Problem with Iphone4s connection with Jabra HFS001

I have them paired and it was working great. Now the jabba will connect but when a call comes in (no announcement) I answer the call and talk on the iphone and when the call is done the Jabba says call ended. Jabba sent me a new one and the same thing is happening so it must be something I pushed on the Iphone anybody know what I might do? thanks

Hi, welcome to apple, "the old radio mast" as you said is saying you are connected to a wifi network.
the reason why the 3g goes away is this other symbol is displayed is cos your phone is telling you about the best connection it has and as wifi and home Internet is faster mostly then 3g it shows this as your phone just goes to the wifi network for any data it needs and not to the cells (your network provider)
to see if your phone is on a network or connect to one go to Settings> WI-Fi and click on the wifi network is yours and if you are then asked to put in a password then you are not connected to the wifi network if you get lots of info like ip etc then click on forget this wifi network after this repeat Settings> WI-Fi and click again on your network then you should be asked to put your password in, do so and then your phone will connect to your network.

Similar Messages

E61i Connectivity Problems with Jabra BT125 Blueto...

Hi,
I just got a New E61i mobile. I have already upgraded the same to the latest firmware - 2.0633.65.01.
I had a Jabra BT-125 bluetooth headset which worked fine with my previous mobile (6230i / 6131) flawlessly.
I find that with the E61i, I can pair my headset, without issues, but then there is just a beep on my bluetooth headset. Neither can I hear an incoming call (only beeps) nor the caller. Same when I try to call. I hear nothing.
With some re-boots, I manage to pair and get ringtones etc. But then I am not able to use the headset button for anything - receive call, make call etc...
I see some posts about some problem. But no solution.
Please Help........

I had the same issue, but I found way. First be sure to dissable the mac filter, and to select the 802.11 g only in wireless settings of the router. I've let my network vissible. By magic, after selecting 802.11 g only, it connected perfectly.
I hope this helps.
Dorian

Bluetooth connection problems with Jabra

Eversince I bought the Jabra Revo wireless headphones I had problems connecting them to my Macbook 15 Retina. When I get it connected it doesn't play the sound. When I disconnect it I get this message
https://www.dropbox.com/s/e6kj8bdticdq7p1/Screenshot%202014-05-05%2013.34.49.png
The same happens with my Jabra solemate speaker. Most of the times it doesn't work but sometimes it connects and plays perfectly
I updated the Jabra firmware on both devices. They work flawlwssly with my Iphone 5s and with the Ipad Air.
Is there any way to update/repair the bluetooth drivers on my mac? I'm on OSX Mountain Lion.
Thank you!!

There are no "bluetooth drivers."
Try resetting the PRAM and SMC - might help, cannot hurt.
I would also contact the third-party device manufacturer (since the problem seems to be related to their devices).
Barry

OS3 with Jabra BT 3030

Hi,
I just update OS3 and think that it can solve my problem with Jabra BT3030 stereo bluetooth headset but it's not at all. I can listen to music with stereo output but I can't use any button on BT3030 except volume adjustment.
Anyone face the same problem or any ideas?
Thanks a lot
Yos

Hi HimesamA,
this is true with most bluetooth headsets, where the forward/bacward skip buttons do not work. I also have the JabraBT3030 and it does not work, it does work however if I use the Sony dongle (TMR-BT8IP) so it is not the Jabra. Although the Play/Pause button should work, it works for me at least.
Every one here hopes Apple will fix this issue soon. Enjoy wireless music and volume for now
Message was edited by: Mac2dEnd

Bought a 2nd hand iphone4. On the screen it shows "Connect to itunes" after connecting it shows in my itunes "There is a problem with your iphone" Pls help me what to do next? Thanks

Hi. I would really appreciate if someone could help me find a way to solve my problem. I bought a second hand iphone4 from my friend's friend. I fully trust my friend coz she said this iphone is working but it was handed to her lowbat so i get home i recharge it immediately and after charging it, i open and it shows to select language and country and i did select. After this it shows on the screen "Connect to itunes". Then i plug it in to my laptop and connect to itunes. It shows in my itunes " There is a problem with your iphone". Please visit the Service Answer Center to find answers to all your questions etc. To find your nearest Apple Store pls click here. I know i was so stupid to fully trust and paid before i check the phone. Can anybody pls help me with my problem.

