Problem with invoice posting

Hi .. i,m facing an issue with intercompany Invoice posting .
I'm having delivery note as a reference to that invoice but im getting error message that delivery note doesnot exist..
i have entered correct delivery note..
how this can b overcome?
Thanks and regards..
Manoj

hi,
for having del. note as ref in MIRO, first you must have entered the same del. note while making GR (MIGO), then only that is possible.
Have you done that,
other wise PO ref is the best & will work anyway
Regards
AK

Similar Messages

Problem with depreciation posting for an asset with a '0' net book value.

Hi,
I have a problem with depreciation posting on one asset. I think it should not be calculated and posted at all.
On 1st November 2010 (our Fiscal year starts on 1st November) there was acquisition posted to an asset and then it was reversed on the same day - so the net book value was '0'.
In AFAB depreciation run for April 2011 - it posted depreciatoion of 0.01 Euro, so now the book value is -0.01.
Do you know how this could have happened and what can I do to get the value of this asset back to 0?
Thank you,
Karol

Hi Murlidhar,
Thank you for your reply.
I just have one doubt - as depreciation of 0.01 Eur was posted in previous period leaving net value of asset equal to -0.01 Eur.
Shouldn't I get ritd of this asset value before I proceed with the steps you suggested?
I think it is not possible to reverse the depreciation - so I struggle to find a way to bring asset value back to zero.
Thank you,
Karol

Problem with Invoice

Hi Experts,
Iam facing a problem with invoice document with batch wise . If I enter one batch it taking 2 mins to add the the invoice document.i have removed Sp transaction notification and format searches even then it is taking 2 mins. So kindly give me solution how to solve this issue.
client system Os Windows 7
Ram 4 GB
No addons connected and Lan was working without any abrupts.
Regards
Jenny

Hi Jenny,
Is this issue happen all the machines or it happens only at one specific machine?
If it is happens on a specific machine, try to reconfigure the lan settings of the machine or reinstall the B1 client.
You can check the sbo-common sevt table. this always triggered in some versions. this can cause performance issues.
I hope it helps,
János

Problems with the posting period....

Hi guys,
every once in a while the old problem with the posting periods occurs. This morning it hit me and I went out to repair it.
Starting out from MMRV I checked the open period and it said 062009.
Using MMPV, by mistake, I opened 112009, so that I'm able to post to 112009 PLUS the previous period 102009 (which is ok so far). Later on I checked OB52 to see, if finance is not the problem. The opened period lasts from 012009 to 122009.
Long story short: everything seems perfectly alright, however it still doesn't work. It says: Posting only possible in periods 2009/11 and 2009/10 in company code 1000
I don't see where there could be a problem now...
Any help is greatly appreciated!
Thx & regards,
Bobby

Hi,
It is possible to re-open a previously closed period. However, it is NOT advisable to do so because the valuation data of the previous period could be affected.
In general, it is only safe to reopen a previously closed period when no material postings have been done after the period shifting to the new period.
If there has already been postings after the period shifting to the new period, reverting the period back will cause database inconsistencies in the history tables.
If you decide to proceed with this process, you can use the program RMMMINIT, but, please review the documentation of this program first!! and the check the SAP notes 487381 (for the error message that you are receiving) and the 369637 (for an explanation about the inconsistencies that will be generated.
Steps are as below;
Go to Transaction Code SE38
Enter program name RMMMINIT
Execute or press F8 function button
Enter your company code (From and To)
Enter relevant date: Say 01/10/2009 for Oct. 2009 month to be opened as of now
That means, user can post for the month of sept 2009 as well as Oct. 2009
Refer SAP Note No. 487381 for more details.
As per SAP Notes 487381 ( If the periods are opened in advance in mmpv to again change it to current period the following process should be follow ), Go to Tcode MMPI, then go to menu bar and select system -> user profile->owndata.In that screen , under the parameters tab enter MMPI_READ_NOTE in Parameter ID field and enter, then under short description you will get Initialise period. Next Save.
Again go to MMPI enter company code, period and year and execute.
Other way of doing it is follow these steps: ( *TRY in Sandbox But do not try in PRODUCTION SYSTEM*)
1. Use t.code: OX18, and delete the plants assigned to your CO.Cd and save.
2. Use t.code: OMSY and change the posting period to the one u want and save.
3.Go to OX18 and assign the plants you have deleted in step 1.and save.
Regards,
Biju K

Has anyone experienced a problem with FB posting since the installation of iOS 6?

