Problem with interspersed response -- opening vertical space fail

mail.app version 5.3 (1283) on MacOS 10.7.5
I can top- or bottom- post and do so when appropriate, generally in very simple email conversations.
BUT, for more complex threads, I commonly want to open some space between each paragraph of each incoming message to insert my response. (Incoming paragraphs are typicallly separated by a blank line or two.) Mail.app provides horizontal bar quoting indicators at the left to mark the progress of the thread over many exchanges, though this mechanism often seems not to be very well supported by the email clients of my correspondents. (I often end up increasing the quoting manually to restore a semblance of the correct quoting of a thread. Oh, well...)
I've been using mail.app only since I installed 10.7, shortly after it was released. With varying success, especially when using formatted as opposed to plain text. Exchanges with some people work more or less flawlessly.   The most common difficulty: I have trouble opening up vertical space below an incoming, quoted paragraph in which to type my response to that para. Up until today, I've always been able to find a way, by exeriment of where I put the cursor, using shift-enter instead of enter, etc, etc.
But for a message I just received, I cannot. Every attempt I make to open some vertical space results in ... trouble. If I put the cursor on a blank line between incoming paragraphs and command "decrease quote level" I get 8 inches [!] or so of quoted vertical space, followed by 8 more inches or so of unquoted vertical space, followed by the following paragraph and the rest of the thread, apparently intact. That's not right!
Fortunately, I can undo and resume ... to do what? I get a similar result if I try placing the cursor that line and hit "enter". Or "Enter". Or "shift-enter".
Yeah, it looks like I've opened 10 inches in which to insert my response to the first paragraph, but first I need to get rid of most of the inserted quoted vertical space -- an impossible task, as far as I can see. If I put the cursor on the first line of unquoted space and backspace, the 10 quoted inches stay the same and characters delete from the end of the previous quoted parag.
What's going on?   Are there any methods of recovering some semblance of normal operation so I can answer this incoming message? (OK, I've given up and responded by top-posting.)   I note that I can view the source of the incoming message, but I see no way to view the source of the response, to see what exactly is going on. What is actually being inserted in the formatted text source that creates the mess I observe?
In this case, viewing the incoming source seems to reveal only one apparent client name: Zimbra.   Is that a client? Could Zimbra and mail.app have ... issues with each other?
Are there any mail.app add-ins that might help?   Work-arounds?   (Yeah, probably converting to plain text would solve the problem, but that has other issues.)   Any applicable help or articles?
Am I missing anything incredibly obvious?
TIA

Similar Messages

Hi I have problem with itunes, i opened by mistake song in itunes and after my itunes were like deleted ? Can you help me please ?

Hi I have problem with itunes, i opened by mistake song in itunes and after my itunes were like deleted ? Can you help me please ?

For general library squiffiness following an upgrade the easiest thing is to restore your last backup, but I guess if it were that simple you wouldn't be here.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps youshouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

What is the problem with the newest version of iTunes (Failed to install - error 7

What is the problem with the newest version of iTunes (Failed to install - error 7 & missing MSVCR80.dll) - the DLL is not missing. tgried to install today and it failed - what a waste.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall go to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Anchored Objects with text wrap, need vertical space

Hi. I'm a fairly new InDesign user and have just this past week learned about anchored objects, threading text frames, numbered lists, and some other fun options. So far InDesign has done most everything I need fairly elegantly. However, I have not been able solve one issue.
In my book I have numerous pages that have this issue; I'll just describe one case. On this page there are 4 graphics running down the right side of the page. These are not anchored graphics. They do have text wrap defined on the left side and bottom. There is text that wraps lovely on the left.
Each of these four graphics has a specific paragraph it needs to top align with. However, the text it aligns with may not take up as much vertical space as the graphic does. When I anchor each graphic with the paragraph it needs to align with, the four graphics overlap each other.
At the moment, to make it look right, I have placed each graphic individually and added a blank paragraph above each paragraph of text that should align with a graphic and use the Space Above of each blank paragraph to have it align with the graphic.
I'm not even sure what to search to try and solve this. I looked briefly into compound paths, but that didn't look like it would help.
I hope this is clear and thank you for any assistance at all.
Andrea

