Problem with javadoc

I am facing problem when trying to generate javadoc for two packages under a same parent hierarchy..
when i give the following command
D:\Projects\ABC>javadoc -d d:\Projects\ABC\docs com.common com.list
where com.common com.list are two packages under
D:\Projects\ABC>
i get this error...
javadoc: No package, class, or source file found named com.Common.
javadoc: No package, class, or source file found named com.la_List
2 errors
what is wrong with the above command???

two suggestions:
1) check for typos - in your post you said com.common
(all lowercase), but in your error message it says
com.Common (uppercase 'C').
2) make sure the current directory is in your
classpath (ie make sure there is a period '.' in your
classpath.)
Hope this helps
Mit was a typo in the question originally the package name is also in small letters and also the error message..

Similar Messages

Problem with Javadoc gen'in two instances of a sourcefile in the class list

Hallo,
I have a set of source files that I'm gen'ing with the ant task javadoc.
sourcefiles="javadocs/PTConfigServer-root/src/com/palantir/config/util/SshUtils.java,
javadocs/PTConfigServer-root/src/com/palantir/config/util/StafUtils.java,
javadocs/PTCommons-root/src/com/palantir/util/Pair.java,
javadocs/PTCommons-root/src/com/palantir/util/XMLTag.java,
javadocs/PTCommons-root/src/com/palantir/util/MutuallyExclusiveSetLock.java,
javadocs/PTCommons-root/src/com/palantir/exception/PalantirException.java,
javadocs/PTCommons-root/src/com/palantir/exception/PalantirUserMessageException.java,
javadocs/PTCommons-root/src/com/palantir/exception/VersionMismatchException.java,
javadocs/PTCommons-root/src/com/palantir/util/Mutable.java,
javadocs/PTCommons-root/src/com/palantir/util/MultiMapSet.java,
javadocs/PTCommons-root/src/com/palantir/util/MultiMapOrderedSet.java,
javadocs/PTCommons-root/src/com/palantir/util/MultiMapList.java,
javadocs/PTCommons-root/src/com/palantir/util/MultiMapConcurrentHashSet.java,
javadocs/PTCommons-root/src/com/palantir/util/MultiMap.java,
javadocs/PTCommons-root/src/com/palantir/util/i18n/DefaultDateFormatterFactory.java,
javadocs/PTCommons-root/src/com/palantir/util/i18n/DateFormatterManager.java,
javadocs/PTCommons-root/src/com/palantir/util/i18n/DateFormatterFactory.java,
javadocs/PTCommons-root/src/com/palantir/util/i18n/DateFormatter.java,
javadocs/PTCommons-root/src/com/palantir/util/awt/Awt.java"
The first two gen properly with only one of each class showing up in the class list. Then, starting with the PTCommons files, javadoc lists each class twice in the class list. In the actual generated documentation, there is only one instance of the file.
Has anyone seen this before?
Mary

Im having a problem with the variables.
Part of my original problem might be each pxi was in a different project. and i had two projects each its own IP. Using this method i did not know how use two differnt variables from two differnet pxi' s with the same program.
if your still following.
i tried a simpler way
i modified my project to include both ip addresses.
this way In my window environment my vi calls the variable. i made sure that i right clicked and chose the variables from the correct ip.
what i have is two status indicators and two update buttons.
the status tells me what stage the test is in
the update button is for the user at the end of the test he can update the screen with the results.
currently only my second pxi is updating status and also the update works
this is my windows vi alias file
[My Computer]
My Computer=localhost
[S4000xH-System1]
S4000xH-System1=192.168.110.10
[S4000xH-System2]
S4000xH-System2=192.168.110.3
do i need to bind to source or use the single writer. im going to try to undo the single writer seems like this would could onluy better it but doesnt seem like its for my application.
i forgot to mention that the varibles i use were there listed as dependancies for the windows evirment have a blue question mark but show what is wrong.
where i have the variables under the ip address there are no blue question marks

Problem with javadoc comment

Hi
i have a comment like this
*<li type="circle"> "31 32 33" (more than one blank space in between)
*/Now i want to put more spaces between numbers but java doc shows only one space! how can i insert more than one space ??

Super Thanks
Where can i get these kind of information??all that is, is the html entity code for a space. you can look up other codes by searching for "html entity table" or something. this way you can also embed "<" and ">" tags without being interpreted, etc.
< = <
= >

[help needed] Javadoc problem with many files

Hi,
I have an Ant script generating my javadoc every night. I have about 5700 java files making about 42MB of data.
It worked fine for two years until two weeks ago, where the script stopped with the following message :
<<
[... big snip...]
[javadoc] C:\Temp\Java\blablabla.java:58: cannot resolve symbol
[...snip...]
[javadoc] public HtmlComponent getCell(
[javadoc] ^
[javadoc] 100 errors
[javadoc] 1 warning
BUILD SUCCESSFUL
Total time: 1 minute 40 seconds
>>
If I execute the javadoc generation on a smaller set of java source files, I still have a lot (100 displayed) of error messages like the one above (which generaly don't stop javadoc), but the generation continues :
<<
[...big snip...]
[javadoc] C:\Temp\Java\xxx.java:12: cannot resolve symbol
[...snip...]
[javadoc] public SelectionNoop(Fig fig) {
[javadoc] ^
[javadoc] Standard Doclet version 1.4.2_08
[javadoc] Generating C:\temp\JavadocNewSI\constant-values.html...
[javadoc] Building tree for all the packages and classes...
[javadoc] Generating C:\temp\JavadocNewSI\com\zz\common\job\common\class-use\ManagerDelegate.html...
[...big snip...]
[javadoc] Generating C:\temp\JavadocNewSI\stylesheet.css...
[javadoc] 6251 warnings
BUILD SUCCESSFUL
Total time: 23 minutes 33 seconds
>>
I don't understand what's going on. It is not a memory problem since it issues an intelligible message.
I also managed to generate javadoc for several subsets, so it can't be a problem with one file or folder crashing javadoc.
Any help welcome,
Tug

Well, it seems that the cause was indeed an empty java file...
The generation fails if the empty java file is the set AND a refering file is in the set. If only one of these conditions are missing, then javadoc goes on...
What I don't understand is that the empty file used to be here since may 2005 and the referring class is unchanged since 2004... it never bugged javadoc before.
Creepy...
Tug

Problems with pacman applet, and advice on a gaming portfolio

Hi
I recently made a pacman applet, im having a few problems with it though, the first time the applet is run on a browser, the ghosts(represented by squares) often dont appear or if they do, they are stuck in walls, this never happens when i run offline on my computer. Is this because the very first time the applet is run, it doesnt load properly, but the second time some of the files are in the cache so it loads fully?
Also everytime i refresh the browser the applet dissapears and is replaced with a blank space and a cross in the top left hand corner, does anyone know the reason for this?
The applet can be found below, if you do decide to play it, please bear in mind what i have said, so it might not load correctly the first time, if this is the case please refresh, or close the broswer and reopen the link! Also you will need to click the applet for it to gain focus before you can move pacman - use the arrow keys the control pacman.
http://www.renaissance-designs.co.uk/Satwant/java/pacman/
Id also be very gratful for some advice - id like a change in career, ive always wanted to get into gaming, ive had some previous knowledge in java i made a programme that could generate its own poetry in java for my dissatation, but i still never had a huge amount of confidence, and so went into websites.
BUT now i have decided to take the leap back into programming and give it a go, which is why ive made this game.
I thought id make a portfolio and try and apply for a few gaming jobs. This applet took me two weeks to make and it was in my spare time, i am fully aware its not perfect, and it doesnt look great, but i would like to know what people think of it, also how many more games do you think i should make, before i apply for gaming jobs? Does anyone have any advice on what would make a good portfolio for a java gaming job?
Thanks alot, i look forward to what you think of the game, and your advice!
SSKenth

sskenth wrote:
Thanks for getting back to me with that information, i didnt know you could see that information with just a simple right click!
But im afraid that doesnt really help me solve the problem, im not sure what all of that information means! :SI have very little experience with applets, but I can tell you what I would do to debug this (forgive me if you already know this stuff).
Look at the stack trace you get in the Java Console that I posted earlier. Each line contains a method that was called from the method on the previous line. So, java.lang.Thread.run() called sun.applet.AppletPanel.run(), which called Room.init(), etc. Look at the topmost line whose method is something you wrote, not something in the standard Java libraries. In your case it looks like PaintSurface.java (specifically, line 22). Look at what line 22 of PaintSurface.java is doing, it's calling Thread.start(). If you check out the Javadoc for Thread.start(), it says IllegalThreadStateException gets thrown if you call start() on a thread that has already started. So that's your problem. Without looking at your code, I'd assume you want to stop your thread in your applet's destroy() override, and instead of reusing it, create a new one each time init() is called.
Ill try and look into, thanks again though, it gives me somthing to work with :D
Btw when you first ran the applet, did all the ghosts(3) load up correctly?Unfortunately, no. The first time I ran it, there was only 1 ghost (or maybe all 3 overlapping each other?) at the top of the screen, and they never moved. Refreshing once made the game play as I think you want it to. Refreshing a third time gave the dreaded red X.
...oh and just out of curiosity,,, did u have fun playing the game :DSure did.

Problem with htmldb 2 (Sorry APEX)!

