Problem with iphoto 6 NOT DISPLAYING FILM ROLLS WITH film roll titles

i was busy renaming film rolls in the library when for some unexplained reason, the film rolls disappeared & only one enlarged picture is in view for each film roll. I cannot see the thumbnail pics in each film roll. How do i restore how the library shows film rolls? i tried going to View/sortby/film rolls. Nothing changes. Please help
thanks TD for reply: the slider on lower right did help me see all my pictures BUT still cannot view list of individual film rolls with titles. any other ideas? Was in process of backing up film rolls on CD when the library changed: eliminating film roll view.
G4 Mac OS X (10.3.x) 10.3.9

i just kept trying different options with the view menu - restored film rolls with titles.

Similar Messages

I see that there are people that have the problem suddenly almeer notes disappear this is with me also happened and now comes the: If I put a backup that I have my back than notes for 30 seconds back and THEN THEY DISAPPEAR again!

i see that there are people that have the problem suddenly all notes disappear :
this is with me also happend and now comes it
when iputa backup that i have back than i kan see the notes voor 30 seconds and than the disappear again!

Hello,
Just to set your expectations...it's fine to "rant" about things here, but I do hope you are not expecting a formal reply from anyone at BlackBerry. For this site is not a channel for any formal communications with, escalations to, nor support from BlackBerry for any purpose whatsoever. Rather, it is a user-to-user community of volunteers who try to help each other out to the best of their abilities. Note this banner, please, posted at the top of nearly every page of the site:
Consequently, words posted such as "WHAT THE HECK IS WRONG WITH YOU?" are actually directed at the other kind volunteers of this site, who may not respond in the most kindly of fashions. Hopefully, we all can understand that your rant is directed at BlackBerry (though, by placing it here, it is misplaced), but I just wanted to gently caution you about such posts, as well as ensure that your expectation concerning replies is properly set. Also, for new members who join the site, it's always good to have responses to such posts, covering the intended use of the site so that those new members can better understand such things.
On the other hand, if you do desire assistance from other users for your issues, you might consider wording your requests in a manner that would motivate a kind volunteer to provide such.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

When my Firefox language settings are fr_fr or fr_ca Firefox does not display the e with acute accent character correctly when it is displayed in a javascript alert box. However, it does display it correctly when my language settings are just fr. Please t

Firefox does not display the e with acute accent character correctly from a javascript alert box when my browser language settings are fr_ca or fr_fr. However, it does it correctly when my browser language setting is fr. How do i get it to display e with acute accent and other iso8859 characters correctly in a javascript alert box when my browser language settings are fr_fr and fr_ca?
== This happened ==
Every time Firefox opened

Use Unicode (UTF-8) for those characters.
Then you will always be sure that they are displayed correctly.

Problem with data not displaying in website

Hello All,
I am having a problem with one of our applications. It is written in ColdFusion and uses SQL server. The problem that we are having is when we use the URL Http://bma.com (that is not actually the site name) we cannot see all the data that it is suppose to pull in. I get an error on page and when I select to view the error this is what I get
Message: 'WddxRecordset' is undefined Line: 184 Char: 2 Code: 0 URI: http://bma.com/user_maintenance.cfm and Message: 'jsusersTLV' is undefined Line: 3208 Char: 6 Code: 0 URI: http://bma.com/user_maintenance.cfm
If I put the IP address in the URL for example http://165.83.109.246/bma/login.cfm all of the data is displayed as it should.
Any thoughts or sugguestios on how to correct this?
Thanks

Yes, the user_maintenance.cfm is one of the forms that the data is not displaying on. There are multiple forms in the application and that just happens to be one of them. the login.cfm is just the login screen. Once you select your name and enter your password to the application then you can select the user maintenance form. If you select someones name the application should pull in all of that persons information. That is the problem, it is not pulling in any information on the user. We get a blank screen where data should be. When we use the IP address in the URL and select someones name in the user manintenance form, it pulls in all the data from that user as it should.

