Problem with JCOP tool

Hi all,
I wrote simple applet and I tried to test it with JCOP Tool (eclipse) but I get this error
cm> /term "Remote|localhost:8050"
/card -a a000000003000000 -c com.ibm.jc.CardManagerATR: 3BFA1300008131FE454A434F5034315632323196
ATR: T=1, FI=1/DI=3 (93clk/etu), N=0, IFSC=254, BWI=4/CWI=5, Hist="JCOP41V221"
cm> set-key 255/1/DES-ECB/404142434445464748494a4b4c4d4e4f 255/2/DES-ECB/404142434445464748494a4b4c4d4e4f 255/3/DES-ECB/404142434445464748494a4b4c4d4e4f
cm> init-update 255
cm> ext-auth plain
cm> delete 4422331234
cm> delete 4422331234
jcshell: Error code: 6a88 (Reference data not found)
jcshell: Wrong response APDU: 6A88
Ignoring expected error
cm> delete 0000000001
cm> delete 0000000011
cm> upload -b 250 "D:\Development\Java\projects\JavaCard\HelloWorld\bin\org\erno\jc\hello\javacard\hello.cap"
cm> install -i 0000000001 -q C9#() 0000000011 0000000001
cm> upload -b 250 "D:\Development\Java\projects\JavaCard\test\bin\org\erno\test\javacard\test.cap"
cm> install -i 4422331234 -q C9#() 4422331234 4422331234
jcshell: Error code: 6985 (Conditions of use not satisfied)
jcshell: Wrong response APDU: 6985
Unexpected error; aborting executiondoes anybody know what is wrong with it? I am new about this :-(. thanx for any help.
regards
p.s. I'm using simulator not real card.

