Problem with IOS8 update and my 2013 Honda Accord

Updated my iPod touch with IOS8 and now it acts weird while connected to the stereo of my 2013 Honda Accord with a USB cable. When I start the car and set the stereo to iPod, it will grab a random song from the iTunes Library and start playing it. I can manually change the music on the iPod but the stereo display still shows the random song title and none of the stereo controls (including those on the steering wheel) will control the iPod. The random song title will stay on the stereo for a random length of time. I will be changing the music selection from the iPod and all of a sudden the stereo display will show the correct song and the radio controls will work. Something is missing here regarding the communication between the car stereo and the iPod. Anyone hear of a Honda software update to work out the bugs?

Contact Honda. Sometimes an IOS update breaks compatibility
Also sometimes this helps:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

Similar Messages

Had a problem with newest update and the advice from turingtest2 resolved my problem just to say thanks! Had never used this route before so was less painful than thought it would be again thanks.

Had a problem with newest update and the advice from turingtest2 resolved my problem just to say thanks! Had never used this route before so was less painful than thought it would be again thanks.

how can i find out what the fix is that works..please

I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid co

I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.

Hi David-
The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html

Problems with windows update and fingerprint

HI
My windows was out of date and in the coarse of trying to update it, the system runned into a problem and the only way i could get back my information was to let the system settings go back to its default settings. Following that, i find it difficult to download new updates and the fingerprint is also not working any more. Please what should i do ?

Hi @CLEPRIS ,
Thank you for visiting the HP Support Forums and Welcome.It is a great site for information and questions. I have looked into your issue about your HP-ENVY m6 Notebook and issues with Windows Updates and the Fingerprint reader software. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers that might need updating on your system.
It shows me that there seems to be interference with Software task, usually your virus protection.
You might have to disable this software and then run the Windows update.
I would suggest to uninstall HP SimplePass and reinstalled the latest version for Windows 8.1.
I would be happy to assist if needed. How Do I Find My Model Number or Product Number?
I hope this fixes things up for you.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Problem with Mavericks Mail and Exchange 2013

Hello,
I have just updated to Mavericks a few days ago. Now I have a strange problem.
The setup with Exchange 2013 works fine ... so I can send&receive mails.
The problem: I only get new mails. All (few thausand) mails stored on the Exchange account are not synced to mail?!
Maybe anyone has an idea how to solve this ...
Thanks,
Marc

Some problems with Exchange mail have been solved by disabling Autodiscovery. If that doesn't work, see below.
Back up all data. Delete the Exchange account from the Internet Accounts preference pane and add it back. If there's still no improvement, continue.
Quit Mail. Force quit if necessary.
Back up all data. That means you know you can restore the Mail database, no matter what happens.
Triple-click anywhere in the line below on this page to select it:
~/Library/Mail/V2/MailData
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder
from the menu bar. Paste into the box that opens (command-V), then press return.
A folder window will open. Inside it there should be files with names as follows:
Envelope Index
ExternalUpdates.storedata
Move those files to the Desktop, leaving the window open. Other files in the folder may have longer names that begin as above. Move those files, if any, to the Trash.
Log out and log back in. Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is damaged and that Mail has to quit. Click OK.
Test. If Mail now works as expected, you can delete the files you moved to the Desktop. Otherwise, post your results.

Problem with email update and Map as well in ios6 though i am using iphone5.., problem with email update and Map as well in ios6 though i am using iphone5..

Hello.
I am having problem with my email update. i am not getting my email update in time on my iphone4 since i installed ios6. that was fine with ios5.
I brought iphone5 but still the same problem. its not shown automatically in my iphone screen whenever i get my email.
Same having big problem with imap.....
Riaz

The problem? It's actually pretty simple: Microsoft implemented their mail processing in a way that has greatly assisted folks using Microsoft products and Microsoft platforms, and established an "export" mechanism when communicating via mail in heterogeneous computing environments. Microsoft tools including Microsoft Exchange Server and their systems running Microsoft Windows are a good and very capable mail environment system, with great scale and very well integrated mail, calendar and related processing, and some exceedingly useful tools including SharePoint that have no real analog with OS X, Unix or Linux systems. But these tools don't necessarily interoperate entirely nicely in heterogeneous environments; with non-Microsoft tools and platforms.
The winmail.dat mechanism is a part of the whole Microsoft infrastructure, and particularly when the information is being "exported" out from the Microsoft environment, and into a non-Windows and non-Exchange environment. The determinate here involves the settings chosen by the various senders. (Possibly also by the defaults chosen by the administrator of the Exchange Server(s) involved, but I haven't checked that.)
Here's the Microsoft knowledge base article that describes the specificss of the winmail.dat file.
There are tools around to read the TNEF-format winmail.dat files on OS X and other platforms, including TNEF's enough for OS X, and likely various other tools. Or get your senders to reconfigure their settings for you when they're sending messages to you, as described in the Microsoft KB article.

Problem with software update and restore section in iTunes

Recently i have had this problem with iTunes. I cannot check for updates or restore. These sections have been greyed out. I have tried everything. Rebooted my device, reinstalled iTunes, downgrade iTunes, i have tried it on other computers. Nothing seems to work. Please help me out here.