No problem. Click your cursor somewhere in the paragraph that ought to be aligned with the next image down, then run this Javascript.
It's not entirely accurate, as it uses the font size to do a minimal adjustment where it actually should use the font's cap height -- but you cannot get to that through scripting. This final adjustment is necessary because ID does know the baseline, and your first line ought to dip just below this to have the top of the first line aligned to the top of the image.
//DESCRIPTION:Align paragraph with image.
// Jongware, 15-Jul-2010
if (app.selection.length == 1 && app.selection[0].hasOwnProperty ("baseline") && app.selection[0].paragraphs[0].index > 0)
     // find nearest image on the right
     ypos = app.selection[0].paragraphs[0].lines[0].baseline;
     pg = app.selection[0].parentTextFrames[0];
     while (1)
          if (pg instanceof Character)
               pg = pg.parentTextFrames[0];
          if (pg instanceof Spread || pg instanceof Page)
               break;
          if (pg instanceof Document || pg instanceof Application)
               exit(0);
          pg = pg.parent;
     img = pg.allGraphics;
     dist = 999999;
     nearest = null;
     for (i=0; i<img.length; i++)
          if (img[i].geometricBounds[0] > ypos && Math.abs(img[i].geometricBounds[0] - ypos) < dist)
               dist = Math.abs(img[i].geometricBounds[0] - ypos);
               nearest = img[i];
     if (nearest == null)
          alert ("no image found nearby!");
     else
          prevm = app.activeDocument.viewPreferences.verticalMeasurementUnits;
          app.activeDocument.viewPreferences.verticalMeasurementUnits = MeasurementUnits.POINTS;
          top = nearest.geometricBounds[0];
          ypos = app.selection[0].paragraphs[0].lines[0].baseline;
          if (ypos < top)
               app.selection[0].paragraphs[0].spaceBefore = top-app.selection[0].pointSize-app.selection[0].parentStory.paragraphs.previousItem(app.selection[0].paragraphs[0]).lines[-1].baseline;
          app.activeDocument.viewPreferences.verticalMeasurementUnits = prevm;
This image shows three paragraphs aligned with their respective images (it won't work on the first paragraph, but that ought not to be necessary anyhoo).

Problem with long response time when looking at queues!

Hello,
I have a problem with extream long response times, when looking at the queues in Message mapping test tool . Does anyone know how to improve performance.
The source message I use is about 200 segments (idoc)
The mapping is done with the graphical tool, with 10-15 field contain standard sap functions for mapping.
Target structure is EDIFACT (xml)
Brgds
Karl Bergströ

Hi Rod.
Go to Apple Menu > System Preferences > Network > Show: Network Port Configurations. Make sure that the configuration used to connect to Internet is at the top of the list. Also, disable any communications/networking configuration enabled, but not in use.
If the above doesn't fix the problem, open Keychain Access > Preferences, and disable Search .Mac For Certificates if it's enabled. Take a look at the following articles for an explanation of why this could fix the problem:
http://www.hawkwings.net/2006/07/18/apple-mail-phones-home-too/
http://www.macgeekery.com/tips/mailapp_doesnt_phone_homeeither

