Problem with JPWR2 on a X99S GAMING 7

Hi,
Currently I have a problem with JPWR2 on a X99S GAMING 7 Motherboard. When I plug a 6 pin or a 8 pin on the JWPR2 the motherboard crash and the cable overheat or short-circuit. My power supply is a 1000W SIlent pro bronze. I tested with a new cable on another port on the power supply but it doesn’t work. I tested with without CPU too but still the same problem.
Can someone help me ?

you are using the Cooler master 1000W silent pro bronze right?
Normally the power supply should have 4 pin or 8 pin, the 6pin/8pin is normally for the VGA card and not for the Motherboard.
Please double check again and use the 4 pin or 8 pin for the MB.

Similar Messages

Sound Problem With new motherboard Z87-G45 Gaming

2 days ago i bought a new motherboard msi Z87-G45 Gaming ,
when i started playing my favorite game (cs go) i noticed that the sound at the left and right are louder(way louder it even hurts me ears )
and the sound at the front and the back are just normal, i also noticed that quality of the sound is worse , so im wondering if the onboard soundcard is broken or has it to do with something else?
and yes the Realtek Hd Audio driver is installed
im using the onboard soundcard Realtek ALC1150
and the headset Siberia V2 Steelseries
I am new to the forum if i posted this in the wrong section or something i apologize
i also like to apologize for my bad english.

>>Posting Guide<<
Apart from Realtek you could install Sound Blaster Cinema.
Try to reinstall the drivers >>Realtek Downloads<< with the latest available.
Try different headset/speakers.

Problem with X99S GAMING 9 AC - PCIE-PORT reporting V1.1 same with SLI

Yeah as the topic is saying, I got issue with my PCIE 3.0 ports, they are saying my grafic cards are running at x8 1.1
I should first mention that I had these issues for a while, and I also updated all drivers to the latest versions, but still same issues. I got the 1,4 bios version for the motherboard and the nvidia V344.65 that was released today.
I tried to change it in bios from auto to gen 3 on the PCIE-ports, but still same results.
I made a post earlier about that SLI running slow in WoW and 3Dmark Firestrike. Maybe this is the source to the issue due to the ports running at 1.1 and not 3.0?
Also, in both WoW and 3Dmark Firestrike, I get much higher FPS and results with just one grafic card activated, when I go into SLI the results drop like a rock..
The weird thing about SLI though, that it seems to work okay in games like Diablo 3 ROS and 3Dmark11.
I have my grafic cards in the recommended PCIE-ports, 1 and 4.
Here is a screenshot how it looks like in GPU-z:
Is this a known issue and is there any upcoming fix to this? Feels really bad I can't use my grafic cards to their fullest potential..
My whole computer setup:
Intel i7 5820K | MSI X99S Gaming 9 AC (bios 1.3) | SLI MSI GTX 980 Gaming 4GB | Samsung 850 Pro 512 GB | WD Red 4TB | G.Skill Ripjaws DDR4 3000MHz 4x4GB | EVGA SuperNOVA P2 1000W | Noctua NH-U14S PnP | Fractal Design Define XL R2 | 5 Noctua NF-A14 PWM 140mm fans | Windows 7 Pro 64 bit

Quote from: Svet on 12-November-14, 23:58:15
its probably because the render test doesn't handle or don't support SLI well and second card become back to idle
run something else apps., bench or games who support SLI well then check their modes
Enable sli load balancing if needs from nvidia control panel to check SLI utilization
Seems to work the correct way when I start a game, but still got issues with WoW and 3Dmark firestrike. My results with SLI is far worse then with just one single card activated. Anyone know why?
I get more FPS from WoW with one card then two, and I get much higher score in 3Dmark firestrike with just one card..