Hide Edit links not displayed in IE8 with Theme 2

Hi All,
when i use theme 2 from APEX and i am building an application, i can click on the "Show Edit links" button and normally the "Hide Edit Links" button is then displayed, but in this case no button "Hide Edit links" is displayed.
When i switch the theme to Theme 1 then the button is displayed correctly, Swithing back to theme 2 then the button is again not displayed.
When using FireFox the button is normally displayed. in both Themes.
Is this a bug ?
Regards,
Marco

Hi,
I think it is a IE behavior about jQuery :visible selector.
I resolved by replacing in $x_toggle function from apex_4_0.js (from images/javascript) :
if (apex.jQuery(c).filter(':visible').length === 0)
with
if ($.trim(apex.jQuery(c).css('display')).toLowerCase() == 'none')
I use OHS to access APEX . If you use embeded gateway you need to update the resource from XML DB repository .

Appended Comments Fields Not displaying in Open with Access SharePoint 2013

i have a Issues List which is actively been used as a helpdesk ticketing system amongst one of the groups within my organization. Within that list we have Comments Field( Multiple Line Of text) and its set to Append changes to existing text.
One of the Office Admins uses the "Open with Access" Feature of that list to open the list in the access view and do some reporting. We are able to open the list in the Access, but Comments Field is not displaying the appended comments in that
Comments field we talked about above.
Is there something, i need to tunr on to activate that or is it not supported?
Your insights would be helpful

Hi Octopus,
I understand that you want to display the Appended changes to the multiple line of text field when using "Open with Access".
Per my knowledge, the “Append change to existing text” feature is the feature of the item view.
It calls the “Comments” data from the versions and display them on the item view. It is just a “view".
The original data of the versions does not locate in the list items but in the version files.
The contents of the “Comments” column are the latest update contents of this column exist in this list.
So, the contents in the versions will not be displayed in Access when using Open with Access, even if using Export to Excel.
It is by design.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

ADF - Collections with Arrays Not Displaying

I am using JDeveloper 10.12.
Within the applicaiton I am developing I have the following:
nominalRecord - Java Bean
nominalRecordCollection - Collection of nominalRecords
I have generated a data control from the nominalRecordCollection. The data within each of the nominalRecords is being populated correctly - I know this as I have written a sperate test class to display the data to screen.
I have tried to display this collection using ADF by dragging and dropping the nominalRecordCollection data control onto a data page. Unfortunately this does not seem to be displaying the data correctly.
Some of the data within the nominalRecord is contained within Arrays as there are multiple values. For Example:
String surname;
String firstname;
String[] descriptionCode;
String[] descriptionText;
This is necessary because an individual may have more that one descriptive features - I need to store them like this because an individual can have any number of descriptive features. e.g.
01 - Tattoo
02 - Beard
03 - Wig
etc etc.
When the applicaiton is executed the data that is stored within the String variables within the nominalRecord classes are displayed correctly BUT the data stored within the arrays is not displayed at all.
I've speant the afternoon looking into this but have not managed to find a suitbale solution. Can ADF in fact render Collections that have Arrays in them?
I'd appreciate any help/assistance with this matter.
Thanks in advance for your help
David.

What do the JSTL expressions look like where you're trying to access the nested array values?
See example #45 on my Not Yet Documented examples page of my blog for an example based on your setup here.
http://radio.weblogs.com/0118231/stories/2004/09/23/notYetDocumentedAdfSampleApplications.html

Canvas not displaying controls added with addChild

I have a custom class holding some information, a property in
the class is an XML string and another method parses the XML add
creates controls (labels and buttons) based on the xml. I also have
a variable named renderer which is a mx.containers.Canvas. After
the XML is loaded and the controls are added using
Canvas.addChild() I add the Canvas to my stage. The problem I'm
running into is that even though the Canvas is added to the stage,
I cannot see any of the controls inside of the canvas. Doing a
trace(Canvas.numChildren()); I can see that I have added 101
children to my canvas container (which is what my xml file shows)
however they will not display. I know the canvas has been added to
the stage because I can see the scroll bars when i set the policies
to "on" and it even sets the scroll bars correctly if the
components are too big for the canvas and would have to be scrolled
down to see them all, it just doesn't show any of the components.
Anyone run into a similar issue?

