Problem with ios 6 and cellular-network connection

Hi! I've youst updated my iphone 4 to ios 6 and now it cant't establish a connection to the cellular-network. Is there anybody who knows why and what to do? Thanks!

did you have nay luck with this? same happened to my wifes 4s. Apple reset it and the next day it lost cell service again.

Similar Messages

Problems with Installing iTunes and wireless network connection

Every time I attempt to install iTunes it completely kicks the internet off and an error comes up that the wireless network adapter to not connect or is not detected. My internet service is connected to a router which I receive wirelessly to my laptop. I do not understand why it is happening and to get the internet to work again I needed to do a system restore. Any ideas why this is happening. Also when iTunes was installed it came up correctly, it would just not connect to the net. I have had a previous version on my old laptop but since purchasing this new laptop I am having such difficulty. On another note, if this problem can be resolved, once iTunes is working is there a way to get the songs from my old computer onto the new? Thanks for the help in advance!

I just saw your post and I resolved this on mine for my wired connection. I'm willing to bet that the issue is the same for wireless. Here's what I found.
Issue:
During the installation, iTunes installs some network components related to mobile device support over ethernet(Apple Mobile Device Ethernet Service - netaapl.inf). At the same time, according the logs, the install process removed OEM18.inf. This almost exactly coincided with the time that I saw the network connection die (preceded it by a few seconds).
Basically, iTunes appears to be removing a required network component.
Resolution:
After installing iTunes and the network connection breaking, remove the network device from Device Manager and allow Windows to reinstall it automatically.
The following instructions are for Windows 7, but they are close enough to follow for other versions of Windows.
1. Click the Start button (Jewel in Vista and Win7).
2. Right-click Computer and click Manage in the menu that appears (type your password or click Yes if prompted).
3. On the left side of hte Computer Management window, click Device Manager.
4. Click the arrow (or plus sign) next to Network Adapters to expand that section.
5. Right-click your network adapter and click Uninstall in the menu that appears.
6. Click OK.
7. Reboot.
Windows should automatically detect and reinstall your network device on boot.

HT1222 I am trying to update my phone so I can save my info on my old phone & get a new phone, but I get a error that says "There was a problem with downloading teh software, the network connection timed out.." HELP! Not sure what my settings shoud be..

I am trying to update my phone so I can save my info on my old phone & get a new phone, but I get a error that says "There was a problem with downloading teh software, the network connection timed out.." HELP! Not sure what my settings shoud be...
I never updated anything until now...I want o update my iPhone to the newest version, but i do not want ot loose all that I have on this phone. I was told I needed to update the operating systems so i can put things into the cloud for transport to new phone, but I am just not sure how to do this..Can you help out here??

Dear Jody..jone5
Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
Goodluck
Atousa

WiFi problem with iOS 6 and network login screen

Here is a detail problem description:
Equipment: iPad 3 with iOS 6
Environment: corporate network with a login screen that requires login every 24 hours.
What happens: The very first time I tried to login into the network everything worked fine. The login screen showed up (as always did with iOS 5) as expected. But, the login screen does NOT come after 24 hours (when re-login is required), unless I will reboot the iPad (using the 2 buttons), or I will reset the network settings (which again does a reboot). Switching on-off the WiFi, or any other remedy does NOT work.
The problem is not related to the network or the particular iPad or iPhone. All iPads and iPhones with iOS 5.2 or earlier work just fine. Only the ones with iOS 6 have this issue.
I would appreciate any creative idea to resolve the issue. Thank you.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Connection problems with idea pad and public network

My Lenovo Idea Pad connects fine at home on our ATT internet connectoin, but will not connect to a local public network at a local departent store. Anyone having suggestions email me at xxxxxxxxxxxxxx Thank you!\
Richard
Moderator note; e-mail address removed to stop the spambots getting it

I just saw your post and I resolved this on mine for my wired connection. I'm willing to bet that the issue is the same for wireless. Here's what I found.
Issue:
During the installation, iTunes installs some network components related to mobile device support over ethernet(Apple Mobile Device Ethernet Service - netaapl.inf). At the same time, according the logs, the install process removed OEM18.inf. This almost exactly coincided with the time that I saw the network connection die (preceded it by a few seconds).
Basically, iTunes appears to be removing a required network component.
Resolution:
After installing iTunes and the network connection breaking, remove the network device from Device Manager and allow Windows to reinstall it automatically.
The following instructions are for Windows 7, but they are close enough to follow for other versions of Windows.
1. Click the Start button (Jewel in Vista and Win7).
2. Right-click Computer and click Manage in the menu that appears (type your password or click Yes if prompted).
3. On the left side of hte Computer Management window, click Device Manager.
4. Click the arrow (or plus sign) next to Network Adapters to expand that section.
5. Right-click your network adapter and click Uninstall in the menu that appears.
6. Click OK.
7. Reboot.
Windows should automatically detect and reinstall your network device on boot.