Problem with Javascript and opening a new page

Hi,
I'm developping a website with Java Server Faces.
I've a problem with JavaScript.
I have a table, and each row of that table, has a button, to display more information about that specific row. I want to display this information in a new window. For this I want to use JavaScript.
The new window, of course, needs some information of the other window, to show the right data.
The first time I click the 'more-information-button', it works perfectly, but from than on, he keeps showing the same information...
Here is my jsp-page of the first page (the one with the table):
<?xml version="1.0" encoding="UTF-8"?>
<jsp:root version="1.2" xmlns:f="http://java.sun.com/jsf/core" xmlns:h="http://java.sun.com/jsf/html" xmlns:jsp="http://java.sun.com/JSP/Page">
    <jsp:directive.page contentType="text/html;charset=UTF-8" pageEncoding="UTF-8"/>
    <f:view>
         <f:loadBundle basename="languages.MessageBundle" var="bundle"/>
        <html>
            <head>
                <meta content="no-cache" http-equiv="Cache-Control"/>
                <meta content="no-cache" http-equiv="Pragma"/>
                <title>- UCV-Period -</title>
                <link href="resources/stylesheet.css" rel="stylesheet" type="text/css"/>
            </head>
            <body style="-rave-layout: grid">
                    <h:dataTable binding="#{UcvPeriod.dataTable1}" headerClass="list-header" id="dataTable1" rowClasses="list-row-even,list-row-odd" rows="5"
                        style="left: 24px; top: 168px; position: absolute" value="#{UcvPeriod.dataTable1Model}" var="currentRow">
                        <h:column binding="#{UcvPeriod.column1}" id="column1">
                            <h:outputText binding="#{UcvPeriod.outputUcvPeriod}" id="outputUcvPeriod" value="#{currentRow['UCVPERIOD']}"/>
                            <f:facet name="header">
                                <h:outputText binding="#{UcvPeriod.outputText2}" id="outputText2" value="#{bundle.ucvPeriod_columnHeader_ucvPeriod}"/>
                            </f:facet>
                        </h:column>
                        <h:column binding="#{UcvPeriod.column11}" id="column11">
                            <h:commandButton action="#{UcvPeriod.btnDetails_action}" binding="#{UcvPeriod.btnDetails}" id="btnDetails" value="+" onclick="window.open('Details.jsp')"/>
                            <f:facet name="header">
                                <h:outputText binding="#{UcvPeriod.outputText21}" id="outputText21" value=""/>
                            </f:facet>
                        </h:column>
                    </h:dataTable>
                </h:form>
            </body>
        </html>
    </f:view>
</jsp:root>Here is my action, when someone clicks on the 'more-information-button':
public String bthnDetails_action() {
   Object s = outputUcvPeriod.getValue();
   BigDecimal ucvPeriod = (BigDecimal)outputUcvPeriod.getValue();
   this.getSessionBean().setUcvPeriod(new Integer(ucvPeriod.intValue());
   return "detail_ucvperiod";
}Here is my constructor of the Detailspage.
    public Details() {
         this.txtUcvPeriod.setValue(this.getSessionBean().getUcvPeriod());
    }Here is the navigation part for this part of my faces-config.xml .
<navigation-rule>
   <from-view-id>/UcvPeriod.jsp</from-view-id>
   <navigation-case>
       <from-outcome>detail_ucvperiod</from-outcome>
       <to-view-id>/UcvPeriod.jsp</to-view-id>
   </navigation-case>
</navigation-rule>Thx a lot....
Anneke

See the tutorial "Sharing Data Between Two Pages" at http://devservices.sun.com/premium/jscreator/standard/learning/tutorials/data_sharing_twopages.html and the FAQ "How can I pass data between pages without creating SessionBean variables in Creator?" at http://devservices.sun.com/premium/jscreator/standard/reference/faqs/technical/javasource/passing_data.html. Since you can open a new window when your button is clicked, the tutorial and FAQ will explain ways to pass your data to the new window.

Download problem with JSF: Cannot open PDF-file after opening WORD-file

Hello,
I have a JSP (created with Java Studio Creator) which displays a table with links to different files. Some links open PDF-documents, other for instance DOC-files (msword). I download the file as follows:
public String downloadFile(String fileName) {
try {
int dotIndex = fileName.lastIndexOf('.');
String fileExtension = "";
String contentType = "";
if(dotIndex > 0) {
fileExtension = fileName.substring(dotIndex+1, fileName.length());
contentType=CONTENT_TYPES.get(fileExtension.toUpperCase()).toString();
if(!fileExtension.equals("") && !contentType.equals("")) {
// method that reads file to the byte array
byte[] fileContent = getContentOfFile(new File(fileName));
FacesContext faces = FacesContext.getCurrentInstance();
HttpServletResponse response = (HttpServletResponse) faces.getExternalContext().getResponse();
response.setContentType(contentType);
response.setContentLength(fileContent.length);
response.setHeader("Content-disposition", "inline; filename=\""+fileName+"\"");
try {
ServletOutputStream out;
out = response.getOutputStream();
out.write(fileContent);
} catch (IOException e) {
e.printStackTrace();
faces.responseComplete();
catch(Exception ex) {
return ("!!!ERROR: downloadFile(fileName) - Could not completely download file "+ fileName + ex.getMessage());
return "";
contentType is application/pdf if it`s a PDF-file or application/msword if it`s a word-file.
fileName contains the full file path.
link-properties:
<ui:hyperlink action="#{showOriginalPDF.hyperlinkShowPDF_action}" binding="#{showOriginalPDF.hyperlinkShowPDF}"
id="hyperlinkShowPDF" immediate="true" onClick="testSubmit()" target="_blank" text="#{currentRow.value['display']}"/>
and the code of the JS-function testSubmit() (without this function I couldn�t get the right row selection in the hyperlink-table):
function testSubmit() {
document.getElementById('form1').submit();
return false;
All pdf-links are working fine and the correct document is displayed in a new browser window. but if I open a WORD-document and after that I click on another link to a pdf-file, the WORD-file is loaded again in the new window. Only if I close the window which contains the WORD-document, I can download the correct pdf after that.
Is something wrong with the response header (I tried "attachment" instead of "inline" too but without effect)?
Can anybody help?

