Problem with iPhone usage stats

My usage and standby times read the same. Whenever I use the phone for let's say 10 minutes the standby will go up by 10 minutes but its not the case the other way around so like usage doesn't go up when phone is I'm standby. Is this serious and is there a fix

Jay Davies - I am also running an iphone unlocked on vodafone but in Ireland. I have tried rebooting after doing the steps above and it keeps my usage stats intact now. Before it wiped out the stats if I rebooted - even if I hadn't installed anything. It also wiped out the stats if I didn't reboot at all between charges.
Those steps above fixed my phone for battery charge life and the usage stats so hope it might for other iphones also.

Similar Messages

  • Does anyone have problems with data usage with att and Iphone5?

    Hello, Does anyone have problems with data usage or non usage I should say with Iphone 5 and AT&T?

    After 4+ months of dealing with this data usage and battery drain problem that included 3 data captures of my wife's iMac, the trigger for us regarding the problems syncing with iCloud, and 5 hours of logs off my iPhone 6 to be analyzed by Apple engineers that included times my wife's computer was both on and off to demonstrate the difference in data usage and battery drain under those conditions, I can say with very reasonable certainty that the iOS 8.3 and corresponding Mac OS 10.10.3 update has solved the problem. 
    We have now been running for about 2 weeks and data usage with the iCloud Servers attempting to sync has dropped from a rate of 31 GBs to under 15 MBs per month.  Yes, you read it right.  We were burning 2000 times as much data doing absolutely nothing important on both of our phones, a 5s and a 6.  Just imagine what that does to battery life!  The 5s would last about 5 hours and the 6 was dead in less than 14.
    The distasteful aspect of this process was how the engineers were quietly fixing the problem at the same time sending messages to my contact person within Apple that were dismissive in nature in the face of indisputable unreasonable results. I must say, this experience with the multiple times the engineers' responses were inappropriate put a little tarnish on the old Apple shine of the ‘It just works’ mantra. This was my first experience in 34 years that caused me to stop recommending Apple products without reservations and with a disclaimer.
    Since the update solved the problem, then I can only conclude that there was a logic bug regarding the reaction within the process to the incoming data that was corrected.  There was noting short of logging out of iCloud that circumvented the problem for us, Gator5000e and probably many others noted on other threads.  I am not trying to imply that this is the cause of everyones battery use problem, but it is reasonable that it was a cause for many.

  • Reception / Battery problems with iPhone 3GS after upgrading to iOS 4.2.1

    There are major reception and battery problems with iPhone 3GS after upgrading to iOS 4.2.1.
    I can not believe that Apple did not test this for major bugs like this one is.
    I am a business user and can not effort to have bad reception. Apple wants to gain in the business clients... I never had this with my former BlackBerrys!
    I need a reliable phone not a play thing like this is right now, it just needs it to work propely. And if a major bug like this comes along, fix it immediately. After the iPhone4 story, now this...incredible! Going back to my reliable BlackBerry! It just ain't reliable and takes forever to fix a problem.

    I have the same issue after iOS 4.2.1 update. I am using iPhone 3GS officially unlocked by Apple. I tried using different SIM cards and both carriers show same problem when using phone in 3G mode. Phone falls back to EDGE mode showing 'E' from '3G' at start. I have reset the phone and rebooted several times and moved to different cell areas in the city just to verify the problem.
    I had no such issues earlier. I also have Nokia E71 which shows full signal and has no such issues.
    I have posted the bug on apple iphone feedback page. I hope they Apple will fix the problem and test the release properly on all models before releasing to public.

  • I refurbished my macbook air 7 months ago because there was a problem with the steady state drive. Now my battery seems to be dead again. How long does the warranty last? Do I need to pay for a new battery?

    I refurbished my macbook air 7 months ago because there was a problem with the steady state drive. Now my battery seems to be dead again. How long does the warranty last? Do I need to pay for a new battery?

    As I wrote Apple will diagnose an Apple product even if it is out of warranty for free. That should be your first step to find out if the problem is the battery or something else.
    Once you have Apple telling you a 7 month old battery is defective (if that turns out to be the case)  then it becomes a game of horse trading. You'll need to speak to the tech and when he tells you there is nothing he can do you will need to speak to the tech manager and when she says most likely there is nothing they can do you go to the store manager, etc.  It is unlikely (though possible) that they will give in easily you need to be firm, polite and let on that you're willing to accept a partial reimbursement.
    So again the first step is to find out what is wrong.
    good luck

  • Anyone having problem with iphone getting not delivered message after sending picture and it really is getting delivered to recipient.

