Problem with iPhoto import from camera (gets stuck)

Hi, I am having an issue with an import from digital camera to iPhoto. I've had this camera and this MacBook for years without any trouble. The import I am trying to do has about 1600-some photos and a handful of short videos in it, but most are duplicates, so when the import starts, I tell it not to import the duplicates. iPhoto does its thing, but it gets stuck after about 205 new photos. The screen just stays on one image and looks as though it is still importing. I left it for hours and it never advanced. So I clicked the button to stop the import, which didn't seem to work, because the message "Photos are being imported to the photo library. Please wait for the export to complete" came up when I tried to quit iPhoto. So I had to Force Quit. When I reopened, fortunately my Library was intact and the photos that did go through went to a special "recovered" folder. I went through the process again in hopes that it was a glitch, but the same thing happens. I decided to delete the video on the camera that iPhoto seems to keep getting stuck on. This did not help. The same results (as described above) keep happening. I can't figure out what to do. I know I need new hardware sometime soon, but there should be a fix for this... Thank you.

Try using a card reader. That way you can open the memory card as it were an external volume, select and drag the files in small groups to a folder on the Desktop. That way you can isolate those files that are causing the problem.
If there are only a few files that won't cooperate you may have to sacrifice them so you can reformat the memory card using the camera and then test it with some test photos and videos.
Is it just videos that won't copy? See if you can determine which files are causing the problem.
OT

Similar Messages

Problem with photo import from iPhone

I'm trying to import photos from an iPhone and get "the file is in an unrecognized format." What do I do?

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Problem with Variable imported from SAP in universe

I am using BO XI R3 with SAP based OLAP Universe.
I am using a BEx query with a variable to create the universe.
While using the variable in WebI report, the prompt comes but it has no effect in the report. I have noticed that if I select any measure object in the WebI query, then the prompt is working fine. But If I select dimension objects only, then the filter doesn't work.
I need to see some dimensions only in the report based on the filter prompt. Is there any specific way to achieve that without selecting a measure object in the WebI query panel ?
I can delete the filter object in the universe and create my own. But why the filter imported from SAP is malfunctioning ?

Let me elaborate the problem.
I am using BEx query (version 7) to build the universe.
In the BEx query, I have one characteristic "Cons Area" in Rows and one key figure "No of Records" in Columns. In the Characteristic Restrictions, I have one variable B_AREA on Cons Area.
In my universe, by default, I have :
1. One dimension object L01 Cons Area for the characteristic Cons Area.
2. One measure object No of Records for the key figure.
3. Two LOVs LovB_AREA and LovB_AREABase as hidden dimension objects.
4. One hidden filter object under class Cons Area for the variable. "Use filter as mandatory in query" checkbox is checked and "Apply on universe" is selected.
The formula of the objects are as below:
L01 Cons Area : [0BCS_AREA].[LEVEL01]
No of Records:     [Measures].[D6UXU0FKYVITGHUL4JRNT6XRH]
LovB_AREA :     [!V000001].[NAME]
LovB_AREABase :     [!V000001].[CAPTION]
Filter :
<OPTIONAL>
     <FILTER KEY="[!V000001]">
          <CONDITION OPERATORCONDITION="Between">
               <CONSTANT TECH_NAME="@Prompt('B_AREA From','A','Cons Area\LovB_AREABase',mono,primary_key)"/>
               <CONSTANT TECH_NAME="@Prompt('B_AREA To','A','Cons Area\LovB_AREABase',mono,primary_key)"/>
          </CONDITION>
     </FILTER>
</OPTIONAL>
Note : LovB_AREABase has a primary key defined on it as [!V000001].[TECH_NAME]
Now when I am building a WebI report using this universe, If I select Cons Area Object only, then the prompt is coming but has no effect on the result. The data is not being restricted by the prompt.
But If I select the measure object along with the dimension object in my WebI report, then the prompt is working fine.
If I delete the filter from universe and build my own filter in WebI query panel, then it is working absolutely fine.
I can create a filter object in universe also as below which will work.
<OPTIONAL>
     <FILTER KEY="[0BCS_AREA].[LEVEL01]">
          <CONDITION OPERATORCONDITION="Between">
               <CONSTANT CAPTION="@Prompt('B_AREA From','A',,mono,free)"/>
               <CONSTANT CAPTION="@Prompt('B_AREA To','A',,mono,free)"/>
          </CONDITION>
     </FILTER>
</OPTIONAL>
But I want to know why the default filter is not working as expected.