Did you set an explicit width and height (or percentWidth and
percentHeight, or styles top, left, top, bottom) on the controls
you create? By default controls have 0x0 size. Creating controls in
MXML causes additional code to be generated which gives the
controls default sizes, but it won't happen in your own
ActionScript code.

Times and Times New Roman Do not display the same with ADE pdf reader

Anyone an idea why?
(These fonts display the same with MS word and Adobe Acrobate reader)

That looks like a grunged version of Times New Roman. You probably have this font installed, and it's likely conflicting with the standard Times New Roman font.

Some fine line Graphics and shading are not displaying at all with OS X Yosemite

Our team is working on a new website layout. It is being developed in photoshop and then saved as a jpeg for review. All of the fine gray lines, boarders and some shading does not display at all. If I save a screen shot and mouse over to choose the screen shot all of the missing lines and shading appear correctly when holding down command-shift-4 to choose the screen shot. After the screen shot is chosen the saves screen shot still does not display the correct lines and shading. Anyone know what is going on? The jpegs are displaying correctly on my iphone and all other Mac Desktop operating systems.

So I returned the previous scanner and purchased the Epson Perfection V600 Photo. I'm still having the same problems and I downloaded the latest driver for it. I also downloaded the driver for my previous Canon Scanner before I returned it. It wasn't working the way I wanted it to work.
It wasn't the scanner after all but I do like the epson better. When I get it to scan, it's scans faster and has more resolution options.
Anyway
Basically I want to be able to scan in Photoshop CC but it's not working the way it used to in previous machines/OSs/photoshops.
I used to be able to go FILE>IMPORT>SCANNER NAME and then continually scan until I was finished. That is not the case and I have noticed it's a problem throughout when doing some research to fix it. I can scan continually if I got to my system preferences, select the "PRINTERS and SCANNERS" and then click "Open scanner".
In photoshop CC I can only get one scan and then I have to close photoshop if I want to do another scan. It's annoying knowing that I was able to in previous machines. Any solutions or plug-ins that I'm missing?
Thanks so much for everyone helping out!
Michael

HT1553 I restored my hard drive from time machine. Why is iPhoto not displaying images properly?

I restored my hard drive from time machine after power blinks corrupted the file system so badly that disk utility could not repair it. Since then, iPhoto has not displayed images correctly. Events are there, and blank squares are shown, but that's all. I rebuilt small and all thumbnails and permissions -- I think the top three or four options in the iPhoto rebuild utility, which took five hours to do but which seems not to have changed anything. The iPhoto library is still more than 100GB, so the photos are there. I didn't choose rebuild from backed up --- whatever the final option on the rebuild menu offers -- because that seems to be appropriate only when a backup is interrupted. Could certainly do it, though. How do I get iphoto behaving again? I have full time machine backups saved automatically and another fairly recent copy on a separate hard drive stored remotely. Thanks for whatever help anyone can provide. I've looked at existing questions and solutions without success so far.

