Problem with JBL On Time system
I purchased a JBL On Time player - very cool looking - but there is a major flaw. When the alarm goes off, it automatically plays the first song in the library every time, even though it is supposed to play the song the iPod was playing last.
JBL's answer? Following is the ridiculous answer from JBL tech support:
"Good morning and thank you for your inquiry. The issue is a software bug
with the iPods. The JBL On Time will default to the first song in the
library if you have the following iPods with the following software:
iPod Nano - software 1.1 - current
iPod Video - software 1.1 - current
The current fix is to downgrade the software to 1.0 (iPod Updater
2005-11-17). This download enables you to select any song to wake up to.
Please note, downgrading the software will not work with the new iPod
80gb Video or the 2nd generation iPod Nano."
Can you believe it?!? Yeah right, like I'm going back to the stone age with my iPod software.
To me, JBL needs to work with Apple to resolve this problem with future releases of the software, not make "valuable" customers back date...
If you too are an owner of the On Time product, I hope this helps. Please send their support an email letting them know how unsatisfied you are with their product support. Perhaps if they hear from enough of us, they will change there archaic ways...
If you are thinking about buying one, perhaps you should wait for JBL to become more responsible for their own customers' satisfaction...
Cheers.
iPod touches do not operate correctly with a number of earlier iPod accessories. You can look for an adapter to get it to work but other than that, there are not many solutions.
Similar Messages
-
HP Officejet Pro 8600 "Problem with Printer or Ink System'
A gander at this forum suggests I am one ofa multitude of people perplexed by this issue. There is a notation beside one enquiry which says 'Problem Solved'.... well it isn't for me. My printer (typical!) is one month out of warranty. I had to replace the black cartridge and, when I did, it came up with this error prompt. I then replaced all the other cartridges. HP suggests removing the printhead and following that they say place it 'upside down on a clean sheet of paper'... NO instructions for cleaning it!! When it is replaced in the printer they suggest you 'rock the printhead left and right to make sure that the printhead fully seats in the carriage' and if THIS doesn't fix things 'try reseating the printhead up to 3 times'... This in itself is an admission of an 'issue' with this product. It doesn't sound like a very scientific engineering 'fix' to me!
A new printhead costs almost what we paid for the printer a year ago. I hate consigning anything to landfill that I can avoid... unfortunately it looks like that is where this unit belongs...Hi @Robin_Perth,
Welcome to the HP Forums!
I am sorry to hear about you getting the problem with printer or ink system error, with your HP Officejet 8600, but I am happy to look into this for you!
I am assuming you have already been through this guide, A 'Problem with Ink System' Error Message Displays on the Control Panel or Computer During Setup.
If this guide does not resolve the issue, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
This guide, Limited Warranty for HP Ink Cartridges and Customer-Replaceable Printheads for HP Inkjet Supplies, will help you to determine if your printhead is still in warranty or not.
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping! -
Has anyone else had problems with long wakeup times on Cinema displays?
We're having problems with long wakeup times on our Cinema Display. Noticed it after the Maverick update.
Need help please. This thing is nothing more than a boat anchor to my developers... frustrating, expensive boat anchor.
Thoughts?
Thanks,
Jeff StutzmanHey Jeff,
Thanks for the question. I understand you are experiencing issues with an external display and your MacBook Air. The following resource may provide a solution:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
While you should give all of the troubleshooting steps a whirl, definitely make sure to follow the steps in this section:
Reset the system
You can reset the Mac's parameter RAM and SMC.
Thanks,
Matt M. -
Problem with correlation on QA systems
Hi all
i need help!!!
I have a problem with correlation on QA systems!!!!
I have exported file (SCVW and CS) from DEV system and imported into QAL system!
I ve changed the parameters of CCs!!
But messages on sxi_moni doesn't meet correlation!!!!
The same interface on DEV system work fine, everything it's ok!!!
Everyone can help me? What could be the problem?
Tnx allHi Prateek
Scheduled Background Job for Event Queue has a red flag in QA, while all flags are green on Dev!!!
What I sholud do? -
HP 4622 All in One Printer: Problem with Printer or Ink System
Problem with Printer or Ink System Error OXC19a0027.
charleshia wrote:
Thanks so much for replying to my post. I tried the fist suggestions and they did not work. So, I attempted to move on Dow to the cleaning of my printer. I am the the first to admit that I'm not the genius when it come to electronics buys, my printer do not seem to have what is described in the photos. I'd like to upload a photo of my ink cartage but do not know how.
Charleshia, you can upload a photo here to reply. Click Reply, then on the window you'll see the image below..
click the one which has the red box, it's where you insert the photo
Going back on your issue.. the basic step would be.. take out the inks then close the door... what error message you got? If it's saying "Missing Ink Cartridge" just hit OK. Unplug the power cable at back of the printer, plug it back in.. Clean the copper contacts on the ink cartridges using a lint free cloth then reinstall them. Let me know if it resolved it or not.. I can only give basic troubleshooting here -
HT1222 Having problem with Notes at time will not record dictation on iPhone?
Having problem with Notes at time will not record dictation on iPhone?
First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
If that doesn't help have your phone examined by an apple technician. Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support. -
"Problem with printer or ink system"
Hello, so this morning I printed out a paper and I saw I was almost out of black ink. I replaced the cartridge and everything was okay. When I went to print out another paper I received the error message "Problem with printer or ink system... 0x6100004e" I went to HP support and found a whole bunch of solutions. I went through the first few, there is no paper jams, but then I realized my carriage was either not leaving the dock or it would come all the way left just to go right back. When I open the door, its like the printer thinks the carriage is moving because it keeps turning the way it normally would. I tried resetting it, and looking up other solutions but nothing. My warranty was up in May. It had never had this problem when I changed the cartridges before, so I really need all the help I can get.