It's probably broken. Is there an error number displayed by iTunes?

I just bought an iphone4 and is connected to my wifi at home but I can't bring anything up in the app store, itunes, etc. My husband has a droid 2 and he has no problems with the wifi? Any ideas?

I just bought an iphone4 and is connected to my wifi at home but I can't bring anything up in the app store, itunes, etc. My husband has a droid 2 and he has no problems with the wifi? Any ideas?

If you look at the top left of your screen you will either see a 3G (or 4G if you have AT&T) or you will see the wi-fi symbol. If you don't see the wi-fi symbol you are connecting to Gmail through your cellular data plan, not via wi-fi.
To answer your question, it doesn't happen often but when it does the steps I mentioned above will normally resolve it. Hopefully you won't have any further problem with this.

My iphone is not syching at itunes. Everytime it says your iphone as been diconnected whenever I try to synch it, while logo on phone and itunes says it is still connected. help I have this problem with both my Iphone4 and Iphone5 with backup as well

My iPhone is not synching at iTunes. Every time it says your iPhone as been disconnected whenever I try to synch it, while logo on phone and iTunes says it is still connected. help I have this problem with both my Iphone4 and Iphone5. This problem is with the back up as well.

Hi singhgurwinder79,
The article linked below provides details that can help troubleshoot this error and get your iPhone to sync correctly with iTunes.
iTunes: Resolve USB-related alerts
http://support.apple.com/en-us/HT203843
Regards,
Allen

TS1398 since i update my iphone4 to ios6 i have a problem with my wi-fi i never had this problems before .

since i update my iphone4 to ios6 i have a problem with my wi-fi i never had this problems before .

If it is grey and/or won't allow you to slide it to the on position, follow these steps... More than likely you will need to get it serviced.
iOS: Wi-Fi settings grayed out or dim
Follow these steps to resolve the issue:
Restart your iOS device.
Make sure that airplane mode is off by tapping Settings > Airplane Mode.
Reset the network settings by tapping Settings > General > Reset > Reset Network Settings.
This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
Make sure that your device is using the latest software. To do so, connect your device to your computer and check for updates in iTunes.
If you still can't turn Wi-Fi on, please contact Apple for support and service options. If you can turn Wi-Fi on but are experiencing other issues with Wi-Fi, see how to resolve those Wi-Fi issues.

WiFi only works close to router, DNS fail, Signal Bars present but Safari says no Internet, I've deleted and readded through to reset and full reset, I had no problem with 4.3.2 only 4.3.3 both my iPhone4 and my iPad2. I am now beside router - no problem

Help
WiFi only works close to router, DNS fail, Signal Bars present but Safari says no Internet, I've deleted and re-added through to reset and full reset, I had no problem with 4.3.2 only 4.3.3 both my iPhone4 and my iPad2. I am now beside router - no problem, but go 20 metres and WiFi becomes unstable. Only way to get either to work is disable WiFi either as a Hot Spot or turn it off and use the 3G connection. This worked with 4.3 & 4.3.2 what has gone wrong? I raised it at the Apple Store in Belfast as a problem but was told that there was no problem with Apple but I must have a faulty router - yeah - that's a lot of faulty routers, my home, my office, my holiday home, Starbucks, my friends house, my son's house. I've tried all the 'fixes'. I think it is a plan to force us to buy Apple Routers

Two ways out, I added two more Belkin Access Points in my house in Spain so that I'm not more than 10Mtrs away, (Reinforced Concrete & solar glass 2010)
I bought 3 Apple Airports, 1 x Extreme and 2 x Express (1 as a hard wired AP, 1 as an extender) for my other house (Brick construction 1930's)
Everthing now works perfectly, as I said 'an apple plot', so either blast them with signal or visit your nearest apple store.
Early beta iOS5 (iPad) is also much inproved in Beta 3, I have not had any problem with 'Lion'
Happy hunting!
john

