Problem with KB 2630976 (related to Office 365 signup) in WSUS

I see that 2630976 is shown as needed by all computers yet when approved no computers install it though WSUS still shows the update as needed. The only posting I've seen about this is from SBS Diva with a recommendation to decline it. Has Microsoft provided
any guidance on this? For more info see:
http://support.microsoft.com/kb/2630976Kevin Severud CCNA Security & Wireless, MCITP:EA & EDA7 MCTS Exchange 2007, MCTS SQL 2005

I know this is ancient, but it has come up in my environment since it shows up as necessary when running Office 365 Settings
Office 365 is not patched by WSUS or Microsoft Update, so is functionally out of scope for this forum.
If an update is showing as needed on Microsoft Update, then the client has something other than Office 365 installed.
If anyone who replied to Kevin had taken the time to actually go to the link, they would've noticed that it is not an update at all.
Also worthy of note, I don't have this update on my WSUS servers and it's not listed in KB894199 or its ancestors, so I'm curious how this update got on your WSUS server, and what product category it is assigned to. (Not to say that KB894199 might be
flawed, but for an update to be absent both locations is somewhat unusual.)
I did question the legitimacy of the claimed update in my Jan 14th reply. You'll note the O.P. abandoned the thread and never responded.
In WSUS, it is classified as Update Rollups for products Microsoft Online Services Sign-in Assistant
But if it exists in WSUS in Update Rollups and has an Update Title, then it *IS* an installable update. WSUS does not synchronize "informational documents".
but I'm racking my lower end tech savvy brain trying to figure out why Outlook crashes so much for members of my organization even prior to a full load of users.
That's something you'll need to take up in an Office 365 forum (if you are using O365), or a Microsoft Office forum (if you're using Office 2013).
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Similar Messages

Severe problem with 'Drill to Related' using drill icon

Hi
I have a severe problem with 'Drill to Related' in Discoverer Plus (10.1.2.54.25) using the drill icon of a worksheet:
1. Though existing no items to drill to are shown in the context menu (or pop-up list), instead it says just 'Drill to Related...'
2. Clicking on menue item 'Drill to Related...' results in 50% processor load (permanent) and no further update of the browser window (IE 7.0.5730.11) containig Discoverer Plus. There is no recovery of that state within about 20 minutes.
This behaviour is both highly reproducible and annoying.
When using the drill dialog instead of the icon the expected items are shown and 'Drill to Related' works fine. Although that is a workaround I don't think it acceptable to tell the end-users to use it.
I searched metalink for a hint but couldn't find anything.
Can anyone help?
Franziska

Hi S
This seems to be a bug that was fixed earlier since we didn't experience it having applied cumulative patch 3 earlier.
Something might be said about your problem in Metalink
Doc ID: Note:422575.1
Subject: Drilling With Discoverer Viewer 10g (10.1.2) Using Internet Explorer 7 (IE7) Fails With Javascript Error
We still had to apply the patch for the bug I mentioned earlier in this thread in order to be able to see and select an item to drill to. Unfortunately the problem with the processor load up to 50% and nothing happening is still there.
By the way IE 7 is certified now according to the Oracle certification information.
Hope this helps
Franziska

Problem linking SharePoint 2007 calendar to Office 365 Outlook

Hello,
I'm trying to link our SharePoint 2007 calendar to my Office 365 Outlook on my Surface Pro 3 running Windows 8.1. The problem is, the Actions button in our Sharepoint calendar does not have the "Connect to Outlook" option visible at all. I've done
the connection multiple times and everything should be in order, but now trying to do this with our new Office 365 & Surface Pros this problem occurs. I tried it with two different Surface Pros, neither have the Connect to Outlook button available.
Any ideas?

Having been working on a very similar project for a good few months, I could probably write a novel on this.
First, forget about the tool, there's isn't a golden utility that'll do everything for you. This is due to the two generation gap between technologies and the move from on-premise to cloud. Simply throwing a tool at this and hoping it'll work
will cause you problems.
First, analyse your SP 2007 environment and work out what you think your pressure points will be. For us, there were plenty, such as: -
Custom workflows
Densly populated lists
Changes in functionality, content types and so on
Obsecure changes to web part functionality
You'll want to see HOW any tool you look at handles these issues. We ended up using Metalogix Content Matrix, which has a few troubles moving workflows and custom forms. In the end these were recreated manually.
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

Problem with include and relative path in jsp

Precompile jsp with wlappc in 9.2, I got the error "The include file was not found" when the jsp use <%@ include file="../includes/dataEntry/code_error.html" %>
          This code used to work with 8.1. I notice that someone has report the same problem with 9.0 and you have patch for it. Is it fix in 9.2 or do I require a patch as well?
          Thanks,
          Khuemy