Hi andre2015,
Please perform the steps from the link below and this will resolve the issue.
http://support.hp.com/us-en/document/c03253201
---- If my answer was helpful please click the Kudos star.
If your problem is solved please click the Accept as Solution button so other forum users can use the solution.
Regards
Aneesh -
I am not getting any sound input on my microphone. There is no microphone input on my new macbook pro, so I am using my old one. Is this a problem with the new operating system? Did they simply remove any microphone software?
Check System Preferences > Sound > Output
Make sure the correct device is selected. -
There is a problem with your airport time capsule disk
Hello,
Since I got my airport time capsule and set it up, I got an error "there is a problem with your airport time capsule disk" and disk is not listed for setup or erase. The LED is flashing amber sine I turned on the first time.
The wifi is working fine as well as the internet connectivity.
I got the device from the online store and was shipped to my address in the states but I opened the box the first time in Saudi Arabia as I left the states immediately after receiving it.
Any advise on fixing this or a near by apple support center where I can get it in for repair / replacement?Any advise on fixing this or a near by apple support center where I can get it in for repair / replacement?
I would first suggest that you perform a "factory default" reset on your Time Capsule (TC).
If that fails to remedy the problem, you can obtain technical support from Apple here. -
OneKey Recovery 6.0. Problem with back up operating system from recovery cd'ies
Hello, i have problem with back up operating system from recovery cdies.
When i acceped start button to backup partition system i get an alert "space not enough"
I had linux before and i whant change it to windows back. i deleted all ext partitions. I have all unlocated space.I shouldnt have problems.
Please help meI would use something like Partition Magic or Acronis Disk Director to first create a FAT32 partion for your C: Drive where your OS will go and be sure to leave 10GB or so unallocated for the secondary FAT32 Partition where your "factory image" will go.
You then create a Logical Drive with the unallocated space and make it hidden (PM or ADD will do this). Install your OS (preferably Windows XP if you want less problems) and then after you have setup everything the way you want (drivers, applications, etc), then use Acronis True Image to create your "factory restore" image on the hidden partition and activate the Startup Recovery Manager.
This is the way I do it and it works like a charm! -
Problem with boot / new install system ond SSD
Hi guys,
I have fresh installed system on my new SSD. I use my old HDD as external usb drive.
I have problem with boot when I dont have connected HDD to usb.
My system boot only to console no to KDE. When I connect external HDD to usb and reboot system, system boot normally.
Logs after boot.
Feb 26 16:46:39 arch systemd[1]: Reached target Login Prompts.
Feb 26 16:46:39 arch systemd[1]: Starting K Display Manager...
Feb 26 16:46:39 arch systemd[1]: Started K Display Manager.
Feb 26 16:46:39 arch systemd-logind[231]: New seat seat0.
Feb 26 16:46:39 arch systemd[1]: Started Login Service.
Feb 26 16:46:40 arch kernel: microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
Feb 26 16:46:40 arch kernel: platform microcode: Direct firmware load failed with error -2
Feb 26 16:46:40 arch kernel: platform microcode: Falling back to user helper
Feb 26 16:46:40 arch kernel: random: nonblocking pool is initialized
Feb 26 16:46:40 arch kernel: uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071)
Feb 26 16:46:40 arch laptop-mode[271]: enabled, not active
Feb 26 16:46:40 arch kernel: input: CNF7129 as /devices/pci0000:00/0000:00:1a.7/usb3/3-3/3-3:1.0/input/input16
Feb 26 16:46:40 arch kernel: usbcore: registered new interface driver uvcvideo
Feb 26 16:46:40 arch kernel: USB Video Class driver (1.1.1)
Feb 26 16:46:40 arch systemd[1]: Started Wicd a wireless and wired network manager for Linux.
Feb 26 16:46:40 arch systemd[1]: Starting Network.
Feb 26 16:46:40 arch systemd[1]: Reached target Network.
Feb 26 16:46:40 arch systemd[1]: Starting OpenSSH Daemon...
Feb 26 16:46:40 arch systemd[1]: Started OpenSSH Daemon.
Feb 26 16:46:40 arch systemd[1]: Starting NoMachine Server daemon...
Feb 26 16:46:40 arch sshd[373]: Server listening on 0.0.0.0 port 22.
Feb 26 16:46:40 arch sshd[373]: Server listening on :: port 22.
Feb 26 16:46:40 arch mtp-probe[404]: checking bus 7, device 2: "/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-2"
Feb 26 16:46:40 arch mtp-probe[404]: bus: 7, device: 2 was not an MTP device
Feb 26 16:46:40 arch kernel: hidraw: raw HID events driver (C) Jiri Kosina
Feb 26 16:46:40 arch kernel: usbcore: registered new interface driver usbhid
Feb 26 16:46:40 arch kernel: usbhid: USB HID core driver
Feb 26 16:46:40 arch systemd[1]: Starting Sound Card.
Feb 26 16:46:40 arch systemd[1]: Reached target Sound Card.