Hy,
here is the status I get when I try to run my applet
- /term "Remote|localhost:50337"
--Opening terminal
/card -a a000000003000000 -c com.ibm.jc.CardManagerresetCard with timeout: 0 (ms)
--Waiting for card...
ATR=3B FA 13 00 00 81 31 FE 45 4A 43 4F 50 34 31 56    ;.....1.EJCOP41V
    32 32 31 96                                        221.
ATR: T=1, FI=1/DI=3 (93clk/etu), N=0, IFSC=254, BWI=4/CWI=5, Hist="JCOP41V221"
=> 00 A4 04 00 08 A0 00 00 00 03 00 00 00 00          ..............
(15538 usec)
<= 6F 10 84 08 A0 00 00 00 03 00 00 00 A5 04 9F 65    o..............e
    01 FF 90 00                                        ....
Status: No Error
cm> set-key 255/1/DES-ECB/404142434445464748494a4b4c4d4e4f 255/2/DES-ECB/404142434445464748494a4b4c4d4e4f 255/3/DES-ECB/404142434445464748494a4b4c4d4e4f
cm> init-update 255
=> 80 50 00 00 08 D7 5D 16 84 88 87 8B B0 00          .P....].......
(4177 usec)
<= 00 00 57 F3 97 D9 7F 72 88 55 FF 02 00 00 3D 02    ..W....r.U....=.
    9C 31 C7 89 90 D8 41 D7 23 6B DD B4 90 00          .1....A.#k....
Status: No Error
cm> ext-auth plain
=> 84 82 00 00 10 45 11 3E D7 C1 3E 63 40 3A 2F EF    .....E.>..>c@:/.
    C1 E6 93 3C 0F                                     ...<.
(3099 usec)
<= 90 00                                              ..
Status: No Error
cm> delete 0000000012
=> 80 E4 00 00 07 4F 05 00 00 00 00 12 00             .....O.......
(1459 usec)
<= 6A 88                                              j.
Status: Reference data not found
jcshell: Error code: 6a88 (Reference data not found)
jcshell: Wrong response APDU: 6A88
Ignoring expected error
cm> delete 0000000012
=> 80 E4 00 00 07 4F 05 00 00 00 00 12 00             .....O.......
(1613 usec)
<= 6A 88                                              j.
Status: Reference data not found
jcshell: Error code: 6a88 (Reference data not found)
jcshell: Wrong response APDU: 6A88
Ignoring expected error
cm> upload -b 250 "D:\Development\Java\projects\JavaCard\JCErnad\bin\erno\jc\javacard\jc.cap"
=> 80 E6 02 00 12 05 00 00 00 00 12 08 A0 00 00 00    ................
    03 00 00 00 00 00 00 00                            ........
(3475 usec)
<= 00 90 00                                           ...
Status: No Error
=> 80 E8 80 00 E8 C4 81 E5 01 00 17 DE CA FF ED 02    ................
    02 04 00 01 05 00 00 00 00 12 07 65 72 6E 6F 2F    ...........erno/
    6A 63 02 00 21 00 17 00 21 00 09 00 0B 00 1E 00    jc..!...!.......
    0E 00 3D 00 0A 00 0B 00 00 00 4D 01 A3 00 00 00    ..=.......M.....
    00 00 00 01 01 00 04 00 0B 01 02 01 07 A0 00 00    ................
    00 62 01 01 03 00 09 01 05 00 00 00 00 12 00 08    .b..............
    06 00 0E 00 00 00 80 03 00 FF 00 07 01 00 00 00    ................
    1C 07 00 3D 00 01 10 18 8C 00 06 7A 05 30 8F 00    ...=.......z.0..
    03 3D 8C 00 00 18 1D 04 41 18 1D 25 8B 00 01 7A    .=......A..%...z
    02 21 18 8B 00 02 60 03 7A 19 8B 00 04 2D 1A 04    .!....`.z....-..
    25 73 00 09 00 00 00 00 00 0F 11 6D 00 8D 00 05    %s.........m....
    7A 08 00 0A 00 00 00 00 00 00 00 00 00 00 05 00    z...............
    1E 00 07 06 00 00 01 03 80 03 02 03 80 03 03 01    ................
    00 02 00 03 80 0A 01 06 80 07 01 06 80 03 00 09    ................
    00 0B 00 00 00 07 05 06 04 0A 07 07 13 00          ..............
(18434 usec)
<= 00 90 00                                           ...
Status: No Error
Load report:
232 bytes loaded in 0.0 seconds
effective code size on card:
      + package AID       5
      + applet AIDs       12
      + classes           17
      + methods           64
      + statics           0
      + exports           0
        overall           98 bytes
cm> install -i 0000000012 -q C9#() 0000000012 0000000012
=> 80 E6 0C 00 18 05 00 00 00 00 12 05 00 00 00 00    ................
    12 05 00 00 00 00 12 01 00 02 C9 00 00 00          ..............
(3280 usec)
<= 69 85                                              i.
Status: Conditions of use not satisfied
jcshell: Error code: 6985 (Conditions of use not satisfied)
jcshell: Wrong response APDU: 6985
Unexpected error; aborting executionthanks
regards
erno

Similar Messages

Problems with Pro Tools 8, is it the software?

Hello, I know this is "Apple Discussions", but since I'm using Pro tools 8 with the new macbook pro, I might get some answers here. I recently bought pro tools 8, I already have logic though, but wanted to be in the pro tools world too so, the thing is that every time I use Pro Tools 8 with the digi 003, the session Im working on will stop with just a few plugins, and man this happens a lot, on the other hand is that nothing happens when I use the digi 003 with Logic 8, I mean, I could have like 20 plugins and It would not stop at all. Can anyone identify with this problem with pro tools 8, Because people tell me that on pro tools 7.4 that doesnt happen at all.
Thank you...