More than you asked for but good stuff. Permissions is buried in there somewhere.
Reading
[Resolve startup issues and perform disk maintenance with Disk Utility and fsck|http://docs.info.apple.com/article.html?artnum=106214]
[Using Disk Utility in Mac OS X 10.4.3 or later|http://docs.info.apple.com/article.html?artnum=302672]
[Disk Utility's Repair Disk Permissions 10.0-10.6|http://docs.info.apple.com/article.html?artnum=25751]
"Try Disk Utility" (modified from [http://support.apple.com/kb/TS1417])
1. Insert the Mac OS X Install disc that came with your computer (Edit: Do not use this disc if it is not the same general version as what you have currently on your computer, e.g. use a Tiger disc for a Tiger drive, not a Panther disc), then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk.
Then boot in Safe Mode, (holding Shift key down at bootup; takes longer to boot this way so be patient), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
[Mac OS X: Starting up in Safe Mode|http://docs.info.apple.com/article.html?artnum=107393]
[What is Safe Boot, Safe Mode? (Mac OS X)|http://support.apple.com/kb/HT1564]
[Safe Boot takes longer than normal startup|http://docs.info.apple.com/article.html?artnum=107394]
[Mac OS X 10.4, 10.5- Computer shuts down during Safe Boot|http://support.apple.com/kb/TA24054]

HAS ANYONE HAD A PROBLEM WITH WIRELESS PRINTING ERROR RASTER FILE FAILED

My printer displays error message - opening raster file failed. Has anyone had this happen?

Lightroom should recognize your camera (assume it's LR3 or later) automatically without pointing it to the DCIM directory. The files you are referring to is system file I think and not the photos; thus OS cannot read the file.
Do you have a card reader? For some reason, if you connect your camera into Lightroom directly, sometimes LR doesn't show the preview of your images. Instead you'll get ? next to a gray box. If you don't have a card reader, just plug your camera in, ignore the ? and the gray box (this is LR problem, not your camera), then import them anyway. You should see your test shot once it's done importing.
Weekend Travelers Blog | Eastern Sierra Fall Color Guide

B1WS Problem with error response

We use B1WS to communicate with the SAP system. Communication works fine until a exception occurs. In my special case I try to create a delivery note but there are not enough items on stock. When I add the delivery note the following exeception is raised:
com.sun.xml.internal.messaging.saaj.SOAPExceptionImpl: A Subcode must be namespace-qualified
There is no other information available. When I add the delivery note with SoapUI I get the message from sap the there are not enough items on stock. Is there any way to fix this problem with the webservice?

Thanks for your answer. The exception in this case is no problem for me. The problem is that I cannot get the exception because the SAP response cannot be parsed.
Here is another post of the same problem.
https://java.net/projects/metro/lists/users/archive/2010-08/message/185
I cannot figure out why the response from sap causes this problems.

Problem with COM port opening

I made an application using COM port to dialog with a microcontroleur and i have some troubles with the opening of the port. i developed it under window XP pro and labview 6.1 and i have no problem when i launch my application on an XP PC having labview installed or on a window 98 PC without labview (just the runtime engine). But when i launch it on an XP pc with only the runtime engine, it seems to launch correctly but in fact, there is a problem with the COM port opening. The menu allowing to chose the port number is inactive and has no effect, like if the software wouldn't recognize the material port on the PC. And consequently, nothing happens when the dialog should start.
Thank tou for your precious help
Julien LEGRAND
French Natio
nal Institute for Sea Reseach

Is the VISA run-time engine installed? I don't understand why it would work on the win98 machine unless you have an older installation of it there.