Since the installation of iOS 6, I noticed that when I post a photo on FaceBook it does not show that post using my iPad or iPhone. I posted using my iMac and within seconds it showed up on two devices mentioned above. Please help.

Hello,
I am currently an owner of an Ipod Touch 4th generation. I see you are having problems with your Ipod Touch/Ipad/Iphone/Ipod Classic, so I will try to find a solution to your problem.
Do the IOS update (the one that is the latest)
Reset All Settings: SETTINGS>GENERAL>RESET>RESET ALL SETTINGS
Use it until it dies (automatically shuts off)
Plug into Charge
Leave it 1.5 hours or longer after it reaches 100% --> Undisturbed (preferably overnight)
Give it a few days to Calibrate
This has helped me on my Ipod Touch 4th generation, running IOS 6.0.1
Hope that helps!
If none of the above solutions work, can you please respond back ASAP as I will try to find another solution to your problem (This might even help others with the same problem!)
Cheers!
Pizza98704

Workflow with invoice posting

Hello,
I have to trigger a workflow at the time of invoice posting. I have tried business object BUS2081, BKPF & BSEG. The workflow is triggered after MIRO but when I try to post using FB60 the workflow is not triggered.
Can anyone help, please
Thanks,
Scott

Hi Scott:
Did your solution work for workflow with FB60 ? I was initially tryng to find a user exit where I could use WF ABAP functions to raise an event to force the triggerrng of workflow to send notification e-mails for Invoice approvals.
I am trying to do something similiar to what you did, but did not want to do the following set-up below if it did not work for you.
<i><b>"Financial Accounting - AR and AP - Business transactions - Incoming Invoices/ Credit Memos - Carry Out and Check Settings for Document Parking
The above node has to be configured for events to be triggered through FB60
If you are using document parking Workflow then the business object to be used is FIPP & not BUS2081, BKPF or BSEG & if you maintain the WF settings as mentioned by Kiran, I think it should work"</b></i>
Thanks,
Ernesto

Audio problems with Rezound, post software update

Hi All,
I had my Rezound for about a month before the firmware upgrade and never experienced any issues with audio playback through my headphones. However, since my phone was updated I'm getting consistent audio glitches. There are two types that I've noticed. The first is a high pitched whine that last for 2-10 seconds before fading out; this has happened consistently since the update. The second is a wave of static that's gets louder and messier until I pull out my headphones and I noticed this yesterday for the first time. I thought the firmware update was in part going to fix the Rezound's audio problem.
Has anyone else had these audio issues since the firmware update?
Is this currently a fixable problem?
Thanks!

I also had no problems whatsoever prior to the update, including no audio issues. I have also recently noticed audio problems post update. These problems seem to be very intermittent and I haven't been able to connect their appearance to anything specific. I have noticed 2 problems, the wave of static problem and also a loud "click" that is very noticeable but kind of in the background. I'm ready to pursue other avenues of resolution for all the problems with this phone which I originally loved!! Verizon's answer is "you're stuck with it" or "we're working on it" or "we will send you a used phone" (so I can enjoy experiencing the same problems on a phone from who knows where with who knows what history after paying $300 dollars just 2 months ago)!! I am so tired of having to deal with the boot-looping problem!!! Why is it acceptable to sell or create a defective pricey electronic device with complete impunity? This would not be acceptable and would result in immediate and consequential retaliation in my career! Any one want to discuss what we might be able to do?

Problem with Editing Post !!!!

I am unable to edit my post?
Each time I try to go back and edit a word etc..
the board will generate a new posting instead of changing what
I just edited!!!
If they can't get it right I'll just stay off the site!
Apple should take the time to fix these bugs!
Looks like they already turned over Tech Support to this Discussion forum
If they don’t fix it, this may be my last post.
Compaq PC / 1GB Ipod Nano & 80GB Video Windows XP Pent 2.53 GHZ 512MHZ MB RAM 120GB HD

One sure way to end up with multiple posts of the same thing is to use the Back button to access the just-written post - each time that is done and the Post Message button is clicked, a new iteration of the message will be generated.
Using the Edit button should not generate a fresh copy of the message; to help notice where one is, the Edit page is a bit different than the original create message page, and uses a "Save" button rather than a "Post Message" button.

