Problem with iWork updates after iOS 5.1 install

iTunes showed updates for my iWork apps, but indicated I needed to update to iOS 5.1 first. I updated to iOS 5.1, and then did the updates for Pages, Keynote, and Numbers. The Pages update was successful. The updates for Keynote and Numbers will not load, but now I can't use either app at all. The app shows up with the loading ticker at the bottom, but when touched, indicates "Waiting", then a message comes up that says "Unable to Download Application", with choices for "Done" or "Retry." "Retry" does nothing and the message comes up again. I've tried restarting and resetting with no success.
Thoughts?
Thanks.

Here's how to fix this.
1) Get your playlist in the order you want in iTunes.
2) Create a new playlist and drag all the songs into it from the sorted playlist.
The next 2 are important!!!
3) Do not change the order using any of the column headers.
4) Do not select Copy To Play Order.
5) (Optional) Delete old playlist, rename new playlist.
Sync your device.
The problem is in the sorting. If you don't sort your playlist via the column headers you're OK.
Hope this helps.

Similar Messages

Is anybody else having a problem with Bluetooth functionality after iOS 7? I have lg tone Bluetooth headset that I use while working out, cutting the grass, etc. Before the update I could press the "next track", but anymore.... Help?! Please!!!!!!

Is anybody else having a problem with Bluetooth functionality after iOS 7? I have lg tone Bluetooth headset that I use while working out, cutting the grass, etc. Before the update I could press the "next track", but anymore.... Help?! Please!!!!!!

Tell Apple about it: http://www.apple.com/feedback/iphone.html
Be sure to give as much detail as possible.
I would also check LG's site.

Problems with iPad 3 after IOS 5.1.1 update

Hello.
I connected my iPad to my imac this afternoon for the first time (usually it was synch with my sister's macbook pro), and the software update for ipad immediately started.
I thought it was no harm with updating.
However ever since it was updated, just within a hours, i noticed problems with it.
The screen moved on its own. Without me pressing or holding anything. The camera stopped working too.
I tried restoring through itunes on both my imac and my sis's macbook pro, the problem persisted and it was even more serious.
After restoring i could not even configure. The screen just enlarge, minimise on it's own, going back to the previous page on its own. And after a few seconds it will just HANG there. After restarting it's still the same.
NOW I IT'S LIKE I CANT EVEN USE IT?!?!
I'm getting really fed up with it.

Try a reboot of your ipad. Hold the Sleep/Wake button and Home button simulataneously. Keep holding, ignoring the red slider, until the Apple logo appears. Release the buttons and let the ipad restart. A reboot often fixes numerous problems.
Also are you aware that by suncing with a different computer it is likely the personal stuff you had on your ipad from your imac will be removed?
The ipad is designed to sync with only one device.

Problems with incoming iMessages after iOS 7 update

Hello,
Since updating to iOS 7 (and also installing the 7.02 update), I am having the following problems with iMessages:
1) Messages sent to my phone from another iPhone user do not hit my phone until it connects to the internet, either via wifi or through cellular data. I don't have a lot of data on my cell plan, so I keep cellular data turned 'off' unless I am actively using it. As an example, yesterday, my daughter who has an iPhone had messaged me, and rather than just recieving her messages as regular old texts, they had to sit there in cyberspace until I turned my cellular data on, and then they hit my phone as iMessages. Prior to iOS 7, they came as text messages if my phone was not web-connected and available for an iMessage. I don't like that I had no clue there were messages waiting for me until I activated cellular data so I could check my email.
2) I am not getting push notifications for iMessages. When I'm home and the phone is connected to wifi, if I wake the phone up to use it for something (hit the home button and slide it), a few seconds into using the phone, I will receive iMessages that were sent while the phone was sitting there not being used. As an example, yesterday my daughter had sent several messages to me that were delivered as iMessages since my phone was connected to wifi.... but they didn't hit my phone until I was utilizing the phone for another purpose. They had been sent a couple of hours earlier and I had no clue the messages existed because I hadn't been notified.
3) Sometimes the #2 situation is worse... I don't get the iMessages over wifi until I actually open the Messages app.
Also, when I put iOS 7 on my phone, it deleted all previous conversations that had come through as iMessages. Made me sad. I had a lot of photos that had been sent to me via iMessage that were just there in the conversation threads, and now I don't have those photos anymore.
Any thoughts about how to remedy my issues? I hate not knowing someone with another iPhone is trying to message me. When an android user sends me a message, it just comes through as a text and I know it's there... but fellow iPhone users might as well call me to tell me they have sent me a text, because otherwise... I'll never know!

I have the same problem :(
I backed up my iphone 4S - which had been ugpraded to IOS6 - and when i restored to my Iphone 5 -- my shortcut keys had stopped working!
Turning it off - and back on again makes shortcuts work - but only for so long
All my shortcuts have been copied over correctly.