I installed htmldb 2 on a windows XP, Oracle 10gR1 (which has enhanced by companion CD downloaded form Oracle's site). Everything went OK but when I want to connect to it by this url: http://localhost:7777/pls/htmldb it takes my username,pass but says:
"Service Temporarily Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
Oracle-HTTP-Server/1.3.28 Server at localhost Port 7777"
I noticed many differences between my installed Apache and documents of htmldb. I run a 9.0.4.0.0 Apache server and the dads.conf and httpd.conf are as following:
# ============================================================================
# mod_plsql DAD Configuration File
# ============================================================================
# 1. Please refer to dads.README for a description of this file
# ============================================================================
# Note: This file should typically be included in your plsql.conf file with
# the "include" directive.
# Hint: You can look at some sample DADs in the dads.README file
# ============================================================================
Alias /i/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\images/"
<Location /pls/htmldb>
SetHandler pls_handler
Order deny,allow
Allow from all
AllowOverride None
PlsqlDatabaseUsername HTMLDB_PUBLIC_USER
PlsqlDatabasePassword @BI+fAonVS+7xU8G04irVINWznM6s+A9fuQ==
PlsqlDatabaseConnectString chagh
PlsqlDefaultPage htmldb
PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDocumentPath docs
PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
PlsqlAuthenticationMode Basic
PlsqlNLSLanguage AMERICAN_AMERICA.AL32UTF8
</Location>
# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://www.apache.org/docs/> for detailed information about
# the directives.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# After this file is processed, the server will look for and process
# E:\oracle\product\10.1.0\Companion\Apache\Apache/conf/srm.conf and then E:\oracle\product\10.1.0\Companion\Apache\Apache/conf/access.conf
# unless you have overridden these with ResourceConfig and/or
# AccessConfig directives here.
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do not begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "E:\oracle\product\10.1.0\Companion\Apache\Apache" will be interpreted by the
# server as "E:\oracle\product\10.1.0\Companion\Apache\Apache/logs/foo.log".
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which Apache.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths, however, to avoid
# confusion.
### Section 1: Global Environment
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
# ServerType is either inetd, or standalone. Inetd mode is only supported on
# Unix platforms.
ServerType standalone
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do NOT add a slash at the end of the directory path.
ServerRoot "E:\oracle\product\10.1.0\Companion\Apache\Apache"
# PidFile: The file in which the server should record its process
# identification number when it starts.
PidFile logs/httpd.pid
# ScoreBoardFile: File used to store internal server process information.
# Not all architectures require this. But if yours does (you'll know because
# this file will be created when you run Apache) then you must ensure that
# no two invocations of Apache share the same scoreboard file.
ScoreBoardFile logs/httpd.scoreboard
# In the standard configuration, the server will process httpd.conf (this
# file, specified by the -f command line option), srm.conf, and access.conf
# in that order. The latter two files are now distributed empty, as it is
# recommended that all directives be kept in a single file for simplicity.
# The commented-out values below are the built-in defaults. You can have the
# server ignore these files altogether by using "/dev/null" (for Unix) or
# "nul" (for Win32) for the arguments to the directives.
#ResourceConfig conf/srm.conf
#AccessConfig conf/access.conf
# Timeout: The number of seconds before receives and sends time out.
Timeout 300
# SendBufferSize: controls setsockopt() call made to set send buffer size on
# all sockets. Default OS value on most Windows platforms is too small.
# Larger values can help if the average page size served by OHS is
# large (~64 k)
SendBufferSize 16384
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 15
# Apache on Win32 always creates one child process to handle requests. If it
# dies, another child process is created automatically. Within the child
# process multiple threads handle incoming requests. The next two
# directives control the behaviour of the threads and processes.
# MaxRequestsPerChild: the number of requests each child process is
# allowed to process before the child dies. The child will exit so
# as to avoid problems after prolonged use when Apache (and maybe the
# libraries it uses) leak memory or other resources. On most systems, this
# isn't really needed, but a few (such as Solaris) do have notable leaks
# in the libraries. For Win32, set this value to zero (unlimited)
# unless advised otherwise.
# NOTE: This value does not include keepalive requests after the initial
# request per connection. For example, if a child process handles
# an initial request and 10 subsequent "keptalive" requests, it
# would only count as 1 request towards this limit.
MaxRequestsPerChild 0
# Number of concurrent threads (i.e., requests) the server will allow.
# Set this value according to the responsiveness of the server (more
# requests active at once means they're all handled more slowly) and
# the amount of system resources you'll allow the server to consume.
ThreadsPerChild 50
# Server-pool size regulation. Rather than making you guess how many
# server processes you need, Apache dynamically adapts to the load it
# sees --- that is, it tries to maintain enough server processes to
# handle the current load, plus a few spare servers to handle transient
# load spikes (e.g., multiple simultaneous requests from a single
# Netscape browser).
# It does this by periodically checking how many servers are waiting
# for a request. If there are fewer than MinSpareServers, it creates
# a new spare. If there are more than MaxSpareServers, some of the
# spares die off. The default values are probably OK for most sites.
#MinSpareServers 5
#MaxSpareServers 20
# Limit on total number of servers running, i.e., limit on the number
# of clients who can simultaneously connect --- if this limit is ever
# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
# It is intended mainly as a brake to keep a runaway server from taking
# the system with it as it spirals down...
#MaxClients 150
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, in addition to the default. See also the <VirtualHost>
# directive.
#Listen 3000
#Listen 12.34.56.78:80
# BindAddress: You can support virtual hosts with this option. This directive
# is used to tell the server which IP address to listen to. It can either
# contain "*", an IP address, or a fully qualified Internet domain name.
# See also the <VirtualHost> and Listen directives.
#BindAddress *
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available before they are used.
# Please read the file README.DSO in the Apache 1.3 distribution for more
# details about the DSO mechanism and run `apache -l' for the list of already
# built-in (statically linked and thus always available) modules in your Apache
# binary.
# Note: The order in which modules are loaded is important. Don't change
# the order below without expert advice.
# Example:
# LoadModule foo_module libexec/mod_foo.dll
LoadModule mime_magic_module      modules/ApacheModuleMimeMagic.dll
LoadModule mime_module          modules/ApacheModuleMime.dll
LoadModule dbm_auth_module     modules/ApacheModuleAuthDBM.dll
LoadModule digest_auth_module     modules/ApacheModuleAuthDigest.dll
LoadModule anon_auth_module      modules/ApacheModuleAuthAnon.dll
LoadModule cern_meta_module      modules/ApacheModuleCERNMeta.dll
LoadModule digest_module      modules/ApacheModuleDigest.dll
LoadModule expires_module      modules/ApacheModuleExpires.dll
LoadModule headers_module      modules/ApacheModuleHeaders.dll
LoadModule proxy_module      modules/ApacheModuleProxy.dll
LoadModule speling_module      modules/ApacheModuleSpeling.dll
LoadModule status_module      modules/ApacheModuleStatus.dll
LoadModule info_module          modules/ApacheModuleInfo.dll
LoadModule usertrack_module      modules/ApacheModuleUserTrack.dll
LoadModule vhost_alias_module     modules/ApacheModuleVhostAlias.dll
LoadModule agent_log_module     modules/ApacheModuleLogAgent.dll
LoadModule referer_log_module     modules/ApacheModuleLogReferer.dll
LoadModule perl_module      modules/ApacheModulePerl.DLL
LoadModule fastcgi_module      modules/ApacheModuleFastCGI.dll
LoadModule onsint_module      modules/ApacheModuleOnsint.dll
LoadModule wchandshake_module     modules/ApacheModuleWchandshake.dll
ClearModuleList
AddModule mod_so.c
AddModule mod_onsint.c
AddModule mod_mime_magic.c
AddModule mod_mime.c
AddModule mod_access.c
AddModule mod_auth.c
AddModule mod_negotiation.c
AddModule mod_include.c
AddModule mod_autoindex.c
AddModule mod_dir.c
AddModule mod_cgi.c
AddModule mod_userdir.c
AddModule mod_alias.c
AddModule mod_env.c
AddModule mod_log_config.c
AddModule mod_asis.c
AddModule mod_imap.c
AddModule mod_actions.c
AddModule mod_setenvif.c
AddModule mod_isapi.c
AddModule mod_vhost_alias.c
AddModule mod_log_referer.c
AddModule mod_log_agent.c
AddModule mod_auth_anon.c
AddModule mod_auth_dbm.c
AddModule mod_auth_digest.c
AddModule mod_cern_meta.c
AddModule mod_digest.c
AddModule mod_expires.c
AddModule mod_headers.c
AddModule mod_proxy.c
AddModule mod_speling.c
AddModule mod_info.c
AddModule mod_status.c
AddModule mod_usertrack.c
AddModule mod_perl.c
AddModule mod_fastcgi.c
AddModule mod_wchandshake.c
<IfDefine SSL>
LoadModule ossl_module      modules/ApacheModuleOSSL.DLL
</IfDefine>
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
ExtendedStatus On
### Section 2: 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# Port: The port to which the standalone server listens. Certain firewall
# products must be configured before Apache can listen to a specific port.
# Other running httpd servers will also interfere with this port. Disable
# all firewall, security, and other services if you encounter problems.
# To help diagnose problems use the Windows NT command NETSTAT -a
Port 7777
Listen 7777
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents.
ServerAdmin [email protected]