4.1 update - problems with stereo connectivity

I have a high end audio system in my car... Focals, w7, etc etc. It is ran by a avhp3100dvd. Since I updated my iphone4 to the new 4.1 OS, I get random static through the audio system. It is sporadic, lasts 3 to 4 seconds, goes away, and then comes back. It worked earlier today before I did the update. My itouch works fine, so I know it isn't the radio. I restored the iphone4 AGAIN (a clean restore btw, so I just spent an extra hour organizing my iphone again) just to see if the upgrade was corrupted somehow. I still have the same issue. The phone plays like normal with headphones, it is just when the iphone is synced to the radio.
I have seen numerous complaints about the new OS not being compatible with radios after updates. I was very hesitant to purchase the iphone4 because of this, but I tested it before I bought it, and everything worked with 4.0. That is the ONLY reason I purchased the iphone4. I felt like apple forced 3g customers to upgrade after the 4 update made them unusable. 3g phones need to be fixed with the new operating system and PLEASE FIX connection problems with other devices.
It doesn't make sense why an update would mess up connection capabilities with other devices (isn't that a step backward?). The reason why I have purchased apple devices (iphones, macbook, itouch, ipad) is because they typically just work. That hasn't been the case lately. Thanks for reading my rant

Thanks for the rant but it's probably better to contact Apple about this. We don't work for them.
Regards

I have a problem with iphone4 I bought a used and unlocked iphone4 old apple id because the first owner dies please help me how to activate iphone4 I unlocked with icloud

I have a problem with iphone4
I bought a used and unlocked iphone4
old apple id because the first owner dies
please help me how to activate iphone4
I unlocked with icloud

fherly nur arief wrote:
I unlocked with icloud
If you had already removed the device from 'Find My iPhone' in iCloud, then you jus tneed to powercycle the device in order to activate it.
Source: http://support.apple.com/kb/TS4515
"After the device is removed from the previous owner’s account, turn the device off by pressing and holding the Sleep/Wake button located on the top-right side of the device. Then restart your device and proceed with device setup as you would normally."
If it has not been removed, then the activation lock is still active.
If the previous owner cannot remove the device from their account there is nothing you can do unless the place you purchased it from will give you a refund.
Activation Lock: http://support.apple.com/kb/ht5818
What if I purchase a device that is still linked to the previous owner's account?
Contact the previous owner as soon as possible and ask them to erase the device and remove it from their account. For complete instructions, read how to remove a device from a previous owner's account.
How do I check for Activation Lock before purchasing a used device?
When purchasing an iPhone, iPad, or iPod touch from someone other than Apple or an authorized Apple reseller, it is up to you to ensure that the device has been erased and is no longer linked to the previous owner’s account.
Follow each of these steps to make sure that you can use the device you purchase:
Turn the device on and slide to unlock.If the passcode lock screen or the home screen appears, the device has not been erased. Ask the seller to completely erase the device by going to Settings > General > Reset > Erase All Content and Settings. Do not take ownership of any used iPhone, iPad, or iPod touch until it has been erased.
Begin the device setup process.After choosing a language, choosing a country, and connecting to a network, the device will begin activation. If you are asked for the previous owner’s Apple ID and password, the device is still linked to their account. Hand the device back to the seller and ask them to enter their password. If the previous owner is not present, they can remove the device from their account by signing in to icloud.com/find. Do not take ownership of any used iPhone, iPad, or iPod touch until it has been removed from the previous owner’s account.
You will know that a device is ready for you to use when you are asked to “Set up your iPhone", “Set up your iPad", or “Set up your iPod” during the device setup process.

IOS 6 wifi connectivity problem with iPhone 4s

After recently updating both my iPad 3 and iPhone 4S to iOS 6, I began to have problems with my wifi connection on my iPhone. When trying to connect to my home wifi, the iPhone seems to connect but then brings up the "Log In" screen with an Apple website loaded saying the page cannot be found. However my iPad, again also recently updated to iOS 6, has no problem connecting to wifi. Has anyone else experienced this conflict and is Apple working to correct this? My router is a standard U-Verse "2 wire" device. I have performed all the quick fixes I could think of such as restarting the router, restarting my phone etc. please help!

I have a similar fault with my Lexus ct200h fsport, updated to ios 8.1.1 on my iphone4s 64, and the bluetooth sometimes disconnects during calls then re-connects again (by this time the person on the end has hung up) .but bluetooth audio works fine. very frustrating!!