X99S GAMING 9 AC Not booting - Debug 94 code - Issue with GTX 980 SLI in WoW

Hello, I bought the X99S GAMING 9 AC motherboard but have ran into some issues.
The computer won't boot when I put my second MSI GTX 980 Gaming 4 GB card in the last PCEI 3.0 port (PCIE port 5) and I get the debug LED message 94 on the motherboard. I have a SLI setup.
The first card I have in the second PCIE 3.0 port due to the Noctua U14S CPU fan takes up space for the first slot. So I have been running my grafic cards in PCIE slot 2 and 4 with some issues.
First the card in slot 2 gets really warm over 86 celsius. And second: SLI runs really poorly in World of Warcraft. I get a lot higher performance with just one card activated. I am not sure if it's cause I am not running my cards in the recommended PCIE 3.0 ports or because WoW has some issues with SLI, but I heard other people have no issues at all with WoW in SLI.
I got the same issue with 3Dmark firestrike, the cards perform really poor in SLI. I get higher score with SLI turned off..
Though SLI seems to run pretty well in 3dmark 11 and Diablo 3 Reaper of Souls.
But the main issue right now, is that the computer won't boot with the grafic cards in PCIE port 2 and 5. The solution to run them next to each other is not good, cause it gets really hot and I get bad performance in WoW and Firestrike.
Picture of my setup before I switched places with the grafic cards as you can see, it is really tight:
Any upcoming bios updates (got v1.3) that will solve this issue on the horization? Hopefully this get sorted out really soon..
My whole computer setup:
Intel i7 5820K | MSI X99S Gaming 9 AC (bios 1.3) | SLI MSI GTX 980 Gaming 4GB | Samsung 850 Pro 512 GB | WD Red 4TB | G.Skill Ripjaws DDR4 3000MHz 4x4GB | EVGA SuperNOVA P2 1000W | Noctua NH-U14S PnP | Fractal Design Define XL R2 | 5 Noctua NF-A14 PWM 140mm fans | Windows 7 Pro 64 bit

You must use the recommended PCIE slots as the manual says for your CPU type, PCIE #1 and PCIE #4 if I remember, just open the manual :P for optimal 2Way SLI, also your 5820k will limit to 28 pcie lanes only if you plan to add more vgas...the other problem is your giant CPU air cooler blocking PCIE#1, do a favor to yourself, buy a watercooler for your 5820k and your problems are gone, add some overclock in your system, low noise and better temps.
Here I use 3x980 in SLI with X99S Gaming 9 AC, going soon to WC the VGAs with EK blocks.....3way is far more temperature critical than 2way spaced one.
Cheers

Msi x99 gaming 9 ack problems

ok got my new msi x99 gaming 9 ack with i7 5930k and g.skill 2400 ram
got my corsair ax1200i
so my problems i have been working on this all night near enough but today we have progress.
so problem is when i put ram in slot 1 would not post debug 04/55/60 no keyboard or signal to monitor. so i have finally got it working and got into the bios by put just one stick in slot 5. tried all 4 sticks in slot 5 but one failed at 6f so i think now one stick is faulty. but back to main problem with slot one.
once i had it booting up i switched off system and added 1 stick in slot one.
and it would not post debug 04/55/60.
so do i ram it or do you think bios update will fix this problem thanks in advance

Last night the exact same problem occurred to my Gaming 9 ACK.
Board worked flawlessly for three months with a 5960X processor, quad channel G.Skill 3.33 memory ( 16gb- 4x4 ) and four msi GTX980 gaming in quad sli mode.
Turned off the pc last night, and today, upon start the pc did not boot.
04-55-60-04 and all over again.
Memory modules are populated in slots 1-3-5-7. After several try and error efforts, slot 7 is blocking the system from booting. All four modules checked and are fine.
Removed module in slot 7 and booted. No problem there.
After entering windows 7 environment, a second even bigger surprise surfaced.
NO SLI. Device manager sees only gtx980 in slot 1 and nothing else.
New tests.
Only pci-e slot 1 works. All others are non functional.
So I am with an 8000$ pc, which works with 12gb triple channel memory and one VGA.
Obviously motherboard has gone south.
What now ???

