Problem with Internet connection sharing between eMac and Powerbook G3

Hi,
I seem to be having a slight problem with internet connection sharing.
My eMac is the main machine with the internet connection, and its running 10.4.6, the Powerbook G3 is running 10.2.8.
I can connect them all up and get online with both, but I the problem I am having is when I turn the Firewall on on the eMac, the powerbook can't connect.
Is there anyway I can keep the Firewall enabled and still use internet connection sharing?

How do I know which ports the Powerbook is using?
Also I had web sharing enabled on the eMac and it made no difference at all.
Plus I don't know if this means anything to you, trying to decipher it myself, all I can make out myself on there is port 80.
May 31 21:26:30 Craigs-Macintosh ipfw: 12190 Deny TCP 10.0.2.2:49743 67.15.24.40:80 in via en1
May 31 21:26:34 Craigs-Macintosh ipfw: Stealth Mode connection attempt to UDP 10.0.2.1:192 from 10.0.2.2:49531
May 31 21:26:34 Craigs-Macintosh ipfw: Stealth Mode connection attempt to UDP 10.0.2.1:192 from 10.0.2.2:49532
May 31 21:26:39 Craigs-Macintosh ipfw: Stealth Mode connection attempt to UDP 10.0.2.1:192 from 10.0.2.2:49533
May 31 21:26:39 Craigs-Macintosh ipfw: Stealth Mode connection attempt to UDP 10.0.2.1:192 from 10.0.2.2:49534
May 31 21:26:42 Craigs-Macintosh ipfw: 12190 Deny TCP 10.0.2.2:49743 67.15.24.40:80 in via en1
May 31 21:26:44 Craigs-Macintosh ipfw: Stealth Mode connection attempt to UDP 10.0.2.1:192 from 10.0.2.2:49535
May 31 21:26:44 Craigs-Macintosh ipfw: Stealth Mode connection attempt to UDP 10.0.2.1:192 from 10.0.2.2:49536
May 31 21:29:12 Craigs-Macintosh ipfw: 12190 Deny TCP 10.0.2.2:49746 17.254.0.91:80 in via en1
May 31 21:29:15 Craigs-Macintosh ipfw: 12190 Deny TCP 10.0.2.2:49746 17.254.0.91:80 in via en1

Similar Messages

Internet connection sharing between Mac Mini and Imac G3- how?

Ok, I'm trying to connect my G3 Imac (running 10.4.8) to my Mac Mini (also running 10.4.8) but it just wont work.
I've turned Internet Connection sharing on on my Mac Mini, and set it to share the airport connection to computers connected using Built in ethernet.
Network (on the M Mini) shows
Built-In Ethernet is currently active. Built-In Ethernet has a self assigned IP address and may not be able to connect to the Internet.
Network (on the G3) shows
Built-In Ethernet is currently active and has the IP address 192.168.2.7. You are connected to the Internet via Built-In Ethernet.
When i try to go to a webpage on the G3 it fails stating, 'You are not connected to the Internet'.
I'm using a standard straight through ethernet cable, as I was told a while ago from apple support that it doesn't matter which u use, straight through or crossover.
Any help would be really appreciated
Macbook 2.0Ghz 2GB 80GB/Mac Mini 1.42Ghz 1GB 80GB/Imac G3 450Mhz 640MB 80GB Mac OS X (10.4.8)

OK after some playing about I can now manage to connect to the mac mini and vice versa to share files.
The iMac G3 now says it has an IP address of 192.168.2.18, and that it's connected to the internet via built-in ethernet. I've set configure IPV4 to Using DHCP.
Except it's not connected to the net.
If i select Using DHCP on the Mini it doesn't obtain an IP address, not even a self set one. So i've set a manual IP address on that, and everything shows up green. Airpot connected to the internet and Ethernet has an IP address of 192.168.2.30.
After reading some forums I set up firewall logging. The result is what happens on the Mac Mini when I use network diagnostics on the G3:
Feb 11 16:43:52 richard-xxxxx-mac-mini natd[394]: failed to write packet back (Host is down)
So I opened port 394 (not really knowing what i'm trying) but it had no effect.

Problem with internet connect?

