Problem with K8N - Disk Read Errors
Hey folks,
I am really at wits end here...
I just recently trashed TWO 160GB seagate SATA drives AND an Abit KV8-MAX3 motherboard and replaced them with a MSI K8N Neo Platinum and ONE Maxtor 160bg SATA drive...I did this because I kept getting constant crashes until one day it crashed and BOTH drives failed.
Well, I reassembled the "new" pc on friday and it's been running GREAT until this morning. This morning I go into my office and I hear a very low volume beep(I'm not even sure it was from the pc speaker..do HDDs beep?). I tried to bring up the display but the computer is locked up. Ctrl-Alt-Del doesn't work and power down doesn't work so I hit the reset switch...
I now get a Disk Read Error!!! (Note, this is what happened to the other two drives in the othe board too)
I only tried to reboot once and haven't tried any other diagnostics yet but I wanted to get some ideas before I start digging into the system again. I am close to trashing the whole system and just buying some crappy Dell or other pre-assembled crap. Please convince me not to go this route.
My complete system setup is as follows:
MSI K8N Neo Platinum
Antec Neo Power 480 PSU
2x Crucial CT6464Z40B 512MB, DDR PC3200, CL=3, NON-ECC, UNBUFFERED
AMD 3200+ NO-overclocking!
ATI Radeon 9800 Pro 256MB AGP
Sound Blaster Audigy2 Pro Platinum
Maxtor Diamondmax 160GB SATA on SATA1
Plextor PX-712SA in SATA 2
Windows XP SP2
Latest MSI BIOS and drivers
The system is NOT overclocked. I have pretty much left the bios alone except to disable onboard audio, floppy and IDE controllers.
Hrmm, I think I did use the MSI cables for the SATA connections. I can get new cables, what do you recomend? How do I knwo a good cable from a bad cable?
The disk drive is in SATA 1
The DVD drive is in SATA 2
MB BIOS 1.5
System Drivers v.5.03
My complete system setup is as follows:
MSI K8N Neo Platinum
Antec Neo Power 480 PSU
2x Crucial CT6464Z40B 512MB, DDR PC3200, CL=3, NON-ECC, UNBUFFERED
AMD 3200+ NO-overclocking!
ATI Radeon 9800 Pro 256MB AGP
Sound Blaster Audigy2 Pro Platinum
Maxtor Diamondmax 160GB SATA on SATA1
Plextor PX-712SA in SATA 2
Windows XP SP2
Motherboard BIOS v.1.5
System Drivers v.5.03
Similar Messages
-
Satellite M45 with disk read error
My Satellite M45 has hung with a "disk read error" on reboot. I have tried cntrl-alt-delete but to no avail. I am loathed to use the recovery disk since it will reformat and I have a feeling my hard disk might be fried anyway.
Has anyone any knowledge on how I can restore this disk inexpensively?
Thanks
GIf you can't boot normally, hit the F8 key during boot up and see if you can get into Safe Mode. If not, running the Recovery CDs maybe the only option.
I would try to run the Recovery CDs even if I thought that the drive might be fried. What is the down side? If it works, you have a working computer. If it doesn't, you know that you were right and the hard drive needs to be replaced. -
Satellite Pro L300 - Disk Read Error
Hey, Lee here.
I'm currently having problems with my Satellite Pro L300,
Everytime I try and boot it up, it will come up with a 'Disk Read Error, Press CTRL+ALT+DEL to Reboot' this has been happening for a while, and i've tried using the Recovery Console with the 'FIXBOOT' command, but this isn't working, due to the fact that there is no OS installed. I've tried re-installing Windows Vista Ultimate, but it keeps giving me an error. Any help?To test the hard drive determine what brand of hard drive you have. You can check the Bios/Setup to find out or run SIW or Belarc Advisor. Go to that manufacturer's support site and download their Self Booting Diagnostic CD ISO image, create the CD using the Burn From Image option (see http://iso.snoekonline.com/iso.htm for more information on doing this), then boot to it and run the most exhaustive tests available. If you have a Toshiba drive you will need to use the Hitachi Drive Fitness Test as Toshiba doesn't supply their own. http://www.hitachigst.com/hdd/support/download.htm
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time. -
Equium U400-124 - disk read error
Hi guys
I have (had?) a Toshiba Equium U400-124 laptop with Vista Home Premium 32 installed.
Last night it just crashed, so I rebooted, and a message came up with "a disk read error occured, press ctrl+alt+del to restart".
This reappeared when I did the above.
I received no disks/dvd's with the pc when i brought it, so created a "vista recovery disk" on my desktop pc and tried it.
It says "windows is loading files", goes through the "egg timer" windows part, but then just hangs on a black screen (the arrow cursor is visible and moveable).
I left it all night after trying it a multitude of times, but still black.
Any clues?
I have read that I will need an original Vista disc to boot from?
RegardsHi
Can you access the advanced boot menu pressing F8? If yes choose repair my computer. Some files will be loaded and then choose the Toshiba recovery function and follow the screen instructions. Windows will be reinstalled now with the factory settings.
If cant access the advanced boot menu you must reinstall Windows using a Microsoft disk because you didnt burn the Toshiba recovery disk as yet (you had to do this yourself).
But as Eldoarado said you need the SATA drivers. Otherwise you cant install Windows because your notebook is equipped with an SATA HDD.
First download the drivers on the Toshiba page as Eldoarado suggested and then create a new Vista installation disk with these drivers. Therefore you can use vLite:
http://www.vlite.net/
Bye -
When login, i see a error message saying " there is a eminent problem with hard disk " smart check
G72-250US Notebook , Win 7 64 Home Premium,
Error :
When i login " There is a eminent problem with Hard disk, SMART check faled" ,Prmary hard disk self test failed .
Please help me with ths problemHi,
If this message is coming up in a black screen.
Then the harddrive in the system is about to go bad or already bad.
If you are able to boot to windows, FIRST BACKUP DATA.
Also run a startup test by tapping F2 as soon as you power on the system.
The smart test is a BIOS feature in most of the computer which is designed to keep cust informed if the HDD is about to go bad. But their are instances where the SMART will only let you know that the HDD is bad only when the HDD has bad.
More Info: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443317&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
Although I am an HP employee, I am speaking for myself and not for HP. -
How do you fix error message "There is a problem with Adobe Acrobat/Reader. (6:6)
How does one fix error message "There is a problem with Adobe Acrobat/Reader.
