Problem with javascript/PHP/ oracle 10g smart quotes

I have a problem with my php form that passes the text field to a javascript object. When I copy text from MS Word that includes smart quotes, the form inputs that into the database as ? (upside down) marks. The charset of the DB is WE8MSWIN1252. How do I store these smart quotes as regular quotes? And also if I can do any conversions on the front end (js or php). I tried doing some conversion but to no avail. Any help would be appreciated thank you. “double”

Decide if you want your HTML pages in Windows code page 1252 or Unicode UTF-8. Then, make sure the pages are properly tagged as either "text/html;charset=windows-1252" or "text/html;charset=utf-8". Use HTTP header Content-type or the corresponding <META HTTP-EQUIV=...> tag. Then, set NLS_LANG environment variable for your PHP engine to either AMERICAN_AMERICA.WE8MSWIN1252 or to AMERICAN_AMERICA.AL32UTF8, depending on which encoding you selected for your HTML.
-- Sergiusz

Similar Messages

Problems with the installation Oracle 10g 10202 - Platform x86 - Sol 5.10

Hi,
I am trying to install Oracle 10g R10202 in plataform x86 Solaris 5.10. I did all the tasks of preinstallation, and when I execute runInstaller, the following error appears ==>
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.10. Actual 5.10
Passed
Checking Temp space: must be greater than 250 MB. Actual 7622 MB Passed
Checking swap space: must be greater than 500 MB. Actual 1761 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /opt/tmp/OraInstall2007-08-26_09-18-08PM. Please wait ...warning [../stage/Components/oracle.swd.jre/1.4.2.0.0/1/DataFiles/filegroup2.jar]: 1 extra byte at beginning or within zipfile
(attempting to process anyway)
file #0: bad zipfile offset (local header sig): 1
(attempting to re-compensate)
error: invalid compressed data to inflate /opt/tmp/OraInstall2007-08-26_09-18-08PM/jre/1.4.2/lib/sparc/libjvm.so
file #516: bad zipfile offset (local header sig): 23197903
(attempting to re-compensate)
Error in writing to directory /opt/tmp/OraInstall2007-08-26_09-18-08PM. Please ensure that this directory is writable and has atleast 69 MB of disk space. Installation cannot continue.
: Error 0
Obviously it is not a problem of space in the directory/tmp.
I have tried other options as ==>
*-Run runInstaller con el parameter ignoreSysPrereqs
*-Setting others variables of environment like, TMP =/opt/tmp
and TMPDIR =/opt/tmp.
But I don't fix the problem.
Someone has some idea of like solving this bug or problem?
Thanks in Advance.
Best Regards.
NSV

Error is on small caps but it is straight forward:
".. error: invalid compressed data to inflate ..."
Your oracle media is corrupt. Redownload it and verify the downloaded zip file.
~ Madrid

"Problem with links in Oracle 10g Express Edition Application Interface"

Hi.
Under Object_Interface>Browse>Procedure the "edit" and "compile" links are not working.Also I am unable to see my code when I click on one of the procedures. Kindly help me out.
Thanks & Regards
Sri

My laptop didn't start this morning. Can you help me out?
(Go to the Express Edition forum at Oracle Database Express Edition (XE) and give them some hints about what the problem is. )
At the very least you will need to tell people: operating system, browser, whether you have Firewall turned on, whether you are using anti0virus, whether yo have upgraded the Application Express interface.
You can volunteer that information, or you can wait until people ask for it, but you will need to provide that information. And if you force people to ask - it's quite likely they will get bored with your problem.