PT8 is much better with plug ins than PT7x, but is not in the league of Logic. I am a huge PT fan and use both Logic and PT8, and as much as I love the look and superior interface of PT8, Logic is like an ugly old car that goes 200 MPH. It's a performance beast. I've had ridiculous amounts of plug ins in Logic with not a whimper from the program.
PT8 is much more sensitive to things like whether you are using Firewire drives to record to (as opposed to internal SATAs on a Mac Pro), and many 3rd party plugs cause PT much grief. For high track counts and lots of plug ins, Logic is still King Kong.
TH
Message was edited by: Tom Hartman1

Unknown Error with JCop Tools 3.1.2

Hello All ,
I am using Eclipse program to create a javacard applet...
But there is a unknown Problem appears to me ..I don't know how to solve it.
First of All ,
My OS is Windows 7 x64 bit
My java version is : 1.6
My Eclipse version is : 3.2
My Smart Card Reader is : Omnikey ,CardMan 5321
So First of All , i added the plugin "JCOP tools 3.1.2" to the Eclipse program , and i activated the tools successfully.
and i created a new javacard project by using Basic Javacard template
Now when i want to Run ,
SO i when i set the Run options to Card Reader , and set the card reader to "OmniKey"
like this image:
[Image 1|http://img85.imageshack.us/img85/1158/runx.jpg]
-By the way , i don't understand where "Philps Pegoda Reader" came from?? -
Then when i press Run , the Eclipse program will be closed and this error appears:
[Error Image|http://img135.imageshack.us/img135/2926/errorevs.jpg]
I am not sure what is the problem ... so please some one help me here...
Thank you for your time
Edited by: ahmed30 on May 25, 2010 8:44 AM

Hi,
The pegoda reader is the default reader that has hard coded support (like JCOP engineering sample cards). I would say this is because NXP was founded by Phillips.
I cannot help you with the second issue. I have only used JCOP 3.1.2 for a short time (quite a while ago now) and reverted to 3.1.1.b as 3.1.2 did not add any new features and from memory did not work properly on my WIndows XP machine (32-bit). I can confirm that 3.1.1 works on XP 64-bit under a 32-bit JVM.
Is the issue when running against a card or the simulator or both?
You could try running the jcop.exe executable in the plugins\com.ibm.bluez.jcop.eclipse_<version>\simuls\nJCOP\win32\x86 directory from a command prompt to see if it is an issue with Eclipse/Java or the JCOP simulator.
Cheers,
Shane

Problem with Pen Tool CS5

Hi,
I just got Photoshop CS5 and I'm having a bit of trouble with the pen tool - namely, I can't see the path I'm creating. In CS3 I could clearly see the line between two points but in the new program the line is nearly invisible making it very difficult to create the path. Is this a setting I can fix?
thanks

I was having 32 bit while I upgraded from CS3 to CS4. The only problem with CS4 that time was with pen tool.Though I cannot precisely recall , I can say it t was very lazy and very frustrating and this was resolved totally after shifting to 64 bit.--If urs existing system is 32 bit try with 64 bit