If it is running, please exit and try again. (6:6)http://www.essexinfo.net/queens-road-residents-association/assets/documents/village-voices is one example but a whole lot of the material which has been uploaded as pdf files over the last four years is now unviewable - if you click on the link you just get a black page. The main site url is http://www.essexinfo.net and our site is the Queens Road Residents Association. I have just gone through every link on the site and a number of links when clicked on will not bring up the material. I tried going into Adobe 10 on my computer and disenabling protected mode as was suggested on your forum and at first when I went back into the essex info site it seemed to have worked when I clicked on a link that had only produced a black page. However when I went back to test all the other links I found that the problem was still re-occuring. This is really weird as the site and my connections to it which I sometimes make by directly accessing the site and sometime via a link from our QRRA blog have always worked perfectly with no problems up to now. I downloaded adobe 10.1 on 8 March 2011.
I contacted essexinfo separately but they said everything seemed to be OK at their end working from within the system.
If you can help I would appreciate it.
Pat -
When i try to open docs in mail box i get an error msg : there is a problem with adobe acrobat/read
when i try to open docs in mail box i get an error msg : "there is a problem with adobe acrobat/reader. If it is running please exit and try again (1014:1014)"
I have the same problem also but solved with the solution from http://www.brain-cluster.com/blog/orange/2011/03/06/there-problem-adobe-acrobatreader-if-it-running-please-exit-and-try-again
-
Can any one help me with this problem??
Hi garryw,
What version of Reader are you using, and are you on Mac OS or Windows? Do you get the same error when you try to print other PDF files, or is the problem specific to one PDF?
For starters, please try the solutions listed in this thread: Re: There is a problem with Adobe Acrobat /Reader. If it is running ,please exit and try again.(0:104)
Let us know how it goes.
Best,
Sara -
Error: there is a problem with Adobe Acrobat/Reader If it is running, please exit and try again.
I keep getting this message when trying to open a file.
Error: there is a problem with Adobe Acrobat/Reader If it is running, please exit and try again.I have the same problem also but solved with the solution from http://www.brain-cluster.com/blog/orange/2011/03/06/there-problem-adobe-acrobatreader-if-it-running-please-exit-and-try-again
-
Error message: there is a problem with adobe acrobat reader. if it is running please exit and try a
error message: there is a problem with adobe acrobat reader. if it is running please exit and try again (0:104) How can I fix this?
Hi Claudio, Thanks for your assistance. I'm still confused. When I click on this site it tells me: To view this FTP site in Windows Explorer, CLICK PAGE, and then click Open FTP Site in Windows Explorer. I do not see "Page" on this list. There is a "pace"... though.
-
Error: "There is a problem With Adobe Acrobat/Reader..." What is .MST file??
I get the following error message and I looked it up in the knowledge base, and there was a solution for fixing the error message. However, I have no idea what they are talking about. I have downloaded the Customization Wizard, but I have no clue what the following means:
A) Create a new transform
B) Open your previously created .mst file
I went into the C Drive and opened Program Files. I found the Adobe folder, but I couldn't find an .mst file anywhere. Am I completely lost??? Below is the knowledge base solution:
Error: "There is a problem With Adobe Acrobat/Reader..." when you view a PDF in a browser (Acrobat and Adobe Reader 8 on Windows)
Issue
When you try to view a PDF in Internet Explorer, you see the error message, "There is a problem With Adobe Acrobat/Reader. Please exit Adobe Acrobat/Reader and try again." When you click OK to the error, the PDF opens outside of the browser.
Reason
When you use the Adobe Customization Wizard to create a transform for Adobe Acrobat 8 or Adobe Reader 8, and you choose the option to "Make Acrobat the default viewer if both Acrobat and Reader are installed", or "Make Reader the default viewer if both Acrobat and Reader are installed", an error occurs if the computer does not have Acrobat or Reader already installed.
Solution
Create a new transform and re-deploy Acrobat or Adobe Reader.
Start the Adobe Customization Wizard 8.
Open your previously created .mst file.
Under Installation Options, select "Installer will decide which product will be the default".
Save the transform.
Re-deploy Acrobat or Adobe Reader.
Additional Information
When you create a transform in Adobe Customization Wizard 8, the installation options allow you to set the default viewer for PDF files. "Installer will decide which product will be the default" is the default setting and should be used when you are uncertain if the target machine has a version of Acrobat or Adobe Reader that won't be removed as part of the installation process. When installed silently using this option, Acrobat will always be configured as the default viewer.I think you are headed down the wrong path. The Customization Wizard is what you use to push out Reader to several hundred computers. An MST is a package or transform file that is used to accomplish this task. Unless you are an IT person and are trying a deployment of Reader this solution does not fit your situation.
-
Reader X problem. I get following error message:There is a problem with Adobe acrobat Reader If it
I am recieving this message:
There is a problem with Adobe acrobat Reader, if it is running, please exit and try again (103:103).
I used to be able to open pdf files directly in Explorer now I just get a blank screen and Done. Can anyone help me please?http://www.essexinfo.net/queens-road-residents-association/assets/documents/village-voices is one example but a whole lot of the material which has been uploaded as pdf files over the last four years is now unviewable - if you click on the link you just get a black page. The main site url is http://www.essexinfo.net and our site is the Queens Road Residents Association. I have just gone through every link on the site and a number of links when clicked on will not bring up the material. I tried going into Adobe 10 on my computer and disenabling protected mode as was suggested on your forum and at first when I went back into the essex info site it seemed to have worked when I clicked on a link that had only produced a black page. However when I went back to test all the other links I found that the problem was still re-occuring. This is really weird as the site and my connections to it which I sometimes make by directly accessing the site and sometime via a link from our QRRA blog have always worked perfectly with no problems up to now. I downloaded adobe 10.1 on 8 March 2011.
I contacted essexinfo separately but they said everything seemed to be OK at their end working from within the system.
If you can help I would appreciate it.
Pat -
There is a problem with Adobe Acrobat Reader etc etc error code 103?? Help Please
Adobe Acrobat Reader issue as above - downloaded latest version again still issues. I am using an old Acer laptop with Windows XP which I only now use for printing
The etc etc refers to the usual standard message as follows - also re Acrobat I was merely repeating the message given.
