Problem with IPV6 Firewall since firmware 7.6.1

I have problem with IPV6 Firewall (port forwarding using a HE tunnel) since firmware 7.6.1 upgrade, IPV6 oubound is working, but ports are not forwarding to my local IPV6 adress, have used IPV6 Firewall, and it worked before
Ant sugesttions, solutions?

Go back one firmware version into release 7.6
I had similar problems with an IPv6 tunnel not working anymore after the 7.6.1 upgrade.
When I 'rolled' back to 7.6, my IPv6 tunnel came back working.
I also use the old Airport Express application on my OS/X, the new one with the globe on the black screen is missing IPv6 tabs in the application..

Similar Messages

Hey Guys i have a problem with my mac since last month and it wont boot up it freezes in a grey apple logo and and spinning gear any body know how to fix this?

Hey Guys i have a problem with my mac since last month and it wont boot up it freezes in a grey apple logo and and spinning gear any body know how to fix this?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
How to back up and restore your files
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
How to use and troubleshoot FireWire target disk mode
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Before reconnecting an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode.* The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Post for further instructions.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see above for instructions.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it produces. Look for the line "Permissions repaired successfully" at the end of the output. Then reboot as usual.
Step 6
Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
Step 8
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

HT1998 I have what I believe, though I am not certain, an Airport Extreme 1st generation. My internet speeds on my hardwired pc are running in half and a bit higher on my Mac Pro. Cable claims it is a problem with the router since I can bring the PC speed

Bear with me please as I have never used the community before. I have an Airport Extreme 1st generation at least I think it is a 1st generation. My PC is hardwired and my Mac Pro, obviously wireless. I have 50/8 mbps service but the speeds on my PC run around 20/8 and 30/8 on the Mac. Cable says it is a problem with the airport since my PC speeds rise to 50 when the airport is disconnected. Does anyone know what to do?

The simplest way would be to perform a "soft" reset on the AEBS. This type of reset will temporarily disable all of the AEBS's passwords up to five minutes. This should give you ample time to access the AEBS with the AirPort Utility to change it.
If you don't want to actually change the password, then you can possibly retrieve the password from the OS X Keychain, as follows:
Run the Keychain Access utility found in \Applications\Utilities
In the category column (on the left side of the utilities' window), select "All Items."
In the right column look for your Network Name. It will have a "Kind" of "AirPort network password."
Double-click on your network name listing.
Click on "Show password."
Enter your Mac's administrator's password
Your wireless network's password should now be displayed.

I'm having problems with my internet since I have upgraded. I am afraid to upgrade on my Macbook pro now. I don't want the upgrade to slow down my laptops. Any suggestions?

I'm having problems with my internet since I have upgraded. I am afraid to upgrade on my Macbook pro now. I don't want the upgrade to slow down my laptops. Any suggestions?

Wifi issues are one of the common issues being reported by users. There is not much you can do at this point but wait and hope that th 10.8.1 update will address these issues.

HT6030 I have many problems with my mail since I moved to mavericks. The filter is very sensitive, read mail appears as unread, I can't drag mail to the folders and more. I can't update the mail program as directed on this page, update says my system is u

I have many problems with my mail since I moved to mavericks. The filter is very sensitive, read mail appears as unread, I can't drag mail to the folders and more. I can't update the mail program as directed on this page, update says my system is updated

I don't think that a software update from Apple will solve the issues that you are having. You have a rogue installation. After you posted I have just done the following:
Disk Utility can verify my partitioned Volume (including my boot disk) AND REPAIR the non-boot disks on the same Volume without a glitch. It repairs the non-boot disks containing data smoothly.
I have used Mail to send some mails from some Yahoo and Hotmail accounts to my Thunderbird client containing GMail accounts - absolutely normal.
I have iLife '09 but my iMovie '09 and iPhoto '09 open in a jiffy and I see no issues here. I have 6GB RAM (Maximum) on an early 2008 Macbook Pro with a 750GB hard drive partitioned with 120GB reserved for the Boot Drive.
I am sorry that I cannot help further but I am sure there must be a way to reinstall the software without having to revert to restoring your ML backup. I have two clones and if you have such I would attempt to do that through that rather than through Time Machine - that is of course if you have a cloned drive.
Good luck!