# ServerName allows you to set a host name which is sent back to clients for
# your server if it's different than the one the program would get (i.e., use
# "www" instead of the host's real name).
# Note: You cannot just invent host names and hope they work. The name you
# define here must be a valid DNS name for your host. If you don't understand
# this, ask your network administrator.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address (e.g., http://123.45.67.89/)
# anyway, and this will make redirections work in a sensible way.
# 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your
# machine always knows itself by this address. If you use Apache strictly for
# local testing and development, you may use 127.0.0.1 as the server name.
ServerName localhost
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "E:\oracle\product\10.1.0\Companion\Apache\Apache\htdocs"
# Each directory to which Apache has access, can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# permissions.
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "E:\oracle\product\10.1.0\Companion\Apache\Apache\htdocs">
# This may also be "None", "All", or any combination of "Indexes",
# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
# Note that "MultiViews" must be named explicitly --- "Options All"
# doesn't give it to you.
Options Indexes FollowSymLinks MultiViews
# This controls which options the .htaccess files in directories can
# override. Can also be "All", or any combination of "Options", "FileInfo",
# "AuthConfig", and "Limit"
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# UserDir: The name of the directory which is appended onto a user's home
# directory if a ~user request is received.
# Under Win32, we do not currently try to determine the home directory of
# a Windows login, so a format such as that below needs to be used. See
# the UserDir documentation for details.
<IfModule mod_userdir.c>
     UserDir "E:\oracle\product\10.1.0\Companion\Apache\Apache\users\"
</IfModule>
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
#<Directory /home/*/public_html>
# AllowOverride FileInfo AuthConfig Limit
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# <Limit GET POST OPTIONS PROPFIND>
# Order allow,deny
# Allow from all
# </Limit>
# <LimitExcept GET POST OPTIONS PROPFIND>
# Order deny,allow
# Deny from all
# </LimitExcept>
#</Directory>
# DirectoryIndex: Name of the file or files to use as a pre-written HTML
# directory index. Separate multiple entries with spaces.
<IfModule mod_dir.c>
DirectoryIndex index.html
</IfModule>
# AccessFileName: The name of the file to look for in each directory
# for access control information.
AccessFileName .htaccess
# The following lines prevent .htaccess files from being viewed by
# Web clients. Since .htaccess files often contain authorization
# information, access is disallowed for security reasons. Comment
# these lines out if you want Web visitors to see the contents of
# .htaccess files. If you change the AccessFileName directive above,
# be sure to make the corresponding changes here.
# Also, folks tend to use names such as .htpasswd for password
# files, so this will protect those as well.
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>
# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
# document that was negotiated on the basis of content. This asks proxy
# servers not to cache the document. Uncommenting the following line disables
# this behavior, and proxies will be allowed to cache the documents.
#CacheNegotiatedDocs
# UseCanonicalName: (new for 1.3) With this setting turned on, whenever
# Apache needs to construct a self-referencing URL (a URL that refers back
# to the server the response is coming from) it will use ServerName and
# Port to form a "canonical" name. With this setting off, Apache will
# use the hostname:port that the client supplied, when possible. This
# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
UseCanonicalName On
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
<IfModule mod_mime.c>
TypesConfig conf/mime.types
</IfModule>
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
# mod_mime_magic is not part of the default server (you have to add
# it yourself with a LoadModule [see the DSO paragraph in the 'Global
# Environment' section], or recompile the server and include mod_mime_magic
# as part of the configuration), so it's enclosed in an <IfModule> container.
# This means that the MIMEMagicFile directive will only be processed if the
# module is part of the server.
<IfModule mod_mime_magic.c>
MIMEMagicFile conf/magic
</IfModule>
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you do define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "|E:\oracle\product\10.1.0\Companion\Apache\Apache\bin\rotatelogs logs/error_log 43200"
# LogLevel: Control the number of messages logged to the error.log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
# Alternate "common" format to use when fronted by webcache:
# LogFormat "%{ClientIP}i %l %u %t \"%r\" %>s %b %h" common_webcache
# When webcache is forwarding requests to OHS, %h becomes the IP of
# the originating webcache server and the real client IP is stored
# in the ClientIP header. The common_webcache format can be used
# in place of the common format when using webcache but with one
# important caveat: if clients are capable of bypassing webcache
# then it is possible to spoof the client IP by manually setting
# the ClientIP header so the %h field should be monitored in such
# an environment. Another alternative to specifying the ClientIP
# header directly in a LogFormat is to use the "UseWebCacheIp"
# directive:
# UseWebCacheIp On
# When this is specified, %h is derived internally from the ClientIP
# header and the access log format does not need to be modified.
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you do
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and not in this file.
CustomLog "|E:\oracle\product\10.1.0\Companion\Apache\Apache\bin\rotatelogs logs/access_log 43200" common
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#CustomLog logs/referer.log referer
#CustomLog logs/agent.log agent
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog logs/access.log combined
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (error documents, FTP directory listings,
# mod_status and mod_info output etc., but not CGI generated documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
ServerSignature On
# Apache parses all CGI scripts for the shebang line by default.
# This comment line, the first line of the script, consists of the symbols
# pound (#) and exclamation (!) followed by the path of the program that
# can execute this specific script. For a perl script, with perl.exe in
# the C:\Program Files\Perl directory, the shebang line should be:
#!c:/program files/perl/perl
# Note you mustnot_ indent the actual shebang line, and it must be the
# first line of the file. Of course, CGI processing must be enabled by
# the appropriate ScriptAlias or Options ExecCGI directives for the files
# or directory in question.
# However, Apache on Windows allows either the Unix behavior above, or can
# use the Registry to match files by extention. The command to execute
# a file of this type is retrieved from the registry by the same method as
# the Windows Explorer would use to handle double-clicking on a file.
# These script actions can be configured from the Windows Explorer View menu,
# 'Folder Options', and reviewing the 'File Types' tab. Clicking the Edit
# button allows you to modify the Actions, of which Apache 1.3 attempts to
# perform the 'Open' Action, and failing that it will try the shebang line.
# This behavior is subject to change in Apache release 2.0.
# Each mechanism has it's own specific security weaknesses, from the means
# to run a program you didn't intend the website owner to invoke, and the
# best method is a matter of great debate.
# To enable the this Windows specific behavior (and therefore -disable- the
# equivilant Unix behavior), uncomment the following directive:
#ScriptInterpreterSource registry
# The directive above can be placed in individual <Directory> blocks or the
# .htaccess file, with either the 'registry' (Windows behavior) or 'script'
# (Unix behavior) option, and will override this server default option.
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
<IfModule mod_alias.c>
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/"..
Alias /jservdocs/ "E:\oracle\product\10.1.0\Companion\Apache\Jserv\docs/"
Alias /javacachedocs/ "E:\oracle\product\10.1.0\Companion\javacache\javadoc/"
Alias /icons/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\icons/"
Alias /i/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\images/"
<Directory "icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
<IfModule mod_perl.c>
     Alias /perl/ "E:\oracle\product\10.1.0\Companion\Apache\Apache/cgi-bin/"
</IfModule>
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
ScriptAlias /cgi-bin/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\cgi-bin/"
# "E:\oracle\product\10.1.0\Companion\Apache\Apache/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "E:\oracle\product\10.1.0\Companion\Apache\Apache\cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
</IfModule>
# End of aliases.
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Format: Redirect old-URI new-URL
# Directives controlling the display of server-generated directory listings.
<IfModule mod_autoindex.c>
# FancyIndexing is whether you want fancy directory indexing or standard
# Note, add the option TrackModified to the IndexOptions default list only
# if all indexed directories reside on NTFS volumes. The TrackModified flag
# will report the Last-Modified date to assist caches and proxies to properly
# track directory changes, but it does not work on FAT volumes.
IndexOptions FancyIndexing
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
DefaultIcon /icons/unknown.gif
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
# HeaderName is the name of a file which should be prepended to
# directory indexes.
# If MultiViews are amongst the Options in effect, the server will
# first look for name.html and include it if found. If name.html
# doesn't exist, the server will then look for name.txt and include
# it as plaintext if found.
ReadmeName README
HeaderName HEADER
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
</IfModule>
# End of indexing directives.
# Document types.
<IfModule mod_mime.c>
# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
AddEncoding x-compress Z
AddEncoding x-gzip gz tgz
# AddLanguage allows you to specify the language of a document. You can
# then use content negotiation to give a browser a file in a language
# it can understand.
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