X99S Gaming 9 ACK - power supply compatibility - JPWR2 and JPWR3- Status code 00

Hello,
Setting up a newly purchased X99S Gaming 9 ACK, and would appreciate any help. Can't get past status code 00 and am in debug mode.
First step in my debug process, I'm trying to confirm power supply requirements. The board has two 12V input connectors - JPWR2 and JPWR3. The manual mentions them both. However, my power supply only has one 12V "EPS12V" cable with an 8 pin connector that can be separated into 4+4.
A quick search did not turn up any power supplies that come stock with two 12V cables. This seemed odd, so I searched for information for JPWR2 and JPWR3 hoping to find something and what turned up was somewhat contradictory. Some info out there seems to suggest that powering one of the two would be OK if not overclocking. So I tried that - first just JPWR3, then split the power connector and did just JPWR2, then did JPWR2 and part of JPWR3....and then just to confirm what I thought I was seeing (that 00 status is telling me the CPU's not active) I removed everything from both JPWR2 and JPWR3. In all cases, the status code was 00.
So I'm looking to find out how folks with this MB actually working have connected the power.
Question 1: Does anyone run it without having both JPWR2 and JPWR3 connected? If so, what approach do you use?
Question 2: Does anyone run it having them both connected? If so, please let me know what power supply you use. I am guessing maybe a configurable cable sort could be set up with two 12V lines?
I know, it's possible with no known-good components (well, the power supply is freshly removed from a happily functioning PC, so it's not suspect) I may have either a bad CPU or a bad MB. And they are both brand new and eminently returnable. But I don't want to do that till I know I've got them powered correctly. I'm relatively confident (well, hopeful) that having the correct power supply setup will let me get past 00 status code and see what else I get to debug.
Thanks in advance for any and all help.

Thanks for the input. Reset CMOS, removed all but the first stick of RAM. No change. Status code 00.
Initial PS was the Corsair TX750W. I got another power supply to test that has cables to fill both JPWR2 and JPWR3. No change. Status code 00.
So, apparently a DOA Motherboard. Was afraid of that. Sending it back to try again.

Hey i have problem white msi x99s gaming 7 main board led debug cod 04

hey me is Jacob. and i have thes problem White me msi x99s gaming 7 that i get code 04 in the led debug when i power it up and then it whont boot up as normal and it stands on the code 04 in the led debug on the motherboard and it just came Yesterday. and it have been runing for 7 months White no problem and that is that i have the time I have had it in. and when the led debug code 04 in the manual it say power on south bridge initiation. me bios version on me msi x99s gaming 7 is H.90

Board: MSI x99s gaming 7
Bios: Version H.90
VGA: MSI 970GTX gaming 4g, MSI 750TIGTX GAMING 2 GB
PSU: Cooler Master G750M, 750W PSU
Intel Core i7-5820k Intel® Haswell-E 3.3GHz (3.6GHz Turbo Boost) LGA 2011-v3
MEM: Crucial DDR4 16GB 2133MHz Quad-channel KIT
HDD: samsung 840 evo 120gb SSD and Seagate® Desktop SSHD 1TB
COOLER: Intel TS13A Air Cooler
OS: Windows 8.1 64bit Professional
i have tried:
1. Tested power supply with a Thermaltake power supply tester, all voltages are within range, including the CPU power connector, which i did double check to be plugged in.
2. Tried the video card in another PC, working fine, also tried it in each pci express slot (four of them) on the MSI X99S GAMING 7 board.
3. Tried resetting the bios and have also tried booting with just one memory stick in Dimm slot 1
4. Tried powering up the board out of the case with just the power supply, video and memory connected.
and it still get the samme problem as before and still stand on code 04 and still not boot up.

Problems with pacman applet, and advice on a gaming portfolio

Hi
I recently made a pacman applet, im having a few problems with it though, the first time the applet is run on a browser, the ghosts(represented by squares) often dont appear or if they do, they are stuck in walls, this never happens when i run offline on my computer. Is this because the very first time the applet is run, it doesnt load properly, but the second time some of the files are in the cache so it loads fully?
Also everytime i refresh the browser the applet dissapears and is replaced with a blank space and a cross in the top left hand corner, does anyone know the reason for this?
The applet can be found below, if you do decide to play it, please bear in mind what i have said, so it might not load correctly the first time, if this is the case please refresh, or close the broswer and reopen the link! Also you will need to click the applet for it to gain focus before you can move pacman - use the arrow keys the control pacman.
http://www.renaissance-designs.co.uk/Satwant/java/pacman/
Id also be very gratful for some advice - id like a change in career, ive always wanted to get into gaming, ive had some previous knowledge in java i made a programme that could generate its own poetry in java for my dissatation, but i still never had a huge amount of confidence, and so went into websites.
BUT now i have decided to take the leap back into programming and give it a go, which is why ive made this game.
I thought id make a portfolio and try and apply for a few gaming jobs. This applet took me two weeks to make and it was in my spare time, i am fully aware its not perfect, and it doesnt look great, but i would like to know what people think of it, also how many more games do you think i should make, before i apply for gaming jobs? Does anyone have any advice on what would make a good portfolio for a java gaming job?
Thanks alot, i look forward to what you think of the game, and your advice!
SSKenth