Feb 26 16:46:40 arch systemd-udevd[145]: renamed network interface eth0 to enp3s0
Feb 26 16:46:40 arch kernel: psmouse serio4: elantech: assuming hardware version 2 (with firmware version 0x040101)
Feb 26 16:46:40 arch kernel: psmouse serio4: elantech: Synaptics capabilities query result 0x7e, 0x13, 0x0d.
Feb 26 16:46:40 arch kernel: i915 0000:00:02.0: irq 45 for MSI/MSI-X
Feb 26 16:46:40 arch kernel: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
Feb 26 16:46:40 arch kernel: [drm] Driver supports precise vblank timestamp query.
Feb 26 16:46:40 arch kernel: vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
Feb 26 16:46:40 arch kernel: iTCO_vendor_support: vendor-support=0
Feb 26 16:46:40 arch kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
Feb 26 16:46:40 arch kernel: iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0860)
Feb 26 16:46:40 arch kernel: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Feb 26 16:46:40 arch kernel: input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input15
Feb 26 16:46:40 arch systemd-logind[231]: Watching system buttons on /dev/input/event2 (Lid Switch)
Feb 26 16:46:40 arch systemd-logind[231]: Watching system buttons on /dev/input/event1 (Sleep Button)
Feb 26 16:46:40 arch systemd-logind[231]: Watching system buttons on /dev/input/event3 (Power Button)
Feb 26 16:46:41 arch kernel: microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
Feb 26 16:46:41 arch kernel: platform microcode: Direct firmware load failed with error -2
Feb 26 16:46:41 arch kernel: platform microcode: Falling back to user helper
Feb 26 16:46:41 arch kernel: input: 2.4G Wireless Wireless Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input17
Feb 26 16:46:41 arch kernel: hid-generic 0003:1915:0F01.0001: input,hidraw0: USB HID v1.11 Keyboard [2.4G Wireless Wireless Receiver ] on usb-0000:00:1d.1-2/input0
Feb 26 16:46:41 arch kernel: input: 2.4G Wireless Wireless Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input18
Feb 26 16:46:41 arch kernel: hid-generic 0003:1915:0F01.0002: input,hidraw1: USB HID v1.11 Mouse [2.4G Wireless Wireless Receiver ] on usb-0000:00:1d.1-2/input1
Feb 26 16:46:41 arch kernel: BUG: unable to handle kernel NULL pointer dereference at (null)
Feb 26 16:46:41 arch kernel: IP: [<ffffffffa06c1317>] mousedev_open_device+0x77/0x100 [mousedev]
Feb 26 16:46:41 arch kernel: PGD b650b067 PUD b650a067 PMD 0
Feb 26 16:46:41 arch kernel: Oops: 0000 [#1] PREEMPT SMP
Feb 26 16:46:41 arch kernel: Modules linked in: mousedev(+) hid_generic iTCO_wdt iTCO_vendor_support ath9k(+) usbhid ath9k_common hid ath9k_hw ath uvcvideo mac80211 microcode(+) videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media evdev psmouse serio_raw pcspkr cfg80211 lpc_ich i915(+) atl1e snd_hda_codec_via snd_hda_intel drm_kms_helper snd_hda_codec drm snd_hwdep snd_pcm snd_page_alloc i2c_algo_bit i2c_core snd_timer asus_laptop snd battery ac soundcore sparse_keymap acpi_cpufreq rfkill video input_polldev thermal intel_agp intel_gtt shpchp processor button ext4 crc16 mbcache jbd2 sr_mod cdrom sd_mod atkbd libps2 ahci libahci libata scsi_mod ehci_pci uhci_hcd ehci_hcd usbcore usb_common i8042 serio
Feb 26 16:46:41 arch kernel: CPU: 1 PID: 227 Comm: acpid Not tainted 3.13.5-1-ARCH #1
Feb 26 16:46:41 arch kernel: Hardware name: ASUSTeK Computer Inc. K50IJ /K50IJ , BIOS 217 12/04/2009
Feb 26 16:46:41 arch kernel: task: ffff88007ffeda00 ti: ffff8800b6516000 task.ti: ffff8800b6516000
Feb 26 16:46:41 arch kernel: RIP: 0010:[<ffffffffa06c1317>] [<ffffffffa06c1317>] mousedev_open_device+0x77/0x100 [mousedev]
Feb 26 16:46:41 arch kernel: RSP: 0018:ffff8800b6517c10 EFLAGS: 00010202
Feb 26 16:46:41 arch kernel: RAX: 0000000000000000 RBX: ffff8801390f5800 RCX: ffff8801390f5868
Feb 26 16:46:41 arch kernel: RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000246
Feb 26 16:46:41 arch kernel: RBP: ffff8800b6517c28 R08: 0000000000000000 R09: ffff88013b001600
Feb 26 16:46:41 arch kernel: R10: 0000000000000000 R11: 0000000000000004 R12: 0000000000000000
Feb 26 16:46:41 arch kernel: R13: ffff8801390f5880 R14: ffff8800b3287558 R15: ffff880138c8f600
Feb 26 16:46:41 arch kernel: FS: 00007f8de7e14700(0000) GS:ffff88013fd00000(0000) knlGS:0000000000000000