'there is a problem with Adobe Acrobat Reader. If it is running exit and try again (103:103)' this was the exact message given. I had version 11.0.08 which I have now deleted and am using an earlier version 10.0.4 which seems to have resolved the problem for the time being -
Model: HP G62 Notebook PC
System ID: 1439
Product ID: WR444EA¤UUW
Warranty Start Date: 08/06/2010
Processor Type: Intel(R) Pentium(R) CPU P6000 @ 1.87 GHz
Processor Speed: 1870 MHZ
Memory Size: 4096 MB RAM
BIOS Date: 06/28/2010
BIOS Revision: F.0B
Serial Number {Removed for privacy}
Keyboard Controller Revision: 60.22
OS: Windows 7 - don't remember if 64 or 32 tbh (it's my GFs laptop)
Error:
Suddenly today, about 9 hours ago, the laptop froze while surfing normally on the net.. After a reset - done as followed: holding power button till computer shuts down, and power on again - the computer wouldn't start windows again, and only gives the message:
A disk read error occurred. Press Ctrl+Alt+Del to restart.
And will repeat the message after booting up with HP logo, and not enter Windows, time and time again if you press C+A+D
I've tried recovery system, but that didn't work, and I'ved tried CHKDSK and it found and said it repaired some errors but it still happens.
I then ran the start-up-test and in the end I got Failure ID 90DX6C-56S5S1-9XL03f-60S403 on Hard Disk 1.
I tried to Google it, and no results.
No recent system updates or anything new installed in a few weeks.Hi,
It would look like the Hard Drive is failing/failed, but try running the following test from the bios menu as it can provide a more meaningful error code.
Shutdown the notebook. Tap away at f10 as you start the notebook to enter the bios menu. Under the Advanced or Diagnostic tab you should find the facility to run a test on the Hard Drive. Post back with the details of any error messages.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
"Disk read error occurred" cannot even load System Recovery
Hello,
yesterday I powered on my computer, and it was almost froze, with only the mouse moving and even the task manager not showing up when called.
I first tried to make it go in standby, as I thought it was some program which didnt start as planned. After I closed the screen , the screen went black, but the pc continued to run. I then pressed the power button, shutting the system the hard way.
After that, I powered back the pc, which now only showed "Disk read error occurred, press ctrl+alt+del to restart" and obviously this wasnt the solution. I tried resetting the BIOS, then running the diagnostics on f2: it ALWAYS passes the test the first time, then if i try to run the diagnostics again, it says "NOT INSTALLED". I tried running the system recovery on f11, but the same "disk read error" appears.
I-ve already confirmed the problem lies in the hard disk itself {hitachi 750gb}, having plugged it in another notebook with an hitachi hard disk and still showing the same problem, while the other hard disk booted just fine in my HP.
I tried with a win7 cd, both recovering and installing a new version, but they both kept frozen for about 1 hour and did nothing.
I then made a bootable USB with Trinity Recovery Kit and after a quick diagnostic, it said boot partition has "unclean" windows files and tried fixing the problem, without success. I-m now writing from a bootable USB linux distro, because i cannot find a bootable iso oh hitachi recovery program, what should I do?
Is it possible the hard disk failed so bad for an uncommon closure of the system? It looks to me like some data got corrupted.
Please help me, as I-m an academy student and I use the PC for almost everything.
Thank you.I-ve booted Boot Repair 64bit and tried repairing the boot section... i even checked the boot infos and printed an info file, can someone answer what the actual FOG is happening here?
Spoiler (Highlight to read)
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 23Nov2014]
============================= Boot Info Summary: ===============================
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sda.
=> Windows 7/8/2012 is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 6.03 2014-10-06................................................2....0............A20 gate n
Boot sector info: Syslinux looks at sector 840 of /dev/sda1 for its
second stage. SYSLINUX is installed in the /multiboot
directory. No errors found in the Boot Parameter Block.
Operating System:
Boot files: /multiboot/boot-repair-disk-64bit/casper/vmlinuz.efi
/multiboot/boot-repair-disk-64bit/EFI/BOOT/grubx64.efi
sdb1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/BCD
sdb2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files: /Windows/System32/winload.exe
sdb3: __________________________________________________________________________
File system: vfat
Boot sector type: Windows 7/2008: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /Hewlett-Packard/BIOSUpdate/CryptRSA.efi
/Hewlett-Packard/BIOSUpdate/CryptRSA32.efi
/Hewlett-Packard/BIOSUpdate/HpBiosUpdate.efi
/Hewlett-Packard/BIOSUpdate/HpBiosUpdate32.efi
sdb4: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 2014 MB, 2014314496 bytes
48 heads, 47 sectors/track, 1743 cylinders, total 3934208 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 7,736 3,934,207 3,926,472 6 FAT16
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 2,048 206,847 204,800 7 NTFS / exFAT / HPFS
/dev/sdb2 206,848 1,042,102,271 1,041,895,424 7 NTFS / exFAT / HPFS
/dev/sdb3 1,042,102,272 1,058,879,487 16,777,216 c W95 FAT32 (LBA)
/dev/sdb4 1,058,879,488 1,465,145,343 406,265,856 7 NTFS / exFAT / HPFS
GUID Partition Table detected, but does not seem to be used.