Is anyone having problems with the Bluetooth connection between the iPhone 5s and Renault Media Nav is so is there a solution.

IiPhone 5s Bluetooth problem with Renault media Nav very poor connection, both phone and media Nav are up to date software is there a solution

Here we use MediaNav with iPhone4s, 5, and 5s. I use spotify to stream music, it works great. But each approx. 15s the signal drops for a moment.
I believe there is nothing wrong with the bluetooth connection of the iPhones, as I use them with other audio systems.
The link belows shows the following stated:
"There is a fault with the MediaNav Bluetooth connection when streaming music."
"Renault are aware of the fault and will not be telling any new customers"
"It is not a priority"
"There is no timescale for a fix"
http://www.shesaidbeauty.com/sammakeup/blog/renault-clio-medianav-bluetooth-faul t-830095

Problems with your iphone4 battery life? READ HERE!!!!

I will make this short and simple as I too have been experiencing battery problems with my iphone4 since I upgraded to 4.0.1
Now here is what I THINK is going on, I believe there is a BUG in the wifi software in IOS that tends to drain the battery at a rate of 5% every 10 to 15 minutes or so if you are using the phone for surfing. And if you are not doing any internet surfing at all, it still drops the battery at a similar rate.
Sadly what I have found out is that this doesn't stop even when the phone is on standby. Two hours of my phone just sitting there, I lose about 5% plus. So if I leave wifi on and go to bed, my phone will lose close to 25% of battery over night. However once wifi is OFF, the phone will only lose about 2 to 3% over night. I'll say that's a HUGE difference.
What I also have noticed is that it doesn't matter if I have notifications & push ON or OFF, the battery still gets drained at the same rate as long as wifi is ON.
Once I have realized the culprit, I went from getting a mere 4 to 5 hours of usage to 8 to 9 hours.
So, I suggest that you all only turn wifi on when you NEED it. Once you no longer need it, just shut it off. This is what we have to do until apple fix this problem because it seems like having wifi ON is constantly working the wifi antenna even when the user is not using the wifi connection at all. Apple claims a whopping "up to 10 hours" of internet surfing over wifi. How can that be when my phone will lose over 30% of battery in 10 hours just on standby with wifi ON?
By the way, all my tests were done with my phone on EDGE only.
If you have done this and it worked for you, drop a line here

Note that the battery drain can be of many features you are using in idle or in use. Whether you notice it or not, it'll drain every 10 to 15 minutes on idle based on the several features enabled:
* Push Notifications with 10, 15, 20 apps that run it
* WiFi, cellular, 3G
* Bluetooth active or idle
* Mail set to Push or Fetch by Minutes
* Applications left to run in the background
Nearly every iOS4 app will add the Fast App Switch, File Transfer Services, and Background Location. If you are not using any of these apps, it's recommended to close them down. Whether it's iOS3 or iOS4 apps, they will slowly drain the power through the RAM processor.
If you run a system info application, it'll state how much RAM you are currently occupying with all your multitask apps running. The more RAM used, the more battery power is drained. You can increase battery life by doing the following:
* Settings-Push Notifications-Turn off any application's push that doesn't work anyways or is bothersome to receive. Setting Notifications to OFF in general will repeat a consistent popup to enable it again.
* Settings-Mail-Push-OFF, Fetch-Hourly, Advanced-Schedule to Fetch
* Close all running applications not in use that sends notifications later. They are running in the background draining resources.
* Follow Apple's guidelines on improving battery life such as setting brightness to mid range and automatic or turning off unused features.