Problem with Javascript and opening a new page

Hi,
I'm developping a website with Java Server Faces.
I've a problem with JavaScript.
I have a table, and each row of that table, has a button, to display more information about that specific row. I want to display this information in a new window. For this I want to use JavaScript.
The new window, of course, needs some information of the other window, to show the right data.
The first time I click the 'more-information-button', it works perfectly, but from than on, he keeps showing the same information...
Here is my jsp-page of the first page (the one with the table):
<?xml version="1.0" encoding="UTF-8"?>
<jsp:root version="1.2" xmlns:f="http://java.sun.com/jsf/core" xmlns:h="http://java.sun.com/jsf/html" xmlns:jsp="http://java.sun.com/JSP/Page">
    <jsp:directive.page contentType="text/html;charset=UTF-8" pageEncoding="UTF-8"/>
    <f:view>
         <f:loadBundle basename="languages.MessageBundle" var="bundle"/>
        <html>
            <head>
                <meta content="no-cache" http-equiv="Cache-Control"/>
                <meta content="no-cache" http-equiv="Pragma"/>
                <title>- UCV-Period -</title>
                <link href="resources/stylesheet.css" rel="stylesheet" type="text/css"/>
            </head>
            <body style="-rave-layout: grid">
                    <h:dataTable binding="#{UcvPeriod.dataTable1}" headerClass="list-header" id="dataTable1" rowClasses="list-row-even,list-row-odd" rows="5"
                        style="left: 24px; top: 168px; position: absolute" value="#{UcvPeriod.dataTable1Model}" var="currentRow">
                        <h:column binding="#{UcvPeriod.column1}" id="column1">
                            <h:outputText binding="#{UcvPeriod.outputUcvPeriod}" id="outputUcvPeriod" value="#{currentRow['UCVPERIOD']}"/>
                            <f:facet name="header">
                                <h:outputText binding="#{UcvPeriod.outputText2}" id="outputText2" value="#{bundle.ucvPeriod_columnHeader_ucvPeriod}"/>
                            </f:facet>
                        </h:column>
                        <h:column binding="#{UcvPeriod.column11}" id="column11">
                            <h:commandButton action="#{UcvPeriod.btnDetails_action}" binding="#{UcvPeriod.btnDetails}" id="btnDetails" value="+" onclick="window.open('Details.jsp')"/>
                            <f:facet name="header">
                                <h:outputText binding="#{UcvPeriod.outputText21}" id="outputText21" value=""/>
                            </f:facet>
                        </h:column>
                    </h:dataTable>
                </h:form>
            </body>
        </html>
    </f:view>
</jsp:root>Here is my action, when someone clicks on the 'more-information-button':
public String bthnDetails_action() {
   Object s = outputUcvPeriod.getValue();
   BigDecimal ucvPeriod = (BigDecimal)outputUcvPeriod.getValue();
   this.getSessionBean().setUcvPeriod(new Integer(ucvPeriod.intValue());
   return "detail_ucvperiod";
}Here is my constructor of the Detailspage.
    public Details() {
         this.txtUcvPeriod.setValue(this.getSessionBean().getUcvPeriod());
    }Here is the navigation part for this part of my faces-config.xml .
<navigation-rule>
   <from-view-id>/UcvPeriod.jsp</from-view-id>
   <navigation-case>
       <from-outcome>detail_ucvperiod</from-outcome>
       <to-view-id>/UcvPeriod.jsp</to-view-id>
   </navigation-case>
</navigation-rule>Thx a lot....
Anneke

See the tutorial "Sharing Data Between Two Pages" at http://devservices.sun.com/premium/jscreator/standard/learning/tutorials/data_sharing_twopages.html and the FAQ "How can I pass data between pages without creating SessionBean variables in Creator?" at http://devservices.sun.com/premium/jscreator/standard/reference/faqs/technical/javasource/passing_data.html. Since you can open a new window when your button is clicked, the tutorial and FAQ will explain ways to pass your data to the new window.

Problem with JavaScript in URL iView

Hi,
I am facing a problem with javascript when i am trying to access my application through URL iView. In the javascript window.top is used to access the frames in the window. But the EP is not recognizing it as valid. what exctly the problem and please suggest me a solution.
Ashok.

Hi,,
thanks for the quick reply. But what i asked was different. I will put it in different way. I have deployed a application in Web Application Server and trying to access it through URL iView. My application is pure J2EE application with html,jsp and JS files. In javascript we used window.top property of the java script which is working fine MS IE. The problem is window.top is a IE specific property which is not having any equallent open standerd so EP is throwing a java script error. As I know the only possible solution for this problem is inherating IE rendaring capabilities to iView(i.e iFrame). is there any way to do that?
Ashok.