When you precompile, can you say "Keepgenerated=TRUE". It might help you track
          down the difference with the URL. You should only get a 404 error when the
          resource is not found at runtime, which is independant of when you compile. The
          difference should be in how the URL is compiled.
          Chris
          ali wrote:
          > I am using WLS 6.0 SP1, when I use relative path in <jsp:forward> in my JSPs
          > it forwards ok if I am using directly JSPs but if I am using pre-compiled
          > JSPs (and have proper servlet-mappings
          > in my web.xml), I get 404 error with the relative-path, if I change it to
          > absolute path with pre-compiled JSPs it forwards ok , then.
          > any ideas why this is so?
          > thanks,

Problem with jsessionid and relative paths

I'm having an issue with jsessionid in a J2EE application running on an all Oracle platform (Oracle DB, 9ias, etc.). Most of the time sessions are tracked with cookies, but occasionally the jsessionid appears on the URL (on first login with a new browser window I think?).
Anyway, sometimes the session id is very large (100 chars +) and includes special characters, specifically a backslash. This is causing problems with relative paths in the page.
Is this normal behavior or is there a problem with my app server/JVM setup? Has anyone else seen this? Thanks for any advice.

Hi Stefan,
          The issue was logged as CR238704. You can either contact [email protected] or
          just pass me your email Id and I'll send the patch to you.
          -- Nagesh
          <Stefan Krause> wrote in message news:[email protected]..
          > The problem I have is that the application is very old and at the same
          > time very big (so we're doing the transition step by step) and there are
          > lots of variables (and even methods in JSP pages - no comment) shared
          > between the JSP pages!
          > So for us jsp:include isn't an option...
          >
          > Is there a way to report bugs when you've got only the free development
          > license?

Serious Problems with anything IPOD related

I've recently had trouble with my IPOD. I connect it to the computer and see the charging splash screen for a few seconds and then it stops. My computer doesent detect it at all (like it used to) and my IPOD wont even turn on. I read some troubleshooting on here and went ahead and uninstalled everything. I uninstalled quicktime, IPOD, IPOD updater, and ITUNES. I then downloaded both ITUNES and IPOD updated and in each instance I get this very very weird command line parameter:
Command line parameters:
/L language ID
/S Hide intialization dialog. For silent mode use: /S /v/qn.
/V parameters to MsiExec.exe
/UA<url to InstMsiA.exe>
/UW<url to InstMsiW.exe>
/UM<url to msi package>
After I receive that message I click "Ok" and absolutely nothing happens. It never did this before, I never had problems with my ipod or itunes before, nothing. I have no idea what the catalyst for all of this is. Any help is greatly appreciated.

BUMP!!
Now when I plug my IPOD in it actually has a splash screen. It shows a folder icon with an exclamation point. I imagine it shows that because I uninstalled ALL IPOD related software. The problem is, I STILL cant install any IPOD material, I get the same error code I posted earlier over and over again.

Queries related to Office 365 Small Business Premium Installation

I was exploring your Office website and thought to buy Office 365 Small Business Premium but was not able to understand one statement which was "Subscription to Office for up to 5 PCs/Macs and 5 Windows tablets/iPads per user"
Does the above statement mean that If I purchase 1user license of Office 365 Small Business Premium ( Cost rs 750) then I will be getting the right to install it onto 5 computers. Below is the link for your reference.
http://office.microsoft.com/en-in/business/compare-all-office-365-for-business-plans-FX104051403.aspx
Please reply asap.

Hi,
Yes, you can install Office applications on up to 5PCs or Macs.
As an administrator, you can deploy and manage Office 365 across your company. After adding users, per user can install Office applications up to 5 PCs/Macs or Windows tablet/iPads.
Regards,
Greta Ge CHN
TechNet Community Support

Problem while opening excel files in office 365

Hi, Facing issue in office 365. Suppose one excel file is already opened and if we tried to open another one it just is looks like opening file and if check after sometime it shows excel blank window to open new file.
Please help

Hi,
Thanks for your post.
Based on my experience, if you've ticked the option of "Ignore other applications that use Dynamic Data Exchange (DDE)“
under FILE>Options>Advanced, you will probably have this kind of issue.
Please try to turn off that option and see if it works.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Problem with sendRedirect using relative URL in WebLogic 5.1 with SP7 & 8

I patched to SP 7 (and also 8), and the request.sendRedirect() with relative
          URL failed. The browser simply displayed "404 - Page not found".
          This problem only happens in a cluster environment attached to a web server.
          SP6 or earlier does not have such problem.
          I noticed that the latest SP always formats the URL and returns it as a full
          absolute URL to the browser. The problem is it uses the Weblogic Server host
          URL where the request is processed (not the Web Server host URL) which is
          not visible to the internet.
          Is it possibly a bug in SP?