Problems with Mac email. Friends getting failed delivery notifications.

Hi. Just logging into Apple community for the first time. I have a Mac Book Air. Contacts are saying that they have problems emailing me. I'm just using the standard Mac email. They say they are getting failed delivery messages. Is there anything I can do?

Welcome!
This is most probably a problem that should be addressed to your mail service provider. I doubt very much it is a problem with your Mac.
You could try sending yourself an email. If that "bounces" back to you as undeliverable it would be useful information to give your MSP.
Good luck.

Problem with desaturation when opened in ACR

When I open a .jpg image as camera raw (v. 6.2.0.29), then immediately save that image as a .jpg (quality 12) from CS5 (v. 12.0.1x32) without any edits (but as a different file name), the newly saved .jpg is significantly desaturated in color when compared with the original. This does not occur if I open the .jpg without going through ACR and then immediately save (as a new file name) without any edits.
In puzzling over this, I've also noticed that when I open a .jpg in CS5 as a camera raw, then immediately open the same .jpg without going through camera raw and compare them side-by-side, there are significant differences between the two histograms.
What in the world am I doing wrong? Since it only happens when I open a .jpg as camera raw, and not in CS5 apart from ACR, I'm guessing that it has to be something in ACR. However, I have not yet been able to find a problem with the settings in ACR, and no changes I have made in ACR seem to affect the outcome.
Any ideas what I'm doing wrong, or where I might go looking?
Thanks in advance...
ACB

Check the ACR output colorspace; it's identified in the link at center bottom. If it's ProPhoto then your jpegs will look very unsaturated when viewed in a non-color managed application, such as Internet Explorer. Click on the link to change to sRGB for general email and web output.
Richard Southworth

Is anyone else having problems with a slow opening of pdf documents using reader?

Help, I purchased a new desk top PC with windows 8, it is taking mins rather than seconds to open up documents and it takes even longer printing documents.
I have installed uninstalled, changed printers and nothing helps. When I use another other readers documents open in seconds.
I never had this problem with my old windows 7 setup.

Okay, Just off the phone with ATT. The visual voicemail server is down and has been down for a couple of days. In order for them to respond and escalate an issue a certain number of clients need to be affected. That happened at 950am yesterday morning. According to the gentlemen I spoke with, they have no idea when it will be repaired. He did offer a monetary compensation for the inconvenience.