HT4623 updated to ios7 on Sunday - I am having major problems with my phone since - keeps freezing - updated itunes first then backed up my phone to my laptop. Is it worth it at this stage doing a restore?

I updated my iphone 5 to ios7 on Sunday and have been having m?ajor problems with my phone since. It keeps freezing and I have to constantly press the home and on/off switch to get it to restart. I had updated my itunes and backed up the phone before doing the update. I'm getting very frustrated at this stage as the phone is practically useless. Is it worth doing a restore? Bearing in mind that I just tried to do that and got a message to turn off the 'find phone' feature in settings and when I tried to get into settings the phone froze again.

I don't have a good answer for you but reading these forums, it seems that network drives can often cause problems with iTunes like you describe.
Patrick

Problems with regular Texting since iOS 7.0.3

Hello, I have an iPhone 5s recently upgraded to iOS 7.0.3 via OTA update. I never use iMessage, I have an unlimited text plan, so I always have used SMS with everyone. However, after this last update, I have problems with regular SMS. I can send SMS to everyone as usual, but can only get text messages from some-all of them using iPhone 5 with at least the lastest iOS6 version. I have noticed then only way to text them now is to turn on iMessage, otherwise I keep missing their replies. These are people, that until the last upgrade, I was texting with on a regular basis with no problems using plain SMS with iMessage option OFF. Contrary to most, I don't want to use iMessage but rather use regular carrier provided SMS.
For instance, both my son and daughter use an iPhone 5 with iOS 7 (but not the latest patch 7.0.3) installed, I can text with my son OK, but can't get any texts from my daughter, can only communicate with her using iMessage-BTW, we are all on the same network on a family plan. Can't understand this at all. Since I can SMS with some, but not others I don't think this is a problem with my carrier but rather a problem with my phone since the update to 7.0.3, and they say I am the only one they have problem with texting with and I am the only one on the new software version.
Anyone else has noticed this issue.

I wonder if this may have something to do with iMessage on my Macs. Recently updated to Maverirks and the iMessage app on my Macs was set up to my email and mobile phone (it wasn't before). I wonder if this is so, then whoever I send an SMS to that has iMessage on and replies back, will be picked up by iMessage since is turned on on my Mac, since replies go to the Mac but not my phone. If the sender has iMessage off, I get the SMS fine.

HT1391 How can I get a full history of our purchases? We had some problems with some downloads since 5/25/12.We were charged for items that said "Free"? Help

How can I get a full history of our purchases? We had some problems with some downloads since 5/25/12.We were charged for items that said "Free"? Help

iTunes Store menu > View My Account...
Sign in and select "See All" in Purchase History.
You can only see them in "batches" of ten. As far as I know there is no way to obtain a comprehensive summary.
The prices are tabulated in that list. If they were supposed to be free, and they show that you were charged, then click the arrow next to the suspect purchases and click "report a problem".

Hye guys i've a problems with my iPhone : since few days i can't open my application 'apple store ' .. It's very strange ! So have you solutions ?

Hye guys
I've problems with my iPhone , since few days i can't open my application Apple store .. It's very strange because it's the first time ! And everything is okay in my phone .. If you have solutions tell me !

Hello again,
I just realized that it was the Address book I was looking for, and it's there. I'm sorry --and embarrased- for the confusion!
I can't delete the discussion, so please considered resolved!
Thanks!

I had some problems with my pc, since then when I close Firefox it won't reopen unless i go to Task manager and end the process for FF.

I had some problems with my pc, since then when I close Firefox it won't reopen unless i go to Task manager and end the process for FF. I have uninstalled FF and re-installed it and no change.
Walt

See "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* [[Firefox hangs]]

My daughter bought her touch last August. It has had problems with sensors ever since. The store cannot fix it. What should I do now?

My daughter bought a touch last August. It has had problems with sensors ever since and does not hold a charge. We have taken it to the lcoal store twice with no repairs working. What do I do next?