JSF problems with Javascript

Hi everyone!!
The situation is this: I have a datable with one of its columns make an h:commanLink, which has two f:params, its actionListener is a function of a ManagedBean. This is JSF, not MyFaces. In IE, When the link is pressed, it shows a javascript error: " 'elements.idVar' is null or it's not an object ", however in Firefox, it works perfectly. I have been looking for the problem and it have to do with this:
</form><a href="# onclick="clearFormHiddenParams_formResultado('formResultado');document.forms['formResultado'['formResultado:_idcl'].value='formResultado:dtTablaResultados:0:_id10';document.forms['formResultado']['idVar'].value='37';document.forms['formResultado']['idMun'].value='168'; document.forms['formResultado'].submit(); return false;"><span id="formResultado:dtTablaResultados:0:itColumna3" title="AREA COSECHADA EN CULTIVOS PERMANENTES">1,230</span></a></td>
</tr>
<tr class="standardTable_Row2">
<td><span id="formResultado:dtTablaResultados:1:itColumna1" style="text-align:center;" title="Código Municipio">718</span></td>
<td><a href="javascript:void(0)" onclick="javascript:window.opener.opener.showLink('SASAIMA')"><span id="formResultado:dtTablaResultados:1:itColumna2_l" title="Municipio">SASAIMA</span></a></td>
<td><form id="formResultado:dtTablaResultados:1:_id9" method="post" action="/ConsultaEstadisticasGeo/resultadoConsulta.jsf" enctype="application/x-www-form-urlencoded">
<input type="hidden" name="com.sun.faces.VIEW" id="com.sun.faces.VIEW" value="_id39:_id41" /><input type="hidden" name="formResultado:dtTablaResultados:1:_id9" value="formResultado:dtTablaResultados:1:_id9" /><input type="hidden" name="idVar" /><input type="hidden" name="idMun" /><input type="hidden" name="formResultado:_idcl" />
<script type="text/javascript">

</script>
the way JSF manage the params. The error, acdording to the message shonw by IE is in this line: curForm.elements['idVar'].value = null;
The code of the JSP is this:
<h:commandLink     actionListener="#{consultaEstadisticasMB.detalleEstadistica}">
     <f:param name="idVar" value="#{consultaEstadisticasMB.idColumna3}" id="idVar" />
     <f:param name="idMun" value="#{registro[0]}" id="idMun" />
     <h:outputText title="#{consultaEstadisticasMB.columna3}" id="itColumna3" value="#{registro[2]}" />
</h:commandLink>
Waht can i do? (Not using MyFaces, because I can�t do that)
Thanks for your answers!!

I have run into this same problem with javascript and the colon. I am not sure if the colon is a valid character for a javascript identifier (one would think the RI developers would have checked it out though!?!).
Anyway, my workaround is to search through the Javascript DOM for the widget you want to obtain a reference to, using part of its id. After all, you know its id, you just can't use it as a javascript reference. In your Javascript code, do something like:
    var inputWidgets = document.getElementsByTagName("input");
    var targetInput;
    for(var i = 0; i < inputWidgets.length; i++)
       var inputId = inputWidgets.id;
if(inputId.indexOf("yourInputId") != -1)
targetInput = inputWidgets[i];
break;
It's a lot of effort to just get a reference to a form widget....but it works (I pasted in the code and changed it a bit, so it might not work as is, but at least it demonstrates the idea).

Installing Discoverer with Database Version Oracle 10g Express Edition

Hello,
Is it possilbe to install Discoverer with database version Oracle 10g Express Edition? I have Oracle Fusion Middleware 11.1.1.1.0 on my Windows XP machine as well. If so, can someone please provide me a link to the Discoverer download.
Regards,
Kelly

Note that the Personal Edition of the database is 'the most powerful' version, in that it contains all features and options of the Enterprise Edition (expect RAC and Enterprise Manager packs)
As such, the Personal Edition, at a mere USD$400-500 is one of the most cost effective for-fee products that Oracle has in it's inventory. It is targeted at the developer. And it comes with the complete set of Sample Data, whereas XE has a very limited subset (since it does not support all functionality).
Express Edition is indeed free, but it is not supported, and can not be patched. OTOH it does have a lighter footprint.
Again, I am not sure whether Disco 11g is compatible with Express Edition. (It's on my schedule for December ...)