Problem with Universal Dock after iOS 4.0.2 installation

My universal dock is only two weeks old..It worked fine with iOS 4.0.1.
Today everything was also ok but after I upgraded to 4.0.2 while the phone was sitting on the dock and now I get the error message:
"this accessory is not optimized for this iphone"
Tried to reset settings and clean connectors, but no results.
Did you experience the same?

Also have this very frustrating problem. Completely fine playing audio out through iPod touch 2nd Gen with 4.0 update connected to universal dock. Now after the iOS 4.0.2 update, no audio from speakers when I connect to universal dock (headphones and internal speaker work fine), the volume slider disappears when I connect the iPod to the dock and the TuneIn Radio app says "No Volume Available". Hardware volume buttons and apple remote have no effect.
Resetted settings, downgraded back to iOS 4.0.1, restored to factory nothing seems to work. Strangely enough, tried connecting a friend's 2nd Gen ipod touch which hasn't been updated to ios 4.0 (it has 3.1.3) and the same thing: volume slide goes away when connected to dock, and no audio out from speakers. Speakers are good, tested them separately.
Could it be that the ios 4.0.2 update screwed up the universal dock firmware?

Battery problems with iPhone 4 after iOS 6.1

I've updated to iOS 6.1, and I've been experiencing some really annoying battery problems since I updated. I tried doing the good old iPhone reset, but it still wont charge up to 100%. It stops charging when it reaches 52-56 % battery.
Is there any way of fixing this???

same here..it doesnt work for me too!!
exactly same issue. Apple got something wrong with iOS 6

Problems with EAXC_Theme_PCApp_LB_3_10_13 update after installat

Hi.
I was just wondering if anyone else got this issue before I started looking the knowledge base.
I just tried to install the update for the EAX Console for my card seeing as how I met the redquirements for it and whatever potential problems that might have occured without the update..
Anyways I installed the update, and now for some reason I can not use any of the Mediasource components at all, when I start the machine the Creative system volume program comes up with an error and has to close, also I cannot seem to get the EAX console to come up nor can I do the same with mixer, graphic equilizer, speaker settings. The components that do work are diagnostics, which report no problems with the hardware and the software components connected to it, and the device control.
this is my set up.
P4 2.8, FSB 533
GB pc200 DDR 266
40 GB Seagate ATA HDD
ati Radeon 9600 XT
SB Li've 24bit(Retail not OEM)
I also have a newer LG DVD burner, but seeing as this is a downloaded update and not a disc one, I doubt that it is my newer dri've that is the source of the problem.

Hi.
I was just wondering if anyone else got this issue before I started looking the knowledge base.
I just tried to install the update for the EAX Console for my card seeing as how I met the redquirements for it and whatever potential problems that might have occured without the update..
Anyways I installed the update, and now for some reason I can not use any of the Mediasource components at all, when I start the machine the Creative system volume program comes up with an error and has to close, also I cannot seem to get the EAX console to come up nor can I do the same with mixer, graphic equilizer, speaker settings. The components that do work are diagnostics, which report no problems with the hardware and the software components connected to it, and the device control.
this is my set up.
P4 2.8, FSB 533
GB pc200 DDR 266
40 GB Seagate ATA HDD
ati Radeon 9600 XT
SB Li've 24bit(Retail not OEM)
I also have a newer LG DVD burner, but seeing as this is a downloaded update and not a disc one, I doubt that it is my newer dri've that is the source of the problem.

Problem with 3G network after ios 6.1 upgrade on iphone 3Gs.

I have a iphone 3Gs and not a 5 or 4 and since my ios 6.1 upgrade it's a nightmare for me. I meet a lot of reliability issue with the 3G network. Before the 6.1 upgrade it worked fine. My carrier provider is SFR. It seems to be a "bug" only with 3G. Maybe it's the same as 4Gs but not corrected for 3Gs.
By example I'm using my iphone to join a Free Number to join a confcall system and everytime after sometimes 3 minutes or 15 minutes I'm automatically disconnected - nobody is hearing me and I have to switch off and to reconnect. Others collegue working with me having a iphone 3Gs meet the same issue as me with 3G network.
Do you plan to release the 6.1.1 version for iphone 3Gs ? if yes ? when ?

After testing workaround to disable WIFI when I'm using 3G network. It worked for 1 confcall during 1 hour !! but for the second confcall the duration was only 6 minutes and the network was cut !!! the workaround doesn't work !.
I'm surprise because I don't find similar issue on Internet with "Reliability of 3G on iphone 3Gs after ios 6.1 upgrade!!".
This morning during a call this message appears "Could not activate cellular data network".
Are you in the same case as me ? Do you have a workarounf for me ?

HT4623 Sound and other problems with Ipad 3 after ios 6.1.3 update

I purchased Ipad 3 last year and got problem of losing sound when I restored the Ipad throgh itunes. The sound came back automatically after I charged the device to 100%. Recently I got the same problem when the operating system was Ios 6.1.2 and then i got updated it to ios 6.1.3. The problem has not been solved while has been added up. Now the Ipad operation is slow, its either freezes and crashes frequently. Once it gets in sleep mode then it does not come back untill i press power button and home button togehter for sometime. I have checked all settings like mute and have restored the ios multiple times on two separate PCs but the problem is still there. Please help me what i need to do next.

