Problem with iOS 8 camera

Since I have updated my iPhone 5s to IOS 8 the following occurs. If I use the timer with the camera it bursts 10 photo's. If I don't use the timer only one photo is made. This only happens on my iPhone not on my iPad Air....
What can I do to prevent this?

Burst mode seems to be the only option when using the timer. Why it's that way I don't know nor could I find much information about it on the net. It would be nice if there was an option to turn burst off. Perhaps later updates will add that feature if enough request it. You can leave feedback at: http://www.apple.com/feedback/

Similar Messages

  • My iPod touch 5G has a problem with its back camera, there's a dark spot on picture quality and won't focus, it will only focus on things 5-7 inches away from the iPod. Could I go to apple and see if they can repair it or give me a new one?

    My iPod touch 5G has a problem with its back camera, there's a dark spot on picture quality and won't focus, it will only focus on things 5-7 inches away from the iPod. Could I go to apple and see if they can repair it or give me a new one? Someone help please.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          
    If the iPod is defective and not abused Apple will exchange your iPod for a refurbished one at no cost

  • Problems with iOS 5 in Kuwait

    Problems with iOS 5 in Kuwait. ID calling issue with names not being recognised. I just downgraded to 4.3.5. Waiting for a fix from apple

    After installing ios 5 here is my Concerns (Kuwait):
    1- The major problem is that caller id problem doesnt recognize the +965 prefix as you all stated , i found that on all carriers in kuwait ... the only temp solution is to duplicate all the contact numbers one time with (+965) to determine the Messages , other time without +965 to determine local calls -- NOTE--- using prefix 00965 will not solve the problem because both messages and calls will not recognizing it
    2- Some issues appeared in iCloud specialy in contacts section that if you disable icloud and keep your contacts on the iphone and then re-enable icloud and choose merge will cause all the contacts to be duplicated which is very annoying
    3- Kuwait is not found when trying to associate my apple id to a region to apply for any of the new apple services like i messages , home sharing for music and videos  or any location based service
    4- strange numbering format appears in my contacts in some other countries , this cannot be controlled , dashes '-' between numbers dont know why
    5- noticed some slow performance and partial hangs in answering calls or closing line .. this happened 2 times and stayed not longer than 3 seconds each .
    anyway ios 5 looks promising but need to fix those slight issues ASAP

  • I have a problem with my 4s camera which has come up recently. Everytime I take a picture and look it up via the 'Photos' app, it shows as blank. But when I click on edit on the blank picture, it comes up and I am able to save it back on my photo album.

    I have a problem with my 4s camera which has come up recently. Everytime I take a picture and look it up via the 'Photos' app, it shows as blank. But when I click on edit on the blank picture, it comes up and I am able to save it back on my photo album as a proper image. Besides, I have also experiences the camera working a bit wiered (slow and often blanks out the moment I am ready to take a photo). Any help on this pls?

    Hi Noob Søren
    There are a few things that are confusing in your question.
    As far as I know, you dont have to install Time Machine on this OS as it is already installed for you. You only need to connect a hard drive to your computer via firewire or usb, click on the Time Machine icon, Open Time Machine Preference in the drop down menu and select a disk: your connected hard drive.
    You can of course reformat this connected device, partition it into a few volumes to organise data if you so wish.
    I find it strange that your mac's hard drive is divided into two volumes... perhaps this was created through bootcamp?
    You can access the configuration of your hd through Applications/Utilities/Disk Utilities.
    Clicking on one of the icons on the right hand panel will bring the details of the contents of your hardDrive and volumes. From there you can decide to erase a partition, reformat etc....
    If your hd contains more than one volume, and one of them is empty, you could decide to remove it. Back up all your important data before doing so.
    Hope this helps
    WN

  • Hey Apple when are you going to fix the problems with IOS 8.3??

    Hey Apple when are you going to fix the problems with IOS 8.3??
    Message is working weird.
    I don't have internet service when I'm away from my WiFi, because my phone won't use LTE now.
    Should I wait for a IOS 8.3.1 update or reset my phone to factory and start over?
    If there's a fix coming when will we see it?
    (I'm using iPhone6 plus)
    I've tried everything else to fix the problems I'm having. Soft restart. Hard restart. Used your chat line. Called Verizon. Reset network settings.... Help!!!!!
    I've posted on the Apple Communities about all this and I've sent in a couple of bug reports.
    I live up in the mountains and MUST be able to access my Verizon LTE for information if there is a fire! I'm in California!

