Problem with kerio-control-vpnclient
Hi everyone
i connect to internet with kerio-control-vpnclient
the problem is some site filter by goverment like facebook and when connect with my VPN,
all site load but the facebook and youtube and so on not load
i guess the problem is my DNS
how i enter custom DNS to kerio-control-vpnclient?
Tnks all
there is a field in TableViewName-xxx
don't remember the exact field name for (total no of records)
you can check it in debug. when you add records in Internal table, u need to modify this field which is set at the first time when table control is populated.
Similar Messages
-
Problem with Table control lines
Hi Friends,
This is the problem with table control lines:
I have screen with table control and I would like change the table control lines dynamicaly.
Exp:
In my PBO the Internal table which I am using to loop the TC is havig 7 records and its displayed with 7 records, now I have added one more record into my ITAB and now ITAB is having 8 records, when I am looping this ITAB with TC its taking the TC lines 7 only.
here is the code:
Initial values in gt_scr400 = 8
Initial values in tc_scr400 = 8
Now added one more recor into gt_scr400 , now gt_scr400 = 9.
LOOP AT gt_scr400
INTO wa_scr400
WITH CONTROL tc_scr400
CURSOR tc_scr400-current_line.
ENDLOOP.
I have used this logic :
DESCRIBE TABLE gt_scr400 LINES g_rec_300 .
tc_scr300-lines = g_rec_300.
but its not modifying the lines in my table control.
How to change the TC lines based on ITAB total records.
Thanks,
Sridharthere is a field in TableViewName-xxx
don't remember the exact field name for (total no of records)
you can check it in debug. when you add records in Internal table, u need to modify this field which is set at the first time when table control is populated. -
Who else has a problem with parental controls enabled not being able to run Firefox on the Mac? (Any solutions?) (BTW. Chrome doesn't work either)
Although FF4 is so nice I'm almost ready to ditch iGoogle!
Please fix what appears to be an RSS/iGoogle issue with FF4...
Gmail is fine, but titles dont show in most RSS feed gadgets and no stories, strangely, apart from this one:
http://www.google.com.au/ig/directory?hl=en&url=www.google.com/ig/modules/builtin_news_technology.xml
Which if you enter the last part of the url reports that
"<Content type="html">
This is a builtin module, so the UserPrefs and Content are ignored."
Any ideas? -
Keyboard problem with T410 - Control Key
I have a problem with the control keys on the keyboard of T410.
I swapped my X200 keyboard over to T410 to check if it is software or hardware issues. With the X200 keyboard, the 'Ctrl' key is not working. With the T410 keyboard, 'e', 'd', 'c' and 'Ctrl' keys are not working.Welcome to the forum!
I believe that X200 and T410 keyboards are mapped differently in BIOS.
Can you find another T410/T510 keyboard to test with?
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you. -
URGENT ! JDEV 10.1.2 Problem with data control generated from session bean
I got a problem with data control generated from session bean which return a collection of data transfer object.
The dto's seem to be correct. The session bean load correctly the data into and the object's are plenty of data. Using the console to display the dto content is ok.
When generating a data control from this session bean and associate the dto included in the collection only the first object level and one-to-one dto object are correctly setted in the data control. Object that represent collection into the dto (one-to-many foreign key) are setted as collection with an iterator but the structure of the object is not setted. I don't know how to associate this second level of collection with the dto bean class to obtain the attributes definition.
I created a case with hr schema like the hrApp demo application in the tutorial with departments and employees table. I got the same problem.
Is it a bug ?
It exists a workaround to force the data control to understand the collection data structure ?
Help is welcome ! this is urgent !!!we found the problem by assigning the child dto bean class to the node representing the iterator in the xml file corresponding to the master dto.
-
Problem with custom control and focus
I've a problem with the focus in a custom control that contains a TextField and some custom nodes.
If i create a form with some of these custom controls i'm not able to navigate through these fields by using the TAB key.