Partition Start Sector End Sector # of Sectors System
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 8445-39EA vfat MULTIBOOT
/dev/sdb1 E48A3EB48A3E82DA ntfs System Reserved
/dev/sdb2 869E4B729E4B5A37 ntfs
/dev/sdb3 70C8-BABE vfat HP_TOOLS
/dev/sdb4 FA50FC5C50FC2155 ntfs Bananalandia
/dev/sr0 udf UDF Volume
/dev/zram0 c7af1e29-699f-4efa-a763-6bd4df3c5edf swap
/dev/zram1 ddfe2e88-60eb-4564-9f7f-a6a55d40cfa1 swap
/dev/zram2 744b5bbe-811f-43c5-b381-5f9723476774 swap
/dev/zram3 501bb243-bf9b-4346-a227-d10edf37dfda swap
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Jan 6 20:13 ata-HGST_HTS541075A9E680_JD12001W14AW4B -> ../../sdb
lrwxrwxrwx 1 root root 10 Jan 6 20:13 ata-HGST_HTS541075A9E680_JD12001W14AW4B-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Jan 6 20:13 ata-HGST_HTS541075A9E680_JD12001W14AW4B-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Jan 6 20:12 ata-HGST_HTS541075A9E680_JD12001W14AW4B-part3 -> ../../sdb3
lrwxrwxrwx 1 root root 10 Jan 6 20:13 ata-HGST_HTS541075A9E680_JD12001W14AW4B-part4 -> ../../sdb4
lrwxrwxrwx 1 root root 9 Jan 6 20:12 ata-hp_DVDRAM_GU90N_M83E1M80128 -> ../../sr0
lrwxrwxrwx 1 root root 9 Jan 6 20:13 usb-Generic_Flash_Disk_E5F27B91-0:0 -> ../../sda
lrwxrwxrwx 1 root root 10 Jan 6 20:12 usb-Generic_Flash_Disk_E5F27B91-0:0-part1 -> ../../sda1
lrwxrwxrwx 1 root root 9 Jan 6 20:13 wwn-0x5000cca760d011d0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Jan 6 20:13 wwn-0x5000cca760d011d0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Jan 6 20:13 wwn-0x5000cca760d011d0-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Jan 6 20:12 wwn-0x5000cca760d011d0-part3 -> ../../sdb3
lrwxrwxrwx 1 root root 10 Jan 6 20:13 wwn-0x5000cca760d011d0-part4 -> ../../sdb4
lrwxrwxrwx 1 root root 9 Jan 6 20:12 wwn-0x5001480000000000 -> ../../sr0
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sda1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sr0 /media/it/UDF Volume udf (ro,nosuid,nodev,uid=999,gid=999,iocharset=utf8,umask=0077,uhelper=udisks2)
=============================== StdErr Messages: ===============================
File descriptor 9 (/proc/1971/mounts) leaked on lvs invocation. Parent PID 9523: bash
File descriptor 63 (pipe:[28797]) leaked on lvs invocation. Parent PID 9523: bash
No volume groups found
ADDITIONAL INFORMATION :
=================== log of boot-repair 2015-01-06__20h12 ===================
boot-repair version : 4ppa14
boot-sav version : 4ppa14
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa14
File descriptor 9 (/proc/1971/mounts) leaked on lvs invocation. Parent PID 4571: /bin/sh
No volume groups found
boot-repair is executed in live-session (Boot-Repair-Disk 64bit 29nov2014, trusty, Ubuntu, x86_64)
ls: cannot access /home/usr/.config: No such file or directory
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/multiboot/boot-repair-disk-64bit/casper/vmlinuz.efi file=/cdrom/multiboot/boot-repair-disk-64bit/preseed/lubuntu.seed boot=casper cdrom-detect/try-usb=true noprompt floppy.allowed_drive_mask=0 ignore_uuid live-media-path=/multiboot/boot-repair-disk-64bit/casper/ initrd=/multiboot/boot-repair-disk-64bit/casper/initrd.lz quiet splash --
WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== os-prober:
/dev/sdb1:Windows 7 (loader):Windows:chain
=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: SEC_TYPE="msdos" LABEL="MULTIBOOT" UUID="8445-39EA" TYPE="vfat"
/dev/sdb1: LABEL="System Reserved" UUID="E48A3EB48A3E82DA" TYPE="ntfs"
/dev/sdb2: UUID="869E4B729E4B5A37" TYPE="ntfs"
/dev/sdb3: LABEL="HP_TOOLS" UUID="70C8-BABE" TYPE="vfat"
/dev/sdb4: LABEL="Bananalandia" UUID="FA50FC5C50FC2155" TYPE="ntfs"
/dev/sr0: LABEL="UDF Volume" TYPE="udf"
/dev/zram0: UUID="c7af1e29-699f-4efa-a763-6bd4df3c5edf" TYPE="swap"
/dev/zram1: UUID="ddfe2e88-60eb-4564-9f7f-a6a55d40cfa1" TYPE="swap"
/dev/zram2: UUID="744b5bbe-811f-43c5-b381-5f9723476774" TYPE="swap"
/dev/zram3: UUID="501bb243-bf9b-4346-a227-d10edf37dfda" TYPE="swap"
1 disks with OS, 1 OS : 0 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.
Windows not detected by os-prober on sdb2.
WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util sfdisk doesn't support GPT. Use GNU Parted.
WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== UEFI/Legacy mode:
This live-session is not in EFI-mode.
EFI in dmesg.
[ 0.000000] ACPI: UEFI 000000009cffd000 000236 (v01 HPQOEM 2166 00000001 HP 00040000)
SecureBoot maybe enabled.
=================== PARTITIONS & DISKS:
sdb1 : sdb, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sdb1.
sdb2 : sdb, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sdb2.
sdb3 : sdb, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sdb3.
sdb4 : sdb, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sdb4.
sdb : GPT, no-BIOS_boot, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: Generic Flash Disk (scsi)
Disk /dev/sda: 2014MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 3961kB 2014MB 2010MB primary fat16 boot
Warning: /dev/sdb contains GPT signatures, indicating that it has a GPT table.
However, it does not have a valid fake msdos partition table, as it should.
Perhaps it was corrupted -- possibly by a program that doesn't understand GPT
partition tables. Or perhaps you deleted the GPT table, and are now using an
msdos partition table. Is this a GPT partition table?
Model: ATA HGST HTS541075A9 (scsi)
Disk /dev/sdb: 750GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Number Start End Size File system Name Flags
Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0
has been opened read-only.
Error: /dev/sr0: unrecognised disk label
Error: /dev/zram0: unrecognised disk label
Error: /dev/zram1: unrecognised disk label
Error: /dev/zram2: unrecognised disk label
Error: /dev/zram3: unrecognised disk label
=================== parted -lm:
BYT;
/dev/sda:2014MB:scsi:512:512:msdos:Generic Flash Disk;
1:3961kB:2014MB:2010MB:fat16::boot;
Warning: /dev/sdb contains GPT signatures, indicating that it has a GPT table.
However, it does not have a valid fake msdos partition table, as it should.
Perhaps it was corrupted -- possibly by a program that doesn't understand GPT
partition tables. Or perhaps you deleted the GPT table, and are now using an
msdos partition table. Is this a GPT partition table?
BYT;
/dev/sdb:750GB:scsi:512:4096:gpt:ATA HGST HTS541075A9;
Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0
has been opened read-only.