What version of iPhoto and system are your running? Since you've tried rebuilding with iPhoto give this a try:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
If you have an external HD you might want to have the rebuilt copy created on it unless you have well more than 100 GB available on your boot drive.
OT

IPhoto not displaying photos

First off, I am no expert (thats why I am here) but I have been using Macs and iPhoto for some time. I am on an iMac i5 / OSX 10.7.2 / iPhoto 11
After upgrading to Lion, my iPhoto doesn't display all of my photos. In fact, it only displays a small portion of them. Let me break down my observations and what I have tried:
- Many months worth of pics not displayed in the open application
-Pics ARE present in the "contents" of the iPhoto package. They are organized of course in the crazy folder system but eventually I was able to track them down. But iPhoto doesn't display them when open. Many events missing.
-All albums show up empty now because the likely contained photos from the missing events
-I figure something is corrupted so I did a rebuild with apple/option and openning iPhoto. This took forever and in the end it was the same. I believe I clicked all the options when doing so.
-I have searched high and low for the iPhoto plist. I know it sounds crazy but I can't find it anywhere (not in user/library/preference/... lots of other plists there but not for iPhoto). Supposedly it has to exist if I have ever openned iphoto, but I don't know where else to look.
My end goal is to display all the pics and keep them in their appropriate events. Not overly concerned about albums or titles or other info.
I am even willing to just start from scratch with a totally new iPhoto library if that will fix my problem and if things will be put into the current events by date. But I am not sure what the best way to do that would be.
I have read the forums carefully and can't seem to find the solution. Any and all sugestions welcome.
Thanks.
Nick

I will get that for you soon... I am currently importing photos into a brand new iPhoto since I wasn't having luck with the rebuild. Only 12k more to go... It won't let me recreate the error while importing in iPhoto.
As I mentioned above, I created one new library, but didn't like that it put everything into just two events. I deleted the whole thing in hopes that I could get something else to work. In the end I am back to creating a new library and then plan to ask iPhoto to split the events (didn't see that option the first time around). A lot of extra work.
I would like to know what you think about the error it was giving me. As I mentioned at the beginning, I have been unable to find the iPhoto plist anywhere. I looked everywhere it is supposed to be and have had zero luck. I understand that that seems almost impossible, but its true. This might have something to do with the plist error I recieved.
Also, when using iLM, the option to create a new library gives me a sort of skeleton of my other, corrupted library. It lists all the albums and even has the events labeled and dated but there is no content anywhere, not even thumbnails, just the default gray palm tree of an empty event. Not sure what to make of that.
I'll post the error when I can if it doesn't get to late. ( I live in Spain so I'm at least 6 hours ahead of the states!)
Nick

Major Problem - some pages not displaying correctly

All,
I have a problem with some pages not displaying correctly i.e.
SE80 navigation page
F1 help
I am using XP sp2 and we have the latest version of internet explorer 7 (which I cannot uninstall as it is company policy)
SAP version is 6.4c.
I am using SAP Gui 7.10 with the latest patch 710_7.
This is making the system completely unusable for me.
I have read a few forum posts mentioning that upgrading to the latest patch version will resolve this problem, but this clearly has not worked for me.
Can someone please help, how do I actually esculate this to SAP?
<REMOVED BY MODERATOR>
thanks
Edited by: Alvaro Tejada Galindo on Apr 8, 2008 4:07 PM

what kind of useless answer was that? If you have no constructive comments to add please refrain.
I am a SAP developer in ABAP and its related to SE80 which I used to use primarily for editing code (i now have to use se38).
I often use F1 for hints on code etc to use and syntax so it does make it very difficult for me. If there is a more appropriate forum for this please direct me, instead of posting in gibberish english.
Max - I assume you have the same problem and it is also not resolved by the latest patch. I wonder is there a way this can be esculated with SAP?
Edited by: Steve Trillo on Apr 4, 2008 10:43 AM

Problem why images not displaying

I am facing one problem that is images are not displaying why???.I am using apache-jakarta-tomcat-4.1.18 server First I kept images in the intrapp folder images are displying well ,but due to security resasons I moved the images folder in the WEB-INF directory after that images are not displying
consquently i made changes in the web.xml here is the code of web.xml
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>