I've implemented a KeyEvent listener on the custom control and was able to grab the focus and forward it to the embedded TextField by calling requestFocus() on the TextField but the problem is that the TextField won't get rid of the focus anymore. Means if i press TAB the first embedded TextField will get the focus, after pressing TAB again the embedded TextField in the next custom control will get the focus AND the former focused TextField still got the focus!?
So i'm not able to remove the focus from an embeded TextField.
Any idea how to do this ?Here you go, it contains the control, skin and behavior of the custom control, the css file and a test file that shows the problem...
control:
import javafx.scene.control.Control;
import javafx.scene.control.TextField;
public class TestInput extends Control {
private static final String DEFAULT_STYLE_CLASS = "test-input";
private TextField textField;
private int id;
public TestInput(final int ID) {
super();
id = ID;
textField = new TextField();
init();
private void init() {
getStyleClass().add(DEFAULT_STYLE_CLASS);
public TextField getTextField() {
return textField;
@Override protected String getUserAgentStylesheet() {
return getClass().getResource("testinput.css").toExternalForm();
@Override public String toString() {
return "TestInput" + id + ": " + super.toString();
}skin:
import com.sun.javafx.scene.control.skin.SkinBase;
import javafx.beans.value.ChangeListener;
import javafx.beans.value.ObservableValue;
import javafx.event.EventHandler;
import javafx.scene.control.TextField;
import javafx.scene.input.KeyCode;
import javafx.scene.input.KeyEvent;
public class TestInputSkin extends SkinBase<TestInput, TestInputBehavior> {
private TestInput control;
private TextField textField;
private boolean initialized;
public TestInputSkin(final TestInput CONTROL) {
super(CONTROL, new TestInputBehavior(CONTROL));
control = CONTROL;
textField = control.getTextField();
initialized = false;
init();
private void init() {
initialized = true;
paint();
public final void paint() {
if (!initialized) {
init();
getChildren().clear();
getChildren().addAll(textField);
@Override public final TestInput getSkinnable() {
return control;
@Override public final void dispose() {
control = null;
}behavior:
import com.sun.javafx.scene.control.behavior.BehaviorBase;
import javafx.beans.value.ChangeListener;
import javafx.beans.value.ObservableValue;
import javafx.event.EventHandler;
import javafx.scene.input.KeyCode;
import javafx.scene.input.KeyEvent;
public class TestInputBehavior extends BehaviorBase<TestInput> {
private TestInput control;
public TestInputBehavior(final TestInput CONTROL) {
super(CONTROL);
control = CONTROL;
control.getTextField().addEventFilter(KeyEvent.KEY_PRESSED, new EventHandler<KeyEvent>() {
@Override public void handle(final KeyEvent EVENT) {
if (KeyEvent.KEY_PRESSED.equals(EVENT.getEventType())) {
keyPressed(EVENT);
control.focusedProperty().addListener(new ChangeListener<Boolean>() {
@Override public void changed(ObservableValue<? extends Boolean> ov, Boolean wasFocused, Boolean isFocused) {
if (isFocused) { isFocused(); } else { lostFocus(); }
public void isFocused() {
System.out.println(control.toString() + " got focus");
control.getTextField().requestFocus();
public void lostFocus() {
System.out.println(control.toString() + " lost focus");
public void keyPressed(KeyEvent EVENT) {
if (KeyCode.TAB.equals(EVENT.getCode())) {
control.getScene().getFocusOwner().requestFocus();
}the css file:
.test-input {
-fx-skin: "TestInputSkin";
}and finally the test app:
import javafx.application.Application;
import javafx.scene.Scene;
import javafx.scene.control.TextField;
import javafx.scene.layout.GridPane;
import javafx.stage.Stage;
public class Test extends Application {
TestInput input1;
TestInput input2;
TestInput input3;
TextField input4;
TextField input5;
TextField input6;
Scene scene;
@Override public void start(final Stage STAGE) {
setupStage(STAGE, setupScene());
private Scene setupScene() {
input1 = new TestInput(1);
input2 = new TestInput(2);
input3 = new TestInput(3);
input4 = new TextField();
input5 = new TextField();
input6 = new TextField();
GridPane pane = new GridPane();
pane.add(input1, 1, 1);
pane.add(input2, 1, 2);
pane.add(input3, 1, 3);
pane.add(input4, 2, 1);
pane.add(input5, 2, 2);
pane.add(input6, 2, 3);
scene = new Scene(pane);
return scene;
private void setupStage(final Stage STAGE, final Scene SCENE) {
STAGE.setTitle("Test");
STAGE.setScene(SCENE);
STAGE.show();
public static void main(String[] args) {
launch(args);
The test app shows three custom controls on the left column and three standard textfields on the right column. If you press TAB you will see what i mean... -
Problems with remote control and user accounts - error 1759?