I patched to SP 7 (and also 8), and the request.sendRedirect() with relative
          URL failed. The browser simply displayed "404 - Page not found".
          This problem only happens in a cluster environment attached to a web server.
          SP6 or earlier does not have such problem.
          I noticed that the latest SP always formats the URL and returns it as a full
          absolute URL to the browser. The problem is it uses the Weblogic Server host
          URL where the request is processed (not the Web Server host URL) which is
          not visible to the internet.
          Is it possibly a bug in SP?

Problem with cross-database relation in EJB3 entities with Sybase DB

Hi,
while experimenting with EJB3 as a beginner, I noticed that generated queries sent to the Sybase DB never use the catalog name prepending the table name (like in: select * from user_db..Account where Id = 'myname'). Instead only table name is used, which schema-name prepended in case it's not blank.
This is inconvinient, since it forces me to use several persistence units, one for each catalog.
What is even more a problem, is that an entitiy that has a relation to another entity mapped to a table in a different catalog, doesn't work, at runtime I get a error '...sql error...table <table_in_other_catalog> not found...'
Is there a fix/work around for this problem?
Any suggestion would be greatly appreciated.
Mark

Was it that there was an entity generation bug, or was it that your classes were out of sync, and that by changing the table names that you regenerated the entity classes to be in sync?
If you have a simple reproducable test case of the problem then it would be great if you could enter a bug in Bugzilla:
https://bugs.eclipse.org/bugs/enter_bug.cgi?product=EPS%28EclipseLink%29
Thanks.

Problem with Cross Tab in Live Office Connectivity

Hi Experts,
I am using Live Office Connectivity to build a Xcelsius Dashboard.
The webi Report has data in 4 cross tabs which comes to Xcelsius as 4 LO Connections.
The size of the Xcelsius Doc is around 900K. I am getting "Xcelcius has stopped working " error when i preview the document.
Earlier i have built dashboards on Webi Report which used Verticle tables(more than 1 MB in size). I am able to preview them and generate SWF without any problem.
I am working on Xcelsius SP3 on Vista OS with 2 GB RAM.
Is using Cross Tab, responsible for the Application Crash or any other reason?
Please help me in solving the above problem at the earliest.
Please let me know if you need any further information on the same.
TIA,
Bhargava Bommidi.

Bhargava,
Webi cross tabs via Live Office connection should work. Pls see this [post|Re: Does Xcelsius support Cross Tab report via Live Office?; for more detail.
Pls let me know what version of Xcelsius you are using because this error is known to popup when some of the dlls are not registered as well.
Cheers,
Ryan

Problems with VAMT 3 to Activate Office and windows

Hope someone can help with this problem. =)
The School that i work for has a Volume Licence Agreement for Windows and Office, and now we are starting to deploy office 2013 plus.
Our problems started when we upgraded to VAMT 3. The proccess went like this:
Downloaded and installed all components from the Windows
ADK, then imported the vamt 2 catalog (all the computers activated with vamt 2 are shown correctly) then added the Windows 8 and Office 2013 MAK keys to VAMT 3.
Next step was to search for devices, (by hostname),
VAMT 3 found the computer, then proceeded to to update the licence status for the computer, then a window came up stating : 0/1 completed 0/0 succesfull 0/0 Failed . No further error is shown.
in order to troubleshoot i completely disabled Firewall and UAC, also added the suggested Dword LocalAccountTokenFilterPolicy Value=1 to the registry on the client computer.
The Computer that has windows ADK has Windows 7 pro 64 bits and its up to date.
Any help is welcome. Thanks in advanced.

Hi,
You encounter a known issue described in the following article:
When opening a Computer Information List (.cil file) saved in a previous version of VAMT, the edition information is not shown for each product in the center pane. Users must update the product status again to obtain the edition information
VAMT Known Issues
http://technet.microsoft.com/en-in/library/hh824848.aspx

Refresh Problem with manyToOne OneToMany relations in EJB3/0

Hi all,
I have three tables defined.
Table A, B and C. B is an association table between A and C.
I have made a simple web application in which I can insert entries in the association table B.
The problem is now that when I insert a new entry in B the changes are not reflected to the defined @OneToMany relations in A and C, untill I restart the OC4J DP4 10.1.3.0 server.
I think the problem lies in the fact that the EJB relations are not refreshed properly.
Does anyone regconize this problem?
Thanks in advance

