Problem with islsm drivers for my wifi card

Hello! I'm using stable version of Arch Linux with newest beyound kernel (2.6.19 AFAIR) and trying to compile islsm drivers for my wifi pci card.
I've downloaded source like it is showed in http://prism54.org/punbb/viewtopic.php?id=1557 and cut headers like it is showed in: http://bbs.archlinux.org/viewtopic.php? … +directory
(i used 'sed -i /linux.config.h/d *' because i didn't compile kernel by self and make searches config file).
Unfortunately after make load i get:
make -C /lib/modules/2.6.19-beyond/build SUBDIRS=/home/radious/islsm MODVERSION=/home/radious/islsm/symbols MKPWD=/home/radious/islsm modules
make[1]: Entering directory `/usr/src/linux-2.6.19-beyond'
Building modules, stage 2.
MODPOST 4 modules
make[1]: Leaving directory `/usr/src/linux-2.6.19-beyond'
FATAL: Module firmware_class not found.
FATAL: Module relayfs not found.
FATAL: Module crc32 not found.
Could anybody help me with this problem, any advice is welcome.
Thank you.
EDIT
Ok, there was no problem:) It's enough to copy *.ko files /lib/modules/KERNEL/misc and load them by modprobe.
This thread can be deletad, thank you.

Hi: Unfortunately, the support pages are not working for most of the newer HP PC's. It has been that way for about a day now. Since I am not employed by nor do I represent HP, I am not sure when they will have the pages working again. Check back again some other time. With the Independence Day holiday weekend in the USA, I would not expect this to be taken care of immediately.

Similar Messages

  • Problems with latest drivers for Audigy 2

    Here is my problem: I have tried several times to install the newest drivers. However my sound card doesn't install correctly. I dl'ed the drivers and the dvd-audio .exe thinking the dvd-audio is what I needed. It wasn't. The dvd-audio program gives me a error message saying no device is found. Going into the control panel --> sounds and audio settings, shows I have no device installed. Likewise in the device manager the little yellow "!" is there, and windows says multimedia audio controller, nothing more. However, if you try to install drivers, you will get a message saying drivers for the device are there, and will be uninstalled to continue installation. Um, what gives? Am I doing something wrong? The original drivers work and so do the beta AL drivers but the latest I can't get to work.... :smileyindifferent:

    The card should have come with a CD. Did you contact your supplier or the store where you got the card, to see if they have the CD for you?
    Cat

  • Проблема с драйвером для видеокарты /The problem with the driver for your video card "atikmdag.sys"

    При загрузке системы ноутбук стал выдавать "синий экран". Запускается только в безопасном режиме. Переустановил систему все работает, но без драйверов на видеокарту. Как только устанавливаешь драйвера на видеокарту просит перезагрузиться, после перезагрузки вместо хода в сисетму снова  "синий экран"  

    fekero
    Thank you for visiting our English HP Support Forum. We are only able to reply to posts written in English. To insure a quick response it would be advisable to post your question in English. The following links are here to assist you if you prefer to post in the following Language Forum.
    English: http://h30434.www3.hp.com
    Spanish: http://h30467.www3.hp.com
    French: http://h30478.www3.hp.com
    Portuguese: http://h30487.www3.hp.com
    German: http://h30492.www3.hp.com
    Korean: http://h30491.www3.hp.com/t5/community/communitypage
    Simplified Chinese: http://h30471.www3.hp.com/t5/community/communitypage
    Cheers,
    KarolB
    I work for HP

  • Downgrade to win7 problem with audio drivers. beats audio software for win7?

    I recently purchased the HP Envy 700-074 from best buy.  it was necessary to downgrade to windows 7 for some work software and I would like proper audio drivers/software for windows 7. Right now it seems to be detecting as Nvidia audio driver but in this case it doesnt allow my front panel audio ports to output audio. I would also like to have beats working. 
    here are the hardware ID's associated with the card
    HDAUDIO\FUNC_01&VEN_10DE&DEV_001C&SUBSYS_38423619&REV_1001
    HDAUDIO\FUNC_01&VEN_10DE&DEV_001C&SUBSYS_38423619
    and here's a quick screenshot of the driver that is associating with it right now.. 
    http://gyazo.com/23499c19d5e2a21f81b9124ad822c07d.png
    even those VEN_10DE's seem to associate to nvidia, but from HP the driver is meant to be IDT high definition audio? is something going on here? 
    the only change i've made to the computer is upgraded to an EVGA Nvidia GT 610 video card.,

    Hi, Paul.
    I have similar problem here.
    I bought HP Envy 810-200nr and I hate W8, so I installed Windows Server 2008 R2, which is my favourite.
    Then I solved numerous problems with chipset drivers and finally it all works, but Audio (IDT HD Audio) does not work.
    Completely silent.
    HDAUDIO\FUNC_01&VEN_111D&DEV_76C7&SUBSYS_103C2AF3&REV_1001
    HDAUDIO\FUNC_01&VEN_111D&DEV_76C7&SUBSYS_103C2AF3
    It looks okay, when playing audio - indicator blinks and shows level, volume can be adjusted, all parametrers - speakers, etc seems okay but silent!
    I tried numerous drivers for W8 and W7 64 but they give "Incompatible version" error.
    Can you advise me what to do? I really want WS2008R2 here, but this audio is weird..

