Problem with JPGs Downlaoded with Nikon Transfer - Can't Apply Develop Settings in Bridge CS4 and ACR 5.3 Settings Don't Stick

I have found what I believe is a "problem" with JPGs downloaded using Nikon Transfer (ver 1.4.1) and processing same in Adobe Bridge CS4 (Develop Settings) and/or Adobe Camera Raw 5.3 (Photoshop CS4 and Elements 6 as hosts).
Anyone using these programs in their workflow?
The problem, quite simply, is that neither ACR settings (nor Bridge CS4 Develop Settings) "stick" when applied to JPGs that have been downloaded via Nikon Transfer ver 1.4.1.
The same images from the same cameras (D300 and D90), downloaded moments later using Nikon's predecessor software PictureProject work just fine in both Bridge and ACR. Develop Settings appled in Bridge immediately are seen, and JPGs opened in ACR, and settings applied, then "Done" immediately stick and are reflected in Bridge.
If someone else is processing their JPGs in this manner, please let me know, as I have reported the problem to both Nikon and Adobe, and although I have tested it on two different cameras and two differnt laptops, I would like to get an impartial result as well.
One other test, the problem does not seem to affect Nikon's RAW (NEF) format files downloaded from a D2x using Nikon Transfer. More/different test are forthcoming.
Thanks
jeff

ALoverofNikon wrote:
I have generally thought that using the camera manufacturer's software was the safest and most conveneint
Can't say one way or another on that statement about using manufacturers' software. Since Adobe has to interpret each camera models' RAW format having the latest ACR seems to be the best option. But if the manufacturers' software is more convenient, and you get the same results then use it. But it does appear you are not getting what you want, so suggest you try a duplicate test run with images straight from the card reader to Bridge and see if you still have same problems.
I do know it is widely recommended that using a quality card reader gives you more reliable data than getting the pictures straight from the camera. Does not seem intuitive, but that has been experience of many.

Similar Messages

I plug my ipod into my computer itunes pops up with error message "Ipod detected but can't be identified properly" suggests I unplug and try again or uninstall itunes and reinstall nothing works. What should i do?

I plug my ipod into my computer itunes pops up with error message "Ipod detected but can't be identified properly" suggests I unplug and try again or uninstall itunes and reinstall nothing works. What should i do?

summarizing:
iPod nano (what version iOS BEFORE update?)
downloaded music
updated iPod to iOS 8.1.2
Windows 7 PC
plug-in iPod to PC
error message from iTunes on the PC "Ipod detected but can't be identified properly" ⬅[quoted from your original post] (+ suggested troubleshooting steps)
un-plug > re-plug iPod (how many times?)
iTunes un-installed from PC (?)
iTunes RE-installed to PC (?)
error message repeats(?)
searched "Ipod detected but can't be identified properly" site:support.apple.com with ZERO results - pretty strange that the support site wouldn;t know an iTunes generated error message (?) EDIT - had an "aha! moment when using a fresh Google search page and 'suggested' CANNOT
then "Ipod detected but can't be identified properly" site:discussions.apple.com had ONE result = Can't connect to iTunes with ipod touch (-50 error) - NO REPLIES
CANNOT instead of can't [ tsk tsk ]
iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
follow all the instructions in order and let us know

I want to synchronize my iPOP with my new MAC. How can i do that without lost my applications and songs???

I want to synchronize my iPOP with my new MAC. How can i do that without lost my applications and songs???

Backup you library and restore to the new computer.
iTunes: Back up your iTunes library by copying to an external hard drive
or
iTunes: How to move your music to a new computer
- After all the media is on the new computer connect the iPod to the computer and make a backup by right clicking one the iPod under Devices in iTunes and select Back Up
- Restore the iPod from that backup
Note that the iPod backup that iTunes makes does not include synced media like apps and music.

I don't want to stay with iOS 7 any more, i can't tolerate it to being very slow and to hand while playing games, it doesn't run properly, i have no games in my phone right now becouse of that bug, could i downgrade my ios of iphone 4s? Please help thanx

I don't want to stay with iOS 7 any more, i can't tolerate it to being very slow and to hand while playing games, it doesn't run properly, i have no games in my phone right now becouse of that bug, could i downgrade my ios of iphone 4s? Please help thanx

That is HANG sorry miss type

Bought a used ipod 4 th and it came with a restrictions passcode. What can i do to either reset or reset and wipe clean all data?

Bought a used ipod 4 th and it came with a restrictions passcode. What can i do to either reset or reset and wipe clean all data?