<servlet>
<servlet-name>MainServlet</servlet-name>
<servlet-class>MainServlet</servlet-class>
<init-param>
<param-name>base</param-name>
<param-value>http://intra.adp.ttr.res.in:8080/intrapp/MainServlet</param-value>
</init-param>
<init-param>
<param-name>jdbcDriver</param-name>
<param-value>oracle.jdbc.OracleDriver</param-value>
</init-param>
<init-param>
<param-name>imageUrl</param-name>
<param-value>http://intra.adp.ttr.res.in:8080/intrapp/WEB-INF/images/</param-value>
</init-param>

<init-param>
<param-name>dbUrl</param-name>
<param-value>jdbc:oracle:oci8:@testdb</param-value>
</init-param>
<init-param>
<param-name>dbUser</param-name>
<param-value>web</param-value>
</init-param>
<init-param>
<param-name>dbPassword</param-name>
<param-value>web</param-value>
</init-param>
</servlet>
<servlet>
<servlet-name>LoginServlet</servlet-name>
<servlet-class>LoginServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>MainServlet</servlet-name>
<url-pattern>/MainServlet</url-pattern>
</servlet-mapping>
</web-app>
in jsp page the image path is
<img src="./WEB-INF/images/register.gif"></img>
can any one help

You should place your images with your jsp pages in a folder "images" then give it path "images/img1.gif"

Exchange 2013 CU5 fresh install suffering issues with services not starting and coexistence with 2007

Hi everyone,
Hope you can help me out on a couple of issues I've been experiencing during the initial stages of a project to upgrade an on premise Exchange 2007 to 2013.
On Monday last week I installed the first Exchange 2013 server into the network after a few weeks of careful planning, information gathering and remediation of our current Exchange 2007 environment and associated systems.
The server itself has been having some issues from the word go, some of which I've resolved but none that are show stoppers but I want to get them resolved before building more servers and setting up the planned 2 x 2 node DAG's
The main problems are as follows:
There's usually one service that does not start following an OS restart and it's not always the same service. So far I've seen the following not start: DAG Management, Migration Workflow, Anti-spam Update, Unified Messaging, UM Call Router, Transport
Service.
The critical system event log entries are complaining of timeouts when the services are starting up but I can't imagine that the servers boot time is too long... It's a 2 vCPU/12Gb vRAM VM, Windows 2012 R2
I receive an error in the Event Log regarding RPC over HTTP Proxy
to one of the 2007 CAS servers (not our primary one). The first error was because the Windows Component was missing but since installing it, disabling Outlook Anywhere, reenabling it, restarting the server, I now have a new error which is shown further down
this post
The Exchange 2013 server install is pretty default, CAS/MBX roles and some basic configuration performed such as new DNS entries, Public SSL certs installed and assigned, URL's updates, SCP updated. I have review and resolved some errors from the event logs
for over chatty warnings about disk space (the warning is that we have loads of space...)
This is a brief outline of the environment:
Exchange 2007 SP3 RU13
UK - Two physical locations in a stretch LAN (100Mb WAN)
4 x CCR Cluster Mailbox Servers in two separate CCR Clusters
Cluster 1 - Windows 2003 R2: One physical, one virtual server - don't ask, legacy install and I know the virtual is not a supported configuration.
Cluster 2 - Windows 2008 R2: Two virtuals - New cluster built following a 4 day failure of Cluster 1. The aim was to move to supported config and decommission cluster 1.
Note: Migration of Cluster 1 to Cluster 2 was halted as 2013 was so close it seemed pointless to continue the migration and instead migrate both Clusters to 2013 once in production.
2 x Virtual Windows 2003 R2 - Hub Transport Servers
2 x Virtual Windows 2003 R2 - Client Access Servers
1 x Virtual Windows 2003 R2 - Unified Messaging Server
1 x Virtual Windows 2003 R2 - Edge Transport Server (DMZ)
US - One physical location
1 x Physical Windows 2008 R2 - Mailbox, Client Access, Hub Transport Server
Exchange 2013 CU5
UK - Installed into same site along side Exchange 2007 servers
1 x Virtual Windows 2012 R2 - Mailbox, Client Access Server
Problem 2 Error Message - Please note, server names and domain name changed:
Log Name:      Application
Source:        MSExchange Front End HTTP Proxy
Date:          18/07/2014 10:00:37
Event ID:      3005
Task Category: Core
Level:         Warning
Keywords:      Classic
User:          N/A
Computer:      EXC2013.domain.local
Description:
[RpcHttp] Marking ClientAccess 2010 server EXC2007CAS1.domain.local (https://EXC2007CAS1.domain.local/rpc/rpcproxy.dll) as unhealthy due to exception: System.Net.WebException: The underlying connection was closed: The connection was closed unexpectedly.
   at System.Net.HttpWebRequest.GetResponse()
   at Microsoft.Exchange.HttpProxy.ProtocolPingStrategyBase.Ping(Uri url)
Event Xml:
<Event xmlns=http://schemas.microsoft.com/win/2004/08/events/event>
<System>
    <Provider Name="MSExchange Front End HTTP Proxy" />
    <EventID Qualifiers="32768">3005</EventID>
    <Level>3</Level>
    <Task>1</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-07-18T09:00:37.000000000Z" />
    <EventRecordID>64832</EventRecordID>
    <Channel>Application</Channel>
    <Computer>EXC2013.domain.local</Computer>
    <Security />
</System>
<EventData>
    <Data>RpcHttp</Data>
    <Data>EXC2007CAS1.domain.local</Data>
    <Data>https://EXC2007CAS1.domain.local/rpc/rpcproxy.dll</Data>
    <Data>System.Net.WebException: The underlying connection was closed: The connection was closed unexpectedly.
   at System.Net.HttpWebRequest.GetResponse()
   at Microsoft.Exchange.HttpProxy.ProtocolPingStrategyBase.Ping(Uri url)</Data>
</EventData>
</Event>