For this me workied perfect, hope you get yours updated properly too! I just noticed this: http://discussions.europe.nokia.com/discussions/board/message?board.id=swupdate&message.id=451 Maybe it's good idea to post your product code here and retry in few days?

Problem with Software update and n70 Branded Tim

Excuse me just before for my no fluenty english.
I'd tried to flash my phone N70 Fw. v2.x branded 3 Italy to new version 5.x branded 3 Italy and all have finish ok, but
when i'd tried to flash my N70 fw. v3.x branded TIM to new fw 5.x the flash was ok but the Themes, the screen saver, and the multimedia button wasn't correctly installed.
When i went to change themes i can see one theme called TIMN70_2nd.skn but the option for it is delete it or exit.
If i try to delete it not work..
I want my old screen saver, desktop and theme of TIM branded
Can anyone help me?
It's a problem of firmware or Software Update?

For this me workied perfect, hope you get yours updated properly too! I just noticed this: http://discussions.europe.nokia.com/discussions/board/message?board.id=swupdate&message.id=451 Maybe it's good idea to post your product code here and retry in few days?

Problems with Yosemite update and hardrive space! How can I install and use macbook again?

I went to upload Yosemite but didnt have enough space on my hardrive. Now when I turn on my computer it tries to install - gets to about 15 minutes and then stops and says theres a problem extracting files from essential.
There isnt enough room on my hardrive to install Yosemite. I now cannot use my macbook. I cannot access any of my files, documents, apps, itunes ect. I dont know how to free up space on the hardrive when I cannot access anything.
tried to boot in safe mode but it will not let me. Stuck and unable to use computer. HELP!

Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.

Problems with Security Update and Leopard Re-Installation

I downloaded the new software update onto my Powerbook. When I restarted my computer, it got stuck at the loading screen. I did an Archive and Install and reverted back to Panther. Now I am trying to re-install Leopard, but the download will not start (it just says "calculating" but nothing happens). I think the security update messed up my system and I want to know what I should do.

Alex Kramer wrote:
I downloaded the new software update onto my Powerbook. When I restarted my computer, it got stuck at the loading screen. I did an Archive and Install and reverted back to Panther.
I presume you were not using TimeMachine.
Now I am trying to re-install Leopard, but the download will not start (it just says "calculating" but nothing happens). I think the security update messed up my system and I want to know what I should do.
What "download" are you referring to? A Leopard update? Which one.

Problem with bulk update and inheritance

Employee and Customer are subclasses of Person (strategy "SINGLE_TABLE"). Both are entities.
I launch a bulk update to modify the salary of all the employees:
em.getTransaction().begin();
Query q = em.createQuery("update Employee e set e.salary = 2000");
int n = q.executeUpdate();
em.getTransaction().commit();
In the table PERSON, the column "salary" of all the lines, even the lines of the customers !, is modified to 2000.
Can you tell me whether it is a bug of TopLink or I have made an error?
I have used glassfish-persistence-installer-v2-b23.jar to install toplink-essentials.

I filed a new TopLink bug https://glassfish.dev.java.net/issues/show_bug.cgi?id=1448

Problem with ios8 update

I please need help. After updating I have three albums that have grouped together. How do I fix this?

Hi,
Go to iTunes library on your computer. Read this http://samsoft.org.uk/iTunes/grouping.asp
Jim

HT4623 Problems with apps updates

Problems with apps updates

OK
Do you have a question?
If so, then explain your issue in much more detail than "Problems with apps updates" and ask it

Problems with Mail, Safari and iTunes after updating to 10.5.6

Hi all,
after installing 10.5.6 I have problems with Mail, Safari and iTunes.
The time to open mails, websides and iTunes store is increasing dramatically since the update. If I open a webside parallel with Safari and Firefox, Safari needs minimum 15 times longer to open the complete side. Mails containing HTML-code also needs a long time to be opened. Tha same Problem with iTunes store. Connecting to the Store costs at least 30 - 40 seconds. And unfortunately for every iTunes store side I open. Its terrible
Any idea or workaroung to solve that problem?
Regards
Michael

First, run Disk Utility and repair permissions and then restart.
I installed the 10.5.6 Combo update. Sometimes things get "lost in the translation" when you use Software Update depending on your installation. Perhaps you can download 10.5.6 Combo from the website and install it from your desktop.

Anyone NOT having problems with ITunes 8 and latest firmware update???

I have really been put off updating to ITunes 8. The firmware update appears to be doing well. Is there anyone that uses a MacBook like myself who have had absolutely NO problems with new Itunes and firmware update? Answers on the back of a £50 note....

Not having issues now that I have updated all i(hardware) firmware to version 2.1, two phones and an iPod Touch, all work fine (So Far) (knocking on wood). As far as iTunes goes I have mixed feelings. It's a bit faster and more stable, however they removed the "Burn CD" ability from the software. That blows a bit as I would make CD's from some of my play lists to play in the car. Yes I can dock my devices in the car, but as a matter of convenience it's easier to fire up the CD when your in a rush.

Problem with IOS8 update and my 2013 Honda Accord

Similar Messages

Maybe you are looking for