  • Problem with new Scandisk 32GB CompactFlash Memory Card Extreme Pro 600x UDM

    Canon provides an XF utility to read, combine, and export video files from the card to the computer. The utility works well with every CF card that I have used until I bought a new Scandisk CF card. The utility can access the XF files on the card but it cannot play them. Actually it does start to play then stops and starts. When I try to export a file to the computer it will not finish with even the smallest file. There is no problem with any of my other CF cards. Has anyone else seen this problem?

    Now that I am in the correct forum the question is for those users who use the Canon XF Utility - is there any reason for it to act differently with one type of CF card as opposed to another? I have sort of solved the problem by using the PP Media Browser instead of the Canon Utility to read my CF cards.

  • Notebook NC6400 HSTNN-C18C problem with grafic drivers

    hello i have
    NC6400 HSTNN-C18C and i have problem with graphic drivers.i have windows 7 proffesional i found some .but in install has failed installation .i have installed game Farming simulator 15 but i still must install latest graphic drivers.can you send me link where i download drivers thanks for help

    Hi,
    It's a good machine isn't it. Unfortunately no official support:
      http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=1848274
    Please try:
       http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/compaq-nc6400-drivers-for-windo...
    Vista driver on the first link may help.
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Litlle problem with nokia maps for 5800 xm

    hi evryone,
    i have a problem with nokia maps for my 5800 xpressmusi which is i cant find my acces point when itry to GO ONLINE
    please help thank you

    Hi,
    When you switch on your device for the first time, the access points may be configured automatically based on the service provider information in your SIM card. Otherwise contact your operator or service provider to receive the access point settings if you cannot find it..

  • Qosmio X300-130: Problems with some drivers in windows 7 64 bit.

    I have installed normally in my laptop windows 7 64 bit version. Before I continue with my main problems I am in the forum for answers and I found this [post |http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=232906&#232906] . How can I see if have a 32 or a 64 bit BIOS? If I have a 32 how can I make it a 64?
    And now my problems:
    1. I have installed a 64 bit sound drive for windows 7 of Realtek the version 6.0.1.6392 and it only recognizes the 2 speakers above the keyboard. How can I fix this?
    2. My media controller manager is not responding with the drivers for windows 7 64 bit. Should I have the bluetooth on? I tried with media player and VLC and it wasn't responding. How can I fix this?

    >How can I see if have a 32 or a 64 bit BIOS? If I have a 32 how can I make it a 64?
    Start the notebook and press F2. Then you should be able to access the BIOS.
    There you should see the version number. Furthermore you can download the latest BIOS from the Toshiba European driver page.
    >1. I have installed a 64 bit sound drive for windows 7 of Realtek the version 6.0.1.6392 and it only recognizes the 2 speakers above the keyboard. How can I fix this?
    The notebook supports the speakers: main x2 + tweeter x2 + woofer harman/kardon
    All speakers are controlled by sound chip. So you need to install just the Realtek sound driver.
    Further settings can be found in control panel Realtek HD audio manger.

  • T500 Problem with video drivers with Vista 32 / 64 bits

    Hi,
    I tried to reinstall Vista on my T500 (2650-A29), I had Vista 32 bits, and I tried to install Vista 64 bits.
    After installing everything, my video card (Radeon HD 3650) has an error with its drivers. Windows can't load the drivers.
    I installed those drivers: http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70417
    After rebooting, there's still an error, I can make it work by uninstalling the drivers for my video card and reloading. It will install drivers, and switch to the ATI video card.
    But, if I connect to an external display, I have a blue screen...
    Then, if I reboot, my drivers are still erroneous... And Windows still can't load the drivers.
    I retried to reinstall all my system, this time I used the ThinkVantage System Update for installing everything. But I still get the same error and windows can't load the drivers.
    Then, I retried to reinstall all my system but with Vista 32 bits, thinking it was an issue with 64 bits, but I am now under Vista 32bits, and my video card drivers still can't load!
    I don't know what else to do...
    Thanks for your help and sorry for my English, I hope it's understandable.
    Cordially,

    Nobody ?

  • TS1398 I have 2 ipads 1st  ipad 2G and ipad 3G whats the problem with the 3G ipad the wifi is now getting connected to the wifi modem and the ipad 2G is getting connected no problem with the 2G ipad what should i do...?????  And i had checked with my rout

    I have 2 ipads 1st  ipad 2G and ipad 3G whats the problem with the 3G ipad the wifi is now getting connected to the wifi modem and the ipad 2G is getting connected no problem with the 2G ipad what should i do...?????  And I had checked with my iball baton router with the iball sevice provider.