Feb 26 16:46:41 arch kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Feb 26 16:46:41 arch kernel: CR2: 0000000000000000 CR3: 00000000b6507000 CR4: 00000000000407e0
Feb 26 16:46:41 arch kernel: Stack:
Feb 26 16:46:41 arch kernel: ffff88013926e400 ffff8801390f5800 ffff8801390f5878 ffff8800b6517c60
Feb 26 16:46:41 arch kernel: ffffffffa06c20cc ffff8801390f5b48 ffff8800b3287558 ffff880138c8f600
Feb 26 16:46:41 arch kernel: ffffffffa06c2e80 ffff880138c8f610 ffff8800b6517c98 ffffffff811a834f
Feb 26 16:46:41 arch kernel: Call Trace:
Feb 26 16:46:41 arch kernel: [<ffffffffa06c20cc>] mousedev_open+0xcc/0x150 [mousedev]
Feb 26 16:46:41 arch kernel: [<ffffffff811a834f>] chrdev_open+0x9f/0x1d0
Feb 26 16:46:41 arch kernel: [<ffffffff811a19e7>] do_dentry_open+0x1b7/0x2c0
Feb 26 16:46:41 arch kernel: [<ffffffff811aedc1>] ? __inode_permission+0x41/0xb0
Feb 26 16:46:41 arch kernel: [<ffffffff811a82b0>] ? cdev_put+0x30/0x30
Feb 26 16:46:41 arch kernel: [<ffffffff811a1e01>] finish_open+0x31/0x40
Feb 26 16:46:41 arch kernel: [<ffffffff811b1bf2>] do_last+0x572/0xe90
Feb 26 16:46:41 arch kernel: [<ffffffff811af0b6>] ? link_path_walk+0x236/0x8d0
Feb 26 16:46:41 arch kernel: [<ffffffff811b25cb>] path_openat+0xbb/0x6b0
Feb 26 16:46:41 arch kernel: [<ffffffff811b3cda>] do_filp_open+0x3a/0x90
Feb 26 16:46:41 arch kernel: [<ffffffff811c05c7>] ? __alloc_fd+0xa7/0x130
Feb 26 16:46:41 arch kernel: [<ffffffff811a2fd4>] do_sys_open+0x124/0x220
Feb 26 16:46:41 arch kernel: [<ffffffff811a30ee>] SyS_open+0x1e/0x20
Feb 26 16:46:41 arch kernel: [<ffffffff8152142d>] system_call_fastpath+0x1a/0x1f
Feb 26 16:46:41 arch kernel: Code: c0 6e e5 e0 5b 44 89 e0 41 5c 41 5d 5d c3 66 0f 1f 44 00 00 4c 89 ef 41 bc ed ff ff ff e8 a2 6e e5 e0 eb e0 48 8b 15 c9 21 00 00 <8b> 02 8d 48 01 85 c0 89 0a 75 c6 48 8b 05 37 1f 00 00 48 3d 60
Feb 26 16:46:41 arch kernel: RIP [<ffffffffa06c1317>] mousedev_open_device+0x77/0x100 [mousedev]
Feb 26 16:46:41 arch kernel: RSP <ffff8800b6517c10>
Feb 26 16:46:41 arch kernel: CR2: 0000000000000000
Feb 26 16:46:41 arch kernel: ---[ end trace 76aa0cbb67cf77f6 ]---
Feb 26 16:46:41 arch kernel: microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
Feb 26 16:46:41 arch systemd[1]: acpid.service: main process exited, code=killed, status=9/KILL
Feb 26 16:46:41 arch systemd[1]: Unit acpid.service entered failed state.
Feb 26 16:46:41 arch kernel: [drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
Feb 26 16:46:41 arch systemd[1]: Started Laptop Mode Tools.
Feb 26 16:46:41 arch nxserver[374]: NX> 161 Enabled service: nxserver.
Feb 26 16:46:42 arch kernel: fbcon: inteldrmfb (fb0) is primary device
Feb 26 16:46:42 arch kernel: ath: phy0: Enable LNA combining
Feb 26 16:46:42 arch kernel: ath: EEPROM regdomain: 0x60
Feb 26 16:46:42 arch kernel: ath: EEPROM indicates we should expect a direct regpair map
Feb 26 16:46:42 arch kernel: ath: Country alpha2 being used: 00
Feb 26 16:46:42 arch kernel: ath: Regpair used: 0x60
Feb 26 16:46:42 arch kernel: ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Feb 26 16:46:42 arch kernel: ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90011e80000, irq=17
Feb 26 16:46:42 arch systemd-udevd[139]: renamed network interface wlan0 to wlp2s0
Feb 26 16:46:42 arch kernel: Console: switching to colour frame buffer device 170x48
Feb 26 16:46:42 arch kernel: i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
Feb 26 16:46:42 arch kernel: i915 0000:00:02.0: registered panic notifier
Feb 26 16:46:42 arch kernel: ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
Feb 26 16:46:42 arch kernel: acpi device:38: registered as cooling_device2
Feb 26 16:46:42 arch kernel: input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input19
Feb 26 16:46:42 arch nxserver[374]: NX> 161 Enabled service: nxnode.
Feb 26 16:46:42 arch nxserver[374]: NX> 161 Enabled service: nxd.
Feb 26 16:46:42 arch systemd[1]: Started NoMachine Server daemon.
Feb 26 16:46:42 arch systemd[1]: Starting Multi-User System.
Feb 26 16:46:42 arch systemd[1]: Reached target Multi-User System.
Feb 26 16:46:42 arch systemd[1]: Starting Graphical Interface.
Feb 26 16:46:42 arch systemd[1]: Reached target Graphical Interface.
Feb 26 16:46:42 arch systemd[1]: Startup finished in 1.241s (kernel) + 3.231s (userspace) = 4.473s.