Problems with Mapping Tool in Tutorial

Hello,
I am having problems with section 2.3 in the tutorial, even with the
completed solutions of the tutorial. In particular, I cannot add Rabbit
and Snake to the petshop. I get the following errors:
C:\Apps\kodo-jdo-3.1.2\tutorial\solutions>javac *.java
C:\Apps\kodo-jdo-3.1.2\tutorial\solutions>jdoc package.jdo
578 INFO [main] kodo.Tool - JDO enhancer running on type "class
tutorial.Animal".
907 INFO [main] kodo.Tool - The class is already persistence capable -
no enhancement performed.
907 INFO [main] kodo.Tool - JDO enhancer running on type "class
tutorial.Dog".
907 INFO [main] kodo.Tool - The class is already persistence capable -
no enhancement performed.
907 INFO [main] kodo.Tool - JDO enhancer running on type "class
tutorial.Rabbit".
985 WARN [main] kodo.Enhance - Type "class tutorial.Rabbit" has no
metadata; enhancing as persistence aware. If you intended for "class
tutorial.Rabbit" to be persistence-capable, then this means that Kodo
could not find any JDO metadata for "class tutorial.Rabbit". This can
happen if the directory containing your metadata is not in your CLASSPATH,
or if your JDO metadata files are not named in accordance with the JDO
specification. See the Metadata Placement section of the Java Data Objects
documentation distributed with Kodo JDO for more information.
985 INFO [main] kodo.Tool - The class does not have JDO metadata -
enhanced as persistence-aware.
1063 INFO [main] kodo.Tool - JDO enhancer running on type "class
tutorial.Snake".
1094 WARN [main] kodo.Enhance - Type "class tutorial.Snake" has no
metadata; enhancing as persistence aware. If you intended for "class
tutorial.Snake" to be persistence-capable, then this means that Kodo could
not find any JDO metadata for "class tutorial.Snake". This can happen if
the directory containing your metadata is not in your CLASSPATH, or if
your JDO metadata files are not named in accordance with the JDO
specification. See the Metadata Placement section of the Java Data Objects
do
cumentation distributed with Kodo JDO for more information.
1094 INFO [main] kodo.Tool - The class does not have JDO metadata -
enhanced as persistence-aware.
C:\Apps\kodo-jdo-3.1.2\tutorial\solutions>mappingtool -action refresh
package.jdo
3812 INFO [main] kodo.Tool - Mapping tool running on type "class
tutorial.Animal" with action "refresh".
4047 WARN [main] kodo.MetaData - There has been a change to the
definition of "tutorial.Animal" or its schema since it was last mapped, or
the mapping you defined is invalid: "The table "ANIMAL" specified in the
mapping for type "tutorial.Animal" does not exist."
4062 WARN [main] kodo.MetaData - There has been a change to the
definition of "tutorial.Animal.<version-indicator>" or its schema since it
was last mapped, or the mapping you defined is invalid: "The "column"
attribute/extension for the version indicator on type
"tutorial.Animal.<version-indicator>" is missing or names a column
"JDOVERSION" that does not exist."
4062 WARN [main] kodo.MetaData - There has been a change to the
definition of "tutorial.Animal.<class-indicator>" or its schema since it
was last mapped, or the mapping you defined is invalid: "The
"class-column" attribute/extension for the class indicator on type
"tutorial.Animal.<class-indicator>" is missing or names a column that does
not exist."
4062 WARN [main] kodo.MetaData - There has been a change to the
definition of "tutorial.Animal.name" or its schema since it was last
mapped, or the mapping you defined is invalid: "The "column"
attribute/extension for field "tutorial.Animal.name" is missing or names a
column "NAME0" in table "ANIMAL" that does not exist."
4062 WARN [main] kodo.MetaData - There has been a change to the
definition of "tutorial.Animal.price" or its schema since it was last
mapped, or the mapping you defined is invalid: "The "column"
attribute/extension for field "tutorial.Animal.price" is missing or names
a column "PRICE" in table "ANIMAL" that does not exist."
4078 INFO [main] kodo.Tool - Mapping tool running on type "class
tutorial.Dog" with action "refresh".
4078 INFO [main] kodo.Tool - Mapping tool running on type "class
tutorial.Rabbit" with action "refresh".
Exception in thread "main" kodo.meta.JDOMetaDataNotFoundException: No JDO
metadata was found for type "class tutorial.Rabbit". Ensure that your JDO
metadata files are accessible via resource lookup at runtime (typically
this means they must be in your CLASSPATH), and that they are located in
one of the JDO standard locations.
at
kodo.meta.JDOMetaDataRepositoryImpl.getMetaData(JDOMetaDataRepositoryImpl.java:131)
at
kodo.meta.DelegatingJDOMetaDataRepository.getMetaData(DelegatingJDOMetaDataRepository.java:123)
at
kodo.jdbc.meta.MappingRepository.getMapping(MappingRepository.java:161)
at kodo.jdbc.meta.MappingTool.refresh(MappingTool.java:576)
at kodo.jdbc.meta.MappingTool.run(MappingTool.java:909)
at kodo.jdbc.meta.MappingTool.run(MappingTool.java:850)
at kodo.jdbc.meta.MappingTool.main(MappingTool.java:783)
C:\Apps\kodo-jdo-3.1.2\tutorial\solutions>

It sounds like your CLASSPATH is not set up correctly. Did you follow
the instructions in the README for setting up your environment?