Forgotten RESTRICTIONS Passcode
- Place the iOS device in Recovery Mode and restore via iTunes. For how to restore: iTunes: Restoring iOS software
Then
- Restore to factory settings/new iPod

Mail error "Verify that you have addressed this message correctly. Check your SMTP server settings in Mail preferences and verify any advanced settings with your system administrator.Select a different outgoing mail server from the list"

The Mail application has suddenly started giving error:
"Verify that you have addressed this message correctly. Check your SMTP server settings in Mail preferences and verify any advanced settings with your system administrator.Select a different outgoing mail server from the list"
It was working fine till yesterday, suddenly it stopped. I have 3 email accounts configured here, 2 are on exchange servers and one yahoo. Connection verification works and shows all servers as green.
Any inputs?

I had 3 accounts, 2 ms exchange accounts and 1 yahoo. After removal of yahoo, everything is back to normal.
Regards
Rohit

How can I apply drop shadow effects to graphics and pictures? It was very easy in previous versions and I can't find it. Thanks

How can I apply drop shadow effects to graphics and pictures? It was very easy in previous versions of Final Cut and I can’t find it. Thanks

Try this one, works marvelous:
http://www.rippletraining.com/using-the-rt-drop-shadow-in-final-cut-pro-x.html
Regards
Nolan

Can't open RAW Nikon files (NEF) using PS3 10.0 running 10.6.8 , think there is a conflict with camera Raw plug-in. Can't open raw images in bridge or photoshop.

I think I may have a Camera Raw plug-in conflict or plug in may be in the wrong place. In both PS3 and Bridge Nikon raw files (NEF) will not open. I've noticed that in photoshop in the pull down menu-about plug-in, I have 2 Camera Raw (s) listed, getting info one is 4.0, the other 4.6.0.30. It appears that my files and .xmp are 4.0 just by searching for 'Camera Raw' either 4. or 4.6 in spotlight. nothing is listed in spotlight under camera raw 4.6, but all my images are listed in the spotlight if I search for camera raw 4.0! I can not open either in Bridge or Photoshop CS3 I just receive the error message 'could not complete this request because photoshop does not reconize this type of file'. any help would this is greatfully appreciated. Thanks

Well if you have a fairly new Nikon camera PS CS3 will not have the proper version of ACR to support that camera.
You could use the Adobe DNG converter to convert the NEF files to DNGs or you can update PS to a newer version that does have support for newer cameras or you could buy Adobe Lightroom V4 which also has support for the newer Nikon cameras.

After having to reinstall my drive with applications I get a message with Premiere Pro CS5 that it can't find any "capable video play modules" and asks me to "update" my "video display modules". How do I do this? I am using a mid-2010 iMac 27" with 10.7.3

After having to re-install my start-up drive recently I am getting a message with Adobe Premiere Pro CS5 that it can't find any "capable video play modules" and asks me to "update" my "video display modules". I am using a mid-2010 iMac 27" with OSX 10.7.3. How do I do this?

Premiere is an Adobe application and is supported in their forums.
Good luck.
x

Canon EOS 5D Mark II with Adobe Bridge (CS4) and Camera Raw 5.4

I use a Canon EOS 5D Mark II and store in RAW-format.
The camera is updated with latest software etc.
I have the Adobe Design CS4 package on my computer and updated to the camera raw 5.4 version (bridge/photoshop/etc).
All this is updated to last versions / updates etc.
I upload my pictures from the camera to my computer.
When I inspect the files with the Canon software such as "Digital Photo Professional 3.6.1.0" or "Canon Utilities ZoomBrowser EX 6.3.1" (this are the latest versions and updates) the files are copied correct to my computer.
The files can be opened with the canon software without any problem and can be modified and converted and all normal operations can be performed.
The files can also be converted to ".jpg" and no problem occurs.
The problem starts after the folder with the pictures (in RAW-format) has been opened / viewed in Adobe Bridge or after Adobe bridge is started.
After starting and viewing with bridge the folder only some of the file become corrupted and cannot be used anymore.So the majority of the files remain OK but some files become corrupt.
A part of the picture is visible partly, the remaining part are lines, dots, squares etc and the divisions of correct picture and corrupted seems to be at random. There is no structure in the way the corrupted file are shown in bridge. Please look at the enclosed picture in this message.
The files can be opened in Camera Raw and Photoshop but they show the corrupted file and can be stored etc.
But the picture is destroyed.
Does anybody have a sollution or similar problems?
Best regards

There are forums for Bridge, Camera RAW and Photoshop.
Any of them would be better than posting here.
Bob