Wifi problem with iOS 6 and new ipad wifi/4g

This is my first ipad and have been very disappointed so far.
At first it was working normally and I was connecting to the Internet without problem. It would stay connected. I only use the device with WiFi and have cellular turned off.
After the iOS 6 upgrade I have been having problems staying connected to wifi. It works until the unit goes to sleep. Then if try to use the ipad later in the day It will only connect it i go and reset network settings .
I called apple and they said since I am over 95 days from purchase I can no longer call them for help. They said I do have hardware support, but I have no way to call and see if is software or hardware without paying for a service contract.
Can someone help me out with this. I have tried the online solutions and the only one that works is resetting the network settings. I is only temporary and not an acceptable fix for a 800 device.
I have both linksys and buffalo routers but it happens with both

118 people viewed this and not a single response.
I am still having this issue. Any suggestions????????????????

Problems with SRW224G4 switch and Bridged Network Cards

Hello,
We have recently installed a SRW224G4 switch and have discovered that when we plug our DELL PowerEdge 2900 server into the switch, the switch loses all network connectivity and all of the LED's on the switch start flashing.
The server works perfectly well plugged into another switch, but as soon as we introduce the SRW224G4 into the network, either with the server plugged into that switch or any other, the problem re-occurs.
The only way we found we could eliminate this issue was if we disabled the Bridged Network connection on the two network cards on the server. If we do that, everything is fine, except the network performance of the server has dropped significantly.
The server is plugged into the 1GB ports on the switch, although we tried it on the 100MB ports and received the same problems. The switch reports that the ports are running at full-duplex.
Has anyone noticed this behavior before, and more importantly been able to rectify it.
Thanks in advance for your assistance,
Paul

I had this problem as well with any Linksys 2024 or rackmountable switch.. The trick is, you need to use the network cards management software to "team" or bridged the 2 NIC's otherwise the switch detects a loop and the whole thing locks up. So lame... Windows built in bridge mode stinks dont use it. When you use the Intel management software or Dell or HP's NIc management software you have the option to actually choose "redundant mode" where you can pick a Nic to be the primary, or you can choose Load Balancing where you can essentially double your throughput by joining the 2 nics.
In Windows 2008 Server, you actually do this by going to the Properties on the NIC in Device Manger. the software controls are now built right into the driver. pretty neat. 2003 you can check Device Manager the same way but not sure if it's the same as 2008, you might need to run the actual NIC management app.
Hope this helps
fdigi

WRV200 - Problems with VPN Client and Internal network access

I have a WRV200 router and want to access the internal (Private Network) connected on the inside. I have successfully conected to the router with the Linksys VPN Client, but it does not appear to allow access to the internal network.
How do I enable NAT Transversal or Passthru? I have already selected all of the PPTP, L2TP and IPSEC Pass Through.
Has anyone gotten this to work?

I have actually gotten this to work. Issues surround this include the ability to get to the VPN if the main DNS is down (it does not fail over to the next DNS in the list).
If you unselect all of the boxes in the firewall General configuration, you can connect, but if you need to have all of this unchecked, what's the sense of having it?
Anyway, you can use the DoS Prevention, this is not interfering.
HTH.

Is anyone having problems with iOS 6.1.3 staying connected to wifi?

Is there a fix for my iPad to stay connected to my wifi? Have no problems with android or laptops. Please help, this is very frustrating.

Please see my post with other problems than yours, Evidently ios 6.1 has caused more problems than it solved!
Robert M. Reed Jr,
Try to have a nice Day!!! Seems we are not alone.

Problems with mail, messags, and social network accounts

Hi,
first of all, sorry for my bad English.
I would like to know if there is a maximum limit of accounts (email, social network, etc. etc.) that OS10 can handle.
On my Passport (OS10 Version 10.3.0.675) I have the following:
- 1 BBM
- 1 WhatsApp
- 1 Facebook
- 12 Mail
Now, when I try to insert another account (for example mail or Twitter), I recived the following error message:
"The maxximum accounts has been reached".
Is that right?
With the Z10 and the Q10, if I remember correctly, I did not have this problem.
I need to add more email accounts, someone can help me?
Thank you all.
I'M NOT LAZY,
I JUST DON'T GIVE NOTHING!