Getting started with JCOP Tools

I have a working Eclipse + JCOP Tools installation, activated. I now also have a Cardman reader (drivers loaded) and some blank JCOP30 cards. I read through the Eclipse embedded JCOP help page, but couldn't find the answers to some simple questions:
1. How can I see a list of connected readers to ensure my reader hardware is recognized? I read earlier on the forums about a "Launch Configuration page". How do I access this page?
2. The JCOP Shell seems to be working... my cards are blank and /terminal does show "Slot empty" or "Card present" so I presume the interface is running fine. My cards are totally blank. Can I still read any useful info from them such as vendor strings, version#, etc?
3. Do the JCOP Tools 3.1.2 come with a sample project? Since I've never used this environment, I would love to see an example of working code that can be simulated or loaded onto a physical card. It would help me "learn by example"
If there is sample code, where can I find it? I tried to use Eclipse's import from archive but didn't find anything resembling samples within jcop tools. Any example you know of would be great.

Here is the ATR and cplc output for my card. So far I know with certainty it's JCOP30-something and it supports T=CL.
But I'm not even sure which Java Card and Global Platform it supports! The "JCOP version map" from the 2003 specs document says JC 2.1.1 and GP 2.0.1, but http://www-306.ibm.com/software/wireless/wecos/jcop30.html says these cards are JC 2.2.1 and GP 2.1.1. Yikes! Which do I have?
cm> /atr
resetCard with timeout: 0 (ms)
--Waiting for card...
ATR=3B 86 80 01 4A 43 4F 50 33 30 12                   ;...JCOP30.
ATR: T=0, T=1, Hist="JCOP30"
cm> get-cplc
=> 80 CA 9F 7F 00                                     .....
(11274 usec)
<= 9F 7F 2A 40 70 95 16 40 51 30 84 30 1A 61 12 00    ..*@[email protected]..
    69 00 90 95 59 40 70 61 19 00 00 00 00 06 31 13    [email protected].
    30 36 39 30 30 00 00 00 00 00 00 00 00 90 00       06900..........
Status: No Error
IC Fabricator                      : 4070
IC Type                            : 9516
Operating System ID                : 4051
Operating System release date      : 3084 (25.3.2003)
Operating System release level     : 301A
IC Fabrication Date                : 6112 (22.4.2006)
IC Serial Number                   : 00690090
IC Batch Identifier                : 9559
IC Module Fabricator               : 4070
IC Module Packaging Date           : 6119 (29.4.2006)
ICC Manufacturer                   : 0000
IC Embedding Date                  : 0000
IC Pre-Personalizer                : 0631
IC Pre-Perso. Equipment Date       : 1330 (26.11.2001)
IC Pre-Perso. Equipment ID         : 36393030
IC Personalizer                    : 0000
IC Personalization Date            : 0000
IC Perso. Equipment ID             : 00000000

Problem with move tool? (Win 7)

On Photoshop CS4 , everytime I select the move tool and decide to move an object among a layer , it moves the object off screen , making it difficult to bring it back to the canvas to move . I know it isn't jumping layers , because only the object inside of one layer i moved , but ... am I the only one that has this problem ? How do I fix it ?
It doesn't only have this problem with the move tool , but with the text tool , marquee tools , and the brush tool , as well . The text tool would jump off screen , the marquee tool would position the marquee somewhere other than where I clicked it to be , and the brush tool would sometimes jump out of the brush outline . Can someone help ?