    Hi there Paula120,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    -Griff W. 

  • Problems with graphics drivers

    Hello, I tried to install new drivers to my Ati 6770m (2gb) and there is a problem with almost every driver. For example the newest ati catalyst 14.5 beta.  When the driver is installed, I can't switch to the resolution higher than 1024x768. Ati catalyst control centre is not installed or I there is an error message saying, that the driver is not installed correctly so the control centre can't open. Sometimes the system crashes to the blue screen and I have to reboot. I see this problem with various drivers. The only driver, that is working for me is Ati Catalyst 13.10 mobility beta. And with this driver there's a lot of graphic problems with GTA V. I see squares on all objects in distance when dx11 and AA is turned on. It is unplayable with this driver. Please help.   

    Hey @Tommy2220 ,
    Thanks for the additional information. If you uninstall all that you have in the graphic drivers section of the Device manager, including the drivers that are present. Restart the Notebook, and download from here. You will only need AMD/Intel Switchable High-Definition (HD) Graphics Driver, it includes everything you will need.
    You can also find them , here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system.
    Hope this helps you out.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Problems with ATI drivers and gnome3?

    I've tried to install gnome3 off of the gnome-unstable repo (sudo pacman -S gnome-unstable/gnome gnome-unstable/gdm I'm assuming that's the proper command). However, when GDM starts, my screen just flashes a cursor, goes blank, turns off, and repeats. Is there a problem with ATI drivers or is the package just not working at all right now?

    I'm also having troubles with Catalyst and gnome3 (I'm ussually in i3 btw) just playing with it tho. Seems to detect my graphics as 'VESA: JUNIPER" which probably means it's using some sort of fallback, eitherway it's not very functional and messes with my X server a bit
    EDIT: I can get into gnome, but there's a lot of flickering doing anything, should proabaly check for bugs on their tracker
    EDIT2: https://bbs.archlinux.org/viewtopic.php … 89#p913189 <--- looks like that might be gaining some traction, something to watch
    EDIT3: This bug and This Bug might be relevent, not too recent tho
    And another one
    so yeah..... ATI
    Last edited by jmad980 (2011-04-07 07:37:21)

  • Problem installing lastest drivers for Audigy

    I have installed the drivers (.04.0060) which came on the disk supplied with my Sound Blaster SE card and the card works perfectly but if I try to install either of the drivers below I have problems:?The drivers below will not install properly and the sound malfunctions - no EAX and a cracking sound. [color="#3300ff">Creative Sound Blaster Audigy SE and Audigy Value Driver 0.04.006 and Creative Basic Audio Suite 55.4 )? 20 Apr 06?The drivers below will install and the sound seems to work fine but when I run the sound card diagnostics it reports a problem with Directsound. [color="#3333ff">Creative Sound Blaster Audigy Value/SE/LS and Sound Blaster Li've! 24-bit XP and Windows Vista Pack .04.0077 (63.39 MB)?9 Jul 07?Has anyone else had problems with these drivers and is it really important to install the newer drivers?Details of my system are as follows:?P4HT 3.0 GhzWin XP Home SP2 GB system memoryNvidia Geforce 7600GS 52MBLogitech X230 2. Speakers?Thanks.

    try to download drivers from here

  • TS3694 good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me

    good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me

    No problem, glad to help!
    Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

  • I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area.  I have stayed with 10G since the beginning.  Most months I don't use the 10G.  Verizon has no problem with me paying for Data I don't

    I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area.  I have stayed with 10G since the beginning.  Most months I don't use the 10G.  Verizon has no problem with me paying for Data I don't use.  This month my daughter comes home from College and she accidentally uses 24G.....14 over get blind sided with $140.00 in overages.  I called Verizon today......stopped in to the store today......My neighbor told me they waved charges for her one time.  Lots of charges.....But I'm am getting no help.  Not even an offer of a payment plan to help me out.  I went back just 6 months and I have over paid for 19G.....Seems like they would like to help out their loyal customers!!!!     Does anybody have any suggestions on how to deal with them?   We are not wealthy....or I would just pay this and walk away......

    There is a big misconception in what customers believe a cell carrier is obligated to do.
    You pay a set price to use up to that amount of xx data. It makes no difference if you use it to the paid limit or way under. Its like peace of mind when you don't have to worry about a data counter.
    Your daughter used the data, your plan is quite clear of what overage charges are. Why should or would Verizon wireless just forgive the charges because you are a customer? Your daughter used the data, get the money from her. That is the responsible thing to do.
    There is no "I have been a loyal customer so please remove the $120, or $250, or $2,000.00 since I did not mean to use it"
    Your electric company, or gas company or any other company does not remove valid charges. Why should Verizon wireless?
    Just pay the invoice and don't think you are being mistreated because Verizon is a business and not a charity.
    Good Luck

Maybe you are looking for