Installation problem with NW'04 SR1: database connection failed

Hi all,
while installing NW '04 SR1 on Windows Server 2003 SP1 and MS SQL Server 2000 SP4 I ran into an error related to the database connection. While performing the step "Load Java Database content" SAPinst crashes with the message
com.sap.sql.log.OpenSQLException: Could not load class com.ddtek.jdbc.sqlserver.SQLServerDriver.
The connection to the SLQ Server with e.g. the Query Analyzer is OK. I had a problem with this installation setup before (have a look at the corresponding <a href="https://forums.sdn.sap.com/thread.jspa?threadID=338638&tstart=0">thread</a> ), the JDBC drivers where missing on the installation master but after copying them in the right direction the installation went on with no problem up to this point...
Has anybody an idea what could have happened here? Is this maybe a problem connected to the one I recently had
Below I attached the sapinst.log and jload.log with more detailed messages.
sapinst.log ###########
INFO 2007-03-12 22:06:24
Working directory changed to C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_~1\ONE_HOST.
INFO 2007-03-12 22:06:24
Output of D:\Java/bin/java.exe '-classpath' './sharedlib/antlr.jar;./sharedlib/exception.jar;./sharedlib/jddi.jar;./sharedlib/jload.jar;./sharedlib/logging.jar;./sharedlib/offlineconfiguration.jar;./sharedlib/opensqlsta.jar;./sharedlib/tc_sec_secstorefs.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\base.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\util.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\spy.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jce_export.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jsse.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_smime.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_ssl.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/w3c_http.jar' '-showversion' '-Xmx512m' 'com.sap.inst.jload.Jload' '-sec' 'WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key' '-dataDir' 'S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP' '-job' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML' '-log' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log' is written to the logfile C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_~1\ONE_HOST/jload.java.log.
WARNING 2007-03-12 22:06:26
Execution of the command "D:\Java/bin/java.exe '-classpath' './sharedlib/antlr.jar;./sharedlib/exception.jar;./sharedlib/jddi.jar;./sharedlib/jload.jar;./sharedlib/logging.jar;./sharedlib/offlineconfiguration.jar;./sharedlib/opensqlsta.jar;./sharedlib/tc_sec_secstorefs.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\base.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\util.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\spy.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jce_export.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jsse.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_smime.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_ssl.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/w3c_http.jar' '-showversion' '-Xmx512m' 'com.sap.inst.jload.Jload' '-sec' 'WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key' '-dataDir' 'S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP' '-job' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML' '-log' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log'" finished with return code 1. Output:
java version "1.4.2_13"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_13-b06)
Java HotSpot(TM) Client VM (build 1.4.2_13-b06, mixed mode)
12.03.2007 22:06:25 com.sap.inst.jload.Jload main
INFO: Jload -sec WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key -dataDir S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP -job C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML -log C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log
12.03.2007 22:06:26 com.sap.inst.jload.Jload main
SCHWERWIEGEND: couldn't connect to DB
com.sap.sql.log.OpenSQLException: Could not load class com.ddtek.jdbc.sqlserver.SQLServerDriver.
ERROR 2007-03-12 22:06:26
CJS-20065 Execution of JLoad tool 'D:\Java/bin/java.exe '-classpath' './sharedlib/antlr.jar;./sharedlib/exception.jar;./sharedlib/jddi.jar;./sharedlib/jload.jar;./sharedlib/logging.jar;./sharedlib/offlineconfiguration.jar;./sharedlib/opensqlsta.jar;./sharedlib/tc_sec_secstorefs.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\base.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\util.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\spy.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jce_export.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jsse.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_smime.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_ssl.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/w3c_http.jar' '-showversion' '-Xmx512m' 'com.sap.inst.jload.Jload' '-sec' 'WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key' '-dataDir' 'S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP' '-job' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML' '-log' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log'' aborts with returncode 1. Check 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log' and 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.java.log' for more information.
jload.log ###########
12.03.07 22:06 com.sap.inst.jload.Jload main
INFO: Jload -sec WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key -dataDir S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP -job C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML -log C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log
12.03.07 22:06 com.sap.inst.jload.Jload main
SEVERE: couldn't connect to DB
com.sap.sql.log.OpenSQLException: Could not load class com.ddtek.jdbc.sqlserver.SQLServerDriver.
Best regards,
Bernd

Hello Kairat,
Please follow the below mentioned guide to install it.
Check all the parameters to set and run pre requisite checker before starting installation.
Keep in mind that before starting any SAP installation you should always run prerequisite checker.
https://websmp205.sap-ag.de/instguides --> SAP Netweaver -->SAP Netweaver 7.0 -- > Installations --> EHP2
Regards,
Amit Barnawal

Has anyone solved the problem with " lagging " response when opening nay app ?

since " upgrading " ( if you can call it that ! ) to IOS7 on iPhone 4, everyone is complaining about the delay when opening any App. At the Genius bar at Apple store they referred to this as " lagging ". After a quick diagnostic of my phone, they suggested a full Restore. Big waste of my time and data. No change whatsoever. I had to go through the full process of syncronizing music and photos and resetting everything.
I also talked about the new Calendar and especially the Reminders. The new Reminders App is quite simply horrible and no longer attractive and consequently a useless Icon. Even the calendar is labor intensive. I tried to register a future doctor's appointment and the receptionist finally said " Why dont I just call you a day befpre ? ". How Apple managed to make something so simple so complicated is beyond me. The rotary calendar anc clock is a joke.
It bears repeating, Apple makes too many unnecessary design changes, I dont want to have to invest all this time going to work shops to figure out what they have done with basic apps, especially if its to find out what I already figured out.
I would however like to know what Apple intends to do about the lagging. I have another 18 months on the iPhone 4.

No. It was designed to work that way.
Allan

Problem with interspersed response -- opening vertical space fail

Similar Messages

Maybe you are looking for