Standard questions:
Have you updated to version 11.0.1?
Have you updated your video drivers?
Is you video card compatible? See http://www.adobe.com/go/kb405711
Have you tried turning off OpenGL in preferences?
If the answer to all is yes, try resetting your preferences as described in the FAQ.
http://forums.adobe.com/thread/375776?tstart=0
You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
This resets all settings in Photoshop to factory defaults.
A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.

Problem with width tool in illustrator cc

hello!
i used to use illustrator cs5 and had no problems with the width tool. now that i am using adobe CC, the width tool functions very oddly and the cursor points are bizarre. for example, i use to just hover over the exact width point and could easily access handlebars or move it. however, in CC, i have to hover a little further away in order to get the ~ symbol to show. PLEASE HELP. this is driving me bonkers and the rate at which i'm working is quite delayed. THANK YOU!!!

Without proper system info and other details nobody can tell you anything.
Mylenium

Photoshop CS5 - Image resize problem with move tool

Hi People
Here's my problem
When I try to resize an layer using the move tool (as opposed to the Free Transform tool), while I'm in the process of moving the scaling handles, the bounding box reflects my movement but the layer preview stays at it's original size. When I stop moving the handles there is a few seconds delay and then the new scale size shows up. If I try to move the handles again, without commiting to the transform, the layer preview reverts back to it's original size until I've finished moving the handles.
I didn't have this problem with CS4 and I've only recently upgraded. I work around this problem by using the proper Free Transform tool (ctrl+t) but it would be nice to know why the hell this happens. It seems to me to be more of a graphical glitch than a software preference but I thought I'd check just-in-case.
Specs:
Photoshop CS5 V12.1 x64
PC
Intel Xeon W3505 @2.53GHz
Nvidia Quadro FX580
12 GB RAM

ace591 wrote:
Hi People
Here's my problem
When I try to resize an layer using the move tool (as opposed to the Free Transform tool), while I'm in the process of moving the scaling handles, the bounding box reflects my movement but the layer preview stays at it's original size. When I stop moving the handles there is a few seconds delay and then the new scale size shows up. If I try to move the handles again, without commiting to the transform, the layer preview reverts back to it's original size until I've finished moving the handles.
I also read you you tried updating your video dirvers and your syste crashed and you had to roll back. Make sure you have downloaded the latest correct drivers. If that does not work try turning off Open GL in photoshops preferences.
On my old XP 32 bit system CS5 movet tool with transform dialog does not fail like on your system. I can move the handles time and time again without commiting the transform. The only way to have Photoshop revert the transform back to the original state is to press the ESC key to cancel the uncommitted transform.

Problem with Eraser tool in PSE7

I have the PSE7 (using in Windows Vista) and have been using it for scrapbooking since early May09. I've had no real problems with it up until yesterday when my eraser tool stopped working. The magic eraser will still work, but the regular eraser will no longer erase. I've tried going out of the program and coming back in with no difference. I've tried rebooting the computer hoping it would reset but no difference. Has anyone else had this problem or does anyone have any ideas on how to fix it? I would greatly appreciate any help as I "can't live without my eraser tool"! ;0)
teri

If you have a tablet, the mouse and pen can not both be on (or touching) the tablet at the same time.
If you don't have a tablet or the above isn't causing the issue, the next thing to do is reset the eraser tool. With the eraser selected, click the eraser icon in the options bar...not the tool box...and select "reset tool" from the context menu.
Item "A" in the diagram of the options bar in this help index page is the tool icon which houses the reset tool(s) context menu.
http://help.adobe.com/en_US/PhotoshopElements/7.0_Win/WSae2ea3b149d0c3591ae939f103860b3d59 -7e27.html
If the above does not fix the problem, the next step is to reset the application preference files.
To reset all of your Photoshop preferences, hold down the
Control+Alt+Shift (Windows), Command+Option+Shift (Mac) keys as you launch the application.
EDIT: You have to press those three keys immediately after you launch the editor portion of the application to get the delete user settings dialog to come up. If you don't get a dialog, you did not press those three keys fast enough.