Try a reboot of your ipad. Hold the Sleep/Wake button and Home button simulataneously. Keep holding, ignoring the red slider, until the Apple logo appears. Release the buttons and let the ipad restart. A reboot often fixes numerous problems.
Also are you aware that by suncing with a different computer it is likely the personal stuff you had on your ipad from your imac will be removed?
The ipad is designed to sync with only one device.

Problems with iCloud backup after iOS 7 update

After I installed iOS 7.0 my iPad mini every time it tries to backup to iCloud it asks for my iCloud password and I submit it every time and then it works fine. How can I get it to remeber it?

I have the same problem :(
I backed up my iphone 4S - which had been ugpraded to IOS6 - and when i restored to my Iphone 5 -- my shortcut keys had stopped working!
Turning it off - and back on again makes shortcuts work - but only for so long
All my shortcuts have been copied over correctly.

Problems with keyboard shortcuts after iOS 6 update?

Just to be clear what I am talking about, I am talking about Settings > General > Keyboard > Shortcuts.
My keyboard shortcuts stopped working after the software update. I have deleted and recreated them and nothing.
Anyone else having this problem?

I have the same problem :(
I backed up my iphone 4S - which had been ugpraded to IOS6 - and when i restored to my Iphone 5 -- my shortcut keys had stopped working!
Turning it off - and back on again makes shortcuts work - but only for so long
All my shortcuts have been copied over correctly.

Ipad 2 64gb 3g Shows There is a problem with your device after IOS 6.1.3 update

Any solution for the above?
or is the apple activation server down at the moment?

From what I'm seeing today many people reporting this problem, may actually be Apple's server, someone did some testing with some iphone? Sorry for the mistakes in the message, since I'm not very good at English. Thanks and I look forward solutions!

Problem with App update after upgrade to ios7

Hi
I have just upgraded to ipads (ipad2 + ipad mini) to ios7.
One thing I have noticed on both.
I updated apps in the app store, now the apps that updated are sitting on the screen, they have been updated, and can be opened.
However in the past once apps had been updated this screen would clear.
I have tried logging out/in in itunes. Hard reset. Restore from itunes.
Still the same.
How do I refresh this screen.
Cheers
Andy.

Hi
I cannot find it again, but I found a possible answer in another forum.
It is correect. Ios 7 has an option for auto app update.
The information is left on the screen to advise you which apps have been updated. Apparently they will clear after a week, only time will tell.
If I find the link I will repost.
One thing I noticed was that if you delete the app the update notice goes, only to return when you reinstall.......weird.
Cheers
Andy.

HT201263 Help please! Problems with iPhone 4 after iOS 6 upgrade

Tried to upgrade iPhone. Got a message saying settings were lost, connect to iTunes. I did this and it said I had to restore. I did this and it said unable to restore due to unknown reason. Now phone keeps trying to upgrade and then restarts. iTunes doesn't recognise my phone.
I have tried all troubleshooting tips and nine work!
Please help!!

same here..it doesnt work for me too!!
exactly same issue. Apple got something wrong with iOS 6

Problems with starting Windows after Boot Camp was installed on a Win-PC

Hi,
i have a very interesting problem for the MacComunity (haha -.-). The problem is: after I have installed Boot Camp from my Snow Leopard DVD on my Windows PC (not my iMac); I can not start the system. In the Boot Camp System where i can set the system to start with, there was only the Boot Camp System available (not Vista). However, the system installs some Vista-Updates and some Updates from Apple Software Update (iTunes 9.2, Quicktime 7, Safari 5, Airport 5, Boot Camp 3.1) on my PC.
Everything was all right but after I have restarted the System nothing happend. the System freezed when the boot-Screen (Intel Logo) appears. The Systemkeyboard was not detected. It only detects a n external apple Keyboard. There are some reactions when I press the keys, but the Monitory is frozen, anyway. What can I do?

Sounds like a lesson in there: don't wait to put OS X on an external drive that is usually off line.
Rush to a store or on-line and get a UPS of the 1500VA sort (APC RS would be nice, or SMART UPS 1000VA).
The directory of the drives could be corrupt.
I have all my equipment, modem, routers, the works, but we had a bad storm and one port on the router/modem is out (the one I used, the modem seems to be okay) and I am worried that the UPS's line filter for DSL in is also 'compromised.'
Storms and power outages can wRECK or cuase havoc.
It sounds like you need to map out bad sectors maybe (zero all in Disk Utility) perhaps. The directory, volume blocks, or even journal file, got scrambled. However, because no test can find it means - to me - it could be the "non user partitions" rather than OS X partition etc. Hence, zero the drive or just reformat it in full.
Why have you not ever with these outages, just continued to live w/o one? I wouldn't just shutdown, I would unplug if a storm approaches.
PS: SMC Reset button is under drive bay #4. Give it a 5-10 seconds depress.

Problem with iWork updates after iOS 5.1 install

Similar Messages

Maybe you are looking for