sskenth wrote:
Thanks for getting back to me with that information, i didnt know you could see that information with just a simple right click!
But im afraid that doesnt really help me solve the problem, im not sure what all of that information means! :SI have very little experience with applets, but I can tell you what I would do to debug this (forgive me if you already know this stuff).
Look at the stack trace you get in the Java Console that I posted earlier. Each line contains a method that was called from the method on the previous line. So, java.lang.Thread.run() called sun.applet.AppletPanel.run(), which called Room.init(), etc. Look at the topmost line whose method is something you wrote, not something in the standard Java libraries. In your case it looks like PaintSurface.java (specifically, line 22). Look at what line 22 of PaintSurface.java is doing, it's calling Thread.start(). If you check out the Javadoc for Thread.start(), it says IllegalThreadStateException gets thrown if you call start() on a thread that has already started. So that's your problem. Without looking at your code, I'd assume you want to stop your thread in your applet's destroy() override, and instead of reusing it, create a new one each time init() is called.
Ill try and look into, thanks again though, it gives me somthing to work with :D
Btw when you first ran the applet, did all the ghosts(3) load up correctly?Unfortunately, no. The first time I ran it, there was only 1 ghost (or maybe all 3 overlapping each other?) at the top of the screen, and they never moved. Refreshing once made the game play as I think you want it to. Refreshing a third time gave the dreaded red X.
...oh and just out of curiosity,,, did u have fun playing the game :DSure did.

Problems with MSI X99S MPower

My setup:
- Corsair Cooling Hydro Series H100i GTX
- Corsair RM850 850W 80 Plus Gold Modular
- G.Skill Ripjaws 4 DDR4 2133 PC4-17000 16GB 2x8GB CL15 Roja
- Gigabyte GeForce GTX 660 OC 3GB GDDR5
- Intel Core i7-5930K 3.5Ghz Box
- MSI X99S Mpower
Here is my problem so far:
At first I thought it might be a ram problem, but after doing a CDOS, I was able to boot with 4 RAM sticks to windows, using my SSD.
However, after I resetted and connected my other two HDDs, the computer doesn't boot.
Now, the computer will only get past the Boot phase if there's no hardrives attached, (Doesn't matter if it's one of the empty ones, or the SSD, or another HDD from another computer with windows in it that works)
I wont even get into the splashscreen!
I am unsure as to what might be causing this problem or how to solve it, I am not tech savy, and honestly, after the problems last computer gave me, I thought my bad luck was out and than building this one would be a breeze!
I suspect the MOBO might be defective, since it's weird that it gets past bootphase alright, but doesn't accept any SATA devices.
I tried to change the cable 3 times, (PSU one, and SATA cable) even to a different version that didn't come with the MOBO, I also tried two hardrives, an SSD and an HDD but neither will let me get to splashscreen if connected to the Motherboard.
I need all the help I can get! Thank you!

Quote from: david.domingo.xammar on 05-April-15, 01:47:29
Not sure how I update that SSD Firmware thingie
Due to problems with 840 EVO Samsung released Samsung SSD 840 EVO Performance Restoration Software, it will also update firmware:
http://www.samsung.com/global/business/semiconductor/minisite/SSD/downloads/software/Samsung_Performance_Restoration_V11.zip
On which bios version is the board?

Router problems with online gaming

Hi,
I have problems with online gaming. My router is Linksys wrt54g2 and modem is ZTE ZXDSL 831AII and with two computers. I can't play any onlines game for example Counter-Strike 1.6 or Counter-Strike: Source. When I'm trying to connect in those games servers when it loads too bars I'm geting error that says: "Connection failed after 4 retries". Also I can't play StrongHold, Combat Arms and Battlefield2. I try to bypassing my router by connecting computer directly to my modem and games works. What I should do? Please help me.