Feb 26 16:46:46 arch kernel: IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
Feb 26 16:46:48 arch kernel: IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
Feb 26 16:46:49 arch wicd[226]: dhcpcd[1383]: dhcpcd not running
Feb 26 16:46:49 arch dhcpcd[1383]: dhcpcd not running
Feb 26 16:46:49 arch kernel: IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
Feb 26 16:46:49 arch wicd[226]: Failed to connect to non-global ctrl_ifname: wlp2s0 error: No such file or directory
Feb 26 16:46:49 arch wicd[226]: dhcpcd[1389]: dhcpcd not running
Feb 26 16:46:49 arch dhcpcd[1389]: dhcpcd not running
Feb 26 16:46:49 arch kernel: IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
Feb 26 16:46:49 arch wicd[226]: Failed to connect to non-global ctrl_ifname: enp3s0 error: No such file or directory
Feb 26 16:46:49 arch wicd[226]: dhcpcd[1397]: dhcpcd not running
Feb 26 16:46:49 arch dhcpcd[1397]: dhcpcd not running
Feb 26 16:46:49 arch kernel: IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
Feb 26 16:46:49 arch wicd[226]: Failed to connect to non-global ctrl_ifname: wlp2s0 error: No such file or directory
Feb 26 16:46:51 arch systemd[1]: Starting Getty on tty2...
Feb 26 16:46:51 arch systemd[1]: Started Getty on tty2.
Feb 26 16:46:52 arch kernel: wlp2s0: authenticate with 08:86:3b:7f:86:08
Feb 26 16:46:52 arch kernel: wlp2s0: send auth to 08:86:3b:7f:86:08 (try 1/3)
Feb 26 16:46:52 arch kernel: wlp2s0: authenticated
Feb 26 16:46:52 arch kernel: ath9k 0000:02:00.0 wlp2s0: disabling HT/VHT due to WEP/TKIP use
Feb 26 16:46:52 arch kernel: wlp2s0: associate with 08:86:3b:7f:86:08 (try 1/3)
Feb 26 16:46:52 arch kernel: wlp2s0: RX AssocResp from 08:86:3b:7f:86:08 (capab=0x411 status=0 aid=4)
Feb 26 16:46:52 arch kernel: wlp2s0: associated
Feb 26 16:46:52 arch kernel: IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
Feb 26 16:46:53 arch dhcpcd[1416]: version 6.2.1 starting
Feb 26 16:46:54 arch dhcpcd[1416]: DUID 00:01:00:01:1a:96:a5:70:1c:4b:d6:a2:1f:ad
Feb 26 16:46:54 arch dhcpcd[1416]: wlp2s0: IAID d6:a2:1f:ad
Feb 26 16:46:54 arch dhcpcd[1416]: wlp2s0: soliciting an IPv6 router
Feb 26 16:46:54 arch dhcpcd[1416]: wlp2s0: ipv6nd_sendrsprobe: sendmsg: Cannot assign requested address
Feb 26 16:46:54 arch dhcpcd[1416]: wlp2s0: rebinding lease of 192.168.2.3
Feb 26 16:46:55 arch kernel: type=1006 audit(1393429615.096:2): pid=1406 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=1 res=1
Feb 26 16:46:55 arch login[1406]: pam_unix(login:session): session opened for user root by LOGIN(uid=0)
Feb 26 16:46:55 arch systemd[1]: Starting user-0.slice.
Feb 26 16:46:55 arch systemd[1]: Created slice user-0.slice.
Feb 26 16:46:55 arch systemd[1]: Starting User Manager for 0...
Feb 26 16:46:55 arch kernel: type=1006 audit(1393429615.106:3): pid=1477 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=2 res=1
Feb 26 16:46:55 arch systemd[1]: Starting Session 1 of user root.
Feb 26 16:46:55 arch systemd[1]: Started Session 1 of user root.
Feb 26 16:46:55 arch systemd-logind[231]: New session 1 of user root.
Feb 26 16:46:55 arch systemd[1477]: pam_unix(systemd-user:session): session opened for user root by (uid=0)
Feb 26 16:46:55 arch login[1406]: ROOT LOGIN ON tty2
Feb 26 16:46:55 arch systemd[1477]: Failed to open private bus connection: Failed to connect to socket /run/user/0/dbus/user_bus_socket: No such file or directory
Feb 26 16:46:55 arch systemd[1477]: Mounted /sys/kernel/config.
Feb 26 16:46:55 arch systemd[1477]: Stopped target Sound Card.
Feb 26 16:46:55 arch systemd[1477]: Starting Default.
Feb 26 16:46:55 arch systemd[1477]: Reached target Default.
Feb 26 16:46:55 arch systemd[1477]: Startup finished in 7ms.
Feb 26 16:46:55 arch systemd[1]: Started User Manager for 0.