We're running:
-XP Pro SP2 clients with Zen SP1 IR3a agent, 4.91 SP2 Netware client.
-We are NOT running Middle Tier.
-Novell servers are running Netware 6.5 SP7, E-directory 8.7.3.10b or 8.8.
-Zen server is also SP1 IR3a.
We have no problem using remote control on workstation objects. We are having intermittent issues with remote controlling user objects. When the issue occurs, we receive the following error, "Error 1759: The selected user is not logged in on any workstations" even though the user is in fact logged in. After some more research, it appears that the "networkAddress" attribute of the user object is blank so we feel that this is the root cause. My question is what would cause the networkAddress attribute to randomly not update? For instance we had a user (verified his login) who we could not remote via the user object (workstation object worked). We checked his networkAddress attribute and found that it was empty. User rebooted and logged in again and his networkAddress attribute populated, and then we could remote control him via the user object. Now this isn't always the case after a reboot. There doesn't appear to be any pattern to when the networkAddress attribute does or does not update. In fact, this particular user has a laptop so he boots it up fresh every morning yet he was not showing a network address when he logged in initially today.
We've followed the troubleshooting steps in Novell Documentation without any success. Is there anything else that we might be missing, especially with respect to getting the networkAddress attribute to update? We ran a DSreport on that attribute and found about 500 out of a total of 1500 users had no networkAddress. Some of those are sure to be legitimate but that number is much too high for the number of people that should be in the office.
I've read some older threads on the subject but none of them really provide a firm solution. Also most of the older threads reference Middle Tier which we are not using.
Thanks in advance.> 4.91 SP2 Netware client.
You could try this TID:
"A user will no longer have an entry in their "Network Address" attribute
even though they are logged into the eDirectory Tree."
http://www.novell.com/support/viewCo...1262&sliceId=1
"Resolution"
"This was fixed in the 4.91 SP3 client. NWFS.SYS was modified so that it
will check the monitor connection on a reconnect and if it is not connected
close the connection and try and get a new monitor connection to the tree.
Prior to the 4.91 SP3 client, the solution is to have the user login again
so that it issues the NDS Finish Login request again that will populate
Network Address again."
Regards
Rolf Lidvall
Swedish Radio (Ltd) -
Problem with remote control and Windows 7 - HP Pavilion 6301eu
I installed Windows 7 32-bit and my remote control does not work. I have tried all possible drivers and still nothing ... Photo driver attached. Does anyone have a link to the current drivers for the remote control and Windows 7? thank you
Hi John:
Thanks but, I had already done this. I was having THAT problem with Encore (could not even initialize before tanking) when I first installed it and that's when I updated the Roxio engine. I don't know what else there is to update or correct at this point.
There was one thing that occurred to me: When I was using XP, I had to disable Open GL in order to get Encore to stabilize. I've heard one recommendation for Encore that one must disable graphics acceleration. I would like try that here except I can't figure out how to do that in Windows 7.
I've been Googling "Windows 7 Disable Graphics Accel" and have come up with nothing useful.
Thanks for your help though and if you have any other ideas, I'm all ears.
Mark -
Hi @all
OS Windows Server 2008 (Standard)
DB 11.1.0.7.0
I try to configure DB Control manually with
D:\ORACLE\product\11.1.0\db_1\BIN>emca -config dbcontrol db -repos create
result is
15.09.2009 13:19:14 oracle.sysman.emcp.EMConfig perform
INFO: Dieser Vorgang wird in D:\ORACLE\cfgtoollogs\emca\SAXMBS\emca_2009_09_15_1
3_15_52.log protokolliert.