    Anyone having problem with iphone getting a not delivered message after sending pic and it really is getting delivered to recipient.

    Same problem here with and I've done everything shy of a total reset which I also find unacceptable. This problem exists on all iMessage platforms (iPhone, iPad, and Mac) so I don't see how restoring my iPhone would help the problem.

  • I have a problem with iphone 4s...is ringing but another sounds not working....please help me!!!

    i have a problem with iphone 4s...is ringing but another sounds not working....please help me!!!

    Hi pystyke,
    Welcome to Apple Support Communities.
    You may find these links helpful with troubleshooting the audio issue you're experiencing:
    iPhone Assistant
    http://www.apple.com/support/iphone/troubleshooting/
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Best,
    Jeremy

  • Having a little problem with iPhone 3G.

    Hi!
    I have problem with Iphone 3G 16 GB. I was trying to reset all the settings in the iphone but something went to wrong side and now probably operating system is damaged and only icon for connection to the iTunes is showing up. ITunes is not recognizing the phone. Please can you help me!
    Thanks in advance.

    Hey gonche,
    The iPhone is in Recovery Mode, generally the iPhone will have to be restored to get it out of recovery mode.
    This article: http://docs.info.apple.com/article.html?artnum=305744 will walk you through restoring the iPhone.
    -Jason

  • Have any of you had a bending problem with iPhone 6 plus?

    has anyone had a bending problem with iPhone 6 Plus?

    http://www.washingtonpost.com/blogs/the-switch/wp/2014/09/25/no-you-probably-can t-bend-the-iphone-6-plus-unless-youre-a-bodybuilder/?hpid=z17

  • I have a problem with Iphone 5 pocketdialing constantly

    I have a problem with iphone 5 pocketdialing constantly

    Tap the Sleep/Wake button BEFORE you put your phone in your pocket.

  • Hello, I have a problem with iPhone 5c softhware update ( The iPhone "iPhone" could not be restored. An unknown error occurred (27))

    Hello, I have a problem with iPhone 5c softhware update ( The iPhone "iPhone" could not be restored. An unknown error occurred (27))

    Error 1 or -1
    This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
    The" may need service' meand there is a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • Sir i have a problem with iphone its factory locked how to unlock

    sir i have a problem with iphone its factory locked how to unlock

    You have asked this question 3 times. Each time the answer being the same. ONLY, the original cellular provider can unlock the phone. However, if the phone has been previously hacked to provide unlocking, the fact that you have updated it has now re locked it. It is possible that it might never be ale to be properly unlocked.
    https://discussions.apple.com/message/22282979#22282979

  • Problems with "Select Distinct" Statement

    Hi... I've a little problem with my SQL Statement...
    I've a Table in a DataBase with Solds of the Month... the fields are: vta_fecha, vta_prod, vta_total, vta_mesa.
    I've to Select only the distincts fields of vta_prod... selected by vta_fecha and vta_mesa...
    My code is like this:         try{
                Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
                conec = DriverManager.getConnection("jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=C:/POOL/Data/BaseDat.MDB");
                state = conec.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE,ResultSet.CONCUR_READ_ONLY);try{
                rec = state.executeQuery("Select DISTINCT vta_prod, vta_fecha, vta_mesa from Ventas where vta_fecha = #" + Fecha_q + "# And vta_mesa = 0");           
                rec.first();
                int x = 0;
                while (rec.isAfterLast()==false){
                    x++;
                    rec.next();
                rec.first();
                if (x > 0){
                    Productos = new String[x];
                    Total_Vta = new int[x];
                    Cant_Prod = new int[x];
                    x = 0;
                    while (rec.isAfterLast() == false){
                        Productos[x] = rec.getString("vta_prod");
                        rec.next();
                        x++;
                else{
                    Productos = new String[0];
                    Total_Vta = new int[0];
                    Cant_Prod = new int[0];
            }catch(Exception e){JOptionPane.showMessageDialog(null,e.getMessage());}Now, in the Table I have only 3 diferents vta_prod, but this Statement returns 9 Rows... and I don't know why...
    Please help me...
    Regards...