Page number problem with document imported from MS Word.

I am a new Mac/Pages user and imported a Word document to use as a template to help me learn the Pages formatting nuances. This has worked well except for one problem. I have page numbers in the footer, but only the first digit of the page number shows up, i.e. 7,8,9,1,1...etc. I can't find a way to edit or delete the page number imported from Word. I can easily insert the page numbers through Pages but can't get rid of the imported pages numbers. Also, how do I prevent page 1 from receiving a page number?

Hi,
Others have reported difficulty removing page numbers from imported Word docs. I think it can be done, but it may not be worth the effort to repair the imported document when you can easily Select All and Copy the entire document and Paste it into a fresh Pages blank document without the improperly formatted, persistent Word page numbering.
Jerry

I'm having some problem with Text imported from Motion into FCPro

Hey Everyone.
I've got an animation that I created in Motion.
The format for the timeline in Motion is NTSC DV 4:3
Final Cut has the same attributes to the sequence.
I have text on my graphic.... Some of it looks great. Some of it does not.
You can see it here.
http://www.drewwfilms.com/Temp/McClure/Graphic.html
The word "Show" looks terrible, where as the other text looks great.
I do have a filter on the word show... actually it's not even a filter it's just one of the style parameters which is Outline and Face. The outline attribute has a bit of a blur on it.
Still i would think this would copy over into final cut without and issue but for some reason it looks really bad.
Anyone have any ideas on this?
Thanks.
-Fraky

Your problem stems from the bright red on a dark background. It is particularly noticable on text because it is a uniform color.
You might have other elements in your movies that use this exact shade and it wiil happen there, but it is less noticable because that element consists of multiple tones and is probably moving.
Very saturated, bright reds always cause problems in video. It is a limitation of the medium.
If you want to learn more about this facinating subject, the keywords are *Chroma Rise Time*.
The solution: desaturate and/or lighten the red, change the color completely or live with it.
Once I render. I get the pixelation.
Your Motion clip is being rendered to your NTSC DV Sequence setting which is 1:5 compression.
The problem with the red is only made worse due to this.
Message was edited to answer newer information from Fraky.

Problem with movies imported from iPad3

Whenever I import footage into imovie, the footage looks good. When I put that footage into a project it stutters.
It doesnt matter if I specify 24fps or 30fps, the movie judders and stutters.
I do not have this problem with movie footage imported from any other device.
Any ideas?

Whenever I import footage into imovie, the footage looks good. When I put that footage into a project it stutters.
It doesnt matter if I specify 24fps or 30fps, the movie judders and stutters.
I do not have this problem with movie footage imported from any other device.
Any ideas?

Having problem with images imported from photoshop

I am totally new to Fireworks, I am redoing a site that was done using CS2, that is GoLive, Photoshop and Image Ready. I wanted to begin familiarizing myself with Fireworks by starting with using it to make all the web images for the site (jpgs, pngs, etc). It started well but after a while I started getting strange results from FW when I imported PSD files. The PSD imports fine into FW but when I want to "preview" or do a "2-UP" and see what it looks like as a jpg or png I just get a blank image where the jpg or png is supposed to be. However if I "export" the jpg it does get exported, but I would like to preview it to see what the quality is. This doesn't happen every time but at least 50% of the time in the last 2 days, and there seems to be no rhyme or reason behind why it works with some images but not others.
Another thing is that if I add a layer effect to the image such as "inner glow" to the PS image, and then flatten the image to make sure it gets exported to FW, it doesn't get exported. It is as if I never added the layer effect in PS.
Any help on these two issues would be greatly appreciated and help me to continue in perservering with FW.
VL Branko

I don't think I've cracked open Bridge since upgrading to CS5/CS6, and I'm hesitant to start today! I'm therefore kind of assuming that you're starting with PSDs and opening them up in Fireworks. (If you're not doing this, give it a try.)
Regarding the 50% failure of Preview and 2-Up modes, I was thinking that saving the PSDs as native Fireworks PNGs—within Fireworks—might eliminate that problem. It's hard to imagine Fireworks not previewing its own file format, but easier to imagine it failing to properly preview a PSD file. And again, perhaps File > Image Preview might work better for you.
As far as the "inner glow" issue: 1) Be sure to add it into the PSD before importing into Fireworks, and 2) If it doesn't show up, have a look at Filters within the Properties panel for the selected object; you could try selecting Inner Glow within ‘Photoshop Live Effects’ or try out Fireworks' own native Inner Glow filter effect.
Other than for the purpose of familiarizing yourself with Fireworks, you may want to consider why you'd use Fireworks for these graphics, if they were originally created in Photoshop. Small changes in graphic appearance are always possible when moving between applications. For example, Photoshop is color managed whereas Fireworks is not; you therefore might notice a small shift in saturation or tonality between the two applications. Whether this is a concern depends on your final output goals.