Can not open Camera Raw in Bridge CS4, or see thumbnails

MacBook Pro
OS 10.5.5
Photo Shop CS4 version 11
Camera Raw 5.2.0.65
I had another version of Camera Raw from PS3. When I bought the Canon EOS 5D Mark II, I deleted the old camera raw plug in, so as to not conflict with the new camera raw plug in.
When I open PS4, click Photoshop, click about plug in, ONLY one version of Camera Raw comes up.
In OS 10, when I click GO at the top, then applications, then Adobe Photoshop CS4, then Plug Ins, then File Formats, I get two Camera Raw icons: a blue lego like icon that says "Camera Raw.plugin" and another icon that looks like the Macintosh HD icon, but is labeled "CameraProfiles.dmg"
The problem is that I can't open files in Camera Raw when in Bridge CS4, nor can I see the little photo thumbnails either.
Can someone please help?
Desperate in NYC.

The Photoshop folder is NOT the correct location for the Camera Raw plug-in, since several versions of Photoshop.
The correct location, is, as described in the readme and in the FAQ of this very forum [hint]:
Mac: [root of your hard disk, NOT your user folder's library]/Library/Application Support/Adobe/Plug-ins/CS4/File Formats/

Bridge CS4 and Nikon 7100 raw files

Well, I use normally Bridge CS4 (that was included in Elements 8) to organize my pics and to edit or open in camera raw of Elements 11. I normaly shot in raw format with my Nikon d90. Now I shoted some pics with the new Nikon D7100 and I can't use Bridge CS4. I tried to update but Bridge doesn't work. So now I'm obliged to use Elements 11 organiser. Any possibiity to update Bridge CS4?

Adobe products use Adobe Camera Raw (ACR) in various ways. Adobe does not work at, or promise, ACR will work in older or legacy versions of anything. Your 7100 is a brand new model and included in ACR 7.4 and 8.0. Whatever Adobe products you use will have to be upgraded to the latest ACR. With PSE and organizer 11, you have to install it and upgrade with Help > Updates to get 7.4.
It amazes me that people will invest so much in a new camera and its new features without giving any thought to the software they use to support the new camera and features.

Can i send email directly from bridge cs6 and cc ?

hi
can i send emails directly from bridge cs6 or cc directly from bridge?
i found this scripts http://kb2.adobe.com/community/publishing/894/cpsid_89450.html
but i run cs6 and cc under windows 7 sp1 64bit and windows 8.1 64bit
and i have thunderbird email client
is there a way to make it work?
maybe i can install another email client
thanks

// consult MAILSEND in here: https://github.com/muquit/mailsend and download the app 'mailsend.exe' for windows7 in here:
// https://github.com/muquit/mailsend/releases/download/1.17b15/mailsend1.17b15.exe.zip
// unzip it and put the app .exe where you want to use it.
// I have tested using Bridge to send e-mail using my gmail e-mail account and it works. I only needed to
// I needed to send e-mails from Bridge using my google account, but first I needed to put on my network the app 'mailsend.exe'(i'm using PCs windows7 , CS6 and a network)
// All my 20 people team is using it, so I decided to put the app 'mailsend.exe' on a common place on network. I you are using it only on 1 PC you don't need you can put it on its disk.
// Solution: All you need is to create a bat file that tells 'mailsend.exe' what to do:
var mailsendBat=File(Folder.temp +"/mailsendBat.bat"); // creates a bat file on the temporary folder
mailsendBat.open("w")
// the place where app 'mailsend.exe' file is
mailsendBat.writeln('"X:\\[someFolder]\\mailsend.exe" \^');
// my gmail
mailsendBat.writeln('-t [email protected] -f [email protected] \^');
// the title can have encoding or not (-enc-type "base64")
mailsendBat.writeln('-cs "utf-8" -mime-type "text/plain" -enc-type "base64" -sub "Ich lerne seit ungefähr zwei Jahren Deutsch" \^');
// this works for the smtp gmail
mailsendBat.writeln('-starttls -port 587 -auth -smtp smtp.gmail.com -user "[email protected]" -pass "[myPassword]" \^');
// If I want to send an image attachment I use this 1, 2, or more times. If content-type is "multipart/mixed" the inline images don't work. Instead the images will be sent as attachment.
mailsendBat.writeln('-content-type "multipart/mixed" -attach "C:\\Users\\Public\\imagens\\myImage.jpg" \^');
// this is the line to send a simple text line with no encoding specified
mailsendBat.writeln('-enc-type "none" -mime-type "text/plain" -M "one line attachment 1" \^');
// you can sen inline html that can also have links to inline images
mailsendBat.writeln('-mime-type "text/html" -enc-type "none" -M "<b>this is a test</b><br><img src="http://[any_online_image.jpg],image/jpeg,i">" \^');
// sending text line with special encoding
mailsendBat.writeln('-cs "utf-8" -mime-type "text/plain" -enc-type "base64" -M "Ich lerne seit ungefähr zwei Jahren Deutsch" \^');
// endind it
mailsendBat.close();
// executing
mailsendBat.execute();
// there are also other kind of commands (consult https://github.com/muquit/mailsend)

Can I save my preferences in Bridge CS4?