Hi,
I have installed a Netgear wireless router, which is connected to my eMac by an ethernet cable. I can access the internet through Firefox without a problem, but when I try to check software update or get to the itunes store it says it cannot connect to the internet. I think that this must be something to do with internet connect, as when I log in a error message comes up on the screen and also the only options for connection when internet connect is opened is BT Voyager 105 (the previous ADSL Modem) and Internal Modem.
If anyone can offer any advice I would be very grateful!
Thanks very much,
Claire

Hi David,
I opened up Safari, went to preferences, and then clicked the advanced tab. There should be a button saying 'Proxies: change settings', I clicked on this and it opened up the network settings (through system preferences),and found that it was trying to connect through an old proxy set up whilst it was on a university network. I simply highlighted the proxy (xxxx.ac.uk), pressed the delete key, and then clicked on the apply now button. All seemed to work then! I suspect I was just lucky that this was the only cause of the problem, as it seems that some people have not been able to resolve their problem this way.
Hope this helps in some way,
Claire

Script Alert: ...problem with Internet connection

Since upgrading to 1.0.3, I get this alert every time I launch Bridge. There is a problem with your Internt connection. Please check that you are connected to the Internet and please try again."
I am definitely connected to the Internet and there's nothing wrong with the connection when this happens.
Any way to get it to stop?
WinXP Illy CS2 installed, none of the other suite.
Thanks in advance,
T Toomey

Toni,
That is Adobe StockPhoto attempting to go out and touch it's server on startup.
The only fix I know of is to rename the ols.jsx file to something like old.jsxNoLoad or move it to another folder.
That script list located in the startup scripts folder:
PC - c:\Program Files\Common Files\Adobe\StartupScripts
Mac - /Library/Application Support/Adobe/StartupScripts
I am not certain of what effect this has on StockPhoto. (I don't work on StockPhoto, I am only relaying information to you from the Bridge forums). If it breaks StockPhoto and you need it, you can rename the file back to ols.jsx when you need to use it and are connected to the internet.
Bob
Adobe Workflow Scripting

Problem with internet connection after update ...

Hi
I have install the new update firmware for my ipad 2 (5.0.1) and immediatly after not internet connection possible. My setting have been erase (same with my ipod itouch update). I try to connect at my routeur with right password but doesnt working .... I have already install update last time and never have this problem.
Have you an idea why it's not working ?
thanks of advance.
Thekeep

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Also try this - Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
 Cheers, Tom

Internet Connection lost between AEBS and Mac through LAN

For the last year I have had no problems with my AEBS. I have it configured like this: My Modem is connected via ethernet cable to my AEBS and then out to my G3. I have no airport card in my G3. All of a sudden I get no outgoing signal from my AEBS to my laptops, nor can my G3 get an internet connection unless I plug the modem directly into the G3 and bypass the AEBS. I am frustrated beyond words and my teenagers are impossible to bear without their wireless connections. Ideas? Thanks

Welcome to Apple Discussions!
Do you have a cable or DSL connection? If you have a DSL connection, you may need to reset your PPOE settings.
This may help as well: http://docs.info.apple.com/article.html?artnum=106858

Problem with Internet Connection Mode

I followed the manual instruction, but nothing shows under my PC's list of available wifi connections.
I have a Dell Inspiron 1501 running Windows Vista.
HTC Sync is latest version (3.0.5517) and shows connection to phone.
Phone shows Internet Connection Mode as selected.
Data connection is on (Mobile network is checked)
What's the problem? Thanks.
Erin

Hello Erin,
Just to clarify, the cost for the mobile hotspot/ mobile broadband connect has not been determined after 6/15. You will receive a message on the device asking if you would like to continue the service at a cost.
As stated by a previous member, there is an app on the device that needs to be setup to use the mobile hotspot feature. It does require some setup, like a security password, but it really easy to complete. I would verify that the router name (SSID) is filled out & that the security is set to WPA2 (AES). Also, I would recommend changing the default password for added security.
Hope this helps...

HT1349 problems with internet connections

ISSUE : I am having trouble loading common internet sites like youtube, ebay, google, etc. This issue doesn't occur everytime but often enought for me to seek help. This is my first Macbook and I dont know if it is the computer or if it is a issue with my internet provider. Also, strange enough my girl friend's Acer computer (Window 7) has no issue with failed connections. We can be sitting side by side and my computer not load a site while hers loads the site without issue. I would appreciate any help on the issue.

Have you checked to see if a firmware update is available for your router?
And what specifically are the symptoms? Do you get a connection, but no apps work? Is it able to find the network at all?