Audio sync problem with videos imported from iPod Touch

I have an iPod Touch 4th Generation that I used to shoot video at a family birthday party. When I imported the footage into iMovie '11, the audio is not in sync with the video (video is about two seconds behind audio) and there is only the left channel of audio. I verified that the video on the iPod plays just fine--no audio sync problem, both left and right channels work. I just upgraded to iOS 5 on the iPod Touch. The iMac is running Snow Leopard 10.6.8.
As a workaround, I can import the video into iPhoto instead. When I play the video in iPhoto, there are no audio sync problems and both channels of audio can be heard. I have imported other iPod Touch videos successfully into iMovie '11 in the past few months, but this has been the first time these problems have occurred. Any help would be appreciated.

Premiere cannot handle clips with variable framerate.
Your converted clips need to have constant framerate.
Otherwise use a converter like Handbrake.

Problems with XFL import from AE CS4 limited to 1000 frames

I'm currently working on a JibJab style project where a third party agency have done an animation. Now we have tracked the head motions in AE CS4 and done an export to Flash using XFL, and the motion does not work.
Before this we have done several tests to see if this method would work, so we know it actually does work, but the tests where only a couple of 100 frames long, now the project is over 1500 frames.
The final animation is 60 sec, 25f/s, and after importing the motion into FLASH using XFL nothing happens. The motion is there if we look in the motion editor, the image is there, but nothing happens when i scrub back and forth. This all worked like a charm with the test projects. AND if i try and rightclick the picture or motion editor FLASH freezes, so i know something is REALLY wrong here.
After four hours of bug hunting i have isolated the problem to the number of frames you try to import into FLASH. If the end sequence is more than 1000 frames (exactly!) a extra keyframe is added on the first frame in the motion editor, so there is TWO keyframes on the first frame, where there should only be possible to have one. This happens only if the sequence is more then 1000 frames. If i take the same sequence and export if from AE so its less then 1000 frames everything is fine.
I have attached a screenshot of the extra keyframe that apears in the motion editor. It's allso noteworthy that this extra keyframe can't be changed or adjusted as it does not actualy "excist".
I would like to have this bug confirmed by someone and if someone has a solution? Right now im looking at cutting up the export into "999 frames" sections and then patch it together again in Flash.
Oh, i almost forgot, i work in an OSX enviroment. All feedback is welcome!

it turns out this was a AE issue.
read more here:
http://forums.adobe.com/message/2131807#2131807

CATS report RCATSP01: Problem with statement IMPORT FROM MEMORY ID.

Hi Guys,
I am trying to create a Z custom report using SAP template RCATSP01. In template report there is an IMPORT statement as below.
IMPORT icatsd
catsfields
fieldtab
FROM MEMORY ID 'LR2'.
When I run the report in debug mode, I found there is no data in ICATSD, CATSFIELDS & FIELDSTAB.
What should I do to get the data in these internal tables.
Thanks,
Mini

I don't think this report is meant to be used as a stand-alone report; it's called within CATS time entry (e.g. CAT2 when user select print time sheet) which would export the info to 'LR2' memory prior to calling this report.

Had problems with Snow Leopard from the get-go.....

.....but I was finally able to take my desktop to a local Genius Bar today and the fix was found within minutes.
The problem I was having was that iCal wouldn't open in Snow Leopard. It would just bounce in the dock a few times and then slam shut.
Turns out that the iCal preference files just couldn't make the transition from Leopard to Snow Leopard.
So I made an appointment and took my desktop to the Genius Bar this morning at the Freehold Mall. Turns out it was a simple fix to go from Leopard (10.5) to Snow Leopard (10.6).
I just couldn't get iCal (that I rely on) to work in Snow Leopard and all I had to do was delete the preference files from Leopard (after the switch to Snow) since they got corrupted during the change from Leopard to Snow Leopard. A five second fix......DUH!!!
Cost for the "fix"? Just my time to take it there.
Snow Leopard is now my operating system and it absolutely KICKS *** speed-wise!!!

