i open System preferences, Network, message drops down: 'your network settings have been changed by another application'. I click OK, but it drops a message again and again, preventing me to do anything about the setting.

Problem with internet. When i open System preferences, Network, message drops down: 'your network settings have been changed by another application'. I click OK, but it dropps the message again and again, preventing me to do anything about the setting.

A Fix for "Your network preferences have been changed by another application" Error
In the Library/Preferences/SystemConfiguration/ folder delete the following:
com.apple.airport.preferences.plist
NetworkInterfaces.plist
preferences.plist
com.apple.nat.plist
You will have to re-configure all your network settings since deleting.
(10.4.10)
Use Software Update to update your OS to last version of Tiger. Install all the other updates that goes along w/it.

Problem with Java after Software Update to 10.5.7

Hi,
I am facing problem with Java after having run Software upgrades.
Here is the whole story. I recently moved to iMac 10.5.6 from PowerPc 10.4. On this new machine I was having problem running a 3rd party application, which requires JVM. As this application worked well on Tiger, I decided to upgrade JVM on my iMAC using Software Upgrade(was I insane!!). As I like my systems to be updated (as with linux on my personal machine) I clicked "install all". As a result I have the following upgrades run on my machine:
2009-05-20 13:12:01 +0200: Installed "Mac OS X Update Combined" (10.5.7)
2009-05-20 13:12:10 +0200: Installed "Remote Desktop Client Update" (3.2.2)
2009-05-20 13:12:26 +0200: Installed "Java For Mac OS X 10.5 Update 2" (1.0)
2009-05-20 13:58:36 +0200: Installed "Java for Mac OS X 10.5 Update 3" (1.0)
2009-05-20 13:58:44 +0200: Installed "AirPort Utility Software Update 2009-001" (5.4.1)
2009-05-20 13:59:07 +0200: Installed "QuickTime" (7.6)
2009-05-20 13:59:22 +0200: Installed "iPhoto Update" (7.1.5)
2009-05-20 13:59:28 +0200: Installed "iLife Support" (9.0.2)
2009-05-20 13:59:38 +0200: Installed "iDVD Update" (7.0.3)
2009-05-20 13:59:58 +0200: Installed "iTunes" (8.1.1)
But now, simply running $java on the prompt hangs, i.e. it takes no action.
$ which java
/usr/bin/java
$ ls -ltr /usr/bin/java
May 20 15:09 /usr/bin/java -> /System/Library/Frameworks/JavaVM.framework/Versions/Current/Commands/java
$java (no response)
Here is the output of $ top
PID COMMAND %CPU TIME #TH #PRTS #MREGS RPRVT RSHRD RSIZE VSIZE
703 java 98.8% 0:38.54 3 110 72 480K 184K 1964K 40M
Any clues?
Details of JavaVM on my machine
$ pwd
/System/Library/Frameworks/JavaVM.framework/Versions
$ ls -ltr
total 56
drwxr-xr-x 3 root wheel 102 Dec 2 2007 1.3.1
lrwxr-xr-x 1 root wheel 3 Aug 31 2008 1.4.1 -> 1.4
drwxr-xr-x 8 root wheel 272 Aug 31 2008 1.4.2
drwxr-xr-x 8 root wheel 272 Aug 31 2008 1.5.0
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.3 -> 1.3.1
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.4 -> 1.4.2
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.5 -> 1.5.0
drwxr-xr-x 8 root wheel 272 May 20 13:12 1.6.0
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.6 -> 1.6.0
drwxr-xr-x 8 root wheel 272 May 20 13:12 A
lrwxr-xr-x 1 root wheel 1 May 20 14:57 Current -> A
lrwxr-xr-x 1 root wheel 3 May 20 14:59 CurrentJDK -> 1.5
Any suggestions? Is there a cleaner approach to uninstall Java on Mac then a simpl "move to thrash"!
cheers

