Problem with Intro to IDVD Help!!!

I have created an IDVD form Iphoto pictures are great music is good and when I preview its fine. When I burn it and put into the DVD player the last picture of the slide shows up and then right after the intro appears. what am I doing wrong? Help need this soon.

How many photos are in your slideshow?
See if this helps:
http://discussions.apple.com/thread.jspa?threadID=1017735&tstart=0

Similar Messages

  • Encore CS4 (version 4.0.0.258) will not finish burning to blu-ray disc when using a menu template.  DVD burning works fine.  Anyone know the problem with blu-ray?  HELP!

    Encore CS4 (version 4.0.0.258) will not finish burning to blu-ray disc when using a menu template.   DVD burning works fine with menu template.  Anyone know the problem with blu-ray?  HELP!

    For CS4 you must update the Roxio component, especially with Win8
    http://forums.adobe.com/thread/1309029 http://docs.roxio.com/patches/pxengine4_18_16a.zip
    http://corel.force.com/roxio/articles/en_US/Master_Article/000012592-PX-Engine-Description -and-Download

  • I have a problem with my microphone, please help if you can

    Hello everyone.
    I have a problem with my microphone. After i bougth Creative's sound card "Sound blaster X-Fi Xtreme Audio" and installed it, everything was allright and my microphone was working great, but this was when I used Windows XP, when i started to use Windows 7, it suddenly was very weak and i almost didn't heard it.
    Currently, I have bouth Windows XP and Windows 7 installed, so I know the microphone is working when I am switching up between the OS, because it still works good on Windows XP.
    If you can help please tell me.
    I am using Windows 7 64 bit, I made sure the flexijack settings in the Audio controll panel are set to microphone and not line in, in the Windows 7 audio controll I have set the microphone volum to maximum and made sure it is configured properly.
    Thank you for helping.

    Originally Posted by tav2000
    Hello everyone.
    I have a problem with my microphone. After i bougth Creative's sound card "Sound blaster X-Fi Xtreme Audio" and installed it, everything was allright and my microphone was working great, but this was when I used Windows XP, when i started to use Windows 7, it suddenly was very weak and i almost didn't heard it.
    Currently, I have bouth Windows XP and Windows 7 installed, so I know the microphone is working when I am switching up between the OS, because it still works good on Windows XP.
    If you can help please tell me.
    I am using Windows 7 64 bit, I made sure the flexijack settings in the Audio controll panel are set to microphone and not line in, in the Windows 7 audio controll I have set the microphone volum to maximum and made sure it is configured properly.
    Thank you for helping.
    Hi tav,
    While waiting for other forum members to post..
    Perhaps you havent installed the latest drivers yet? (link HERE)
    Cheers!

  • Bought a 2nd hand iphone4. On the screen it shows "Connect to itunes" after connecting it shows in my itunes "There is a problem with your iphone" Pls help me what to do next? Thanks

    Hi. I would really appreciate if someone could help me find a way to solve my problem. I bought a second hand iphone4 from my friend's friend. I fully trust my friend coz she said this iphone is working but it was handed to her lowbat so i get home i recharge it immediately and after charging it, i open and it shows to select language and country and i did select. After this it shows on the screen "Connect to itunes". Then i plug it in to my laptop and connect to itunes. It shows in my itunes " There is a problem with your iphone". Please visit the Service Answer Center to find answers to all your questions etc. To find your nearest Apple Store pls click here. I know i was so stupid to fully trust and paid before i check the phone. Can anybody pls help me with my problem.

    It's probably broken. Is there an error number displayed by iTunes?

  • Printing problem with Photoshop cs4, need help

    I'm using PS CS4, with a Canon Pixma iP4200 and Mac os 10.6.2.  I CAN print from other programs such as TextEdit or Pages.  And my printer prints a test page without any problems.  However, when I try to print something from PhotoShop, the printer dialogue box opens, I see the image in the preview and the page rolls through my printer...without anything on it.  Does anybody know the reason for this??  Thank you for your help. 

    I haven't heard of anyone else with those specific symptoms.
    But another poster has had problems with his Canon 9900 not printing (but no blank page).
    The first thing to do is make sure you are using the Canon drivers and not the GutenPrint/GimpPrint drivers.
    After that, you probably need to check with Canon.