    I have a Verizon iPhone 6 and am having none of those problems.
    SueMac wrote:
    Should I wait for a IOS 8.3.1 update or reset my phone to factory and start over?
    Didn't they already have you do that? If you haven't, yes, you should restore your phone as new and test.
    I live up in the mountains and MUST be able to access my Verizon LTE for information if there is a fire! I'm in California!
    If you are in a situation where you may need emergency information, organizations such as the Red Cross recommend things like this:
    http://www.amazon.com/Epica-Emergency-Digital-Flashlight-Certified/dp/B00CZDT30S /ref=sr_1_1?ie=UTF8&qid=1429463666&sr=8-…

  • It's now over 6 weeks since I made the mistake of updating my iPad and I am furious and frustrated at the lack of a solution to the problem with ios 5 audio app missing lyrics

    It’s now over 6 weeks since I made the mistake of updating my iPad and I am furious and frustrated at the lack of a solution to the problem with ios 5.
    I recently updated to ios 5.1 but nothing has been done to rectify the audio app problems ie lyrics no longer shown,
    I am extremely disappointed and angrywith those responsible for the iOS 5 update, in regard to the way it hasaffected the music app in my iPad.
    I also own an iPhone 4, am an avid Apple fan, and up until now have beenextremely pleased with the devices, and have sung their praises to friends andassociates.
    I am a professional musician, and purchased an iPad primarily to use with theperformance of my music.
    The changes made to the music app affected my performances over the weekendextremely adversely – limiting my repertoire and causing confusion and delays.
    I have spent many hours talking withApple helpline assistants (who, incidentally have been very good and have triedto help), and I have also spent a lot of time on this letter.
    I greatly regret updating to iOS 5.
    There are two major problems with the music app.
    1. Lyrics no longer displayed
    2. Layout, and appearance and consequently performance have seriouslyregressed.
    I have a repertoire of around 500 song backing tracks, organised into about 20playlists, half of which featured lyrics / chords that I have spent monthsrecently entering into iTunes so that they could be used on my iPad.
    These were working fine up until the update - now they are gone.
    Previously, the app featured large icons for playlist, artists, songs etc. atbottom of page: Now there are small, grey, indistinct barely legible buttons.
    Previously, when playlist icon was selected - all the playlists were listedclearly in order on the left hand side in black on white (as in iTunes).
    Now they are scattered across the whole page in large squares (displayingnothing if there is no album art).
    The identifying wording below eachsquare is now small, grey, indistinct & barely legible.
    Previously, when a playlist was selected - the songs were displayed in adescending list in black & white: now they appear as small, grey indistinct & barely legible.
    Previously, when a song was selected - it appeared filling the page, and withaudio controls clearly positioned at top of screen. One tap would bring uplyrics.
    Now audio controls appear at top once again small, grey, indistinct &barely legible.
    A small square representsalbum art which if tapped fills page. A further tap fails to bring up lyrics.
    Don Wilson

    Lyrics aren't supported in the Music app on iOS 5 on the iPad. These are user-to-user forums, they are not monitored by Apple (there are too many forums/threads/messages for that to happen). If you want to leave feedback for Apple then you can do so here : http://www.apple.com/feedback/ipad.html

  • How do I fix the compatibility issue between my iPhone 4S with iOS 7 and my Pioneer car stereo? There was no problem with iOS 6, but now I get a message saying "this device is not compatible" and so I can't use Netflix for example. How do I fix it?

    How do I fix the compatibility issue between my iPhone 4S with iOS 7 and my Pioneer car stereo? There was no problem with iOS 6, but now I get a message saying "this device is not compatible" and so I can't use Netflix for example. How do I fix it?

    This is a typical response from the manufacturer. Did you try the fix that Lawrence mentioned. When Apple or any other phone manufacturer update phone software, they have the latest Bluetooth installed. It is usually the problem with the radio manufacturer that they devices are using the older Bluetooth protocols. You can try this support document http://support.apple.com/kb/TS3581 and see if anything there helps, but generally it requires the radio manufacturer to update their firmware.

  • SKY go app but doens't work. There is a problem with iOs 6. What I can do

    I have an iPad I tried to use SKY go app but doens't work. There is a problem with iOs 6. What I can do

    The App says that there is not internet connection, even if I'm connected.

  • HT4623 How can i solve installation problem with iOS 6.

    How can i solve installation problem with iOS 6. I've tried to install it on my iPhone 4 but nothing turned out. Thanks in advance!!!!

    can you connect your device to Tiunes and check to see if there are any files in
    OSX: ~/Library/Logs/Crashreporter/Mobiledevice/<Devicename>/
    Windows: %appdata%\Apple Computer\Logs\Crashreporter\MobileDevice\<Devicename>
    specifically named OTA......
      Also for the failed itunes restore please attach the contents of the latest log in
    OSX:   ~/Library/Logs/<iphone or ipod or ipad> updater logs
    Windows: C:/User/ Appdata/Roaming/iTunes/<iphone or ipod or ipad> updater logs

  • I have got problem with my pc-cam 950 slim

    I have got problem with my pc-cam 950 slim. When I press the power button, the busy light goes on for seconds then it is shut down again so the camera doesn't work. Please help me with this problem. I tried to connect it to my PC put it didn't work either.
    Thank you for taking the time to help me.