Sorry, no solution.
Would just like to add my weight to this post as Im having the same trouble unless of course you managed to resolve it in which case Id be grateful for your wsidom.
Two entites (created with CMP from tables wizard) Location contains Stock. Cascade of PERSIST defined.
Facade method to add stock to a location works (Correct values are insserted into the database) but subsequent finds return Stock entities that are unpopulated (i.e. all proeprties are null).
Im using latest JDeveloper 10.1.3 build 3673 downloaded a couple of days ago. Am running within JDeveloper also.
Facade method :-
public void writeOnStock(String loc, String prod, int qty, String container)
throws InvalidProductCode, InvalidLocationCode {
Location l = (Location) em.find("Location",loc);
if (l==null) throw new InvalidLocationCode(loc);
Product p = (Product) em.find("Product",prod);
if (p==null) throw new InvalidProductCode(prod);
Stock s = new Stock();
s.setProduct(p);
s.setQty(new Long(qty));
s.setContainer(container);
s.setStatus("-");
l.addStock(s);
My tester code...
stockFacade.writeOnStock("BAY1","LP1",1,"PAL1");
System.out.println( stockFacade.findAllStock( ) );
Output of...
[Stock:[null]null on null]
but stock table contains a row with all the correct data (Id of 45)
Stop and start the embedded OC4J server and run again I get...
[Stock:[45]1 on PAL1, Stock:[null]null on null]
As you can see record 45 from previous run is fine now, but latest is all null.
Any help appreciated. Gonna raise a TAR and upload my code. Ill post back if I get a solution.

[SOLVED]Problem with Ubuntu One related python module gi.repository

So, I have Ubuntu One working on another Arch install, but I just put it on my new laptop today, and it's not working. Installed with no apparent problems. However, when I try to run
$ ubuntuone-control-panel-qt
I get these messages (the last line is the only one that contains an actual error message):
Traceback (most recent call last):
File "/usr/bin/ubuntuone-control-panel-qt", line 29, in <module>
from ubuntuone.controlpanel.gui.qt import main
File "/usr/lib/python2.7/site-packages/ubuntuone-control-panel/ubuntuone/controlpanel/gui/__init__.py", line 26, in <module>
from ubuntuone.controlpanel.backend import UBUNTUONE_LINK
File "/usr/lib/python2.7/site-packages/ubuntuone-control-panel/ubuntuone/controlpanel/backend.py", line 29, in <module>
from ubuntuone.platform.credentials import CredentialsManagementTool
File "/usr/lib/python2.7/site-packages/ubuntuone-client/ubuntuone/platform/__init__.py", line 47, in <module>
from ubuntuone.platform import os_helper
File "/usr/lib/python2.7/site-packages/ubuntuone-client/ubuntuone/platform/os_helper/__init__.py", line 41, in <module>
from ubuntuone.platform.os_helper import linux
File "/usr/lib/python2.7/site-packages/ubuntuone-client/ubuntuone/platform/os_helper/linux.py", line 48, in <module>
from gi.repository import Gio, GLib
ImportError: No module named gi.repository
I read on some Ubuntu site that it might help to reinstall python-gobjects, though the package is different on Arch (which I guess is a given), and it pulled in python3, so, as you might imagine, it didn't work.
When I run `ubuntuone-launch` or `u1sdtool` I don't get an error, but nothing happens either (no prompt for login). I searched google and the forums and the wiki, so sorry if I missed something obvious. Don't know anything about python either, beyond "hello-world.py" (and that I had to put parenthesis around the print statement in order to "port my software" to python3)
Last edited by ninjaaron (2012-10-24 05:12:04)

I only had python2-gobject2 (well, and python-gobject, and python-gobject2). Installed python2-gobject and it works now.
Thanks!
SOLVED
Last edited by ninjaaron (2012-10-24 05:27:21)

Problem with comparing (excel related)

Problem: Basically all the vi does is grab values from excel and compare it with a pre-determined value and if the returned value is greater than or equal the vi stops and returns the cell which gave it thar value. I think it may that I am telling excel to compare a string value to a decimal value but I have tried that and it seems to stop instantly with a value which is cleary wrong.
I have attached the vi and sample excel file which it searchs through
Solved!
Go to Solution.
Attachments:
ReturnLeftPeak test.vi ‏35 KB
Importmacro1.xls ‏158 KB

Don't see a problem. Start at A4 and it stops on the first iteration as it should (because the cell is blank it converts to a 0 which is greater than -30). Starting at A5 it steps down to A368, again just as it should.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Problem with KB 2630976 (related to Office 365 signup) in WSUS

Similar Messages

Maybe you are looking for