Hi Off2work,
I've gone through the article and the Get-OutlookAnywhere commandlet looks fine (especially when compared with our working CAS).
Having looked through IIS I have spotted two additional misconfigurations with a missing setting to require SSL on the RPC folder and also the .NET version was not set.
I've now set those to Require SSL and .NET 2.0.5072 however this has made no difference following restarted of both 2007 CAS and 2013 servers.
I could potentially reinstall the CAS server or additionally decommission it as we have two of them and the other is not causing any errors with the 2013 server. This broken CAS server doesn't even have DNS records (except it's own hostname) or firewall
rules pointing to it, nor does it have any active client connections if I check with a quick netstat -a
As for UM, it's next on my list following some client/server connectivity testing so I have not yet assigned the SSL to the services or setup the dial plans, etc.
The services do start most of the time, but others then don't so it's not a consistent issue with just this service. On my current boot, the DAG Management service failed to start, but again I don't have a DAG implemented yet.
I will see if UM drops out of that list once I've configured it shortly
Thanks for taking the time to respond (and that goes to DareDevil too)

Hi, I want to know if the quality of a photo book with iphoto is the same that with aperture,

the photos have the same quality, because I used aperture to retouch it, but for me is easy make a photo book with iphoto, I only imported the photos form aperture to iphoto, and I made the photo book, I want to buy it, but before I want to know which one have more quality or if the method of impression, aperture and iphoto, are the same.
so have both the same quality of impression?
And if the answer is no, Can I export my photo book form iphoto to aperture? how?
Thanks a lot

Quality is a personal opinion - I assume (but no one here really knows for sure) that the same vendor does both -
- here are technical details on both - http://support.apple.com/kb/HT3412
in cany case you can not move a photo book from iPhoto to Aperature
And Apple does have a 100% satisfaction guarentee
LN

Problem with iphoto 6 NOT DISPLAYING FILM ROLLS WITH film roll titles

Similar Messages

Maybe you are looking for