    I don�t have a complete picture because I don�t know what values you are passing in the select and I don�t know your column types but this is what I think is happening from what you have shared.
    You may have misunderstood what the DISTINCT keyword does.
    The DISTINCT keyword applies to the full set of columns in the select (not just the first column). So in your case it would be equivalent to:
    SELECT vta_prod, vta_fecha, vta_mesa
    FROM Ventas
    WHERE ...
    GROUP BY by vta_prod, vta_fecha, vta_mesa
    So, it doesn't matter that you only have 3 distinct vta_prod values if you have multiple values being returned in the other columns. The vta_mesa column can only a return a single value as �0�. That leaves the vta_fecha column which is probably a date/time column and is probably the column that is returning the three other distinct values (one date with three distinct times).
    (3 vta_prod) x (3 vta_fecha) x (1 vta_mesa) or 3x3x1 = 9 rows
    So find a way to strip the time from vta_fecha in your select statement and your SQL should return the results you expect. I�m not an Access expect but I think I remember you can use something like the �Convert� or �DatePart� functions to make that happen (check your documentation to be sure)..
    A couple of asides;
    1) You should use a PreparedStatement and rarely if ever use Statement.
    2) You should start Java variable names with lower case.

  • I have a problem with iPhone is that I can replace it at points of sale in the U.S. because I bought from Saudi Arabia because the problem I think in the hard ware software worked more than 3 times did not fix

    dears,
    I have a problem with iPhone is that I can replace it at points of sale in the U.S. because I bought from Saudi Arabia because the problem I think in the hard ware I do resoftware more than 3 times did not fix.
    Network also always missing.
    I am living in KS Wichita. I hope you help me pleas.
    Regards.

    iPhone warranty is not international. You will have to return your
    iPhone to Saudi Arabia for repair/replacement. Either take it back
    yourself or send to friend/relative for them to take to Apple. Apple
    will not accept international shipments for repair nor will Apple
    ship repaired/replaced iPhones out of the country where the repair
    was done.

  • Someone have problems with iphone 5 flash dark photos

    Someone have problems with iphone 5 flash dark photos

    http://support.apple.com/kb/HT2101?viewlocale=en_US
    It is normal for it to get warm when it's being used, especially if it is hot outside. It can even get uncomfortably warm. As long as it is not causing you physical harm (as in giving you burns) or displaying a temperature warning, then it's normal behavior. It's like taking your laptop outside and using it. Except the laptop will probably burn you.

  • Is there a fix for the connectivity problems with iPhone 5S and ISO 7.0.2?

    Is there a fix for the bluetooth connectivity problems with iPhone 5S and ISO 7.0.4?
    I am having problems connecting the BT Audio and the handsfree phone connectyion is unreliable in 2012 Mitsubishi Lancer XL.
    All worked OK with ISO 6.

    Hello CraigNicholson
    You would need to sync with iTunes to get that process to work for you. Check out the article below for more information on how to resolve that issue to get the proper token to use Push Notifications again.
    iPad and iPod touch: Unable to use YouTube or Push notifications
    http://support.apple.com/kb/ts3305
    Regards,
    -Norm G.

Maybe you are looking for

  • Problem with checkbox and run the get button event continuously

    Hi all, I have a checkbox list of 3 sensors. I have used the X-Control (for checkbox) found in the following link for my application https://decibel.ni.com/content/docs/DOC-30558. I have problems to achieve the following. Suppose i check Vibration an

  • Adobe Bridge / Aperture organization feature only comparison

    I am curious what others' thoughts are about comparing Adobe Bridge / Version Cue to Aperture's pre-editing organizational features (meaning the ability to organize prior to doing any RAW conversion and editing). What do people see as the most import

  • Error message in Powerpoint when using Presenter 8

    Can you help? I have Windows 7 SP1, Office 2010 and have repeatedly tried to install Presenter 8 without getting the error shown below. As soon as I try to use a Presenter tool within Powerpoint I get this message. Each time I have uninstalled Presen

  • Which file to convert in a video (movie) CD?

    in a movie CD, there are 4 folders 1. EXT - LOT_X.VCD, PSD_X.VCD 2. MPEGAV - AVSEQ01. DAT 3. SEGMENT - ENTRIES.VCD, INFO.VCD, LOT.VCD and PSD.VCD 4. VCD and there is separate 'Auto run'file. I have videora ipod converter. My query is "Which file shou

  • How to run oli7bw in background??

    Hi all I would like to run the oli7bw transaction in background . how to do it? thanks in advance, Jayashree