Installation problem with NW'04 SR1: database connection failed

Hi all,
while installing NW '04 SR1 on Windows Server 2003 SP1 and MS SQL Server 2000 SP4 I ran into an error related to the database connection. While performing the step "Load Java Database content" SAPinst crashes with the message
com.sap.sql.log.OpenSQLException: Could not load class com.ddtek.jdbc.sqlserver.SQLServerDriver.
The connection to the SLQ Server with e.g. the Query Analyzer is OK. I had a problem with this installation setup before (have a look at the corresponding <a href="https://forums.sdn.sap.com/thread.jspa?threadID=338638&tstart=0">thread</a> ), the JDBC drivers where missing on the installation master but after copying them in the right direction the installation went on with no problem up to this point...
Has anybody an idea what could have happened here? Is this maybe a problem connected to the one I recently had
Below I attached the sapinst.log and jload.log with more detailed messages.
sapinst.log ###########
INFO 2007-03-12 22:06:24
Working directory changed to C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_~1\ONE_HOST.
INFO 2007-03-12 22:06:24
Output of D:\Java/bin/java.exe '-classpath' './sharedlib/antlr.jar;./sharedlib/exception.jar;./sharedlib/jddi.jar;./sharedlib/jload.jar;./sharedlib/logging.jar;./sharedlib/offlineconfiguration.jar;./sharedlib/opensqlsta.jar;./sharedlib/tc_sec_secstorefs.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\base.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\util.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\spy.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jce_export.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jsse.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_smime.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_ssl.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/w3c_http.jar' '-showversion' '-Xmx512m' 'com.sap.inst.jload.Jload' '-sec' 'WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key' '-dataDir' 'S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP' '-job' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML' '-log' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log' is written to the logfile C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_~1\ONE_HOST/jload.java.log.
WARNING 2007-03-12 22:06:26
Execution of the command "D:\Java/bin/java.exe '-classpath' './sharedlib/antlr.jar;./sharedlib/exception.jar;./sharedlib/jddi.jar;./sharedlib/jload.jar;./sharedlib/logging.jar;./sharedlib/offlineconfiguration.jar;./sharedlib/opensqlsta.jar;./sharedlib/tc_sec_secstorefs.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\base.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\util.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\spy.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jce_export.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jsse.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_smime.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_ssl.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/w3c_http.jar' '-showversion' '-Xmx512m' 'com.sap.inst.jload.Jload' '-sec' 'WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key' '-dataDir' 'S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP' '-job' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML' '-log' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log'" finished with return code 1. Output:
java version "1.4.2_13"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_13-b06)
Java HotSpot(TM) Client VM (build 1.4.2_13-b06, mixed mode)
12.03.2007 22:06:25 com.sap.inst.jload.Jload main
INFO: Jload -sec WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key -dataDir S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP -job C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML -log C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log
12.03.2007 22:06:26 com.sap.inst.jload.Jload main
SCHWERWIEGEND: couldn't connect to DB
com.sap.sql.log.OpenSQLException: Could not load class com.ddtek.jdbc.sqlserver.SQLServerDriver.
ERROR 2007-03-12 22:06:26
CJS-20065 Execution of JLoad tool 'D:\Java/bin/java.exe '-classpath' './sharedlib/antlr.jar;./sharedlib/exception.jar;./sharedlib/jddi.jar;./sharedlib/jload.jar;./sharedlib/logging.jar;./sharedlib/offlineconfiguration.jar;./sharedlib/opensqlsta.jar;./sharedlib/tc_sec_secstorefs.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\base.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\util.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\spy.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jce_export.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jsse.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_smime.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_ssl.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/w3c_http.jar' '-showversion' '-Xmx512m' 'com.sap.inst.jload.Jload' '-sec' 'WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key' '-dataDir' 'S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP' '-job' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML' '-log' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log'' aborts with returncode 1. Check 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log' and 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.java.log' for more information.
jload.log ###########
12.03.07 22:06 com.sap.inst.jload.Jload main
INFO: Jload -sec WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key -dataDir S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP -job C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML -log C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log
12.03.07 22:06 com.sap.inst.jload.Jload main
SEVERE: couldn't connect to DB
com.sap.sql.log.OpenSQLException: Could not load class com.ddtek.jdbc.sqlserver.SQLServerDriver.
Best regards,
Bernd

Hello Kairat,
Please follow the below mentioned guide to install it.
Check all the parameters to set and run pre requisite checker before starting installation.
Keep in mind that before starting any SAP installation you should always run prerequisite checker.
https://websmp205.sap-ag.de/instguides --> SAP Netweaver -->SAP Netweaver 7.0 -- > Installations --> EHP2
Regards,
Amit Barnawal

Problem with Iphone4s connection with Jabra HFS001

Similar Messages

Maybe you are looking for