Webcontrol problems with javascript

Hello,
the page I want to navigate making me problems in my webcontrol. The same page works fine if I go there manually with the Internet Explorer. I force webcontrol to use another IE version than default. I changed regedit >
HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_BROWSER_EMULATION
and a new key for my application with value 2af8(11000)
If I do not force this version the used version in the webcontrol seems to be to old.
I think that my application does not use the settings of my IE because if I use IE manually it works.
I used Google and I can not find a property to force the webcontrol to activate javascript - it seems that I have to change this by the "global" settings.
Edit: I do not exactly know if its javascript. The error is a script error.
It does not help to suppress this errors - the page is not working correctly

Hello,
in the meantime I tried GeckoFX to solve the issue, but I get another problem later so I come back to the native webcontrol. To get help I will translate the error message because I can not attach a screenshot
"Scripterror
URL: http://www.transerv2000.de/DesktopModules/SNITNET_Metrix/js/rma_main.js
Do you want to continue? Yes / No"
Because I see the .js I think that this is an issue because of javascript.
If I navigate to this site and do some work I have no problems. This is why I think that the used IE in my webcontrol is having other settings?!
Please help and thanks alot.
Edit: If I supress javascript errors, I got not Messagebox but the content dont work - so I really think that it is a problem with javascript. As I said, if I use the IE as application the page works fine.

Problem with implicitly created Oracle pipes

Hi, I am having a problem with implicitly created Oracle pipes. I am not sure if this is the correct forum for this topic, but I could not see one which suited better..
I am using Oracle pipes as a commiunication mechanism between processes (some are written in PL/SQL and other in PRO*C).
The general problem I have is that if a timeout occurs during the communication process, I end up with 1 or perhaps 2 implicitly created pipes.
The biggest problem for me is that I am unable to determine if a create is implicitly created (via dbms_pipe.send_message or receive_message). This causes problems, since these implicitly created pipes are left behind and not deleted. I'll show you the basic flow of the processes and you shall see my problem.
server: create request pipe "req_pipe"
server: listen for request on requests pipe.
client: create two pipes for comms with server.
client: send request and the names of the newly created pipes to the server.
server: read request and pipename from request pipe (from this point all comms between the client and server are now done over the 2 pipes the client created).
server: send ack message to client to ensure they are still there (since requests can be queued in the request pipe and clients could have timed out before the request is received)
client: send "i'm still here" ack back to the server.
server: process request and send result back to client.
client: send ack back to server to let server know we have received the response.
server: send ack back to client to show that work is now committed.
OK thats the general event flow. I use the rule, that pipes created by a process are removed by a process. So the client always removes the pipes it created in all situations. But since this can happen at any point we can get in the situation:
client: timeout occurs, delete pipes.
server: send message to client (creates an implicit pipe) and therefor works (no errors raised)
server: do a read for response from previous message. (implicitly creates pipe) (will fail).
Now we have two implicitly created pipes! These pipes will exist until the database instance is shutdown, and in a poorly performing environment, we could get thousands of these pipes lying around... not a good situation.
How can I either stop pipes being implicilty created, or how do I detect if a pipe was implicitly created.
I have tried a couple of things, like using v$db_pipes to check if a pipe exists before doing send/reveive calls but this is FAR to slow to do a select on that view.
We have also looked at keeping a record of pipes created by the client then have some process (perhaps the server) clean up these pipes after some time frame. This is a workable solution but is not favourable since it adds extra overhead having to check these pipes often, and created an extra level of complexity which is not required..
Any suggestions will be greatly appreciated.
Feel free to email me with any suggestions on my email provided below, or just post a reply to this formum..
Many thanks,
Karl Bridger
[email protected]

I solved the problem by changing the SOAP massage format from Document/Wrapped to Document/Literal

I'm having problems with iPad 2 and my smart cover. The attachment seems to be depolarized and it moves around causing the device to toggle and flash like its coming on or shorting. Anyone having problems?

I'm having problems with iPad 2 and my smart cover. The attachment seems to be depolarized, trys to connect using the back (curved) edge of the magnetized bracket. When I try to attach it, it moves around causing the device to toggle in a way that looks like the camera flash. Anyone having problems? Help.