    Originally Posted by Colin-CL
    Hi,
    Have you checked that you have put in brand new 2 x AAA batteries?
    Connecting it to your PC will allow you to use it as a mass storage device after installing the relevant operating system (Microsoft
    hi,
    Yes, I put two new batteries
    When connected to the computer nothing happens
    What can be done to reset it?
    By replaced capacitor problem can be solved?

  • Problem with the back camera in iPhone 4 (Black Shadow)

    Hi, I have a problem with the back camera. When turned on I can see a black shadow on one side and when I take the photo, appears in all the photos.
    I searched on the Internet to resolve this problem but I haven't been successful. A friend told me that maybe it is dirt that was introduced into the cover but I don't think It's true.
    The iPhone haven't dropped me for some quite time and don't crashing.
    Look here is a photo to show you how the black shadow looks like:
    Please, anyone know what the problem can be?

    It certainly does work.
    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • Problems with the front camera on iPhone 4

    Hey, guys. Just faced a problem with the front camera on my iPhone 4. So, when it's enabled this thing is on screen and all the pictures taken on it also has it:
    http://bit.ly/epZypp
    I've never dropped the phone, it isn't jailbroken or unlocked, it was bought in Britain but using in Russia, the firmware is 4.2.1.
    So, guys, can you help me?

    Have you tried resetting your phone by holding down the sleep/wake button and the home button at the same time until the phone restarts?

  • I have sounds problems with iOS 7

    I have sounds problems with iOS 7. I can not hear my music, all the apps have no sounds. Only when I ask Siri has sound but it's too loud and awful. I found 2 errors with I ask to Siri what things she can do in Spanish the is an error and one word or If I ask who am I? She said that I have to go to settings and indicate her who I am but I already have that configured. And I try to configure again just in case, I do the same question and she still doesn't who I am.

    Try a Restart. 
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
     Resetting your settings
    You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
    Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple. 
    Here is a link to their contacts with most of the information below. 
    http://www.apple.com/contact/

  • I have just purchased elements 12. It will not convert a raw file for me. i have downloaded DNG convertor 8.5 but it says that my Canon 70d is not compatible. I never had a problem with my last camera canon 7d and elments 8. Can someone help me please..

    i have just purchased elements 12. It will not convert a raw file for me. i have downloaded DNG convertor 8.5 but it says that my Canon 70d is not compatible. I never had a problem with my last camera canon 7d and elments 8. Can someone help me please

    Did you buy PSE in the mac app store? If not, just go to Help>Updates in the editor and update camera raw and you should be able to open the raw files in PSE 12 directly without the DNG converter.

  • Having problem with my iphone camera,doesnt work when i click the camera app,but it does work when i double click when my phone is off.

    having problem with my iphone camera,doesnt work when i click the camera app,but when i double click when my phone is locked it works.

    The Basic Troubleshooting Steps are:
    Restart..  Reset..  Restore...
    Reset your phone:
    Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release the buttons...
    Restart / Reset
    http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

Maybe you are looking for

  • Poblem with FTP

    Hello, Can anyone help me with an ftp problem? I have a brand new T61 and I can not get any ftp program to work. I am currently using FileZilla which works just fine on another computer with the same os (Vista). I am using exactly the same settings o

  • Use of Adobe Intractive forms in SAP

    Hi All, I wanna make use of Adobe intractive forms in one application. when i use transaction SFP and click on the layout tab i get following error message. Could not start Layout Designer (see long text) Message no. FPUIFB086 Diagnosis The forms des

  • Close icon display for a Tab(ShowdetailItem)

    Hi, I am using the PanelTab with multiple ShowDetailItems. I am giving the close icon provision for the showdetail item. But the close icon is coming only in mouse over. I need to display the close always(ShowDetailItem). Reg, Brahma B

  • Photosmart 6525 scan failure

    Printer will print documents, letters, etc from computer.    If I attempt to scan and copy a document, printer will not scan and then proceed to copy document.     Have tried 'scan doctor', but an error message that it could not access the scan drive

  • Find Case 1 and Case 2

    Hi, An order will have both Case 1 and case 2 types. Case 1 :One ordered_item_id has multiple package _id which we call Ship Alone Case 2: One package_id has multiple ordered_item_id which we call Normal Requirement: I will give packing_id or ordered