Problem with the Posting Date of Goods Receipt or Invoice Receipt for PO

Hi All,
I am working on 2LIS_02_SCL - Purchasing Data (Schedule Line Level),
For our report, we should get the scheduled PO quantity,actual PO qty, Scheduled date and actual date in the report.
we are getting all these fields from the above extractor...
For a PO which is opened (Delivery Completion indicator not set) - we where getting all field as in ECC(ME23N)
But for a PO which is finished(Delivery completion indicator is set) - we where are getting actual GR qty,planned qty,planned or scheduled date at schedule line level.But we are not getting the Posting Date of Goods Receipt or Invoice Receipt for PO from history EKBE for all the schedule line.
ex:
for open PO
PO num         item num   schedule line    Planned date   actual date difference actual qty planned qty difference
450002432   10                        1              01/10/2011    02/10/2011       1 day          100             100             0
                                                 2              02/10/2011    04/10/2011       2 days        200             400            200
                                                 3              03/10/2011    07/10/2011       4 days         300            300              0
For the same PO when it is Finished or completed(Delivery completion indicator is set)
PO num         item num   schedule line    Planned date   actual date difference actual qty planned qty difference
450002432   10                        1              01/10/2011    07/10/2011       6 day          100             100             0
                                                 2              02/10/2011    07/10/2011       5 days        200             400            200
                                                                03/10/2011    07/10/2011       4 days         300            300              0
for all the schedule line its displaying the last posting date(i think its taking from EKKO table)
Is there any possibility to get that posting date history ....

You can have multiple receipts against a PO schedule line, but this extractor is not meant to go to that level of granularity. Please try to use 2lis_02_sgr instead which provides goods receipts per PO schedule line.

Problem in invoice posting in accounts.

Dear Experts,
I have created a new account key STP and assigned it with the specific G/L account in VKOA.
But during invoice generation the invoice amount is not getting posted into accounts. Instead of that system is throwing an error message 'Posting keys for account determination for transaction STP do not exist'.
Please suggest how to solve this problem.
Thanks & regards,
Rupam.
Edited by: RUPAM KR SEN on Nov 3, 2009 11:57 AM

Hi Laxmipati,
I have gone through this thread. I am getting confused as because the solution has been provided for the account key 'ESD' and it is different from the account key that I have created ( STP ).My pricing procedure is not standard it is customized pricing.
Please clarify me.
Thanks & regards,
Rupam.
Edited by: RUPAM KR SEN on Nov 3, 2009 12:49 PM
Edited by: RUPAM KR SEN on Nov 3, 2009 12:50 PM

Problem with invoice Document and Table DFKKOP

Hi Guyz,
While reversing the Invoice doc, i receives an error
"Balance in Document currency is not Zero, Posting not possible", in long text it shows contact your system administrator.
and one more thing, while discussing this issue i found out that there is problem in DFKKOP table, this invoice docs are not visible in this table???? any reason for that i need this to be solved ASAP.
Regards
Shilpa.K

Thanks for the reply Bill,
Here is detail for the issue above, I know that i need to see that in ERDK, so i have posted this issue in detail hope you get the clear picture now.
There are around 231 Invoice documents for which there is no record in DFKKOP table.
Since these records are not available in such a important table like DFKKOP, it is not coming into account display (TCODE: FPL9) also. So we are not able to perform any financial transaction for these contract accounts based on these invoice documents.
Now we need to find out all the details and document numbers which is required to be present in table DFKKOP related to these invoice documents, so that it can be inserted into the table Manually.
I think this is the solution for now. to update the table manually.
Regards
Shilpa.K

Problem with invoice reversal.