Update. My carrier says the antenna of my iPhone 4s is not so good as the one in the iPhone 3G. They can't solve the problem. Their signal is too weak for the 4s at places I spend most of my time. Not the answer I expected, but I'm free to choose an other carrier. Hope this will help.
This was not the correct answer, I accidentially clicked the button..
Message was edited by: vasch

Problems with Download of Oracle IFS /IFS Devkit for NT

I am having problems with download of Oracle IFS and Oracle IFS Devkit for NT.
When I ran the ifsdevkit.bat file the last four files did not get copied over. Subsequently when I ran the upload_ifsdevkit batch file as indicated in document I got error message saying
'System cannot find the path specified'.
When I opened the batch file it is looking for BIN directory under the C:\OraHome1\ifs directory but none exists. I wonder if this is the cause of problem. This would mean that the ifs1081.zip file has a bug in that it did not create the BIN directory and files under C:\OraHome1\ifs
Would appreciate if somebody can help. Thanks
null

Is C:\OraHome1 your ORACLE_HOME directory? (Usually, it's C:\Oracle\Ora81)
Also, have you installed iFS (successfully) in that ORACLE_HOME? If so, you are guaranteed to have an %ORACLE_HOME%\ifs\bin directory.
Finally, did you enter the correct directory as the parameter to the DEVKIT script?

How can I send e-mail with attachment from oracle 10g?

How can I send email with attachment from oracle 10g?

hi you can achieve the same thing from database tier of unix.

Need Urgent Help with trigger in Oracle 10g

Hello frd,
I am working on my DBMS Project in VB 6.0 that is Tollbooth management system
i have to insert one trigger for my project so i had decided to insert time trigger.
I have total 3 table UserLogin, Vehice and Vehicle_Data
the 3rd table Vehicle data contain the following fields
Vehicle_Type, Vehicle_No, Tax_Time, Source, Destination and Tax
Now i had done coding for tax when you select Vehicle Type, Source and Destination the Tax Field will automatically fillup and all the data will Saved in Oracle table but now my problem is that i want to create trigger for Tax_Time column When any new data inserted current time will stored in that column
I had create one but it gives error
create trigger time after insert on vehicle_Data
for each row
begin
insert into Vehicle_Data(Tax_Time) values(to_char(sysdate, 'HH:MI:SSAM DD_MON_YYYY'));
end;
Note: I am Using VB 6.0 and Oracle 10g Express Edition

I had create one but it gives errorWelcome to the forum and many many thanks for not posting the full error message, that is really helpful, since we're all a 100% sure what's going on now (yes, that was ironic ;) ).
Let me guess: a mutating table error?
Read:
http://www.oracle-base.com/articles/9i/MutatingTableExceptions.php
http://asktom.oracle.com/pls/asktom/ASKTOM.download_file?p_file=6551198119097816936
But before that, actually you should read:
http://tkyte.blogspot.com/2005/06/how-to-ask-questions.html