# Note 2: The example entries below illustrate that in quite
# some cases the two character 'Language' abbriviation is not
# identical to the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. But there is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
# Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
# French (fr) - German (de) - Greek-Modern (el)
# Italian (it) - Korean (kr) - Norwegian (no)
# Portugese (pt) - Luxembourgeois* (ltz)
# Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
# Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
# Russian (ru)
AddLanguage ar .ar
AddLanguage da .dk .da
AddLanguage nl .nl
AddLanguage en .en
AddLanguage et .ee
AddLanguage fi .fi
AddLanguage fr .fr
AddLanguage de .de
AddLanguage el .el
AddLanguage es .es_ES .es
AddLanguage he .he .iw
AddLanguage hu .hu
AddCharset ISO-8859-8 .iso8859-8
AddLanguage it .it
AddLanguage ja .ja
AddCharset ISO-2022-JP .jis
AddLanguage ko .ko
AddLanguage kr .kr
AddCharset ISO-2022-KR .iso-kr
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddCharset ISO-8859-2 .iso-pl
AddLanguage pt .pt
AddLanguage pt-br .pt_BR .pt-br
AddLanguage ltz .lu
AddLanguage ca .ca
AddLanguage sk .sk
AddLanguage sv .sv
AddLanguage th .th
AddLanguage tr .tr
AddLanguage cz .cz .cs
AddLanguage ro .ro
AddLanguage ru .ru
AddLanguage zh-cn .zh_CN
AddLanguage zh-tw .zh_TW
AddCharset Big5 .Big5 .big5
AddCharset WINDOWS-1251 .cp-1251
AddCharset CP866 .cp866
AddCharset ISO-8859-5 .iso-ru
AddCharset KOI8-R .koi8-r
AddCharset UCS-2 .ucs2
AddCharset UCS-4 .ucs4
AddCharset UTF-8 .utf8
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
<IfModule mod_negotiation.c>
LanguagePriority ar en da nl et fi fr de el it ja ko kr no pl pt pt-br ro ru ltz ca es sk sv th tr zh-cn zh-tw zh-cn
</IfModule>
# AddType allows you to tweak mime.types without actually editing it, or to
# make certain files to be certain types.
# For example, the PHP 3.x module (not part of the Apache distribution - see
# http://www.php.net) will typically use:
#AddType application/x-httpd-php3 .php3
#AddType application/x-httpd-php3-source .phps
# And for PHP 4.x, use:
#AddType application/x-httpd-php .php
#AddType application/x-httpd-php-source .phps
AddType application/x-tar .tgz
# AddHandler allows you to map certain file extensions to "handlers",
# actions unrelated to filetype. These can be either built into the server
# or added with the Action command (see below)
# If you want to use server side includes, or CGI outside
# ScriptAliased directories, uncomment the following lines.
# To use CGI scripts:
#AddHandler cgi-script .cgi
# To use server-parsed HTML files
#AddType text/html .shtml
#AddHandler server-parsed .shtml
AddType text/xml xbl
AddType text/x-component htc
# Uncomment the following line to enable Apache's send-asis HTTP file
# feature
#AddHandler send-as-is asis
# If you wish to use server-parsed imagemap files, use
#AddHandler imap-file map
# To enable type maps, you might want to use
#AddHandler type-map var
</IfModule>
# End of document types.
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
# MetaDir: specifies the name of the directory in which Apache can find
# meta information files. These files contain additional HTTP headers
# to include when sending the document
#MetaDir .web
# MetaSuffix: specifies the file name suffix for the file containing the
# meta information.
#MetaSuffix .meta
# Customizable error response (Apache style)
# these come in three flavors
# 1) plain text
#ErrorDocument 500 "The server made a boo boo.
# n.b. the single leading (") marks it as text, it does not get output
# 2) local redirects
#ErrorDocument 404 /missing.html
# to redirect to local URL /missing.html
#ErrorDocument 404 /cgi-bin/missing_handler.pl
# N.B.: You can redirect to a script or a document using server-side-includes.
# 3) external redirects
#ErrorDocument 402 http://some.other_server.com/subscription_info.html
# N.B.: Many of the environment variables associated with the original
# request will not be available to such a script.
# Customize behaviour based on the browser
<IfModule mod_setenvif.c>
# The following directives modify normal HTTP response behavior.
# The first directive disables keepalive for Netscape 2.x and browsers that
# spoof it. There are known problems with these browser implementations.
# The second directive is for Microsoft Internet Explorer 4.0b2
# which has a broken HTTP/1.1 implementation and does not properly
# support keepalive when it is used on 301 or 302 (redirect) responses.
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
# The following directive disables HTTP/1.1 responses to browsers which
# are in violation of the HTTP/1.0 spec by not being able to grok a
# basic 1.1 response.
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
</IfModule>
# End of browser customization directives
# Allow server status reports, with the URL of http://servername/server-status
# Change the ".your_domain.com" to match your domain to enable.
<Location /server-status>
SetHandler server-status
Order deny,allow
Deny from all
Allow from localhost localhost localhost
</Location>
# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".your_domain.com" to match your domain to enable.
#<Location /server-info>
# SetHandler server-info
# Order deny,allow
# Deny from all
# Allow from .your_domain.com
#</Location>
# There have been reports of people trying to abuse an old bug from pre-1.1
# days. This bug involved a CGI script distributed as a part of Apache.
# By uncommenting these lines you can redirect these attacks to a logging
# script on phf.apache.org. Or, you can record them yourself, using the script
# support/phf_abuse_log.cgi.
#<Location /cgi-bin/phf*>
# Deny from all
# ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
#</Location>
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#<IfModule mod_proxy.c>
# ProxyRequests On
# <Directory proxy:*>
# Order deny,allow
# Deny from all
# Allow from .your_domain.com
# </Directory>
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
# Set to one of: Off | On | Full | Block
# ProxyVia On
# To enable the cache as well, edit and uncomment the following lines:
# (no cacheing without CacheRoot)
# CacheRoot "E:\oracle\product\10.1.0\Companion\Apache\Apache\proxy"
# CacheSize 5
# CacheGcInterval 4
# CacheMaxExpire 24
# CacheLastModifiedFactor 0.1
# CacheDefaultExpire 1
# NoCache a_domain.com another_domain.edu joes.garage_sale.com
#</IfModule>
# End of proxy directives.
### Section 3: Virtual Hosts
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
# Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
# for further details before you try to setup virtual hosts.
# You may use the command line option '-S' to verify your virtual host
# configuration.
# Use name-based virtual hosting.
#NameVirtualHost *
#NameVirtualHost 12.34.56.78:80
#NameVirtualHost 12.34.56.78
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#<VirtualHost *>
# ServerAdmin [email protected]
# DocumentRoot /www/docs/dummy-host.example.com
# ServerName dummy-host.example.com
# ErrorLog logs/dummy-host.example.com-error_log
# CustomLog logs/dummy-host.example.com-access_log common
#</VirtualHost>
#<VirtualHost default:*>
#</VirtualHost>
SetEnv PERL5LIB "E:\oracle\product\10.1.0\Companion\perl\5.6.1\lib:E:\oracle\product\10.1.0\Companion\perl\site\5.6.1\lib"
<IfModule mod_perl.c>
# Perl Directives
# PerlWarn On
# PerlFreshRestart On
# PerlSetEnv PERL5OPT Tw
# PerlSetEnv PERL5LIB "E:\oracle\product\10.1.0\Companion\perl\5.6.1\lib:E:\oracle\product\10.1.0\Companion\perl\site\5.6.1\lib"
PerlModule Apache
# PerlModule Apache::Status
PerlModule Apache::Registry
# PerlModule Apache::CGI
# PerlModule Apache::DBI
# PerlRequire
<Location /perl>
SetHandler perl-script
PerlHandler Apache::Registry
AddHandler perl-script .pl
Options +ExecCGI
PerlSendHeader On
</Location>
# <Location /perl-status>
# SetHandler perl-script
# PerlHandler Apache::Status
# order deny,allow
# deny from all
# allow from localhost
# </Location>
</IfModule>
#Protect WEB-INF directory
<DirectoryMatch /WEB-INF/>
Order deny,allow
Deny from all
</DirectoryMatch>
# Setup of FastCGI module
<IfModule mod_fastcgi.c>
Alias /fastcgi/ "E:\oracle\product\10.1.0\Companion\Apache\fastcgi/"
ScriptAlias /fcgi-bin/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\fcgi-bin/"
<Directory "E:\oracle\product\10.1.0\Companion\Apache\Apache\fcgi-bin">
     AllowOverride None
     Options None
     Order allow,deny
     Allow from all
     SetHandler fastcgi-script
     <IfModule mod_ossl.c>
     SSLOptions +StdEnvVars
     </IfModule>
</Directory>
</IfModule>
# Include the configuration for Apache JServ 1.1
#include "E:\oracle\product\10.1.0\Companion\Apache\Jserv\conf\jserv.conf"
# Setup of oprocmgr module.
# This directive identifies each remote apache instance that will be
# sending requests to processes (e.g., JServs), managed by local Apache
# instances. This directive is used by the local process manager to share
# routing information with remote apache instances via non-SSL HTTP messages.
# The directive is repeated for each remote apache instance that will be
# sending requests. The ProcNode directive that refers to the local apache
# instance will be ignored, but may be supplied to facilitate uniformity
# in configuration across apache instances. Arguments to the ProcNode must
# be sufficient to reach the remote instance of apache via non-SSL HTTP
# messages. It is not considered an error if the remote apache instance is
# unreachable, as no assumption is made about the starting order or
# availability of apache instances.
# Syntax: ProcNode <hostname> <port>
# Example: ProcNode abc.com 7777
<IfModule mod_oprocmgr.c>
<Location /oprocmgr-service>
SetHandler oprocmgr-service
Order deny,allow
Deny from all
Allow from localhost localhost localhost
</Location>
<Location /oprocmgr-status>
SetHandler oprocmgr-status
Order deny,allow
Deny from all
Allow from localhost localhost localhost
</Location>
</IfModule>
# Include the mod_oc4j configuration file
include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\mod_oc4j.conf"
# Include the mod_dms configuration file
include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\dms.conf"
# Loading rewrite_module here so it loads before mod_oc4j
LoadModule rewrite_module      modules/ApacheModuleRewrite.dll
# Include the SSL definitions and Virtual Host container
include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\ssl.conf"
# Include the mod_osso configuration file
#include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\mod_osso.conf"
# Include the Oracle configuration file for custom settings
include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\oracle_apache.conf"
------------------------------------------------------------------------------------------------------------------