Feb 26 16:46:59 arch dhcpcd[1416]: wlp2s0: leased 192.168.2.3 for 283824000 seconds
Feb 26 16:46:59 arch dhcpcd[1416]: wlp2s0: adding route to 192.168.2.0/24
Feb 26 16:46:59 arch dhcpcd[1416]: wlp2s0: adding default route via 192.168.2.1
Feb 26 16:46:59 arch dhcpcd[1416]: forked to background, child pid 1522
Feb 26 16:47:10 arch kdm[238]: X server startup timeout, terminating
Feb 26 16:47:12 arch systemd-udevd[131]: worker [140] /devices/pci0000:00/0000:00:02.0 timeout; kill it
Feb 26 16:47:12 arch systemd-udevd[131]: seq 1255 '/devices/pci0000:00/0000:00:02.0' killed
Feb 26 16:47:12 arch systemd-udevd[131]: worker [146] /devices/platform/i8042/serio4/input/input15 timeout; kill it
Feb 26 16:47:12 arch systemd-udevd[131]: seq 1659 '/devices/platform/i8042/serio4/input/input15' killed
Feb 26 16:47:12 arch systemd-udevd[131]: worker [148] /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input18 timeout; kill it
Feb 26 16:47:12 arch systemd-udevd[131]: seq 1679 '/devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input18' killed
Feb 26 16:47:12 arch kernel: [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Feb 26 16:47:12 arch systemd-udevd[131]: worker [140] terminated by signal 9 (Killed)
Feb 26 16:47:12 arch systemd-udevd[131]: worker [148] terminated by signal 9 (Killed)
Feb 26 16:47:12 arch systemd[1]: Starting Load/Save Screen Backlight Brightness of acpi_video0...
Feb 26 16:47:12 arch systemd[1]: Started Load/Save Screen Backlight Brightness of acpi_video0.
Feb 26 16:47:12 arch kernel: input: failed to attach handler mousedev to device input15, error: -4
Feb 26 16:47:12 arch systemd-udevd[131]: worker [146] terminated by signal 9 (Killed)
Feb 26 16:47:12 arch kernel: input: failed to attach handler mousedev to device input18, error: -4
Feb 26 16:47:12 arch kernel: mousedev: PS/2 mouse device common for all mice
Feb 26 16:47:13 arch kdm[238]: X server for display :0 cannot be started, session disabled
Feb 26 16:48:56 arch kernel: usb 7-2: USB disconnect, device number 2
Feb 26 16:48:56 arch laptop-mode[1782]: Laptop mode
Feb 26 16:48:56 arch laptop-mode[1783]: enabled, not active
Feb 26 16:48:56 arch laptop-mode[1834]: Laptop mode
[xx@arch Desktop]$ uname -a
Linux arch 3.13.5-1-ARCH #1 SMP PREEMPT Sun Feb 23 00:25:24 CET 2014 x86_64 GNU/Linux
Could you please someone help me with this?
ThanksSorry to bump this, but I'm having the exact same error tonight on my HTPC, any chance you found out what the problem was ?
To make matters worse, it's not happening every single time, but maybe every 4 out of 5 boots (same kernel, no changes in between.)
I thought this was a kernel issue related to this:
https://lkml.org/lkml/2014/3/10/359
I've tried adding atkbd and psmouse to my mkinitcpio.conf MODULES section and rebuilt, but no change.
I changed the NVidia driver from nvidia-304xx to nvidia-full-beta-all ( 334.21 ) from AUR but it had the same error at the same place.
Here's the part from `dmesg` where it borks:
[ 3.229195] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:04.0-3/input2
[ 3.236312] input: Logitech Unifying Device. Wireless PID:400e as /devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.2/0003:046D:C52B.0003/input/input6
[ 3.237230] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:400e] on usb-0000:00:04.0-3:1
[ 3.279150] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 3.280083] IP: [<ffffffffa1cbc317>] mousedev_open_device+0x77/0x100 [mousedev]
[ 3.280810] PGD c99ea067 PUD c9f4a067 PMD 0
[ 3.281266] Oops: 0000 [#1] PREEMPT SMP
[ 3.281668] Modules linked in: mousedev(+) nvidia(PO+) snd_hda_codec_realtek hid_logitech_dj usbhid hid usb_storage coretemp evdev microcode pcspkr serio_raw snd_hda_intel(+) snd_hda_codec shpchp snd_hwdep snd_pcm snd_page_alloc snd_timer snd soundcore i2c_nforce2 i2c_core wmi processor button r8169 mii ext4 crc16 mbcache jbd2 sd_mod ata_generic pata_acpi ahci libahci libata ohci_pci ohci_hcd ehci_pci ehci_hcd scsi_mod usbcore usb_common psmouse atkbd libps2 i8042 serio
[ 3.281820] CPU: 1 PID: 211 Comm: acpid Tainted: P O 3.13.6-1-ARCH #1
[ 3.281820] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./MCP7A-ION, BIOS 080015 10/10/2009
[ 3.281820] task: ffff8800ca5c1b00 ti: ffff8800c97f0000 task.ti: ffff8800c97f0000
[ 3.281820] RIP: 0010:[<ffffffffa1cbc317>] [<ffffffffa1cbc317>] mousedev_open_device+0x77/0x100 [mousedev]
[ 3.281820] RSP: 0018:ffff8800c97f1c10 EFLAGS: 00010202
[ 3.281820] RAX: 0000000000000000 RBX: ffff8800c9987000 RCX: ffff8800c9987068
[ 3.281820] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000246
[ 3.281820] RBP: ffff8800c97f1c28 R08: 0000000000000000 R09: ffff8800cf401600
[ 3.281820] R10: 0000000000000000 R11: 0000000000000004 R12: 0000000000000000
[ 3.281820] R13: ffff8800c9987080 R14: ffff8800c0260058 R15: ffff8800c9f2a500