  • Problems with Boot Camp - PLEASE HELP!

    I'm having problems with Boot Camp. Here's what's happening. I ran Boot Camp Assistant, partitioning a 32GB BOOTCAMP drive. I insert my copy of XP and start the installation. My MBP restarts and boots into the Windows Setup. I let it run through the initial actions. I press ENTER to proceed, F8 to accept the license agreement, then when I get to the part where I should be able to select the Partition 3 BOOTCAMP drive (as it says in the Apple Boot Camp Manual) there is only a Partition 1 Unknown drive. It is the only drive to choose from and its a C: drive. I can't figure out why after I run boot camp the partitioned drive doesn't appear as an option in the windows installation. Please help!!!
    Message was edited by: CarlConti08

    Boot into Leo, start Disk Utility and you should see two partitions, your Leo partition and a Fat32 partition of 32GB at the end of the drive.
    If not, boot camp didn't create it for some reason. If it is there then check it with DU and make sure its OK.
    While your in there give it a name so you can easily identify it in your windows installer.
    If there is no partition, create one using Disk Utility at the END if the drive. make sure you create it as a msdos (Fat32) partition and give it a name. The name cannot be more than 11 characters must be comprised of numbers and/or letters (no special characters).
    Verify it before exiting DU.
    Put in windows install disk, reboot - hold option key after the chime until you see the boot screen - select windows CD to begin install.
    Don't forget to install Leo windows drivers after installing windows.
    Kj

  • I'm still having problems with XUL Runner - please help am getting desperate!

    I recently sought help over a problem I am having with FF. When I try and load it, I get a message telling me that XUL runner 1.9.2.11 is not compatible with 1.9.2.12. The advice I received was to do a clean install. I have done this a number of times - using the Uninstall option in Control Panel as well as running the uninstall utility in the Firefox program folder. Each time I reinstall, and get the same problem. The only difference is that a few days ago I was installing FF 3.6.10, and that gave the error message that XUL runner 1.9.2.11 was not compatible with 1.9.2.10.
    I have FF set as my default browser, so when I click on links in e-mails, etc. I get the same failure to load symptoms. However, I found by chance that FF works OK in conjunction with System Mechanic 10 - a maintenance utility I have on my machine. If I select the on-line help option from that Menu, FF loads and runs OK. I can open new tabs and have no problem loading other pages. However, even with FF open, if I click a link in an e-mail, I get the XUL Runner error message.
    Although not all symptoms are the same, I am also having problems with IE8. When I run the program it loads, shows a 'connecting' message in the tab header, then closes. If I uninstall FF, then System Mechanic selects IE8 as the default browser, and as with FF, loads OK.
    Chrome and Safari both run OK (thankfully). there must be someone out there who knows what this all points to - is that person you?!
    Note: Trouble shooting information retrieved using FF when opened with System Mechanic.

    If you have such problems then you need remove the Firefox program folder before installing a new copy of the full Firefox installer.
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.

  • Problem with A300, Ask for help

    Hello from Bulgaria!
    In the beginning I want to apologize if I bother you at the wrong place. This was the only place i found in all your sites at "Contact us" menu. If I'm in mistake please redirect me to the right e-mail or topic.
    I have extremely big problem with one of your products, and I'm afraid I can't solve him without your help. Few months ago I bought a laptop witch exact model is TOSHIBA SATTELITE PRO A300 - 1GQ. Model No.: PSAG1E - 00900NF3, Serial No.: 88549776Q. If you need another information I can tell you everything. Badly i got serious virus and the situation reach fall windows start. I know about integrated Toshiba Recovery and I used it. Windows Vista was successfully installed but the partion was not formated. Some of the system files was still corrupted and I resorted to Toshiba DVD comming with the laptop. I ran it, there was no problems until I saw Windows XP logo. I was pretty surprised because I expected Windows Vista like original one which came with the laptop from the shop. Another problem was that that installation formated whole HDD including partitions different from C:\ with Windows system files. All of my data is gone without I could be able to do something. However, th
    e question is that I need Windows Vista very badly and I dont want XP. I tried to use hidden partition with Toshiba recovery again but I cant no longer access it. So I left with original XP with drivers integrated with it. The problem is that I need Vista with integrated drivers. It wouldn't be hard also if I found that drivers in your sites. Nowhere in your sites with download I could find the exact model to take it. The nearest was A210 which I think is pretty far from mine.
    And it the end I ask for help if you can tell me where to download the needed drivers or anyway to put Vista back. Preliminary I thank you and I apologize again for the disturbing. I need that information badly and I don't know where I can get it from. At least show me valid e-mail to contact with Toshiba Support.