Insufficient privledges when sharing between iMac and Powerbook

I just upgraded both my powerbook and iMac to Leopard and want to turn on file sharing between the two. The way it used to work with Tiger, I would just click on the drive on my network and it would give me read and write privledges. Now it is saying that I have insufficient privledges. I can get the powerbook to mount the iMac and vice versa but can't seem to do much else.
I am trying to move my iPhoto library from my Powerbook to my iMac.
Thanks

If you are trying to write directly into the iPhoto Library, note that it is not a regular folder but a package. The permissions on the iPhoto Library package only allow writing by the owner, so another approach is needed, such as those mentioned in http://support.apple.com/kb/HT1198

Problem with Internet connection via Wireless

Dear Friends,
I have a strange problem, we have network consist of 7 AP (1 WDS and other are WDS clients)
When we connection for example 8 devices to the wifi, 5 of them can connect to the internet, 3 of them can ping ip address of website but cant enter to the website, nothing happens, it can be in different proportions, 3 device can access 5 not, DHCP with all configs is on WDS access point, all of them connected to unmanaged HP switch which connected to the router
Please help to understand this
Thank you

Provide the details of the devices and configuration.

Problems with file/print sharing between macs

I just recently created a network between my mac pro and my imac. I discovered that the only way that I could share files/printers between the two is if I shut off the firewall on both machines. If I let the firewall 'allow only essential services ie, file and printer sharing, the machines would see each other and the printers, but would not allow either to connect. Any suggestions?

Thanks a lot Frank.
The firewall has always been disabled, since I baught my iBook.
There's two issues, the irc app and the videocam app.
Guess the videoapp is an easier issue. The port is 2000-2002
The irc application is I think a little more complicated, it has two settings in the prefs file (the app is IRCLE):
1. In the DCC prefs I flagged the "ADSL, Airport, IPNetRouter and have flagged the auto configure for the Public IP Number (151.51.138.131).
2. There is also a Firewall prefs. I haven't done anything with this. There's an areal called "Ident Settings (OS X only)". There one can flag the "Run Ident on a different port than the usual 113" If one flags that, then you can choose the port (it says it must to be 1024 or greater). "Note: you may need to change your firewall rules to make ident work this way, redirect incoming ident data for TCP port 133 to the port set above"
Does this make any sense?
Thanks a lot again, really,
Emmanuel

Startup problems with XA connection pools on Oracle and WLS 6.1

I am having starup problems trying to set up a WLS 6.1 connection pool using
XA. When I try to start the server, I get the following exception:
<Nov 19, 2001 3:06:28 PM EST> <Error> <JDBC> <Cannot startup connection pool
"dbdev1XAPool" weblogic.common.ResourceException: java.sql.SQLException:
open failed for XAResource 'dbdev1' with error XAER_RMERR : A resource
manager error has occured in the transaction branch. Check Oracle XA trace
file(s) (if any) for database errors. The Oracle XA trace file(s) are
located at the directory where yo
u start the Weblogic Server, and have names like
xa_<pool_name><MMDDYYYY>.trc.
at weblogic.jdbc.oci.xa.XAConnection.<init>(XAConnection.java:58)
at
weblogic.jdbc.oci.xa.XADataSource.getXAConnection(XADataSource.java:600)
at
weblogic.jdbc.common.internal.XAConnectionEnvFactory.makeConnection(XAConnec
tionEnvFactory.java:194)
at
weblogic.jdbc.common.internal.XAConnectionEnvFactory.createResource(XAConnec
tionEnvFactory.java:54)
at
weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllocator.j
ava:698)
at
weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.java:282
at
weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.java:620
at
weblogic.jdbc.common.JDBCService.addDeployment(JDBCService.java:107)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentT
arget.java:329)
The contents of the Oracle trace file:
ORACLE XA: Version 8.1.7.0.0. RM name = 'Oracle_XA'.
150627.1312:344.344.330727191:
xaoopen:
xa_info=Oracle_XA+Acc=P/cmauser/admin+SesTm=100+DB=dbdev1+Threads=true+LogDi
r=.+DbgFl=0x15,rmid=330727191,flags=0x0
150627.1312:344.344.330727191:
ORA-12560: TNS:protocol adapter error
150627.1312:344.344.330727191:
xaolgn_help: XAER_RMERR; OCIServerAttach failed. ORA-12560.
150627.1312:344.344.330727191:
xaoopen: return -3
I am running WLS 6.1 and Oracle 8.1.7 on windows (separate machines). The
connection pool settings are:
<JDBCConnectionPool CapacityIncrement="0"
DriverName="weblogic.jdbc.oci.xa.XADataSource" InitialCapacity="40"
MaxCapacity="40" Name="dbdev1XAPool"
Properties="user=cmauser;password=admin;dataSourceName=dbdev1"
RefreshMinutes="15" ShrinkingEnabled="false" SupportsLocalTransaction="true"
Targets="cmatest" TestTableName="hppcontentsource" />
I have not had any problems connecting to the same database through regular
JDBC connection pools or through the utils.dbping utility.
What am I doing wrong?