Problem with lasso tool in PSE10!!

Will start using lasso tool and then the picture will flicker and the lassoo tool will not function to continue with the selection. Has worked ok in the past but not now. Have tried reset tool but did"t work out problem. Why the flicker of the picture as this throughs the alignment of the lassoo off and you cannot continue with the outline. Very frustrating!!

99jon sorry to report that I went into my lassoo tool this morning and I am still having a problem with it. I tried hitting the info on the picture until not responding appears on upper left of windows and went ahead and began my selection with the tool and bam the screen flickered and ruined the alignment of the lassoo and rendered it non functional. would it be better if I tried a re-inastll of pse 10? The above technique did work late yesterday,but not now. Thanks!!
Irwin Lakin
<mailto:[email protected]> [email protected]
508-866-4250

Problem with Marquee Tool

I'm having a problem in Photoshop 7.0 where I can't see the borders of the selected area while dragging the cursor. Once I release the mouse button I can see the borders OK, but not while dragging. This makes precision selections difficult. It seem to happen with any tool used to select an area i.e. marquee, lasso, pen, etc. Any suggestions would be most appreciated.
Thanks,
Perry

The first thing to try is resetting the tool.
If that doesn't help try resetting your preferences as described in the FAQ.
http://forums.adobe.com/thread/375776?tstart=0
You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
This resets all settings in Photoshop to factory defaults.

Problems with Proofing Tools 15.0.4420.1017

Hi,
I`m having problem with installation of Proofing tools 2013 version 15.0.4420.1017, thing is when I install it on Windows 8 x64 OS where Office 2013 presents I cannot identify that version 15.0.4420.1017 of proofing tools has been installed.
I did also SCCM 2012 deployment to my machine and it failed because of detection method where it is not creating uninstall registries but if I remove one which is already installed by Office 2013 then it installs successfully. Can you please suggest the way
how to check more if version 15.0.4420.1017 of proofing tools has been installed when old version presents as well as I`m not sure actually how to test it. Hope that question make sense.

Hi,
Thanks for your post. If I have understood you correctly, after installing the latest Microsoft Office Proofing Tools 2013, you are not able to tell whether or not it was properly installed on your computer.
I have tested it on my machine. I have Microsoft Office Proofing Tools 2013 - Chinese (Simplified) 15.0.4569.1506
installed on my machine before. And then, I downloaded and installed the latest 15.0.4420.1017 version. Both versions appear in my software list in Control Panel, see:
Please check in Control Panel\Programs\Programs and Features and see if you have both versions there. If the new version of Proofing tools doesn't show in Control Panel, try reboot your system and check again.
If I have misunderstood anything, please feel free to post back.
Thanks,
Ethan Hua CHN
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Problems with Clone Tool / Content Aware Scaling in CS4 Mac

I've been using PS for about 1 year and a half. Sort of an Advanced beginner. One of the things I love is the clone tool. Since I've upgraded to CS4 I've had nothing but problems with the Clone tool. When I go over an area it doesn't show anything and the either makes the adjustments after a long delay or it goes black and then comes back with the adjustment. Sometimes when I'm dragging the brush the whole picture goes away replaced by a smear of color noise. It really makes the tool unusable. In many cases I've gone back to CS3.
I also have similar problems with the content aware scaling. Never been able to get it to work. Basically some of the nicest new features of CS4 are worthless for me. Tried looking at Adobe solution and searching the forums but I haven't seen any exactly similar problems of solutions.
Any help appreciated. I have a white 24' Intel Mac with a 2.33 GHz Intel Core 2 Dual with 3GB RAM.
Alan