Firstly, there's no such thing as Apache 9.3, there's Apache 1 (and subversions) and Apache 2 (and subversions). Your error message -
Oracle-HTTP-Server/1.3.28Shows you're using Apache 1.3.28
Secondly, I'm confused by your comment -
I do not have Apache 9.3 or higher but I think oracle should offer this in its companion CDOracle does offer the Apache server, if you're saying you didn't get it from Oracle then where did your Apache server come from?
Thirdly, I notice from your config file -
ErrorLog "|E:\oracle\product\10.1.0\Companion\Apache\Apache\bin\rotatelogs logs/error_log 43200"That you're piping the logs through rotatelogs, are you sure the logfiles haven't just been renamed?

Problem with axis2 and Tomcat

Hello,
I am having a strange problem with Tomcat and axis. I have a webservice that uses axis2 for wsdl2java class generation. When I compile my project in maven a Test is performed. During the test a glassfish server is established and the project is deployed -everything work great with the expected results. However when I try to deploy the webservice on tomcat it has some problems.
At first I tried to call axis code in a POST method that takes a MultiPart message. The code is as below:
*@Path("identifyWavestream")*
*@POST*
*@Consumes(MediaType.MULTIPART_FORM_DATA)*
*@Produces(MediaType.APPLICATION_XML)*
*public String multipartTest(com.sun.jersey.multipart.MultiPart multiPart) throws Exception {*
*// get first body part (index 0)*
*//tomcat shows that the first error is here (line 122 is the nest one with bodypart)*
BodyPart bp = multiPart.getBodyParts().get(0);
BodyPartEntity bodyPartEntity = (BodyPartEntity) bp.getEntity();
InputStream stream = bodyPartEntity.getInputStream();
*//the rest of the code either saves the incoming file or implements the wsdl2java axis interface - neither works.*
And the tomcat error is:
java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
java.util.ArrayList.RangeCheck(Unknown Source)
java.util.ArrayList.get(Unknown Source)
com.webserv.rest.resources.SearchResource.test.multipartTest(SearchResource.java:122)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
java.lang.reflect.Method.invoke(Unknown Source)
com.sun.jersey.server.impl.model.method.dispatch.EntityParamDispatchProvider$TypeOutInvoker._dispatch(EntityParamDispatchProvider.java:138)
com.sun.jersey.server.impl.model.method.dispatch.ResourceJavaMethodDispatcher.dispatch(ResourceJavaMethodDispatcher.java:67)
com.sun.jersey.server.impl.uri.rules.HttpMethodRule.accept(HttpMethodRule.java:124)
com.sun.jersey.server.impl.uri.rules.RightHandPathRule.accept(RightHandPathRule.java:111)
com.sun.jersey.server.impl.uri.rules.ResourceClassRule.accept(ResourceClassRule.java:71)
com.sun.jersey.server.impl.uri.rules.RightHandPathRule.accept(RightHandPathRule.java:111)
com.sun.jersey.server.impl.uri.rules.RootResourceClassesRule.accept(RootResourceClassesRule.java:63)
com.sun.jersey.server.impl.application.WebApplicationImpl._handleRequest(WebApplicationImpl.java:555)
com.sun.jersey.server.impl.application.WebApplicationImpl.handleRequest(WebApplicationImpl.java:514)
com.sun.jersey.server.impl.application.WebApplicationImpl.handleRequest(WebApplicationImpl.java:505)
com.sun.jersey.spi.container.servlet.ServletContainer.service(ServletContainer.java:359)
javax.servlet.http.HttpServlet.service(HttpServlet.java:729)
It was strange to me since this simple approach of handling a Multipart method worked for me earlier. Then I decided skip the handling of multipart method and just call the axis code. But the results also caused an error. I then tried to call the axis code in a simple @GET method (to cross out any issues regarding the multipart) and the result where the same. Again everything works on the maven- glassfish test. In this case the tomcat error is the following:
javax.servlet.ServletException: java.lang.NoSuchMethodError: org.apache.commons.httpclient.HttpConnectionManager.getParams()Lorg/apache/commons/httpclient/params/HttpConnectionManagerParams;
com.sun.jersey.spi.container.servlet.ServletContainer.service(ServletContainer.java:361)
javax.servlet.http.HttpServlet.service(HttpServlet.java:729)
root cause
com.sun.jersey.api.container.MappableContainerException: java.lang.NoSuchMethodError: org.apache.commons.httpclient.HttpConnectionManager.getParams()Lorg/apache/commons/httpclient/params/HttpConnectionManagerParams;
com.sun.jersey.server.impl.model.method.dispatch.ResourceJavaMethodDispatcher.dispatch(ResourceJavaMethodDispatcher.java:74)
com.sun.jersey.server.impl.uri.rules.HttpMethodRule.accept(HttpMethodRule.java:124)
com.sun.jersey.server.impl.uri.rules.RightHandPathRule.accept(RightHandPathRule.java:111)
com.sun.jersey.server.impl.uri.rules.ResourceClassRule.accept(ResourceClassRule.java:71)
com.sun.jersey.server.impl.uri.rules.RightHandPathRule.accept(RightHandPathRule.java:111)
com.sun.jersey.server.impl.uri.rules.RootResourceClassesRule.accept(RootResourceClassesRule.java:63)
com.sun.jersey.server.impl.application.WebApplicationImpl._handleRequest(WebApplicationImpl.java:555)
com.sun.jersey.server.impl.application.WebApplicationImpl.handleRequest(WebApplicationImpl.java:514)
com.sun.jersey.server.impl.application.WebApplicationImpl.handleRequest(WebApplicationImpl.java:505)
com.sun.jersey.spi.container.servlet.ServletContainer.service(ServletContainer.java:359)
javax.servlet.http.HttpServlet.service(HttpServlet.java:729)
root cause
java.lang.NoSuchMethodError: org.apache.commons.httpclient.HttpConnectionManager.getParams()Lorg/apache/commons/httpclient/params/HttpConnectionManagerParams;
org.apache.axis2.transport.http.AbstractHTTPSender.initializeTimeouts(AbstractHTTPSender.java:454)
org.apache.axis2.transport.http.AbstractHTTPSender.getHttpClient(AbstractHTTPSender.java:514)
org.apache.axis2.transport.http.HTTPSender.sendViaPost(HTTPSender.java:156)
org.apache.axis2.transport.http.HTTPSender.send(HTTPSender.java:75)
org.apache.axis2.transport.http.CommonsHTTPTransportSender.writeMessageWithCommons(CommonsHTTPTransportSender.java:371)
org.apache.axis2.transport.http.CommonsHTTPTransportSender.invoke(CommonsHTTPTransportSender.java:209)
org.apache.axis2.engine.AxisEngine.send(AxisEngine.java:448)
org.apache.axis2.description.OutInAxisOperationClient.send(OutInAxisOperation.java:401)
org.apache.axis2.description.OutInAxisOperationClient.executeImpl(OutInAxisOperation.java:228)
org.apache.axis2.client.OperationClient.execute(OperationClient.java:163)
com.webserv.rest.webapp.IntSoapServiceStub.getServerData(IntSoapServiceStub.java:2447)
com.webserv..rest.resources.AIntSoapImpl.getServerData(AIntSoapImpl.java:112)
com.webserv..rest.resources.SearchResource.test.pingTest(SearchResource.java:167)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
java.lang.reflect.Method.invoke(Unknown Source)
com.sun.jersey.server.impl.model.method.dispatch.EntityParamDispatchProvider$TypeOutInvoker._dispatch(EntityParamDispatchProvider.java:138)
com.sun.jersey.server.impl.model.method.dispatch.ResourceJavaMethodDispatcher.dispatch(ResourceJavaMethodDispatcher.java:67)
com.sun.jersey.server.impl.uri.rules.HttpMethodRule.accept(HttpMethodRule.java:124)
com.sun.jersey.server.impl.uri.rules.RightHandPathRule.accept(RightHandPathRule.java:111)
com.sun.jersey.server.impl.uri.rules.ResourceClassRule.accept(ResourceClassRule.java:71)
com.sun.jersey.server.impl.uri.rules.RightHandPathRule.accept(RightHandPathRule.java:111)
com.sun.jersey.server.impl.uri.rules.RootResourceClassesRule.accept(RootResourceClassesRule.java:63)
com.sun.jersey.server.impl.application.WebApplicationImpl._handleRequest(WebApplicationImpl.java:555)
com.sun.jersey.server.impl.application.WebApplicationImpl.handleRequest(WebApplicationImpl.java:514)
com.sun.jersey.server.impl.application.WebApplicationImpl.handleRequest(WebApplicationImpl.java:505)
com.sun.jersey.spi.container.servlet.ServletContainer.service(ServletContainer.java:359)
javax.servlet.http.HttpServlet.service(HttpServlet.java:729)
I think it is also a good ide to post the pom.xml file :
Edited by: 803864 on 2010-10-21 00:30