Hello, I have the following question:
I´m trying to reverse an invoice through MR8M trx. The PO is referinf to an fixed asset.
When I try to reversed the invoice the system show me the following message:
"Balance for transaction Type group 10 negative for the area 01"
I think it has relationship with the fixed assets and valoration area.
But i really not sure
Please, someone know the message or to what it refering?
Thanks in advance for your help
Regards
Enzo

Hi Enzo,
Please have a look at the following SAP Notes:
207679 AA629 for reversal goods receipt (foreign curency)
546228 FAQ - MM posting with fixed asset integration
302756 AA629, AA641 for reversal of GR from previous year
139899 AA629 when posting MR01/MRHR/MIRO invoice receipt
Assign points if it useful.
Regards
Ravinagh Boni

Problem with invoice number in query

Hi,
I got problem in query with the Invoice number
There are two columns in the cube 1) Invoice number 2) Count
For the key figure Count I used aggregation option as counter on Invoice number
When I ran the query on this cube it is showing one extra count
For example
                    Invoice number                   Count
          10000                    1
          10001                    1
          --                    1
          --                    1
          --                    1
In query it is showing count as 3

Are you loading from a falt file.
It seems that an extra record got loaded which desnt have invoice no but count =1

Problem With Invoice Generation using code

I have some sales orders - I put an button on the below of the sales order so that it will create the invoice through code. I CANT USE COPYTO option of sales order since i am adjusting some values while pressing the button.
What i have done....
1. Using get by key i read values from sales order.
2. Using objects of sales order and invoice i am binding values.
-- On Header
> Card code
> Card Name
> Date
OnLine
> Item Code
> Whs Code
> Quantity
> UnitPrice ( Calculated using the values in the sales order)
> Tax Code
Problem i have...
1. The amount till Total LC is correct. BUT NOT THE TAX AMOUNT.
2. When i checked the Tax Base amount -> Its different form the TOTAL LC column.
3. Then i noticed that - in header i saw some discount amount , but the discount % is null.
4. I have not given any discount on BP or any special price for BP.
5. I tried to put 1% discount on header but still the discount amount is more than 1%.
Please someone help me soon.
UPDATE TO MY ABOVE QUESTION....
I found that error was causing by the option i have activated - the Round off to one in financial set up...is there any other method for the round off with out using the setup...
Edited by: vibinvarghese on May 23, 2011 1:09 PM

Some one find me an solution...this is causing me lot of problems now...

Problem with Weblog Posting

I have been having a discussion with Tiest van Gool working through a problem implementing the example in a weblog:
/people/thomas.jung3/blog/2004/09/02/creating-a-bsp-extension-for-downloading-a-table
This morning I have been unable to post comments to any weblogs (I keep getting a message that I am not logged in - even when I clearly am logged in). Since we are working through a problem, I don't want to hold up my response. I hope that no one minds that I am going to continue the conversation here (and hopefully Tiest van Gool follows the BSP forum).
Tiest wrote:
Thanks for your answers and I guess it was quite late when I finished up because, yes, I had forgotten the extension definition in my pages. Regarding the second question I mistakenly mentioned method 'DO_AT_BEGINNING', I am refering to method 'DO_HANDLE_EVENT' in stead. Besides that I have on more issue that boggles me. The page seems to work fine but when I select the "download' option, a pop-up does appear but there are no values in there. Any idea what the reason for this might be? Thanks for sharing with the lucky few, all your knowledge. Tiest.
The DO_HANDLE_EVENT is a method in my controller class. This method is fired by the framework whenever a server event fires. If you are not working with Model View Controller, then this same logic can be placed in the OnInputProcessing Event Handler of yoru BSP Page.
Now why your texts aren't showing up is a little more difficult. I used text objects in my example. Are you coding in one language, but displaying in another. If so this might just be a missing translation issue. You might try replacing the text elements with just plain hard coded text to see if that makes a difference:
* <wa_menu>-text = 'Download as HTML'(d04).
<wa_menu>-text = 'Download as HTML'.

Hi Sandeep,
It seems that you have post it on background only, because this is a large volume of data and this IDOC generally uses a BDC at the end to update database, so that might be causing the error.
Also you can try out some filters so some unwanted data will be blocked, or even a IDOC reduction technique can be used if applicable.
Best Regards,
Tapodipta Khan.

Problem with invoice posting

Similar Messages

Maybe you are looking for