Error: /dev/sr0: unrecognised disk label
Error: /dev/zram0: unrecognised disk label
Error: /dev/zram1: unrecognised disk label
Error: /dev/zram2: unrecognised disk label
Error: /dev/zram3: unrecognised disk label
=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sda1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=it)
/dev/sr0 on /media/it/UDF Volume type udf (ro,nosuid,nodev,uid=999,gid=999,iocharset=utf8,umask=0077,uhelper=udisks2)
/dev/sdb1 on /mnt/boot-sav/sdb1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sdb2 on /mnt/boot-sav/sdb2 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sdb3 on /mnt/boot-sav/sdb3 type vfat (rw)
/dev/sdb4 on /mnt/boot-sav/sdb4 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 sdb2 sdb3 sdb4 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd freefall full fuse hpet input kmsg log mapper mcelog mei mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sdb sdb1 sdb2 sdb3 sdb4 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom v4l vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sdb1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 ff 1f 03 00 00 00 00 00 |................|
00000030 55 21 00 00 00 00 00 00 02 00 00 00 00 00 00 00 |U!..............|
00000040 f6 00 00 00 01 00 00 00 da 82 3e 8a b4 3e 8a e4 |..........>..>..|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200
=================== hexdump -n512 -C /dev/sdb2
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 28 03 00 |........?....(..|
00000020 00 00 00 00 80 00 80 00 ff 0f 1a 3e 00 00 00 00 |...........>....|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 37 5a 4b 9e 72 4b 9e 86 |........7ZK.rK..|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200
=================== hexdump -n512 -C /dev/sdb3
00000000 eb 58 90 4d 53 44 4f 53 35 2e 30 00 02 10 16 20 |.X.MSDOS5.0.... |
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 38 1d 3e |........?....8.>|
00000020 00 00 00 01 f5 1f 00 00 00 00 00 00 02 00 00 00 |................|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 be ba c8 70 4e 4f 20 4e 41 4d 45 20 20 |..)...pNO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 33 c9 8e d1 bc f4 | FAT32 3.....|
00000060 7b 8e c1 8e d9 bd 00 7c 88 4e 02 8a 56 40 b4 41 |{......|[email protected]|
00000070 bb aa 55 cd 13 72 10 81 fb 55 aa 75 0a f6 c1 01 |..U..r...U.u....|
00000080 74 05 fe 46 02 eb 2d 8a 56 40 b4 08 cd 13 73 05 |[email protected].|
00000090 b9 ff ff 8a f1 66 0f b6 c6 40 66 0f b6 d1 80 e2 |.....f...@f.....|
000000a0 3f f7 e2 86 cd c0 ed 06 41 66 0f b7 c9 66 f7 e1 |?.......Af...f..|
000000b0 66 89 46 f8 83 7e 16 00 75 38 83 7e 2a 00 77 32 |f.F..~..u8.~*.w2|
000000c0 66 8b 46 1c 66 83 c0 0c bb 00 80 b9 01 00 e8 2b |f.F.f..........+|
000000d0 00 e9 2c 03 a0 fa 7d b4 7d 8b f0 ac 84 c0 74 17 |..,...}.}.....t.|
000000e0 3c ff 74 09 b4 0e bb 07 00 cd 10 eb ee a0 fb 7d |<.t............}|
000000f0 eb e5 a0 f9 7d eb e0 98 cd 16 cd 19 66 60 80 7e |....}.......f`.~|
00000100 02 00 0f 84 20 00 66 6a 00 66 50 06 53 66 68 10 |.... .fj.fP.Sfh.|
00000110 00 01 00 b4 42 8a 56 40 8b f4 cd 13 66 58 66 58 |[email protected]|
00000120 66 58 66 58 eb 33 66 3b 46 f8 72 03 f9 eb 2a 66 |fXfX.3f;F.r...*f|
00000130 33 d2 66 0f b7 4e 18 66 f7 f1 fe c2 8a ca 66 8b |3.f..N.f......f.|
00000140 d0 66 c1 ea 10 f7 76 1a 86 d6 8a 56 40 8a e8 c0 |.f....v....V@...|
00000150 e4 06 0a cc b8 01 02 cd 13 66 61 0f 82 75 ff 81 |.........fa..u..|
00000160 c3 00 02 66 40 49 75 94 c3 42 4f 4f 54 4d 47 52 |[email protected]|
00000170 20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00 | ............|
00000180 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001a0 00 00 00 00 00 00 00 00 00 00 00 00 0d 0a 52 65 |..............Re|
000001b0 6d 6f 76 65 20 64 69 73 6b 73 20 6f 72 20 6f 74 |move disks or ot|
000001c0 68 65 72 20 6d 65 64 69 61 2e ff 0d 0a 44 69 73 |her media....Dis|
000001d0 6b 20 65 72 72 6f 72 ff 0d 0a 50 72 65 73 73 20 |k error...Press |
000001e0 61 6e 79 20 6b 65 79 20 74 6f 20 72 65 73 74 61 |any key to resta|
000001f0 72 74 0d 0a 00 00 00 00 00 ac cb d8 00 00 55 aa |rt............U.|
00000200
=================== hexdump -n512 -C /dev/sdb4
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 38 1d 3f |........?....8.?|
00000020 00 00 00 00 80 00 80 00 ff 1f 37 18 00 00 00 00 |..........7.....|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 55 21 fc 50 5c fc 50 fa |........U!.P.P.|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200
WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/cow overlayfs 3.9G 6.2M 3.9G 1% /
udev devtmpfs 3.9G 12K 3.9G 1% /dev
tmpfs tmpfs 792M 1.2M 791M 1% /run
/dev/sda1 vfat 1.9G 628M 1.3G 33% /cdrom
/dev/loop0 squashfs 549M 549M 0 100% /rofs
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
tmpfs tmpfs 3.9G 8.0K 3.9G 1% /tmp
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 3.9G 0 3.9G 0% /run/shm
none tmpfs 100M 16K 100M 1% /run/user
/dev/sr0 udf 3.0G 3.0G 0 100% /media/it/UDF Volume
/dev/sdb1 fuseblk 100M 26M 75M 26% /mnt/boot-sav/sdb1
/dev/sdb2 fuseblk 497G 429G 69G 87% /mnt/boot-sav/sdb2
/dev/sdb3 vfat 8.0G 11M 8.0G 1% /mnt/boot-sav/sdb3
/dev/sdb4 fuseblk 194G 99G 96G 51% /mnt/boot-sav/sdb4
=================== fdisk -l:
Disk /dev/sda: 2014 MB, 2014314496 bytes
48 heads, 47 sectors/track, 1743 cylinders, total 3934208 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x2628973b
Device Boot Start End Blocks Id System
/dev/sda1 * 7736 3934207 1963236 6 FAT16
Disk /dev/sdb: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0xedc07a32
Device Boot Start End Blocks Id System
/dev/sdb1 * 2048 206847 102400 7 HPFS/NTFS/exFAT
/dev/sdb2 206848 1042102271 520947712 7 HPFS/NTFS/exFAT
/dev/sdb3 1042102272 1058879487 8388608 c W95 FAT32 (LBA)
/dev/sdb4 1058879488 1465145343 203132928 7 HPFS/NTFS/exFAT
No OS or WinEFI system
=================== Suggested repair
The default repair of the Boot-Repair utility would not act on the MBR.
Additional repair would be performed: repair-filesystems fix-windows-boot
=================== User settings
The settings chosen by the user will not act on the boot.