I think it is also a good ide to post the pom.xml file:
+<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"+
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/maven-v4_0_0.xsd">
+<modelVersion>4.0.0</modelVersion>+
+<groupId>com.myProjects</groupId>+
+<artifactId>audioid-rest-interface</artifactId>+
+<packaging>war</packaging>+
+<name>AudioID Rest Interface</name>+
+<version>0.1</version>+
+<dependencies>+
++
+<dependency>+
+<groupId>com.sun.jersey.contribs</groupId>+
+<artifactId>jersey-multipart</artifactId>+
+<version>1.0.1</version>+
+</dependency>+
+<dependency>+
+<groupId>com.sun.jersey</groupId>+
+<artifactId>jersey-client</artifactId>+
+<version>1.0.1</version>+
+</dependency>+
+<dependency>+
+<groupId>com.sun.jersey</groupId>+
+<artifactId>jersey-bundle</artifactId>+
+<version>1.0.1</version>+
+</dependency>+
+<dependency>+
+<groupId>commons-logging</groupId>+
+<artifactId>commons-logging</artifactId>+
+<version>1.0.4</version>+
+</dependency>+
+<dependency>+
+<groupId>commons-collections</groupId>+
+<artifactId>commons-collections</artifactId>+
+<version>3.1</version>+
+</dependency>+
+<dependency>+
+<groupId>org.slf4j</groupId>+
+<artifactId>slf4j-log4j12</artifactId>+
+<version>1.5.6</version>+
+</dependency>+
+<dependency>+
+<groupId>junit</groupId>+
+<artifactId>junit</artifactId>+
+<version>3.8.2</version>+
+<scope>test</scope>+
+</dependency>+
+<dependency>+
+<groupId>org.glassfish.distributions</groupId>+
+<artifactId>web-all</artifactId>+
+<version>10.0-build-20080430</version>+
+<scope>test</scope>+
+</dependency>+
+<dependency>+
+<groupId>org.glassfish.embedded</groupId>+
+<artifactId>gf-embedded-api</artifactId>+
+<version>1.0-alpha-4</version>+
+<scope>test</scope>+
+</dependency>+
+<dependency>+
+<groupId>com.sun.jersey</groupId>+
+<artifactId>jersey-server</artifactId>+
+<version>1.0.3.1</version>+
+<scope>test</scope>+
+</dependency>+
+<dependency>+
+<groupId>com.sun.jersey.contribs</groupId>+
+<artifactId>maven-wadl-plugin</artifactId>+
+<version>1.0.3.1</version>+
+</dependency>+
+<dependency>+
+<groupId>org.hibernate</groupId>+
+<artifactId>hibernate</artifactId>+
+<version>3.2.5.ga</version>+
+<exclusions>+
+<exclusion>+
+<groupId>javax.transaction</groupId>+
+<artifactId>jta</artifactId>+
+</exclusion>+
+<exclusion>+
+<groupId>cglib</groupId>+
+<artifactId>cglib</artifactId>+
+</exclusion>+
+</exclusions>+
+</dependency>+
+<dependency>+
+<groupId>org.apache.axis2</groupId>+
+<artifactId>axis2</artifactId>+
+<version>1.4.1</version>+
+</dependency>+
++
+<dependency>+
+<groupId>org.apache.axis2</groupId>+
+<artifactId>axis2-aar-maven-plugin</artifactId>+
+<version>1.4.1</version>+
+<scope>test</scope>+
+</dependency>+
+<dependency>+
+<groupId>org.apache.axis2</groupId>+
+<artifactId>axis2-java2wsdl</artifactId>+
+<version>1.4.1</version>+
+<scope>test</scope>+
+</dependency>+
+<dependency>+
+<groupId>org.apache.axis2</groupId>+
+<artifactId>axis2-xmlbeans</artifactId>+
+<version>1.4.1</version>+
+</dependency>+
++
+<dependency>+
+<groupId>com.sun.xml.bind</groupId>+
+<artifactId>jaxb-impl</artifactId>+
+<version>2.1.12</version>+
+</dependency>+
+<dependency>+
+<groupId>cglib</groupId>+
+<artifactId>cglib-nodep</artifactId>+
+<version>2.1_3</version>+
+</dependency>+
+</dependencies>+
+<build>+
+<finalName>audioid-rest-interface</finalName>+
+<plugins>+
+<plugin>+
++
++
+<groupId>com.sun.tools.xjc.maven2</groupId>+
+<artifactId>maven-jaxb-plugin</artifactId>+
+<version>1.1</version>+
+<executions>+
+<execution>+
+<phase>generate-sources</phase>+
+<goals>+
+<goal>generate</goal>+
+</goals>+
+</execution>+
+</executions>+
+<configuration>+
+<generatePackage> com.webserv.wsparameters</generatePackage>+
+<schemaDirectory>../audioid-rest-interface/src/main/resources+
+</schemaDirectory>+
+<includeSchemas>+
+<includeSchema>**/*.xsd</includeSchema>+
+</includeSchemas>+
+<extension>true</extension>+
+<strict>false</strict>+
+<verbose>false</verbose>+
+</configuration>+
+</plugin>+
+<plugin>+
+<groupId>org.apache.maven.plugins</groupId>+
+<artifactId>maven-javadoc-plugin</artifactId>+
++
+<executions>+
+<execution>+
+<goals>+
+<goal>javadoc</goal>+
+</goals>+
+<phase>compile</phase>+
+</execution>+
+</executions>+
+<configuration>+
+<encoding>UTF-8</encoding>+
+<verbose>false</verbose>+
+<show>public</show>+
+<subpackages> com.webserv.rest.rest.resources: com.webserv.rest.rest.commons: com.webserv.wsparameters+
+</subpackages>+
+<doclet>com.sun.jersey.wadl.resourcedoc.ResourceDoclet</doclet>+
+<docletPath>${path.separator}${project.build.outputDirectory}+
+</docletPath>+
+<docletArtifacts>+
+<docletArtifact>+
+<groupId>com.sun.jersey.contribs</groupId>+
+<artifactId>wadl-resourcedoc-doclet</artifactId>+
+<version>1.0.3.1</version>+
+</docletArtifact>+
+<docletArtifact>+
+<groupId>com.sun.jersey</groupId>+
+<artifactId>jersey-server</artifactId>+
+<version>1.0.3.1</version>+
+</docletArtifact>+
+<docletArtifact>+
+<groupId>xerces</groupId>+
+<artifactId>xercesImpl</artifactId>+
+<version>2.6.1</version>+
+</docletArtifact>+
+</docletArtifacts>+
+<additionalparam>-output+
+${project.build.outputDirectory}/resourcedoc.xml</additionalparam>+
+<useStandardDocletOptions>false</useStandardDocletOptions>+
+</configuration>+
+</plugin>+
+<plugin>+
+<groupId>com.sun.jersey.contribs</groupId>+
+<artifactId>maven-wadl-plugin</artifactId>+
+<version>1.0.3.1</version>+
+<executions>+
+<execution>+
+<id>generate</id>+
+<goals>+
+<goal>generate</goal>+
+</goals>+
+<phase>compile</phase>+
+</execution>+
+</executions>+
+<configuration>+
+<wadlFile>${project.build.outputDirectory}/application.wadl+
+</wadlFile>+
+<formatWadlFile>true</formatWadlFile>+
+<baseUri>http://192.168.2.149:8080/${project.build.finalName}+
+</baseUri>+
+<packagesResourceConfig>+
+<param> com.webserv.rest.resources</param>+
+</packagesResourceConfig>+
+<wadlGenerators>+
+<wadlGeneratorDescription>+
+<className>com.sun.jersey.server.wadl.generators.WadlGeneratorApplicationDoc+
+</className>+
+<properties>+
+<property>+
+<name>applicationDocsFile</name>+
+<value>${basedir}/src/main/doc/application-doc.xml</value>+
+</property>+
+</properties>+
+</wadlGeneratorDescription>+
+<wadlGeneratorDescription>+
+<className>com.sun.jersey.server.wadl.generators.WadlGeneratorGrammarsSupport+
+</className>+
+<properties>+
+<property>+
+<name>grammarsFile</name>+
+<value>${basedir}/src/main/doc/application-grammars.xml</value>+
+</property>+
+</properties>+
+</wadlGeneratorDescription>+
+<wadlGeneratorDescription>+
+<className>com.sun.jersey.server.wadl.generators.resourcedoc.WadlGeneratorResourceDocSupport+
+</className>+
+<properties>+
+<property>+
+<name>resourceDocFile</name>+
+<value>${project.build.outputDirectory}/resourcedoc.xml</value>+
+</property>+
+</properties>+
+</wadlGeneratorDescription>+
+</wadlGenerators>+
+</configuration>+
+</plugin>+
+<plugin>+
+<groupId>org.codehaus.mojo</groupId>+
+<artifactId>exec-maven-plugin</artifactId>+
+<version>1.1</version>+
+<executions>+
+<execution>+
+<goals>+
+<goal>java</goal>+
+</goals>+
+</execution>+
+</executions>+
+<configuration>+
+<mainClass>com.sun.jersey.samples.generatewadl.Main</mainClass>+
+</configuration>+
+</plugin>+
+<plugin>+
+<groupId>org.apache.maven.plugins</groupId>+
+<artifactId>maven-compiler-plugin</artifactId>+
+<inherited>true</inherited>+
+<configuration>+
+<source>1.5</source>+
+<target>1.5</target>+
+
+
+</configuration>+
+</plugin>+
+<plugin>+
+<groupId>org.jvnet.jaxb2.maven2</groupId>+
+<artifactId>maven-jaxb2-plugin</artifactId>+
+<executions>+
+<execution>+
+<goals>+
+<goal>generate</goal>+
+</goals>+
+</execution>+
+</executions>+
+</plugin>+
+<plugin>+
+<groupId>org.apache.axis2</groupId>+
+<artifactId>axis2-wsdl2code-maven-plugin</artifactId>+
+<version>1.4.1</version>+
+<executions>+
+<execution>+
+<id>generate reco core</id>+
+<goals>+
+<goal>wsdl2code</goal>+
+</goals>+
+<configuration>+
+<packageName>com.webserv.rest.webapp</packageName>+
+<wsdlFile>src/main/java/com/webserv/wsdl/web.wsdl</wsdlFile>+
+<databindingName>adb</databindingName>+
+</configuration>+
+</execution>+
+</executions>+
+</plugin>+
+<plugin>+
+<groupId>com.sun.tools.xjc.maven2</groupId>+
+<artifactId>maven-jaxb-plugin</artifactId>+
+<version>1.1</version>+
+<executions>+
+<execution>+
+<goals>+
+<goal>generate</goal>+
+</goals>+
+</execution>+
+</executions>+
+<configuration>+
+<generatePackage>com.webserv.wsparameters</generatePackage>+
+<schemaDirectory>src/main/xsd</schemaDirectory> <includeSchemas>+
+<includeSchema>**/*.xsd</includeSchema> </includeSchemas>+
+<extension>true</extension>+
+<strict>false</strict>+
+<verbose>true</verbose>+
+</configuration>+
+</plugin>+
+</plugins>+
+</build>+
+<profiles>+
+<profile>+
+<id>jdk-1.5</id>+
+<activation>+
+<jdk>1.5</jdk>+
+</activation>+
+<dependencies>+
+<dependency>+
+<groupId>com.sun.xml.bind</groupId>+
+<artifactId>jaxb-impl</artifactId>+
+<version>2.1.10</version>+
+</dependency>+
+</dependencies>+
+<build>+
+<plugins>+
+<plugin>+
+<groupId>org.apache.maven.plugins</groupId>+
+<artifactId>maven-javadoc-plugin</artifactId>+
+<configuration>+
+<docletArtifacts>+
+<docletArtifact>+
+<groupId>com.sun.jersey.contribs</groupId>+
+<artifactId>maven-wadl-plugin</artifactId>+
+<version>1.0.3.1</version>+
+</docletArtifact>+
+<docletArtifact>+
+<groupId>com.sun.jersey.contribs</groupId>+
+<artifactId>wadl-resourcedoc-doclet</artifactId>+
+<version>1.0.3.1</version>+
+</docletArtifact>+
+<docletArtifact>+
+<groupId>com.sun.jersey</groupId>+
+<artifactId>jersey-server</artifactId>+
+<version>1.0.3.1</version>+
+</docletArtifact>+
+<docletArtifact>+
+<groupId>xerces</groupId>+
+<artifactId>xercesImpl</artifactId>+
+<version>2.6.1</version>+
+</docletArtifact>+
+<docletArtifact>+
+<groupId>javax.xml.bind</groupId>+
+<artifactId>jaxb-api</artifactId>+
+<version>2.1</version>+
+</docletArtifact>+
+<docletArtifact>+
+<groupId>javax.xml</groupId>+
+<artifactId>jaxb-impl</artifactId>+
+<version>2.1</version>+
+</docletArtifact>+
+<docletArtifact>+
+<groupId>javax.activation</groupId>+
+<artifactId>activation</artifactId>+
+<version>1.1</version>+
+</docletArtifact>+
+<docletArtifact>+
+<groupId>javax.xml.stream</groupId>+
+<artifactId>stax-api</artifactId>+
+<version>1.0</version>+
+</docletArtifact>+
+</docletArtifacts>+
+</configuration>+
+</plugin>+
+</plugins>+
+</build>+
+</profile>+
+<profile>+
+<id>xsltproc</id>+
+<activation>+
+<file>+
+<exists>../xsltproc_win32/xsltproc.exe</exists>+
+</file>+
+</activation>+
+<build>+
+<plugins>+
++
++
+<plugin>+
+<groupId>org.codehaus.mojo</groupId>+
+<artifactId>exec-maven-plugin</artifactId>+
+<version>1.1</version>+
+<executions>+
+<execution>+
+<id>copy-docs-to-builddir</id>+
+<goals>+
+<goal>exec</goal>+
+</goals>+
+<phase>compile</phase>+
+<configuration>+
+<executable>copy</executable>+
+<commandlineArgs>src\\main\\doc\\*.* target\\classes+
+</commandlineArgs>+
+</configuration>+
+</execution>+
+<execution>+
+<id>prepare-xsltproc</id>+
+<goals>+
+<goal>exec</goal>+
+</goals>+
+<phase>package</phase>+
+<configuration>+
+<executable>copy</executable>+
+<commandlineArgs>..\\audioid-rest-interface\\src\\main\\resources\\*.xsd+
target\\classes</commandlineArgs>
+</configuration>+
+</execution>+
+<execution>+
+<id>exec-xsltproc: target/application.html</id>+
+<goals>+
+<goal>exec</goal>+
+</goals>+
+<phase>package</phase>+
+<configuration>+
++
+<executable>../xsltproc_win32/xsltproc.exe</executable>+
+<commandlineArgs>-o target/application.html+
src/main/doc/wadl_documentation.xsl
target/classes/application.wadl</commandlineArgs>
+</configuration>+
+</execution>+
+</executions>+
+</plugin>+
+</plugins>+
+</build>+
+</profile>+
+</profiles>+
+<pluginRepositories>+
+<pluginRepository>+
+<id>maven2-repository.dev.java.net</id>+
+<name>Java.net Repository for Maven</name>+
+<url>http://download.java.net/maven/2/</url>+
+<layout>default</layout>+
+</pluginRepository>+
+<pluginRepository>+
+<id>maven-repository.dev.java.net</id>+
+<name>Java.net Maven 1 Repository (legacy)</name>+
+<url>http://download.java.net/maven/1</url>+
+<layout>legacy</layout>+
+</pluginRepository>+
+</pluginRepositories>+
+<repositories>+
+<repository>+
+<id>maven2-repository.dev.java.net</id>+
+<name>Java.net Repository for Maven</name>+
+<url>http://download.java.net/maven/2/</url>+
+<layout>default</layout>+
+</repository>+
+<repository>+
+<id>maven-repository.dev.java.net</id>+
+<name>Java.net Maven 1 Repository (legacy)</name>+
+<url>http://download.java.net/maven/1</url>+
+<layout>legacy</layout>+
+</repository>+
+<repository>+
+<id>glassfish-repository</id>+
+<name>Java.net Repository for Glassfish</name>+
+<url>http://download.java.net/maven/glassfish</url>+
+</repository>+
+</repositories>+
+</project>+
Can anyonr contribute?