Call Apple and ask to be transferred to Customer Relations. Explain the situation to them and have any case numbers handy. They will take care of you.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

HI pls i am having problem with my iphone4s since i updated to 8.2 i can't check balance of my account and secondly if somebody call me it is indicating no with out name pls what is the solution

HI pls i am having problem with my iphone4s since i updated to 8.2 i can't check balance of my account and secondly if somebody call me it is indicating number with out name pls what is the solution

When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

Am I the only one having problems with ringer volume since the update?

Am I the only one having problems with ringer volume since the update?? I'm hard of hearing and before updating to IOS7 I could hear my alarm and ringer just fine. Volume is turned up all the way and I've chosen the loudest sounds I could and still having a difficult time hearing.

Annie Hall is available on DVD only.
It is not available for streaming and I believe movies available for streaming are the only movies available with the Netflix app on an iOS device.

Found problem with 7.4.2 firmware when using XBox360 wireless

While I don't know exactly what is causing the problem, I have an Airport Express that is extending an Airport network for me and an XBox360 wireless adapter ... after upgrading from 7.4.2 firmware on the base station AND my Airport Express the XBox would regularly lose association with the network and the only way to correct it was to pull power to the Airport Express and hard reset it.
Downgrading the Airport Express back to 7.4.1 (leaving the base Airport at 7.4.2 since it didn't appear to be part of the problem) correctly the problem and now my network is stable again for all users.
I don't see a formal bug or troubleshooting point mentioned here .. but if you are having problems with the XBox360 wireless and the Airport Express at 7.4.2, I would try 7.4.1 until a new version is posted.
Best to all ...
-- mike

My cousin's xbox with the wireless adapter is having the same issue. It sees other access points just fine, but wont see mine. I have Airport Extreme (single band). It was working just fine before the update, and all of the other computers/devices can connect to it just fine. The xbox wireless just cannot see the base station with that firmware. I am having him share the internet from his computer to the xbox, but if that doesnt work then I will have to revert back to 7.4.1.

Time Machine backup problems with firewire 800 since Mavericks

Since I installed Mavericks about a week ago, I have had problems with TM not working with my LaCie external drive. At best, it would not back up when the mac was awakened from sleep mode and in use. When I would open time machine preferences, I would see the "preparing for back up" prompt that would last forever. Not only was it doing that, I have found that it would freeze my mac. I figured this out when I was not able to get my mac to respond from the login screen. It was basically frozen and couldn't log on. I noticed the back up drive light flickering but nothing would happen even with waiting a long time. I finally figured out that shutting off the TM EHD would unfreeze the mac and it would start functioning normal again. This was happening with my external HD daisy chained to another external drive that contains my iPhoto, iMovie and Itunes files. That drive was also connected to the mac using firewire 800. I tried many different configurations, switched the order the drives were daisy chained, tried different cables and even directly connected the TM drive with firewire 800 to the mac, but the problems still persisted. The strange thing is that when I connect the TM drive through USB, it works flawlesly and no hanging up of the computer. Thats what Ive been forced to do. I have my other EHD connected directly through firewire 800 and it works fine. I only have one firewire 800 port, and since it works fine with my other LaCie drive, it makes me think its not the port or macs hardware? I can only guess this is a Time Machine issue or something wrong with my TM drive? I have been in contact with LaCie and given them all these details but I have not heard back yet on what they feel the problem is. I thought I would post this to see if anyone else had some experience with this problem.

Forgot to mention I did that. Completely erased and reformatted HD and then reconnected to TM. Didn't help. I did have the mac hang up while installing Mavericks and had to eventually shut off the external drive. It did that to me the firs time I tried to install Mavericks and I lost all my data because it did a clean install after that. I had another back up on CCC so I just restored from there. This time the update to Mavericks transferred my data. I have had TM hang up my mac in the past on occasion, but I was always able to shut down the drive and then the mac would return to normal. Perhaps I should try to erase and reformat again?

Problem with IPV6 Firewall since firmware 7.6.1

Similar Messages

Maybe you are looking for