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 23Nov2014]============================= Boot Info Summary: =============================== => Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sda. => Windows 7/8/2012 is installed in the MBR of /dev/sdb.sda1: __________________________________________________________________________ File system: vfat Boot sector type: SYSLINUX 6.03 2014-10-06................................................2....0............A20 gate n Boot sector info: Syslinux looks at sector 840 of /dev/sda1 for its second stage. SYSLINUX is installed in the /multiboot directory. No errors found in the Boot Parameter Block. Operating System: Boot files: /multiboot/boot-repair-disk-64bit/casper/vmlinuz.efi /multiboot/boot-repair-disk-64bit/EFI/BOOT/grubx64.efisdb1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows 7/2008: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /bootmgr /Boot/BCDsdb2: __________________________________________________________________________ File system: ntfs Boot sector type: Windows 7/2008: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /Windows/System32/winload.exesdb3: __________________________________________________________________________ File system: vfat Boot sector type: Windows 7/2008: FAT32 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /Hewlett-Packard/BIOSUpdate/CryptRSA.efi /Hewlett-Packard/BIOSUpdate/CryptRSA32.efi /Hewlett-Packard/BIOSUpdate/HpBiosUpdate.efi /Hewlett-Packard/BIOSUpdate/HpBiosUpdate32.efisdb4: __________________________________________________________________________ File system: ntfs Boot sector type: Windows 7/2008: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: ============================ Drive/Partition Info: =============================Drive: sda _____________________________________________________________________Disk /dev/sda: 2014 MB, 2014314496 bytes48 heads, 47 sectors/track, 1743 cylinders, total 3934208 sectorsUnits = sectors of 1 * 512 = 512 bytesSector size (logical/physical): 512 bytes / 512 bytesPartition Boot Start Sector End Sector # of Sectors Id System/dev/sda1 * 7,736 3,934,207 3,926,472 6 FAT16Drive: sdb _____________________________________________________________________Disk /dev/sdb: 750.2 GB, 750156374016 bytes255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectorsUnits = sectors of 1 * 512 = 512 bytesSector size (logical/physical): 512 bytes / 4096 bytesPartition Boot Start Sector End Sector # of Sectors Id System/dev/sdb1 * 2,048 206,847 204,800 7 NTFS / exFAT / HPFS/dev/sdb2 206,848 1,042,102,271 1,041,895,424 7 NTFS / exFAT / HPFS/dev/sdb3 1,042,102,272 1,058,879,487 16,777,216 c W95 FAT32 (LBA)/dev/sdb4 1,058,879,488 1,465,145,343 406,265,856 7 NTFS / exFAT / HPFSGUID Partition Table detected, but does not seem to be used.Partition Start Sector End Sector # of Sectors System"blkid" output: ________________________________________________________________Device UUID TYPE LABEL/dev/loop0 squashfs /dev/sda1 8445-39EA vfat MULTIBOOT/dev/sdb1 E48A3EB48A3E82DA ntfs System Reserved/dev/sdb2 869E4B729E4B5A37 ntfs /dev/sdb3 70C8-BABE vfat HP_TOOLS/dev/sdb4 FA50FC5C50FC2155 ntfs Bananalandia/dev/sr0 udf UDF Volume/dev/zram0 c7af1e29-699f-4efa-a763-6bd4df3c5edf swap /dev/zram1 ddfe2e88-60eb-4564-9f7f-a6a55d40cfa1 swap /dev/zram2 744b5bbe-811f-43c5-b381-5f9723476774 swap /dev/zram3 501bb243-bf9b-4346-a227-d10edf37dfda swap ========================= "ls -l /dev/disk/by-id" output: ======================total 0lrwxrwxrwx 1 root root 9 Jan 6 20:13 ata-HGST_HTS541075A9E680_JD12001W14AW4B -> ../../sdblrwxrwxrwx 1 root root 10 Jan 6 20:13 ata-HGST_HTS541075A9E680_JD12001W14AW4B-part1 -> ../../sdb1lrwxrwxrwx 1 root root 10 Jan 6 20:13 ata-HGST_HTS541075A9E680_JD12001W14AW4B-part2 -> ../../sdb2lrwxrwxrwx 1 root root 10 Jan 6 20:12 ata-HGST_HTS541075A9E680_JD12001W14AW4B-part3 -> ../../sdb3lrwxrwxrwx 1 root root 10 Jan 6 20:13 ata-HGST_HTS541075A9E680_JD12001W14AW4B-part4 -> ../../sdb4lrwxrwxrwx 1 root root 9 Jan 6 20:12 ata-hp_DVDRAM_GU90N_M83E1M80128 -> ../../sr0lrwxrwxrwx 1 root root 9 Jan 6 20:13 usb-Generic_Flash_Disk_E5F27B91-0:0 -> ../../sdalrwxrwxrwx 1 root root 10 Jan 6 20:12 usb-Generic_Flash_Disk_E5F27B91-0:0-part1 -> ../../sda1lrwxrwxrwx 1 root root 9 Jan 6 20:13 wwn-0x5000cca760d011d0 -> ../../sdblrwxrwxrwx 1 root root 10 Jan 6 20:13 wwn-0x5000cca760d011d0-part1 -> ../../sdb1lrwxrwxrwx 1 root root 10 Jan 6 20:13 wwn-0x5000cca760d011d0-part2 -> ../../sdb2lrwxrwxrwx 1 root root 10 Jan 6 20:12 wwn-0x5000cca760d011d0-part3 -> ../../sdb3lrwxrwxrwx 1 root root 10 Jan 6 20:13 wwn-0x5000cca760d011d0-part4 -> ../../sdb4lrwxrwxrwx 1 root root 9 Jan 6 20:12 wwn-0x5001480000000000 -> ../../sr0================================ Mount points: =================================Device Mount_Point Type Options/dev/loop0 /rofs squashfs (ro,noatime)/dev/sda1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)/dev/sr0 /media/it/UDF Volume udf (ro,nosuid,nodev,uid=999,gid=999,iocharset=utf8,umask=0077,uhelper=udisks2)=============================== StdErr Messages: ===============================File descriptor 9 (/proc/1971/mounts) leaked on lvs invocation. Parent PID 9523: bashFile descriptor 63 (pipe:[28797]) leaked on lvs invocation. Parent PID 9523: bash No volume groups foundADDITIONAL INFORMATION :=================== log of boot-repair 2015-01-06__20h12 ===================boot-repair version : 4ppa14boot-sav version : 4ppa14glade2script version : 3.2.2~ppa47~saucyboot-sav-extra version : 4ppa14File descriptor 9 (/proc/1971/mounts) leaked on lvs invocation. Parent PID 4571: /bin/shNo volume groups foundboot-repair is executed in live-session (Boot-Repair-Disk 64bit 29nov2014, trusty, Ubuntu, x86_64)ls: cannot access /home/usr/.config: No such file or directoryCPU op-mode(s): 32-bit, 64-bitBOOT_IMAGE=/multiboot/boot-repair-disk-64bit/casper/vmlinuz.efi file=/cdrom/multiboot/boot-repair-disk-64bit/preseed/lubuntu.seed boot=casper cdrom-detect/try-usb=true noprompt floppy.allowed_drive_mask=0 ignore_uuid live-media-path=/multiboot/boot-repair-disk-64bit/casper/ initrd=/multiboot/boot-repair-disk-64bit/casper/initrd.lz quiet splash --WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.