Problem with Thread and InputStream

Hi,
I am having a problem with threads and InputStreams. I have a class which
extends Thread. I have created and started four instances of this class. But
only one instance finishes its' work. When I check the state of other three
threads their state remains Runnable.
What I want to do is to open four InputStreams which are running in four
threads, which reads from the same url.
This is what I have written in my thread class's run method,
public void run()
     URL url = new URL("http://localhost/test/myFile.exe");
URLConnection conn = url.openConnection();
InputStream istream = conn.getInputStream();
System.out.println("input stream taken");
If I close the input stream at the end of the run method, then other threads
also works fine. But I do not want to close it becuase I have to read data
from it later.
The file(myFile.exe) I am trying to read is about 35 MB in size.
When I try to read a file which is about 10 KB all the threads work well.
Plz teach me how to solve this problem.
I am using JDK 1.5 and Win XP home edition.
Thanks in advance,
Chamal.

I dunno if we should be doing such things as this code does, but it works fine for me. All threads get completed.
public class ThreadURL implements Runnable
    /* (non-Javadoc)
     * @see java.lang.Runnable#run()
    public void run()
        try
            URL url = new URL("http://localhost:7777/java/install/");
            URLConnection conn = url.openConnection();
            InputStream istream = conn.getInputStream();
            System.out.println("input stream taken by "+Thread.currentThread().getName());
            istream.close();
            System.out.println("input stream closed by "+Thread.currentThread().getName());
        catch (MalformedURLException e)
            System.out.println(e);
            //TODO Handle exception.
        catch (IOException e)
            System.out.println(e);
            //TODO Handle exception.
    public static void main(String[] args)
        ThreadURL u = new ThreadURL();
        Thread t = new Thread(u,"1");
        Thread t1 = new Thread(u,"2");
        Thread t2 = new Thread(u,"3");
        Thread t3 = new Thread(u,"4");
        t.start();
        t1.start();
        t2.start();
        t3.start();
}And this is the o/p i got
input stream taken by 2
input stream closed by 2
input stream taken by 4
input stream closed by 4
input stream taken by 3
input stream closed by 3
input stream taken by 1
input stream closed by 1
can u paste your whole code ?
ram.

Problem with date and timezone

Hello,
I am encountering a problem with the command new java.util.date() on a hpux 11 machine.
The "date" from command line returns:
Tue Oct 26 18:02:02 MEST 2004
And the date from java returns:
Tue Oct 26 17:02:02 GMT+01:00 2004
It is as if the JVM was running on another timezone than the machine. The only change we made is an upgrade from java 1.2.2.04 to 1.2.2.17. Our old java program running since 2000 hasn't changed nor the others environment files.
Does anyone has an explaination? Javadoc for jav.util.date does not speaks of timezone.
Thanks in advance,
Valere

I have tried, it is the same pb with java 1.4.
How to set the default timezone for a JVM?
Concerning the patch, we have several others worksations running well with 1.2.2.04 (except a small display bug that i wanted to correct by upgrading the JVM). To my knowledge, this patch is not installed on any of them.
Another way to investigate, it seems that the java version installed on the others stations refers to java 3D. What is it? It has a different architecture than standard jre, but java -version seems exactly the same (except the version number itself).
Mayday, mayday!

Please help! Strange problem with HTTPD.Conf and OC4J (I think)

Hi,
We have been trying to configure the 10g "infrastructure" Apache server/instance to work with our own authentication module, and as part of this, we need to configure a directory alias containing some of our JSPs. To do this, the only thing that we did was that we took the standard HTTPD.CONF file that got installed with the 10g AS installation, and added a small section at the end.
However, we are finding that if our addition to the HTTPD.CONF is included, instead of the JSPs in our aliased directory being processed, Apache seems to be just serving the JSPs as text pages :(..
If we remove the section at the end of the HTTPD.CONF, and point a browser to the unaliased path, the JSPs get processed correctly.
I was wondering if anyone here might take a look at our HTTPD.CONF below, and tell me if you can see something there that might be causing this behavior? The section that we added is at the very end. We think that the problem might be something like the "order" of the directives, etc. in the HTTPD.CONF file may be such that the alias is taking priority ahead of the OC4J, or something like that.
Thanks in advance, and apologies for the long message.
Jim
=====================================================
ServerType standalone
ServerRoot "/orad59/10gAS/infrastructure/Apache/Apache"
PidFile /orad59/10gAS/infrastructure/Apache/Apache/logs/httpd.pid
ScoreBoardFile /orad59/10gAS/infrastructure/Apache/Apache/logs/httpd.scoreboard
Timeout 300
KeepAlive On
MaxKeepAliveRequests 100
KeepAliveTimeout 15
MinSpareServers 5
MaxSpareServers 20
StartServers 5
MaxClients 150
MaxRequestsPerChild 0
LoadModule onsint_module libexec/mod_onsint.so
LoadModule mmap_static_module libexec/mod_mmap_static.so
LoadModule vhost_alias_module libexec/mod_vhost_alias.so
LoadModule env_module libexec/mod_env.so
LoadModule define_module libexec/mod_define.so
LoadModule config_log_module libexec/mod_log_config.so
LoadModule agent_log_module libexec/mod_log_agent.so
LoadModule referer_log_module libexec/mod_log_referer.so
LoadModule mime_magic_module libexec/mod_mime_magic.so
LoadModule mime_module libexec/mod_mime.so
LoadModule negotiation_module libexec/mod_negotiation.so
LoadModule status_module libexec/mod_status.so
LoadModule info_module libexec/mod_info.so
LoadModule includes_module libexec/mod_include.so
LoadModule autoindex_module libexec/mod_autoindex.so
LoadModule dir_module libexec/mod_dir.so
LoadModule cgi_module libexec/mod_cgi.so
LoadModule asis_module libexec/mod_asis.so
LoadModule imap_module libexec/mod_imap.so
LoadModule action_module libexec/mod_actions.so
LoadModule speling_module libexec/mod_speling.so
LoadModule userdir_module libexec/mod_userdir.so
LoadModule alias_module libexec/mod_alias.so
LoadModule access_module libexec/mod_access.so
LoadModule auth_module libexec/mod_auth.so
LoadModule anon_auth_module libexec/mod_auth_anon.so
LoadModule dbm_auth_module libexec/mod_auth_dbm.so
LoadModule digest_module libexec/mod_digest.so
LoadModule proxy_module libexec/libproxy.so
LoadModule cern_meta_module libexec/mod_cern_meta.so
LoadModule expires_module libexec/mod_expires.so
LoadModule headers_module libexec/mod_headers.so
LoadModule usertrack_module libexec/mod_usertrack.so
LoadModule unique_id_module libexec/mod_unique_id.so
LoadModule setenvif_module libexec/mod_setenvif.so
LoadModule perl_module libexec/libperl.so
LoadModule fastcgi_module libexec/mod_fastcgi.so
<IfDefine SSL>
LoadModule ossl_module libexec/mod_ossl.so
</IfDefine>
LoadModule wchandshake_module libexec/mod_wchandshake.so
ExtendedStatus On
Port 7777
Listen 7777
User oracle
Group dba
ServerAdmin [email protected]
ServerName ge1ssd04.test.com
DocumentRoot "/orad59/10gAS/infrastructure/Apache/Apache/htdocs"
<Directory />
Options FollowSymLinks MultiViews
AllowOverride None
</Directory>
<Directory "/orad59/10gAS/infrastructure/Apache/Apache/htdocs">
Options Indexes FollowSymLinks MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
<IfModule mod_userdir.c>
UserDir public_html
</IfModule>
<IfModule mod_dir.c>
DirectoryIndex index.html
</IfModule>
AccessFileName .htaccess
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>
UseCanonicalName On
<IfModule mod_mime.c>
TypesConfig /orad59/10gAS/infrastructure/Apache/Apache/conf/mime.types
AddEncoding x-compress Z
AddEncoding x-gzip gz tgz
AddLanguage ar .ar
AddLanguage da .dk .da
AddLanguage nl .nl
AddLanguage en .en
AddLanguage et .ee
AddLanguage fi .fi
AddLanguage fr .fr
AddLanguage de .de
AddLanguage el .el
AddLanguage es .es_ES .es
AddLanguage he .he .iw
AddLanguage hu .hu
AddCharset ISO-8859-8 .iso8859-8
AddLanguage it .it
AddLanguage ja .ja
AddCharset ISO-2022-JP .jis
AddLanguage ko .ko
AddLanguage kr .kr
AddCharset ISO-2022-KR .iso-kr
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddCharset ISO-8859-2 .iso-pl
AddLanguage pt .pt
AddLanguage pt-br .pt_BR .pt-br
AddLanguage ltz .lu
AddLanguage ca .ca
AddLanguage sk .sk
AddLanguage sv .sv
AddLanguage th .th
AddLanguage tr .tr
AddLanguage cz .cz .cs
AddLanguage ro .ro
AddLanguage ru .ru
AddLanguage zh-cn .zh_CN
AddLanguage zh-tw .zh_TW
AddCharset Big5 .Big5 .big5
AddCharset WINDOWS-1251 .cp-1251
AddCharset CP866 .cp866
AddCharset ISO-8859-5 .iso-ru
AddCharset KOI8-R .koi8-r
AddCharset UCS-2 .ucs2
AddCharset UCS-4 .ucs4
AddCharset UTF-8 .utf8
<IfModule mod_negotiation.c>
LanguagePriority ar en da nl et fi fr de el it ja ko kr no pl pt pt-br ro ru ltz ca es sk sv th tr zh-cn zh-tw zh-cn
</IfModule>
AddType application/x-tar .tgz
</IfModule>
DefaultType text/plain
<IfModule mod_mime_magic.c>
MIMEMagicFile /orad59/10gAS/infrastructure/Apache/Apache/conf/magic
</IfModule>
HostnameLookups Off
ErrorLog "|/orad59/10gAS/infrastructure/Apache/Apache/bin/rotatelogs /orad59/10gAS/infrastructure/Apache/Apache/logs/error_log 43200"
LogLevel warn
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
CustomLog "|/orad59/10gAS/infrastructure/Apache/Apache/bin/rotatelogs /orad59/10gAS/infrastructure/Apache/Apache/logs/access_log 43200" common
ServerSignature On
<IfModule mod_alias.c>
Alias /icons/ "/orad59/10gAS/infrastructure/Apache/Apache/icons/"
Alias /jservdocs/ "/orad59/10gAS/infrastructure/Apache/Jserv/docs/"
Alias /javacachedocs/ "/orad59/10gAS/infrastructure/javacache/javadoc/"
<IfModule mod_perl.c>
Alias /perl/ "/orad59/10gAS/infrastructure/Apache/Apache/cgi-bin/"
</IfModule>
<Directory "/orad59/10gAS/infrastructure/Apache/Apache/icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
ScriptAlias /cgi-bin/ "/orad59/10gAS/infrastructure/Apache/Apache/cgi-bin/"
<Directory "/orad59/10gAS/infrastructure/Apache/Apache/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
</IfModule>
<IfModule mod_autoindex.c>
IndexOptions FancyIndexing
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
ReadmeName README
HeaderName HEADER
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
</IfModule>
<IfModule mod_setenvif.c>
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
</IfModule>
<Location /server-status>
SetHandler server-status
Order deny,allow
Deny from all
Allow from localhost ge1ssd04.test.com ge1ssd04
</Location>
SetEnv PERL5LIB "/orad59/10gAS/infrastructure/perl/lib/5.6.1:/orad59/10gAS/infrastructure/perl/lib/site_perl/5.6.1"
<IfModule mod_perl.c>
PerlModule Apache
PerlModule Apache::Registry
<Location /perl>
SetHandler perl-script
PerlHandler Apache::Registry
AddHandler perl-script .pl
Options +ExecCGI
PerlSendHeader On
</Location>
</IfModule>
<DirectoryMatch /WEB-INF/>
Order deny,allow
Deny from all
</DirectoryMatch>
<IfModule mod_fastcgi.c>
Alias /fastcgi/ "/orad59/10gAS/infrastructure/Apache/fastcgi/"
ScriptAlias /fcgi-bin/ "/orad59/10gAS/infrastructure/Apache/Apache/fcgi-bin/"
<Directory "/orad59/10gAS/infrastructure/Apache/Apache/fcgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
SetHandler fastcgi-script
<IfModule mod_ossl.c>
SSLOptions +StdEnvVars
</IfModule>
</Directory>
</IfModule>
PassEnv ORACLE_HOME
PassEnv LD_LIBRARY_PATH
PassEnv NLS_LANG
PassEnv TNS_ADMIN
<IfModule mod_oprocmgr.c>
<Location /oprocmgr-service>
SetHandler oprocmgr-service
Order deny,allow
Deny from all
Allow from localhost ge1ssd04.test.com ge1ssd04
</Location>
<Location /oprocmgr-status>
SetHandler oprocmgr-status
Order deny,allow
Deny from all
Allow from localhost ge1ssd04.test.com ge1ssd04
</Location>
</IfModule>
include "/orad59/10gAS/infrastructure/Apache/Apache/conf/mod_oc4j.conf"
include "/orad59/10gAS/infrastructure/Apache/Apache/conf/dms.conf"
LoadModule rewrite_module libexec/mod_rewrite.so
include "/orad59/10gAS/infrastructure/Apache/Apache/conf/ssl.conf"
include "/orad59/10gAS/infrastructure/Apache/Apache/conf/mod_osso.conf"
include "/orad59/10gAS/infrastructure/Apache/Apache/conf/oracle_apache.conf"
# MY ADDITIONS TO HTTPD.CONF GO BELOW HERE....
LoadModule my_auth_module /opt/myagent/apache/lib/libmy_apache_agent_mod_ssl.so
AddModule my_apache_mod.c
<IfModule my_apache_mod.c>
MYAgentRoot /opt/myagent/apache
</IfModule>
<IfModule my_apache_mod.c>
<Location />
AuthType Basic
Require valid-user
AuthName MYAUTH
</Location>
</IfModule>
<IfModule my_apache_mod.c>
Alias /mydir/ "/orad59/10gAS/infrastructure/j2ee/OC4J_SECURITY/applications/sso/web/jsp/myagentdir/"
<Directory "/orad59/10gAS/infrastructure/j2ee/OC4J_SECURITY/applications/sso/web/jsp/myagentdir/">
AuthType Basic
Require valid-user
AuthName MYAUTH
</Directory>
</IfModule>