Let me see what I can find out and I'll get back to you when I know more! Thanks
Did someone help you? Click Like! Did a post solve your issue? Click Accept as Solution!
Follow me on Twitter or Google+ and subscribe to the Inside BlackBerry Help Blog

Problem with ios app and Story plus

i have just install story plus
i wanted to try (luckily not on a real big project) the ios app so i've done some fake tv script on story.
After that, i have start to add comment on the ios app.
I see that i add comment on the projet page off my computer story plus interface
but when i go on the authoring page, the comments are not here!!!!!!!!
Then more problematic (definitively), when i go out and come back again to story i have a problem : it's now impossible to open these documents again!!!!!
I really need to find a solution
Thanks a lot

Hi,
We are aware of the issue with commenting in iOS app and are in process of fixing it.
Can you please mail us your Story login email id and names of the documents that you are not able to open at "AdobeStory-Support<at>adobe<dot>com" so that we can fix this issue for you ?
Thanks

Problems with IOS 7 and reduce motion (parallelex)

I had problems installing IOS7 so I had to do a recover but now I do not have the "Reduce motion" feature in accessibility. When I first tried to install IOS 7 I saw the feature, but when I had to reinstall IOS 7 I no longer see the feature to ensure that it is turned off.
Should I still see it? How do I make sure it is off since I can't see it?
Thanks for your help...

Does anybody have even any thoughts on this and whether it might be a known issue of any kind? Anyone seeing this with other .wav attachments outside of Cisco UM ?

Problems with iOS 7.0.4 (internet connection)

I tried to download iOS 7.0.4 but it allways says im not anymore connected with the internet. I don't have problems to open a website. Thanks for your help!

Maybe your carrier / connection block thebports required to update on the device itself use a computer to update is a workaround

Big problem with Nokia E60 and EAP-PEAP connection

At our University we have Wlan now.
The Lan based on the standart 802.11 b/g with 54 Mbit/s
The Authentifikation based on the standart 802.1x (Peap) with the connection WPA/TKIP.
My Firmware:
V3.0633.09.04
20-11-06
RM-49
Nokia E60
My Configuration:
Connection Name: FH-Hof
Data Bearer:Wireless LAN
WLAN netw.Name: FHHof
Network status: Hidden
WLAN netw.mode: Infrastructure
WLAN security Mode: WPA/WPA2
WLAN security settings:
WPA mode: EAP
TKIP-Security: allowed
EAP plugin settings:EAP-PEAP
User Cert: not defined
CA Cert: CA-FH-Hof
username in use: User configured
username: aschmidt
real in use: user configured
realm: FH-Hof
Allow PEAPv0: yes
Yes for v1 and v2
EAP: EAP-mschapv2
Username: aschmidt
prompt password: Yes
password: entered my password
Extended Settings:
IPv4-Settings: No Changes
IPv6-Settings: No Changes
Proxserver-Address: proxy.fh-hof.de
Prxy-Port-Number: 3128
If I started to try the connection I have to enter my Username and my password. After that the handy asked me about my username and password again after a time.
Now it takes circa one minute and the connection failed.
The Error-Message ist: No Connection! WPA authentification failed.
My´account is not blocked.
Have I to enter any Ciphers?
Thanks for every help and sorry for my bad English!
EDIT: Removed non english linkMessage Edited by sailer_one on 27-Apr-200710:07 AM
Message Edited by sailer_one on 27-Apr-200710:07 AM
Message Edited by sailer_one on 27-Apr-200710:12 AM
Message Edited by ajak on 27-Apr-2007 10:21 AM

also try change "WLAN security Mode" from WPA to 802.1x
I think Nokia referrs to WPA as WPA-PSK, but when you say TKIP then it also could be 802.1x as TKIP is the encryption used.
So infact your wireless domain might be a 802.1x/EAP-PEAP/MS-CHAPv2 network.Message Edited by mbil on 30-Apr-200702:58 PM

I have a big problem with IOS 6 and audio bluetooth

My Radio Car Pioneer AVH-2400 BT dont work with bluetooth, no tag, no control, just possibility to play from iPhone. All the function is OK in IOS 5
Nothing jn IOS 6 :-(
Plus de fonction Bluetooth audio depuis le passage en IOS 6 avec mon autoradio Pioneer AVH-2400 BT, tout fonctionnait bien sur IOS 5, maintenant je peux juste lire depuis l'iPhone et plus d'affichage d'infos sur le titre ou l'album (TAG)
Je viens d'acheter cet autoradio il y a 1 mois, c'est un modèle 2012 !
Help!

I have an iPhone4 and a Pioneer AVH-P2400BT car unit. I've upgraded to IOS 6. The update (from what I've tried and what I can tell) is NOT reversible.
Here's what I've found happening between the iPhone & Pioneer for bluetooth streaming audio:
1. The track/artist info no longer displays.
2. The track skip buttons no longer function.
3. The pause/play button no longer functions. It may SEEM like it does, but it simply mutes the audio, the content continues to play (silently) on the iPhone.
4. The content no longer resumes when the vehicle is started.
5. The content will pause when the vehicle is turned off, but a couple of seconds continue (silently) on the iPhone.
6. If content is paused by the vehicle being turned off, it will resume playing on the iPhone speakers following an incoming phone call, whether answered or not. (This can be a little embarrassing, depending on the content of your prefferred podcasts! )

Problem with ios 6 and cellular-network connection

Similar Messages

Maybe you are looking for