=================== os-prober:/dev/sdb1:Windows 7 (loader):Windows:chain=================== blkid:/dev/loop0: TYPE="squashfs"/dev/sda1: SEC_TYPE="msdos" LABEL="MULTIBOOT" UUID="8445-39EA" TYPE="vfat"/dev/sdb1: LABEL="System Reserved" UUID="E48A3EB48A3E82DA" TYPE="ntfs"/dev/sdb2: UUID="869E4B729E4B5A37" TYPE="ntfs"/dev/sdb3: LABEL="HP_TOOLS" UUID="70C8-BABE" TYPE="vfat"/dev/sdb4: LABEL="Bananalandia" UUID="FA50FC5C50FC2155" TYPE="ntfs"/dev/sr0: LABEL="UDF Volume" TYPE="udf"/dev/zram0: UUID="c7af1e29-699f-4efa-a763-6bd4df3c5edf" TYPE="swap"/dev/zram1: UUID="ddfe2e88-60eb-4564-9f7f-a6a55d40cfa1" TYPE="swap"/dev/zram2: UUID="744b5bbe-811f-43c5-b381-5f9723476774" TYPE="swap"/dev/zram3: UUID="501bb243-bf9b-4346-a227-d10edf37dfda" TYPE="swap"1 disks with OS, 1 OS : 0 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.Windows not detected by os-prober on sdb2.WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util sfdisk doesn't support GPT. Use GNU Parted.WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.=================== UEFI/Legacy mode:This live-session is not in EFI-mode.EFI in dmesg.[ 0.000000] ACPI: UEFI 000000009cffd000 000236 (v01 HPQOEM 2166 00000001 HP 00040000)SecureBoot maybe enabled.=================== PARTITIONS & DISKS:sdb1 : sdb, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sdb1.sdb2 : sdb, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sdb2.sdb3 : sdb, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sdb3.sdb4 : sdb, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sdb4.sdb : GPT, no-BIOS_boot, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes=================== parted -l:Model: Generic Flash Disk (scsi)Disk /dev/sda: 2014MBSector size (logical/physical): 512B/512BPartition Table: msdosNumber Start End Size Type File system Flags1 3961kB 2014MB 2010MB primary fat16 boot Warning: /dev/sdb contains GPT signatures, indicating that it has a GPT table.However, it does not have a valid fake msdos partition table, as it should.Perhaps it was corrupted -- possibly by a program that doesn't understand GPTpartition tables. Or perhaps you deleted the GPT table, and are now using anmsdos partition table. Is this a GPT partition table?Model: ATA HGST HTS541075A9 (scsi)Disk /dev/sdb: 750GBSector size (logical/physical): 512B/4096BPartition Table: gptNumber Start End Size File system Name Flags Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0has been opened read-only. Error: /dev/sr0: unrecognised disk label Error: /dev/zram0: unrecognised disk label Error: /dev/zram1: unrecognised disk label Error: /dev/zram2: unrecognised disk label Error: /dev/zram3: unrecognised disk label=================== parted -lm:BYT;/dev/sda:2014MB:scsi:512:512:msdos:Generic Flash Disk;1:3961kB:2014MB:2010MB:fat16::boot; Warning: /dev/sdb contains GPT signatures, indicating that it has a GPT table.However, it does not have a valid fake msdos partition table, as it should.Perhaps it was corrupted -- possibly by a program that doesn't understand GPTpartition tables. Or perhaps you deleted the GPT table, and are now using anmsdos partition table. Is this a GPT partition table?BYT;/dev/sdb:750GB:scsi:512:4096:gpt:ATA HGST HTS541075A9; Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0has been opened read-only. Error: /dev/sr0: unrecognised disk label Error: /dev/zram0: unrecognised disk label Error: /dev/zram1: unrecognised disk label Error: /dev/zram2: unrecognised disk label Error: /dev/zram3: unrecognised disk label=================== mount:/cow on / type overlayfs (rw)proc on /proc type proc (rw,noexec,nosuid,nodev)sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)udev on /dev type devtmpfs (rw,mode=0755)devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)/dev/sda1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)/dev/loop0 on /rofs type squashfs (ro,noatime)none on /sys/fs/cgroup type tmpfs (rw)none on /sys/fs/fuse/connections type fusectl (rw)none on /sys/kernel/debug type debugfs (rw)none on /sys/kernel/security type securityfs (rw)tmpfs on /tmp type tmpfs (rw,nosuid,nodev)none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)none on /run/shm type tmpfs (rw,nosuid,nodev)none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)none on /sys/fs/pstore type pstore (rw)systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=it)/dev/sr0 on /media/it/UDF Volume type udf (ro,nosuid,nodev,uid=999,gid=999,iocharset=utf8,umask=0077,uhelper=udisks2)/dev/sdb1 on /mnt/boot-sav/sdb1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)/dev/sdb2 on /mnt/boot-sav/sdb2 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)/dev/sdb3 on /mnt/boot-sav/sdb3 type vfat (rw)/dev/sdb4 on /mnt/boot-sav/sdb4 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)=================== ls:/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 size slaves stat subsystem trace uevent/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 sdb2 sdb3 sdb4 size slaves stat subsystem trace uevent/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent/dev (filtered): autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd freefall full fuse hpet input kmsg log mapper mcelog mei mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sdb sdb1 sdb2 sdb3 sdb4 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom v4l vga_arbiter vhci vhost-net video0 zerols /dev/mapper: control=================== hexdump -n512 -C /dev/sdb100000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|00000020 00 00 00 00 80 00 80 00 ff 1f 03 00 00 00 00 00 |................