    Satellite Pro A300-1GQ 
    This was the only place i found in all your sites at "Contact us" menu. If I'm in mistake please redirect me to the right e-mail or topic.
    These forums are for United States computers. For that European machine, you probably want to post elsewhere.
       Toshiba Support Forums Europe 
    You need to obtain a recovery disc that restores the hard drive to factory-new.
    -Jerry

  • Sony Liveview problem with battery drain!Help

    Please help, i have just bought Liveview, i charged full for 4h, when i connected, battery drain very fast in 3 - 4 minutes when i use plugins after that Liveview turn off?? Please help me how to fix ít, i can't use ít , i think it have a problem with firmware! I use Xperia ion ics 4.0.4

    If the battery is only lasting 10 mins I would advise returning this particular device so that it may be assessed.
    What are your thoughts about this forum? Let us know by doing this short survey.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Problems with edits in iDVD

    I have a project completed in iMovie and it consists of 3 clips. One with 9 chapters and 2, single chapter clips. I edit out some of the beginning of each of those 2 clips, but when I try to add them to iDVD, the edits do not show and the entire, unedited clip shows instead.
    This is part of a gift for a friend. I converted a PAL DVD to NTSC and that was fine. I created menus and added effects and sound to the menus just fine, but I am having problems with the edits of the clips showing up.

    I am quite sure that the problem is in my terminology, so thanks for your patience.
    I am using the latest versions, with all updates applied, of the iLife '05 suite.
    As a video newbie, this has been quite an undertaking for me, so let me backtrack a bit. I have a PAL DVD that I ripped three titles from - the main feature, an interview and preview of another DVD - using Mac the Ripper. I then used Handbrake to convert them from PAL to NTSC and they were saved as .MP4 files. These are the raw, unedited files that I brought into iMovie by dragging and dropping them into the grid on the right side of the main iMovie screen.
    I dragged the first unedited file - the main feature - to the bottom of the main window. I marked that with chapters and dragged it back to the grid. I then took the second file - the interview - and made some edits to the beginning and ending points and the dragged it back up to the grid. Same thing with the third file which is a preview.
    I then opened iDVD and dragged the files from the media folders which I now know is incorrect.
    To correct this, I took my three edited files, dragged them in the order I wanted them to be in to the timeline on the bottom of the iMovie screen. I added new chapter marks for the interview and preview files, then and started my iDVD project using the "share" option from the "file" menu.
    That seems to be cleared up, and now my edits are showing, but now, when I start the iDVD part of the project, it splits the "chapter select" menu into two different screens and adds the two "featurettes" to that.
    I want to have it set up like this -
    Main Menu - Play All, Chapter Select, and Special Features
    Chapter Select - shows chapters 1 through 9 to choose from.
    Special Features - shows "Interview" and "Preview" to choose from.
    I don't seem to know how to get the interview and preview to show up as selections from the "special features" menu that I created. The only way I could do this is to drag the raw files into iDVD, but then I lose my edits.

  • Having problems with USB cable, please HELP!

    While trying to download aim/aol I was having problems with my USB cable and my phone being connected, it was like they were showing they were conneted but when I tried to download aim it said no drivers were recognised. My phone was giving me the option when the USB cable was plugged in asking me if I wantd to do something to do with the media mass storage.
    Anyway, once the drivers were downloaded to my comp and I plugged USB cable into my phone and comp i'm no longer being asked on my blackberry about the mass storage, my phone doesn't seem to be recogniaing tht it's linked up to my computer at all even though it's showing the little plug thing in my blackberry and coming up on the computer.
    Is there anybody out there who can help me?!
    Please!
    Cheers!