Hi,
I wanted to post what we found on this.
As indicated in my original msg, we had an Alias directory in the httpd.conf. However, after thinking about the problem a bit, I think that the Alias was not the right thing to do.
The Alias tells Apache to map a URL fragment to a FILESYSTEM location. Well, obviously, Apache only SERVES pages... it doesn't process JSPs.
We switched to using a Redirect directive instead of the Alias, and things worked a little better, but we've run into a bit of a problem with "Redirect looping", but that's a different story :)...
Jim

Problem with non-ASCII file name in content disposition header

Hi All,
I am facing some problems with the non-ASCII file name incase of content-disposition header. I read from the RFC 2183 that if the file name contains non-ASCII characters then the same should be encoded before sending to browser. I did the same but realized 2 problems:
1. The name of the file is truncated in case the file name is slightly long for e.g. ��j�b�g��.txt
2. Also when the same file is opened in notepad, the title is showing encoded name %E6%9C%80%E4%B8%8A%E4%BD%8D.....
Overall, I feel that the browser is not understanding or responding to the encoded header values.
Is there any solution to this problem? I am using Microsoft IE 6.0.
The code snippet is given below:
protected void doGet(HttpServletRequest req, HttpServletResponse resp) throws ServletException, IOException {
          String fileName = "��j�b�g��.txt";
          fileName = URLEncoder.encode(fileName, "UTF-8");
          resp.setCharacterEncoding("UTF-8");
          resp.setHeader("Content-Disposition", "attachment; filename=\"" + fileName + "\"");
          resp.setContentType("application/download-binary");
          String s = "This is inside txt file";
          resp.getOutputStream().write(s.getBytes("UTF-8"));
          return;
     }Any help or pointer would be highly appreciated.
Thanks and Regards,
Ashish

The MIME standards for non-ASCII filenames are not widely implemented.
Many mailers use an ad hoc method for encoding filenames. JavaMail
supports both methods, but you need to set properties, such as the
mail.mime.encodefilename property. See the JavaMail javadocs for
the javax.mail.internet package.

Having problem with IUser

Hi Everyone
I have made the login() method but i am facing the problem while making the resource context...Because in Resource Context it takes IUser of package
com.sapportals.portal.security.usermanagement.IUser but I have got IUser of package com.sap.security.api.IUser ...while type Casting it with below code it is giving ClassCAstException.......
public class NewSimpleServlet extends HttpServlet {
protected void doGet(
HttpServletRequest request,
HttpServletResponse response)
throws ServletException, IOException {
StringBuffer s = new StringBuffer();
try {String j_user="epuser";
String j_password="Abcd1234";
request.setAttribute("j_user", j_user);
request.setAttribute("j_password", j_password);
javax.security.auth.Subject subject;
Set principals = UMFactory.getLogonAuthenticator().logon(request, response, "uidpwdlogon").getPrincipals();
i have problem with getting IUser object from set of principals. In javadoc is written: "In order to get an IUser object from this subject, call Subject.getPrincipals() and iterate through the returned Set of principals." so i tried to iterate but i was not able to get that IUser with any casting. Do u know how it should be?
IUser serviceUser = (IUser)subject.getPrincipals().iterator().next();
Now in resource Context
ResourceContext c = new ResourceContext(User);
Here resource context need IUser type object as parameter...
I also tried st like this
loggedUser = UMFactory.getAuthenticator().getLoggedInUser(request, response);
but loggedUser is not authenticated.
Can Anyone Help me Out...
Thanks
Rupesh Khemka

posted two times

Problems with non-ASCII characters on Linux Unit Test Import

I found a problem with non-ASCII characters in the Unit Test Import for Linux. This problem does not appear in the Unit Test Import for Windows.
I have attached a Unit Test export called PROC1.XML It tests a procedure that is included in another attachment called PROC1.txt. The unit test includes 2 implementations. Both implementations pass non-ASCII characters to the procedure and return them unchanged.
In Linux, the unit test import will change the non-ASCII characters in the XML file to xFFFD. If I copy/paste the the non-ASCII characters into the Unit Test after the import, they will be stored and executed correctly.
Amazon Ubuntu 3.13.0-45-generic / lubuntu-core
Oracle 11g Express Edition - AL32UTF8
SQL*Developer 4.0.3.16 Build MAIN-16.84
Java(TM) SE Runtime Environment (build 1.7.0_76-b13)
Java HotSpot(TM) 64-Bit Server VM (build 24.76-b04, mixed mode)
In Windows, the unit test will import the non-ASCII characters unchanged from the XML file.
Windows 7 Home Premium, Service Pack 1
Oracle 11g Express Edition - AL32UTF8
SQL*Developer 4.0.3.16 Build MAIN-16.84
Java(TM) SE Runtime Environment (build 1.8.0_31-b13)
Java HotSpot(TM) 64-Bit Server VM (build 25.31-b07, mixed mode)
If SQL*Developer is coded the same between Windows and Linux, The JVM must be causing the problem.

Set the System property "mail.mime.decodeparameters" to "true" to enable the RFC 2231 support.
See the javadocs for the javax.mail.internet package for the list of properties.
Yes, the FAQ entry should contain those details as well.

RegEx Problem with flag COMMENTS

Hello,
I have the following Exception:
java.util.regex.PatternSyntaxException: Unclosed group near index 9
when my program is running with this flags:
Pattern patt = Pattern.compile("^(@#@.+)$", Pattern.MULTILINE | Pattern.COMMENTS);but when I run this:
Pattern patt = Pattern.compile("^(@#@.+)$", Pattern.MULTILINE);it works fine.
Any COMMENTS ;-) for this problem? The entire RegEx is much bigger. I want to comment it.
Thanks sacrofano

Hi,
thanks for your help, but it did not work.I did not suggest anything that would work! I was trying to point out that the Javadoc says that everything from # to the end of the pattern is treated as comment.
I run this
Pattern patt =
Pattern.compile("^(?:(@#@.+))$",(Pattern.COMMENTS));[/
code]So why, based on reading the Javadoc, would you expect this RE to compile? Everything after the # is treated as comment so your effective regular expression is "^(?:(@" which is obviously an invalid RE!
with same exception as above.
Is there a problem with the Flag Pattern.COMMENTSNo! RTFD.

Problem with the JFileChooser

Hello all,
I'm having a small problem with the JFileChooser, the thing is whenever I click the cancel button in the dialog box a NullPointerException is thrown, so does anyone know wut is wrong?

Either way, it's an extremely important skill to learn to read the API and become familiar with the tools you will use to program Java. Java has an extensive set of documentation that you can even download for your convenience. These "javadocs" are indexed and categorized so you can quickly look up any class or method. Take the time to consult this resource whenever you have a question - you'll find they typically contain very detailed descriptions and possibly some code examples.
Java� API Specifications
Java� 1.5 JDK Javadocs
Best of luck!
~

Problem with javadoc

Similar Messages

Maybe you are looking for