Hi,
I am facing problem with Java after having run Software upgrades.
Here is the whole story. I recently moved to iMac 10.5.6 from PowerPc 10.4. On this new machine I was having problem running a 3rd party application, which requires JVM. As this application worked well on Tiger, I decided to upgrade JVM on my iMAC using Software Upgrade(was I insane!!). As I like my systems to be updated (as with linux on my personal machine) I clicked "install all". As a result I have the following upgrades run on my machine:
2009-05-20 13:12:01 +0200: Installed "Mac OS X Update Combined" (10.5.7)
2009-05-20 13:12:10 +0200: Installed "Remote Desktop Client Update" (3.2.2)
2009-05-20 13:12:26 +0200: Installed "Java For Mac OS X 10.5 Update 2" (1.0)
2009-05-20 13:58:36 +0200: Installed "Java for Mac OS X 10.5 Update 3" (1.0)
2009-05-20 13:58:44 +0200: Installed "AirPort Utility Software Update 2009-001" (5.4.1)
2009-05-20 13:59:07 +0200: Installed "QuickTime" (7.6)
2009-05-20 13:59:22 +0200: Installed "iPhoto Update" (7.1.5)
2009-05-20 13:59:28 +0200: Installed "iLife Support" (9.0.2)
2009-05-20 13:59:38 +0200: Installed "iDVD Update" (7.0.3)
2009-05-20 13:59:58 +0200: Installed "iTunes" (8.1.1)
But now, simply running $java on the prompt hangs, i.e. it takes no action.
$ which java
/usr/bin/java
$ ls -ltr /usr/bin/java
May 20 15:09 /usr/bin/java -> /System/Library/Frameworks/JavaVM.framework/Versions/Current/Commands/java
$java (no response)
Here is the output of $ top
PID COMMAND %CPU TIME #TH #PRTS #MREGS RPRVT RSHRD RSIZE VSIZE
703 java 98.8% 0:38.54 3 110 72 480K 184K 1964K 40M
Any clues?
Details of JavaVM on my machine
$ pwd
/System/Library/Frameworks/JavaVM.framework/Versions
$ ls -ltr
total 56
drwxr-xr-x 3 root wheel 102 Dec 2 2007 1.3.1
lrwxr-xr-x 1 root wheel 3 Aug 31 2008 1.4.1 -> 1.4
drwxr-xr-x 8 root wheel 272 Aug 31 2008 1.4.2
drwxr-xr-x 8 root wheel 272 Aug 31 2008 1.5.0
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.3 -> 1.3.1
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.4 -> 1.4.2
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.5 -> 1.5.0
drwxr-xr-x 8 root wheel 272 May 20 13:12 1.6.0
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.6 -> 1.6.0
drwxr-xr-x 8 root wheel 272 May 20 13:12 A
lrwxr-xr-x 1 root wheel 1 May 20 14:57 Current -> A
lrwxr-xr-x 1 root wheel 3 May 20 14:59 CurrentJDK -> 1.5
Any suggestions? Is there a cleaner approach to uninstall Java on Mac then a simpl "move to thrash"!
cheers

Problem with Java after System Upgrade to 10.5.7

Hi,
I am facing problem with Java after having run Software upgrades.
Here is the whole story. I recently moved to iMac 10.5.6 from PowerPc 10.4. On this new machine I was having problem running a 3rd party application, which requires JVM. As this application worked well on Tiger, I decided to upgrade JVM on my iMAC using Software Upgrade(was I insane!!). As I like my systems to be updated (as with linux on my personal machine) I clicked "install all". As a result I have the following upgrades run on my machine:
2009-05-20 13:12:01 +0200: Installed "Mac OS X Update Combined" (10.5.7)
2009-05-20 13:12:10 +0200: Installed "Remote Desktop Client Update" (3.2.2)
2009-05-20 13:12:26 +0200: Installed "Java For Mac OS X 10.5 Update 2" (1.0)
2009-05-20 13:58:36 +0200: Installed "Java for Mac OS X 10.5 Update 3" (1.0)
2009-05-20 13:58:44 +0200: Installed "AirPort Utility Software Update 2009-001" (5.4.1)
2009-05-20 13:59:07 +0200: Installed "QuickTime" (7.6)
2009-05-20 13:59:22 +0200: Installed "iPhoto Update" (7.1.5)
2009-05-20 13:59:28 +0200: Installed "iLife Support" (9.0.2)
2009-05-20 13:59:38 +0200: Installed "iDVD Update" (7.0.3)
2009-05-20 13:59:58 +0200: Installed "iTunes" (8.1.1)
But now, simply running $ java on the prompt hangs, i.e. it takes no action.
$ which java
/usr/bin/java
$ ls -ltr /usr/bin/java
May 20 15:09 /usr/bin/java -> /System/Library/Frameworks/JavaVM.framework/Versions/Current/Commands/java
$java (no response)
Here is the output of $ top
PID COMMAND %CPU TIME #TH #PRTS #MREGS RPRVT RSHRD RSIZE VSIZE
703 java 98.8% 0:38.54 3 110 72 480K 184K 1964K 40M
Any clues?
cheers