    Go to Options -> Media Card -> Mass Storage Mode Support: On
    tanzim                                                                                  
    If your query is resolved then please click on “Accept as Solution”
    Click on the LIKE on the bottom right if the post deserves credit

  • Jpl problems with the lombard please help........

    It takes 1+1 starts (the last time) or 111 before and 11+1+1+11 another.
    But it will start up and it run well in 10.4.8 sometimes it crash (lately since the problem start never before) but other wise runs good.
    I have looking into your other similar threads and don't since to unhesitant them well maybe mine is different i hope so.
    Another thing they all end up on the logic board no before going to the OS 9 test(?) I may right.
    Also my battery don't take charge anymore never used that much but is good to have it.
    I hope you have the time to look at this thread and help me.
    And happy New Year to you and all of you too.
    nhylo

    nhylo,
    Unfortunately this error message is not good news. A common problem with Lombards is a failure of the L2 cache (cache memory) located on the microprocessor card. The 512K L2 cache will often appear/disappear in the System Profiler but nonetheless is still bad. The only fix is a replacement microprocessor card.
    http://docs.info.apple.com/article.html?artnum=51159
    As far as starting up, usually pressing the power manager reset button on the back panel will allow a successful start.
    When you buy a replacement, you must make sure it can run OSX with memory in the top slot. Frankly I don't know how you can be sure of this except to purchase the card from a vendor who guarantees his product.

  • Airport Express problem with iMac G5 iSight - help needed!

    I bought an Airport Express (AX) last week, upgraded my OS to Leopard and installed Airport Utility fine. I could join my existing wireless network and everything worked fine for streaming itunes through my stereo. But this week Airport Utility has stopped being able to find the AX and I can't work out why - really need some help! Its in the same place as last week, close to the computer, and I tried another location right next to the Imac but didn't work. When I restore factory settings Airport Utility does recognise the device, and allows me to update settings for wirelessly connecting to my existing wireless network, so the light on the AX is solid green. But then AU again says it cannot find any AX wireless device. Can anyone tell me what I'm doing wrong???

    Hi I'm still battling with this - have connected the AX to my Imac via ethernet and it shows up fine in Airport Utility. Status light is green and it says its set up to connect to my existing wireless network using wireless connection. Security in Network Preferences is the same for both: WPA2 Personal.
    So I don't think there's a problem with the AX, and my current wireless network (BT Home Hub) is working fine.
    And when I restore factory settings Airport Utility can see the AX before updating settings so the wireless side of AX must work too.
    I'm figuring it must be something about the settings that mean AU can't see it anymore. But I can't work out what, since security is the same.
    Any ideas would be great!

  • Problem with long report - please help

    We are using crystal report with ASP.NET/C# (Visual Studio 2005).
    Using Crystal report viewer control on the web page to have previews.
    A particular report is for say 6000 pages. I can not preview the report on the web page.
    I have the following questions:
    1. Does it make sense to think of previewing such a huge report on web page?
    2. What should be the alternate?
    3. I tried "Export to PDF" technique, but it failed.
    Thanks in advance for your help.
    Regards,
    Kangkan

    I tried to use exportToPDF technique. It works when the number of page is less. But just hangs up when the number of pages is high. I am working on finding the breaking number.
    There is no problem with HD space as well.
    I also tried to print the report to a printer on the server directly. I used the printer as "Adobe PDF" to use Acrobat Distiller to create the PDF. It starts up and asks for the destination for the PDF file also. Once it starts the system shown an error and the Microsoft Feedback Assistant for failed application comes up.
    I am now trying to print the pages to a network printer connected to the server. Shall get back with latest update after sometime.
    Please do look into other possibilities or points where I might have committed an mistake.
    Thanks and regards,
    Kangkan

  • Problem with my OC4J, please help

    Hi
    i have one big problem with my OC4J Application Server: i create an instance, then i deployed my appliation with the .ear file. i have 15 page uix. my problem is when i want to see my application from the browser, some of the page run correctly ans some other no; in other world the one that don't run, in reality it run but it display the last one that run correctly.
    i hope that i m celar.
    can you help me.
    Thank you

    Islem,
    Please post your log file content as well as server version, OS etc. (see:
    http://forums.oracle.com/forums/ann.jspa?annID=818-Michael

Maybe you are looking for