This has happened to me (I think twice in 2 years). Nowadays I sync notes to iCloud, so if a note is lost, it is almost all recoverable.

Problems with XML import from FCP 7 to Premiere Pro CS6

Afternoon everyone.
I'm currently trying to import an FCP 7 project file that I want to now edit and tweak in Premiere Pro (have recently realised i've been using Premiere far more so would like to start making a full switch over).
I've gathered my original FCP project and exported via XML (Apple Interchange Format, Version 5) and imported it into a blank Premiere Pro project. However it gets to the import window, progresses fully to 100% and then throws this error message at me, and I can't seem to figure out why.
I've tried exporting an XML for the whole project, with all bins/sequences/clips etc. I've also tried individual sequences/bins, and none of them want to import.
Does anyone know why this is happening?
Thanks,
Adam

Okay, after trying both steps in the document above, the missing codecs/preview presets still aren't available when I go to File>New>Sequence. I guess that's the only way to check if they have installed correctly/activated correctly right? It says it's correctly activated though so not sure why it's doing this.
Are these presets also missing in the trial verison of the software?

Problems with photo import from iphone 4 with ios5 to pc

Help, when I try to import my pix using windows it will only import my first 77 pix which are already on my computer from past imports. The other 100 pix on my iphone do not import or even attempt. When the window comes up to import I click yes and it says importing 77 pix??? Why will it not import the other pix. I've recently updated my software to ios 5.0.1 but I'm not sure when I did this vs. the last imported pix. I have icloud but I clicked no on syncing pix to icould just because of all the space it would require. Any ideas???

More info: I can manually copy the pix from my iphone in the pc then paste to my folders in the pc??? I'm using Windows 7 home edition. And the 77 number is not the start/ending point of old pix new pix during software update.

Some JPG and AVI files imported from camera to iphoto, but not all

I just imported from camera to iPhoto using card reader and half the pics and a couple movies came over. The rest aren't recognized by my iMac, even though they say JPG and AVI and still run fine on camera. I installed Perian plugin a while back at the recommendation of one of you, which solved that problem and I just installed the recent update. I used time machine to restore old version, but that didn't work. I don't know if this is a Quicktime (v 7.4.1) issue or a problem with the flashcard. I tried opening via photoshop and iMovie. Photoshop CS3's message says "Could not complete your request because an unknown or invalid JPEG marker type is found." iMovie, when I try to drag movie into it says "The file could not be imported: ... Quicktime couldn't parse it: -2048". Hopefully one of you knows what is going on. Thanks!!!

Are you running a "referenced" or "managed" library?
Give this a try:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.>Click on the Add Library button,
2 - select the library you want to add from those in the selection window.
3 - make sure that in the rebuild window the checkbox "Scavange orphaned photos" is checked.
4 - now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
5 - in the next window name the new library and select the location you want it to be placed. Click on the Create button.
Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
Note 2: Your current library will be left untouched for further attempts at a fix if so desired.
OT

Import From Camera problem

I thought I'd try out the "Import From Camera" script as the first part of my workflow. I had a card with about 30 images on it taken with my Canon 1DMkII. I typically rename my files "YYMMDD_hhmmss", and although there is no explicit way to do this (EXIF Capture Date) with IFC it appeared that using the "modified date" option gave the same results.
I ran the script and immediately encountered several errors - the script said that "One or more of the downloaded image filenames match filenames in the specified destination folder ..." I knew this wasn't the case since all images were taken at different times.
Is there another way to use the EXIF date within IFC? Is this a script I can modify myself in some way?
It does almost everything I want, but the renaming part is the deal-killer.
Any thoughts would be appreciated.
Thanks,
Jeff

Try using a card reader. That way you can open the memory card as it were an external volume, select and drag the files in small groups to a folder on the Desktop. That way you can isolate those files that are causing the problem.
If there are only a few files that won't cooperate you may have to sacrifice them so you can reformat the memory card using the camera and then test it with some test photos and videos.
Is it just videos that won't copy? See if you can determine which files are causing the problem.
OT

Problem with iPhoto import from camera (gets stuck)

Similar Messages

Maybe you are looking for