As always the various User Forums are fantastic. Adobe (and other) get everyone to do their Tech Service for them. Thanks for the help.
So, two new pieces of info. When I disable Open GL everything works fine. (Sorry about the TIFF, I just didn't catch it) So in essence this solves my problem.
Also PS CS4 works perfectly on my new Aluminum MacBook. So clearly it is an issue with the video board on my iMac.
This brings me to the wrap-up question. Should PS CS4 theoretically work with Open GL on my iMac or is it a know problem with CS4 and older graphics boards? I'm assuming my board supports Open GL.
This is the Profiler data on the Graphics Card
Chipset Model: NVIDIA GeForce 7600 GT
Type: Display
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 256 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0391
Revision ID: 0x00a1
ROM Revision: 3021
Displays:
iMac:
Resolution: 1920 x 1200
Depth: 32-bit Color
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Built-In: Yes
Some of the Open GL features are nice and wouldn't mind having them but not worth buying a new Mac for. So the questions is: Is the some kind of upgrade / driver I can load to solve this problem.
Again Thanks for the help

Debug Problem on Jcop Tools

Hello,
I have developed a Java Card Applet on Eclipse and I can run it through Jcop Tools' simulator. However, when I try to debug it, simulator returns 6A80 to upload command. Would you please tell me, what can be the reason of this problem?
Thanks in Advance,
Regards

Dear ankey21, thank you for your response. Restarting Eclipse could not solve the problem.
Here is apdu trace:
cm> upload -d -b 250 "D:\**.cap"
=> 80 E6 02 00 12 05 6D 79 61 70 70 08 A0 00 00 00    ......myapp.....
    03 00 00 00 00 00 00 00                            ........
(1556 usec)
<= 00 90 00                                           ...
Status: No Error
=> 80 E8 00 00 FA C4 83 01 1E D7 01 00 15 DE CA FF    ................
    ED 02 02 04 00 01 05 6D 79 61 70 70 05 6D 79 61    .......myapp.mya
    70 70 02 00 21 00 15 00 21 00 09 00 32 04 56 00    pp..!...!...2.V.
    55 4A 89 00 DD 0A 62 00 00 0C 5F B7 73 00 18 00    UJ....b..._.s...
    0B 00 B2 05 01 00 04 00 32 05 02 01 07 A0 00 00    ........2.......
    00 62 01 01 02 01 07 A0 00 00 00 62 02 01 02 01    .b.........b....
    07 A0 00 00 00 62 01 02 00 01 06 A0 00 00 01 51    .....b.........Q
    00 00 01 07 A0 00 00 00 62 00 01 03 00 09 01 05    ........b.......
    4D 79 41 70 70 04 09 06 00 55 00 00 80 00 80 03    MyApp....U......
    43 00 40 04 06 00 00 04 32 FF FF 04 1D 04 3C 32    [email protected].....<2
    E3 32 EE 00 84 00 07 00 07 01 02 00 08 47 4D 47    .2...........GMG
    72 46 56 46 66 46 95 46 D1 47 11 47 E1 47 F6 48    rFVFfF.F.G.G.G.H
    04 00 84 00 08 00 07 01 00 00 0A 49 6E 49 BA 49    ...........InI.I
    C4 49 D0 49 EB 4A 0C 4A 1B 4A 2D 4A 3F 4A 71 07    .I.I.J.J.J-J?Jq.
    4A 89 24 03 D3 80 1A 03 ED 00 00 04 25 80 04 04    J.$.........%...
    2B 00 AB 04 54 01 AE 06 04 00 64 04 54 01 AE 00    +...T.....d.T...
(864915 nsec)
<= 6A 80                                              j.
Status: Wrong data
jcshell: Error code: 6a80 (Wrong data)
jcshell: Wrong response APDU: 6A80
Unexpected error; aborting executionRegards,

Problem with JCOP tool

Similar Messages

Maybe you are looking for