I regularly back up my Photoshop CS4 preferences file (Adobe Photoshop X64 CS4 Prefs.psp). That way, if I have to trash my current prefs because Photoshop has gone haywire, I can simply copy the last good backup to the [Users...] folder, and I don't have to change absolutely everything to the way I like it.
Is there a way of saving Bridge Prefs files? I need to reset my Bridge prefs every couple of weeks, when the Tools, Photoshop... menu item disappears, and it takes a bit of time to rearrange my workspaces, and especially to set up my Favorites list. I'd really love to know a way of saving the Favorites list for reinstallation. Is there a registry key I could save?
Mary

Hi John
I'd already tried saving the stuff in C:\Users\Username\roaming\Adobe\Bridge CS4 (in Windows 7, same location as Vista64) and copying it back after resetting Bridge prefs - trying the files one by one to see the effect. None of them did what I wanted: to restore my Favorites, and things like my highlight color, my customized workspaces, etc.
Last night I trawled through the Registry and found the key HKEY_CURRENT_USER\Software\Adobe\Bridge CS4\Preferences. It was all there - highlight color, favorites list, etc. I looked at each value, comparing with Bridge in my laptop, which still has its 'Tools, Photoshop' menu item.
I found the value 'DisabledScripts'. It read:
GallerySheet
VersionCue
VersionCueSDKLoader
AutoStacks
photoshop
bridge-3
In my laptop, the 'photoshop' line wasn't there.
I backed up the Registry in my desktop and removed the 'photoshop' line from 'DisabledScripts'. When I opened Bridge, 'Tools, Photoshop' was back.
I lose it almost every time Bridge crashes, which it does every couple of weeks - and I do use the 'Tools, Photoshop' submenu items a good deal. So now I have a way of restoring it without spending 15 minutes to half an hour setting up my Prefs from scratch.
I've got 2 possible strategies:
- open the registry, where I've now saved the Bridge Preferences key as a favourite, and delete the 'photoshop' line from 'DisabledScripts', or
- export the whole key 'HKEY_CURRENT_USER\Software\Adobe\Bridge CS4\Preferences' when Bridge is in a fully functional state, and apply it when Bridge goes wonky.
Either of them will take about 2 minutes - a great improvement!
Best wishes
Mary

Can't open .cr2 files in Bridge CS4 v.3

Been browsing for hours; can't find the right answer...
I just purchased a Canon 60D, which shoots .cr2 raw files. They won't open in Bridge, which previously opened my Canon 10D .crw raw files. What do I need to do to make the .cr2 files open?
I'd rather not install Canon's Digital Photo Professional 3.10 (came with camera) if I can find a solution/upgrade within Bridge/PSE.
Details:
MacBook OS X 10.5.8
Bridge CS4, completely updated to v. 3 with Camera Raw v. 5.7 (which are the latest updates available, I think; just updated today).
Photoshop Elements 8
Thanks in advance.

Your CR2 files from the 60D are not supported for your version of ACR.
Each vendor uses different Raw type and sadly enough they use also a different raw type for each new camera the produce. Adobe offers free upgrade for those cameras, about 3 or 4 times a year. In the past they could not get the new Raw types earlier then the consumers so often this meant you had to wait for a period before the ability in ACR was there. Today they have a better relationship and often get pre production models so the updates are already there when the new cameras arrive on the market.
However being a commercial company they don't offer those upgrades for other then the latest versions of ACR and Photoshop. Currently CS6 and CC are both getting the updates but earlier version are not upgraded any longer.
Here is a list of the cameras that are supported and the minimum ACR versions needed for the cameras:
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
There is another option available and that is the free Adobe DNG converter. The latest version is here:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5596
Or if the link does not work do a search on Adobe.com your self. After the files have been converted to DNG you will be able to use them in your version of ACR.

Problem with JPGs Downlaoded with Nikon Transfer - Can't Apply Develop Settings in Bridge CS4 and ACR 5.3 Settings Don't Stick

Similar Messages

Maybe you are looking for