|00000030 55 21 00 00 00 00 00 00 02 00 00 00 00 00 00 00 |U!..............|00000040 f6 00 00 00 01 00 00 00 da 82 3e 8a b4 3e 8a e4 |..........>..>..|00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|00000200=================== hexdump -n512 -C /dev/sdb200000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 28 03 00 |........?....(..|00000020 00 00 00 00 80 00 80 00 ff 0f 1a 3e 00 00 00 00 |...........>....|00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|00000040 f6 00 00 00 01 00 00 00 37 5a 4b 9e 72 4b 9e 86 |........7ZK.rK..|00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|00000200=================== hexdump -n512 -C /dev/sdb300000000 eb 58 90 4d 53 44 4f 53 35 2e 30 00 02 10 16 20 |.X.MSDOS5.0.... |00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 38 1d 3e |........?....8.>|00000020 00 00 00 01 f5 1f 00 00 00 00 00 00 02 00 00 00 |................|00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|00000040 80 01 29 be ba c8 70 4e 4f 20 4e 41 4d 45 20 20 |..)...pNO NAME |00000050 20 20 46 41 54 33 32 20 20 20 33 c9 8e d1 bc f4 | FAT32 3.....|00000060 7b 8e c1 8e d9 bd 00 7c 88 4e 02 8a 56 40 b4 41 |{......|[email protected]|00000070 bb aa 55 cd 13 72 10 81 fb 55 aa 75 0a f6 c1 01 |..U..r...U.u....|00000080 74 05 fe 46 02 eb 2d 8a 56 40 b4 08 cd 13 73 05 |[email protected].|00000090 b9 ff ff 8a f1 66 0f b6 c6 40 66 0f b6 d1 80 e2 |.....f...@f.....|000000a0 3f f7 e2 86 cd c0 ed 06 41 66 0f b7 c9 66 f7 e1 |?.......Af...f..|000000b0 66 89 46 f8 83 7e 16 00 75 38 83 7e 2a 00 77 32 |f.F..~..u8.~*.w2|000000c0 66 8b 46 1c 66 83 c0 0c bb 00 80 b9 01 00 e8 2b |f.F.f..........+|000000d0 00 e9 2c 03 a0 fa 7d b4 7d 8b f0 ac 84 c0 74 17 |..,...}.}.....t.|000000e0 3c ff 74 09 b4 0e bb 07 00 cd 10 eb ee a0 fb 7d |<.t............}|000000f0 eb e5 a0 f9 7d eb e0 98 cd 16 cd 19 66 60 80 7e |....}.......f`.~|00000100 02 00 0f 84 20 00 66 6a 00 66 50 06 53 66 68 10 |.... .fj.fP.Sfh.|00000110 00 01 00 b4 42 8a 56 40 8b f4 cd 13 66 58 66 58 |[email protected]|00000120 66 58 66 58 eb 33 66 3b 46 f8 72 03 f9 eb 2a 66 |fXfX.3f;F.r...*f|00000130 33 d2 66 0f b7 4e 18 66 f7 f1 fe c2 8a ca 66 8b |3.f..N.f......f.|00000140 d0 66 c1 ea 10 f7 76 1a 86 d6 8a 56 40 8a e8 c0 |.f....v....V@...|00000150 e4 06 0a cc b8 01 02 cd 13 66 61 0f 82 75 ff 81 |.........fa..u..|00000160 c3 00 02 66 40 49 75 94 c3 42 4f 4f 54 4d 47 52 |[email protected]|00000170 20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00 | ............|00000180 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|*000001a0 00 00 00 00 00 00 00 00 00 00 00 00 0d 0a 52 65 |..............Re|000001b0 6d 6f 76 65 20 64 69 73 6b 73 20 6f 72 20 6f 74 |move disks or ot|000001c0 68 65 72 20 6d 65 64 69 61 2e ff 0d 0a 44 69 73 |her media....Dis|000001d0 6b 20 65 72 72 6f 72 ff 0d 0a 50 72 65 73 73 20 |k error...Press |000001e0 61 6e 79 20 6b 65 79 20 74 6f 20 72 65 73 74 61 |any key to resta|000001f0 72 74 0d 0a 00 00 00 00 00 ac cb d8 00 00 55 aa |rt............U.|00000200=================== hexdump -n512 -C /dev/sdb400000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 38 1d 3f |........?....8.?|00000020 00 00 00 00 80 00 80 00 ff 1f 37 18 00 00 00 00 |..........7.....|00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|00000040 f6 00 00 00 01 00 00 00 55 21 fc 50 5c fc 50 fa |........U!.P.P.|00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|00000200WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.=================== df -Th:Filesystem Type Size Used Avail Use% Mounted on/cow overlayfs 3.9G 6.2M 3.9G 1% /udev devtmpfs 3.9G 12K 3.9G 1% /devtmpfs tmpfs 792M 1.2M 791M 1% /run/dev/sda1 vfat 1.9G 628M 1.3G 33% /cdrom/dev/loop0 squashfs 549M 549M 0 100% /rofsnone tmpfs 4.0K 0 4.0K 0% /sys/fs/cgrouptmpfs tmpfs 3.9G 8.0K 3.9G 1% /tmpnone tmpfs 5.0M 0 5.0M 0% /run/locknone tmpfs 3.9G 0 3.9G 0% /run/shmnone tm
Maybe you are looking for
-
Problem with K9N Ultra and Windows 7!!
Hello, I have the following system: - K9N Ultra (MS7250 - Version:2.0) - AMD Athlon 64 3500+ - 4x Kingston KVR533D2N4/512 - NVIDIA GForce 7300GS - Seagate Baracuda: ST3120827AS (7200rpm) - NEC DVDRW ND4571A I am running Windows XP SP3 but when I try
-
Creating a DLL in LabVIEW containing a function using pointer to pointer
Hi! I´m facing the problem to create a DLL from LabVIEW containing the following C-function: functionF(structS** arrayA) , where: structS is a struct of various data-types (e.g. int) arrayA is an C-array of structS How can this be done? Any ideas? Th
-
Disable hyperthreading on a GE70 20E
Hi all, before starting another flame war on hyperthreading (HT): yes, I know what it is. Yes, I'm certain I want to turn it off. Reasons below. On my previous laptops (both HP) turning it off was about as easy as going to the BIOS and disable the hy
-
Hello, I have a problem when I activated my iPhone, it says "Your iPhone could not be activated because the activation server is temporarily unavailable" and I tried wifi and iTunes
-
HT1695 Cant Connect To Wifi With Case Iphone 5
I just got a case in the mail today for my iphone 5 and noticed right away that it wont access my wifi with it on. As soon as I remove it I can instantly connect to wifi. Very disappointed. The case is just a thin slip over. Nothing big and bulky. An