[ 3.281820] FS: 00007f8f12f05700(0000) GS:ffff8800cfa80000(0000) knlGS:0000000000000000
[ 3.281820] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 3.281820] CR2: 0000000000000000 CR3: 00000000ca93e000 CR4: 00000000000007e0
[ 3.281820] Stack:
[ 3.281820] ffff8800c9940000 ffff8800c9987000 ffff8800c9987078 ffff8800c97f1c60
[ 3.281820] ffffffffa1cbd0cc ffff8800c9987348 ffff8800c0260058 ffff8800c9f2a500
[ 3.281820] ffffffffa1cbde80 ffff8800c9f2a510 ffff8800c97f1c98 ffffffff811a83ef
[ 3.392372] Call Trace:
[ 3.398245] [<ffffffffa1cbd0cc>] mousedev_open+0xcc/0x150 [mousedev]
[ 3.398245] [<ffffffff811a83ef>] chrdev_open+0x9f/0x1d0
[ 3.398245] [<ffffffff811a1a87>] do_dentry_open+0x1b7/0x2c0
[ 3.398245] [<ffffffff811aee61>] ? __inode_permission+0x41/0xb0
[ 3.398245] [<ffffffff811a8350>] ? cdev_put+0x30/0x30
[ 3.398245] [<ffffffff811a1ea1>] finish_open+0x31/0x40
[ 3.398245] [<ffffffff811b1c92>] do_last+0x572/0xe90
[ 3.398245] [<ffffffff811af156>] ? link_path_walk+0x236/0x8d0
[ 3.398245] [<ffffffff811b266b>] path_openat+0xbb/0x6b0
[ 3.508083] random: nonblocking pool is initialized
[ 3.398245] [<ffffffff811b3d7a>] do_filp_open+0x3a/0x90
[ 3.398245] [<ffffffff811c0617>] ? __alloc_fd+0xa7/0x130
[ 3.398245] [<ffffffff811a3074>] do_sys_open+0x124/0x220
[ 3.398245] [<ffffffff811a318e>] SyS_open+0x1e/0x20
[ 3.398245] [<ffffffff815216ad>] system_call_fastpath+0x1a/0x1f
[ 3.556729] Code: 40 c1 85 df 5b 44 89 e0 41 5c 41 5d 5d c3 66 0f 1f 44 00 00 4c 89 ef 41 bc ed ff ff ff e8 22 c1 85 df eb e0 48 8b 15 c9 21 00 00 <8b> 02 8d 48 01 85 c0 89 0a 75 c6 48 8b 05 37 1f 00 00 48 3d 60
[ 3.556729] RIP [<ffffffffa1cbc317>] mousedev_open_device+0x77/0x100 [mousedev]
[ 3.556729] RSP <ffff8800c97f1c10>
[ 3.556729] CR2: 0000000000000000
[ 3.563412] ---[ end trace 590b482a8704c6ac ]---
[ 3.980300] input: HDA NVidia HDMI/DP,pcm=3 Phantom as /devices/pci0000:00/0000:00:08.0/sound/card0/input7
Here's the output on a good boot:
[ 3.415791] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:04.0-3/input2
[ 3.422256] input: Logitech Unifying Device. Wireless PID:400e as /devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.2/0003:046D:C52B.0003/input/input6
[ 3.422644] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:400e] on usb-0000:00:04.0-3:1
[ 3.434861] mousedev: PS/2 mouse device common for all mice
[ 3.853639] input: HDA NVidia HDMI/DP,pcm=3 Phantom as /devices/pci0000:00/0000:00:08.0/sound/card0/input7
Here's my mkinitcpio.conf
: grep -v ^\# /etc/mkinitcpio.conf
MODULES="atkbd psmouse"
BINARIES=""
FILES=""
HOOKS="base udev autodetect modconf block filesystems keyboard fsck"
Last edited by corpdecker (2014-03-19 02:47:30) -
Problem with long response time when looking at queues!
Hello,
I have a problem with extream long response times, when looking at the queues in Message mapping test tool . Does anyone know how to improve performance.
The source message I use is about 200 segments (idoc)
The mapping is done with the graphical tool, with 10-15 field contain standard sap functions for mapping.
Target structure is EDIFACT (xml)
Brgds
Karl BergströHi Rod.
Go to Apple Menu > System Preferences > Network > Show: Network Port Configurations. Make sure that the configuration used to connect to Internet is at the top of the list. Also, disable any communications/networking configuration enabled, but not in use.
If the above doesn't fix the problem, open Keychain Access > Preferences, and disable Search .Mac For Certificates if it's enabled. Take a look at the following articles for an explanation of why this could fix the problem:
http://www.hawkwings.net/2006/07/18/apple-mail-phones-home-too/
http://www.macgeekery.com/tips/mailapp_doesnt_phone_homeeither -
Problem with date and time preference
hi there,
i set my date and time and the time support yesterday and then i click the lock button to prevent further chance and last night i shut down my iMac, open it again in the morning the lock open back up and the timezone support change.
i redo that again and restart my iMac the same thing happen. is this a problem with my software or everyone have this problem?
any idea what should i do?
thanks in advance
regards ALHaving the same problem, & am running Parallels (which I haven't used for some time) not boot camp. I tick the box labeled "Set time automatically" & lock the "click the lock to make changes". When I reboot, the Lock is unlocked and the "set time...." is unticked. Any ideas. Cheers.
-
Problem with date and time syncing itouch to macbook
i have a problem with the date and time on ical when i sync my itouch4 w my macbookair. whatever i entered into my calendar in itouch will appear different in my ical( with a 6 hrs advance difference) and the alarm i set on my itouch in the calendar doesnt ring at the right time as set even though it is shown the time that i wanted.