Problem to connect between Oracle 10g xe and VB2010 at Vista sp2

Introduction
Hi guys, good day... NEED RESCUE!! SOS!! Hmm.. i have trouble been 1 weeks trying connect between Oracle 10g xe and VB2010 on window vista sp2. Actaully im very new at Oracle 10g xe and VB2010 but i got a project is going to build up system database and i figure out Oracle 10g xe and VB2010 can use free so i just chows these appication to be my project. I been search around internet and there is several things i was found about the connection but i has try and tried still it wont work out.
Things i found and learned
Oracle
1. I have download Oracle 10g XE and installed in my windows vista sp2.
2. I notice the Oracle Developer Tools is needed for VB2010 (To add reference 'Oracle.DataAccess'). So i was downloaded ODT11beta and installed
3. I also edit TNSNAMES to following below:
OraDb =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = shin-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
4. My sqlnet like following below:
SQLNET.AUTHENTICATION_SERVICES = (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
5.I have try tnsping OraDB and its works.
6. I monitoring task manager and OracleServicesXE is running.
7. ora_dba is added in Group.
Problem in SQLPLUS
When i try connect SQLPLUS in cmd i get ERROR: ORA-12560: TNS:protocol adapter error.
i . In cmd i type sqlplus and enter then i been ask for username and password.
ii. After i insert my username and password and enter then i get the error of ORA-12560.
Visual Basic 2010
1. First i created my project, drawing label and button for test connection.
2. Then, i add reference Oracle.DataAccess into my project.
3. I type following script into my vb form:
Imports System.Data
Imports Oracle.DataAccess.Client
Imports Oracle.DataAccess.Types
Public Class Logon
Private Sub cmdLogon_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdLogon.Click
Dim oradb As String = "Data Source = OraDb; User Id = system; Password = shin;"
Dim conn As New OracleConnection(oradb)
conn.Open()
Dim cmd As New OracleCommand
cmd.Connection = conn
cmd.CommandText = "select SName from Staff where SName = shin"
cmd.CommandType = CommandType.Text
Dim dr As OracleDataReader = cmd.ExecuteReader()
dr.Read()
lblOra.Text = dr.Item("SName")
conn.Dispose()
End Sub
End Class
Problem in VB2010
When i run my project and press the button i get error message ORA-12514: TNS:could not resolve the connect identifier specified at conn.Open()
Extra Question*
1. Im notice in my netbook xp home sp2, before i install ODT11beta my sqlplus look fine thought cmd but after i installed ODT11beta its same problem with my Vista sp2 now. Get error ORA-12560: TNS:protocol adapter error :( I tried uninstall ODT11beta again and restart its work fine again. Which i really dun understand. Izzit the version ODT11 is not suitable for 10g xe? And i dunno this problem is related with my connection between oracle 10g xe and vb2010 or not. So confuse@@
2. I wish to know more about connect between Oracle and VB, is there still a things i miss?(I mean steps or configuration that should i done)
3. Or i just lower my VB version could make more easy? If yes, what version VB should i use that could work out with oracle 10g xe?
4. Sorry for too bad my english but i really wish somebody could help me. Please try to understand my written or you could ask me mean if dont understand. Im stuck!! Stuck feel not really that good.....
Edited by: user9173084 on Jul 19, 2010 3:34 AM

Huhu..
Yo, henry
I thought the OraDb is just a name for entry but im not sure it is a service. I was refer http://www.oracle.com/technology/pub/articles/cook-vs08.html at topic Connection Strings and Objects.
Here is my lsnrctl service
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOW has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOW has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "XEXDB" has 1 instance(s).
Instance "xe", status READY has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 state:ready
DISPATCHER <machine: SHIN-PC, pid: 1932>
(ADDRESS=(PROTOCOL=tcp)(HOST=shin-pc)(PORT=49158))
Service "XE_XPT" has 1 instance(s).
Instance "xe", status READY has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
Service "xe" has 1 instance(s).
Instance "xe", status READY has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
The command completed successfully
Izzit ok? I notice there is no listed OraDb. but tnsping OraDb seem fine.
Actually there is somethings as a newbie i wondering long time alreadly ><
1. The origin of tnsname.ora is no OraDb or ORCL but i just simple add it by open tnsname.ora with notepad. Im just not sure it is function or not.
Also please check at my TNSNAME.ORA:
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = shin-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
OraDb =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = shin-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
I got the feeling there is so close~~~!!!

Problems with Apache PHP Mysql

I tried doing an upgrade from Tiger to Leopard server but was having lots of issues while working with the virtual sites I have hosted. I tried a clean install and I was still unable to get Apache php and mysql to work together. Each service was starting fine but when I would try to run a php file it would only display a white page. Under the upgrade instead of displaying the page it was downloading any page I tried to load.
In the new clean install I enabled phplib5 through server admin but even a simple info.php file with <?php phpinfo(); ?> was only giving me a white page. I dont know if mysql was interfacing with php and apache at this point cause I could not get any further. I mainly just want to be able to run wordpress which is a php blog that uses a mysql database.
I have heard some people talking about mamp installs and not using the stock web services but I did not know if that would be a smart route to take.

well the problem come in that you could end out with multiple releases of the same application when the idea is to make one package "stable"
would you rather have a debain package data base that has seventeen apache's or one stable full featured apache?
as for a server/stable tree for production machines this is coming. implimentation is not the trouble it is time that is a factor.

Problem with javascript/PHP/ oracle 10g smart quotes

Similar Messages

Maybe you are looking for