Hi man,
In the wake of this java problem I resorted to keep working on my old machine, and today in my spare time I tried to fix this new machine.
So I execute $java on prompt, and then try to check the files it has opened, using lsof -p pid
I see it referring to
/System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Home/bin/java
isn't this usually the JAVA_HOME
However, executing $/System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Home/bin/java
hangs!!
but
$/System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/bin/java
works!!
$ pwd
/System/Library/Frameworks/JavaVM.framework/Versions/1.6/Home/bin
$ ./java -version
java version "1.6.0_07"
Java(TM) SE Runtime Environment (build 1.6.0_07-b06-153)
Java HotSpot(TM) 64-Bit Server VM (build 1.6.0_07-b06-57, mixed mode)
So, I changed the links as follows
borgraf:Versions raveesh$ l
total 72
drwxr-xr-x 3 root wheel 102 Mar 6 2008 1.3.1
lrwxr-xr-x 1 root wheel 3 May 21 19:42 1.4.1 -> 1.4
drwxr-xr-x 8 root wheel 272 May 21 19:42 1.6.0
lrwxr-xr-x 1 root wheel 3 May 21 19:44 OldCurrentJDK -> 1.5
lrwxr-xr-x 1 root wheel 5 May 21 19:44 1.4 -> 1.4.2
lrwxr-xr-x 1 root wheel 5 May 21 19:44 1.3 -> 1.3.1
lrwxr-xr-x 1 root wheel 5 May 21 19:44 1.5 -> 1.5.0
drwxr-xr-x 8 root wheel 272 May 21 19:44 1.4.2
drwxr-xr-x 8 root wheel 272 May 21 19:44 1.5.0
lrwxr-xr-x 1 root wheel 5 May 21 19:44 1.6 -> 1.6.0
lrwxr-xr-x 1 root wheel 1 May 21 19:44 OldCurrent -> A
drwxr-xr-x 8 root wheel 272 May 21 19:44 A
lrwxr-xr-x 1 root wheel 3 Jun 4 17:14 CurrentJDK -> 1.6
lrwxr-xr-x 1 root wheel 3 Jun 4 17:21 Current -> 1.6
Linking my Current and CurrentJDK to 1.6 and it works!
However, shall that be the reason!
what is in your /Versions/Current/
I got the following
$ ls /System/Library/Frameworks/JavaVM.framework/Versions/Current
CodeResources Frameworks JavaVM
Commands Headers Resources
There is no /Home in here, which is usually the case for /1.5 or /1.6
Anyways, things seems to work for the moment. Lets see if I get problem with using Java.
thanks

I am having problems with mail after upgrading to mountain lion. Is there a way to go back to lion?

I am having problems with mail after upgrading to mountain lion. Is there a way to go back to lion?

It would always be easier to fix the Mail problems.

Problems with Mail after upgrading to 10.9.1

I am running into problems with Mail after installing 10.9.1. I had NO problems with Mail prior to this update.
Problems I have encountered so far are:
- I don't receive some e-mails on my Gmail account.
- I have sent e-mails that supposedly got "sent" but do not show up in my Sent box both on mail and on web Gmail. My Outbox is empty also.
Has anyone encountered the same problems and found a solution?
Thanks in advance!

Yes Paul I have, but no solution. I cannot send email. My ISP uses a smtp mail server for sending and It will not log in. Have had ISP on phone and checked all settings. Can only put it down to Mavericks.
It worked OK for a week after upgrading then stopped. So now having to use web mail to send email.
Strange thing is I receive mail OK, just cant send.

HT1589 problems with itunes after updating..can't locate some of my songs..some have an exclamation point beside them how do i get these songs back in my itunes

I'm having problems with itunes after updating. I've lost all my playlists,,finally played around with it and got the songs back but some have an exclamation point beside them and can't be located. they are songs i've purchased. I'm not very computer literate so this is a major problem. I have spent hours with this. I just want all my songs to play even though I'm not happy that I have to recreate my playlists. It would be so much easier if I knew and understood how to correct this. Has anyone else had this problem and if so..is there an easy way to correct it?

Not sure how this is an ipod touch question.
Perhaps you should post in the itunes forum.

Problem with internet after waking up (hp presario cq56)

Similar Messages

Maybe you are looking for