This is a dup message. Add "DebugConfigInfo OFF" in httpd.conf.
Jong
[email protected] (Olaf Foellinger) wrote:
>
Hi,
we're trying to setup apache on linux so that it's forwarding all jsp
requests to Bea WLS 6.0 on Solaris. We've installed the mod_wl.so
modules according to the documentation. When apache starts it shows the
following warning:
[Tue Jan 9 13:22:55 2001] [warn] Loaded DSO
/usr/lib/apache/1.3/mod_wl.so uses plain Apache 1.3 +API, this module
might crash under EAPI! (please recompile it with -DEAPI)
and in fact, when we try to load a jsp page we get
[Tue Jan 9 13:29:14 2001] [notice] child pid 5780 exit signal
Segmentation fault (11)
Does anyone have a working solution ? Can bea provide us with a plugin
compiled with EAPI ?
Greetings Olaf

CSS Problem with Internet Explorer 8.0 Filters and linked reports

Hi ,
The Internet explorer 8.0 re presents the filter prompt for linked reports and a warning of "Prevention of XSS" is flashed on the browser. Is there a patch for this since changes in Interner explorer security setting are not possible to be changed in all clients.
Thanks
Regards
Shivakanth

Jovaini,
IE 8 handles threads different than previous versions. Thus, if you sign into an APEX workspace and then try to start a new instance of IE 8, that process is no longer seen as a separate process like IE 6 & 7, but rather as another "tab", if you will. Thus, as soon as you log into workspace 2, your login credentials for workspace 1 are invalidated. This is true even if workspace 2 is the APEX Admin Console, as it uses the same underlying authentication mechanism.
To solve this, you have a couple of options:
1) Use two different browsers (i.e. IE 8 and Google Chrome).
2) Use the hostname for one session and the IP address for another session. This will limit you to two concurrent logins.
3) Either edit your local hosts file or if you can, have your network administrator create a number of aliases to the same APEX server. You can then use each alias for a different session with the same browser. APEX manages its session cookies based on the hostname, so if you have 10 aliases, you will be able to be logged into 10 separate workspaces within the same browser using this approach.
Thanks,
- Scott -
http://spendolini.blogspot.com
http://www.sumneva.com

Problem with the voice volume between incoming and outgoing calls

Hi all.
I have a situation with volume calls.
1.- When the calls are originated in the PSTN to the IP Phones, the volume is ok in both sites.
2.- When the calls is originated in the IP Phones to the PSTN, the person in the PSTN listens very low.
I try to adjust the volume in the voice-port configuration, increasing the input and output db value, but not if I am doing it well or if I need adjust the configuration in other part.
The router 2801 have a CCME ver 4, this router is connected to PBX with a E1 and the PBX have the PSTN Digital trunks.
this is the voice router configuration:
voice-card 0
dsp services dspfarm
voice service voip
allow-connections h323 to h323
supplementary-service h450.12
controller E1 0/0/0
framing NO-CRC4
line-termination 75-ohm
ds0-group 0 timeslots 1-12 type e&m-immediate-start dtmf dnis
description to the PBX
voice-port 0/0/0:0
auto-cut-through
input gain 4
output attenuation 4
playout-delay nominal 200
playout-delay minimum low
bearer-cap Speech

Try using a negative value in the output attenuation setting. My understanding is that negative values in the the output attenuation increases the volume out to the PSTN. Make small adjustments as you increase the chance for echo. Positive values decrease the volume.
Larry

Problems with effects being lost between motion and final cut?

Hi I have an older version of motion, I am editing a video for my course and I have made some motion graphics with some blurs and fades etc (just this kids of effect, nothing else), when they are imported into final cut they disapear all i have is static text or graphics that crawl across the screen...
Is this a bug?
If I let software update do its job would these problems go away.
Just so you know Final cut 5.1.4 and Motion 2.0.1
thanks in advance if anyone can help.
Matt

Great fix....I started a compression to NTSC and it should be done in 3 hours, I will then boot up FCP, chose a 1 minute clip...follow your directions to the T. and compare the results....I did have this solved when I used NTSC 4:3 before; however, when I chose the menu with the mpeg2 codec, I thought that it would be faster....

Problem with Internet connection sharing between eMac and Powerbook G3

Similar Messages

Maybe you are looking for