Do you have problems with web browsing or other online applications? If not, the problem may lie with the games themselves. It's possible the games require ports to be forwarded to work correctly. Check the game documentation and see if this is the case.

MSI x99s Gaming 7 problem

Hey guys, 1st time PC builder having one minor problem. I don't know where to plug in my case's power sw, reset sw, HDD led, power led+, and power led- connectors. Everything else was pretty easy except these ones. Any help would be greatly appreciated.

There should be some guides in the manual...
http://www.msi.com/support/mb/X99S-GAMING-7.html#down-manual

Msi x99 gaming 9 ack does not detect capture card when using with xsplit

msi x99 gaming 9 ack does not detect capture card when using with xsplit
i install every but still it does not work.

Hi
It wasn't hard to find your motherboard version:
http://www.msi.com/support/mb/Z68AGD80_B3.html#down-bios
Since your BIOS is v20.1, it couldn't be G3
Apart from checking BIOS, you can only check motherboard or moth...

Gaming-Graphics problem with MacBook White Unibody (Late 2009)

Hello there, this is going on:
When I open any game (like call of duty 4) it seems to work ok, 90-125 fps as it should be (800x600 minimum graphics), and this happens the first 5-10 minutes i'm playing, then it starts to seriously lag itself, FPS goes down to 30-40 fps with a veeery poor performance, unplayable, for like 5-10 minutes, and then it starts to work fine again. I can't exactly explain it, but I don't see the fans running faster, they stay steel, the MacBook starts to heat a little and that's all I can tell.
I though this was a Mac OS X problem with the video card, but same thing happens on Boot Camp, with Windows 7, with ANY game i'm playing. Then I tried to restart the PRAM and SMC, but I don't have any solution.
Is this a Hardware problem? Is this happening just to me or is there anybody who has this problem, too? Help! and thanks in advance.

I have had this problem for the last year with iRacing and lately F1 2010.
In good news, I seem to have solved it last week. I did some googling and saw a few posts that suggested it could be due to the GPU overheating. To test this I downloaded and installed Speedfan in windows and smcFanControl in OSX.
Both apps will enable you to monitor the temp of your CPU and GPU. I noticed generally in OSX the GPU hits a max of around 72 degrees Celsius. When I switched to windows and fired up iRacing and then F1 2010 I noticed it was all fine till the GPU hit around 90 degrees Celsius. At that point it the FPS drop kicked in and I went from 70 odd FPS in iRacing to 20 FPS.
To get around the problem, You can turn up the fan speed, which will stop the GPU from getting so hot. Unfortunately for a reason I don't understand SpeedFan will not allow you to control the speed of the fan in windows. So you need increase the speed to 5000 - 6000 RPM using smcFanControl in OSX. If you restart then fire up Windows the fan speed will stay at the higher rate you have set.
Since I started doing that my FPS drop problems seem to have disappeared.
The problem is if you then put windows to sleep, when you wake it up again the fan will go back to the default speed. So if you need shut the lid of your laptop, you have to restart to Mac OSX, then set the fan speed, the restart to windows. Painful but better than FPS drops.
If anyone has any other thoughts on any of this stuff I would love to hear it.

Disconnection problems with online gaming - world ...

Other users on BT have alos reoported issues with game hangs and diconnection issues with World of Tanks.
They seem to have started a few days ago. Someitme it is intermittant other times it can last for several minutes.

Having the same issue since yesterday 6th September 2012.
World of Tank client keeps disconecting, then has issues logging back in to the client.
This seems to be hapening to a lot of other players in the UK all on BT
http://forum.worldoftanks.eu/index.php?/topic/149124-lag-and-disconnection/
BT had the same problem with World of Warcraft recently, something to do with a BT peering issue. I can only hope this problem is sorted soon.
No other internet activity is affected.

MOVED: MSI x99s Gaming 7 problem

This topic has been moved to GAMING Motherboards.
https://forum-en.msi.com/index.php?topic=184649.0

There should be some guides in the manual...
http://www.msi.com/support/mb/X99S-GAMING-7.html#down-manual

Problem with JPWR2 on a X99S GAMING 7

Similar Messages

Maybe you are looking for