Both my macbook n itouch are set to the same time zone and i have checked this many many times n the time is the same on both machine. but i just dont understand why is there a time difference when synced and my alarm just dont sound at the time it was supposedly set. it rings hours later n showing a different time that it was set but in the parenthesis the right time that i had set it.
One time my computer ran out of battery n went into sleep mode and when i open it again, the time n date setting was all off. which im surprised why it had gone off. So did this create the problem i have now with the date n time sync or something else?
please help!!!!Having the same problem, & am running Parallels (which I haven't used for some time) not boot camp. I tick the box labeled "Set time automatically" & lock the "click the lock to make changes". When I reboot, the Lock is unlocked and the "set time...." is unticked. Any ideas. Cheers.
-
Problems with creating a Time Machine backup on external HDD
Hello!
I tried to make a new Time Machine backup file on my external harddrive today.
Unfortunately it stopt after about 6 or 7 gb with the popup:
''the backup was not performed because an error occurred while copying files to the backup disk. The problem may be temporary. Try again later to back up. If the problem persists, use Disk Utility to repair your backup disk''
I'm certain that the HDD (Western Digital 1Tb) was correctly formatted (Mac Os Extended (Journaled)). It's the same type as my internal harddrive.
I also have a Time Machine Buddy logfile. Maybe that will help in finding the problem.
Also noticable is that after the backup failure, I can't seem to restore or format the external HDD. Once I connect it to a regular pcc and remove and reinstall the driver, I can use it again.
here is the logfile from the latest backup try:
Starting manual backup
Error determining directory contents for /Volumes/Time Machine: Error Domain=NSCocoaErrorDomain Code=256 "The file “Time Machine” couldn’t be opened." UserInfo=0x7faa73422f70 {NSFilePath=/Volumes/Time Machine, NSUserStringVariant=(
Backing up to: /Volumes/Time Machine/Backups.backupdb
Error -36 applying backup protections to /Volumes/Time Machine/Backups.backupdb/MacBook Pro van Rolf Perdok
Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/Time Machine/Backups.backupdb/MacBook Pro van Rolf Perdok size:37
Error -36 applying backup protections to /Volumes/Time Machine/Backups.backupdb/MacBook Pro van Rolf Perdok
Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/Time Machine/Backups.backupdb/MacBook Pro van Rolf Perdok size:37
Backup failed with error: 2
Thanks in advance!And I spoke too soon, backup just failed with:
22/10/2012 15:44:24.266 com.apple.backupd[555]: Stopping backup.
22/10/2012 15:44:24.267 com.apple.backupd[555]: Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Invalid argument
22/10/2012 15:44:24.267 com.apple.backupd[555]: Error: (-47) SrcErr:NO Copying /Applications/Xcode.app/Contents/Developer/Documentation/DocSets/com.apple.ADC_ Reference_Library.DeveloperTools.4_5.docset/Contents/Resources/Documents/recipes /xcode_help-project_editor/Art/BuildingTargetsintheCorrectOrder.m4v to /Volumes/Storage/Backups.backupdb/cizin/2012-10-22-152514.inProgress/ED608989-4 CF3-4713-8E62-3A32E8CC3917/Cizin/Applications/Xcode.app/Contents/Developer/Docum entation/DocSets/com.apple.ADC_Reference_Library.DeveloperTools.4_5.docset/Conte nts/Resources/Documents/recipes/xcode_help-project_editor/Art
22/10/2012 15:44:28.221 com.apple.backupd[555]: Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Invalid argument
22/10/2012 15:44:28.222 com.apple.backupd[555]: Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Invalid argument
22/10/2012 15:44:28.222 com.apple.backupd[555]: Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Invalid argument
22/10/2012 15:44:28.222 com.apple.backupd[555]: Copied 249786 files (10.64 GB) from volume Cizin.
22/10/2012 15:44:28.222 com.apple.backupd[555]: Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Invalid argument
22/10/2012 15:44:28.222 com.apple.backupd[555]: Copy stage failed with error:11
22/10/2012 15:44:31.231 com.apple.backupd[555]: Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Resource busy
22/10/2012 15:44:34.239 com.apple.backupd[555]: Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Resource busy
22/10/2012 15:44:34.239 com.apple.backupd[555]: Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Invalid argument
22/10/2012 15:44:34.358 com.apple.backupd[555]: Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/Storage/Backups.backupdb/cizin size:37
22/10/2012 15:44:44.739 com.apple.backupd[555]: Backup failed with error: 11
Time fo a bug report.
Maybe you are looking for
-
Is there a way to NOT have the data from a formatted search highlighted
Hi all, I have a formatted search that returns a big chunk of data, some comments that are then added to. When the fs is fired, it returns the data, but all of the data is highlighted so when the user starts typing they overwrite the data that was ju
-
Can u pl send me javamapping,abapmapping exercises.and step by step procedure. Thanks Srini
-
Preserving hyperlinks in Word to PDF Acrobat (MAC) conversion
Recently purchased Acrobat XI to convert rich text Word documents into PDF files that can contain live hyperlinks embedded in text. Specifically, I want to be able to include a name of an organization in the PDF version of the file so that if a read
-
Can't turn auto rotate off!
Hi, I got my Xperia Z1 today, and have now checked out everything on my new phone now, and I have just. discovered that I can't turn off the auto rotate feature Not sure if this happened after I updated to 4.3 This is really annoying, I have tried to
-
Videos just won't load over >50% and most of the time it's less than that. It's not even just youtube either. It's all online videos.