15.09.2009 13:19:15 oracle.sysman.emcp.util.FileUtil backupFile
WARNUNG: Datei D:\ORACLE\product\11.1.0\db_1\sysman\config\emd.properties konnte
nicht gesichert werden
15.09.2009 13:19:15 oracle.sysman.emcp.util.FileUtil backupFile
WARNUNG: Datei D:\ORACLE\product\11.1.0\db_1\sysman\config\emoms.properties.emca
konnte nicht gesichert werden
15.09.2009 13:19:15 oracle.sysman.emcp.util.FileUtil backupFile
WARNUNG: Datei D:\ORACLE\product\11.1.0\db_1\sysman\emd\targets.xml konnte nicht
gesichert werden
15.09.2009 13:19:15 oracle.sysman.emcp.util.DBControlUtil stopOMS
INFO: Database Control wird gestoppt (dies kann etwas lõnger dauern) ...
15.09.2009 13:19:15 oracle.sysman.emcp.EMReposConfig createRepository
INFO: Das EM-Repository wird erstellt (dies kann etwas lõnger dauern)...
15.09.2009 13:24:22 oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository erfolgreich erstellt
15.09.2009 13:24:23 oracle.sysman.emcp.EMReposConfig uploadConfigDataToRepositor
y
INFO: Konfigurationsdaten werden in das EM-Repository hochgeladen (dies kann etw
as lõnger dauern) ...
15.09.2009 13:25:02 oracle.sysman.emcp.EMReposConfig invoke
INFO: Konfigurationsdaten wurden erfolgreich hochgeladen
15.09.2009 13:25:02 oracle.sysman.emcp.EMConfig perform
SCHWERWIEGEND: Fehler beim Aktualisieren von D:\ORACLE\product\11.1.0\db_1\sysma
n\config\emoms.properties
Weitere Einzelheiten finden Sie in der Log-Datei in D:\ORACLE\cfgtoollogs\emca\S
AXMBS\emca_2009_09_15_13_15_52.log.
Die Konfiguration konnte nicht abgeschlossen werden. Weitere Einzelheiten finden
Sie in der Log-Datei in D:\ORACLE\cfgtoollogs\emca\SAXMBS\emca_2009_09_15_13_15
_52.log.
snippet of the log
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:468)
Caused by: java.io.FileNotFoundException: D:\ORACLE\product\11.1.0\db_1\sysman\config\emoms.properties (Zugriff verweigert)
at java.io.FileOutputStream.open(Native Method)
at java.io.FileOutputStream.<init>(FileOutputStream.java:179)
at java.io.FileOutputStream.<init>(FileOutputStream.java:131)
at oracle.sysman.emcp.util.FileUtil._copyFile(FileUtil.java:257)
... 11 more
15.09.2009 13:25:02 oracle.sysman.emcp.EMDBCConfig updateEmomsProps
KONFIG: Datei D:\ORACLE\product\11.1.0\db_1\sysman\config\emoms.properties.emca wird in D:\ORACLE\product\11.1.0\db_1\sysman\config\emoms.properties kopiert
15.09.2009 13:25:02 oracle.sysman.emcp.EMConfig perform
SCHWERWIEGEND: Fehler beim Aktualisieren von D:\ORACLE\product\11.1.0\db_1\sysman\config\emoms.properties
Weitere Einzelheiten finden Sie in der Log-Datei in D:\ORACLE\cfgtoollogs\emca\SAXMBS\emca_2009_09_15_13_15_52.log.
15.09.2009 13:25:02 oracle.sysman.emcp.EMConfig perform
KONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Fehler beim Aktualisieren von D:\ORACLE\product\11.1.0\db_1\sysman\config\emoms.properties
at oracle.sysman.emcp.EMDBCConfig.performConfiguration(EMDBCConfig.java:405)
at oracle.sysman.emcp.EMDBCConfig.invoke(EMDBCConfig.java:167)
at oracle.sysman.emcp.EMDBCConfig.invoke(EMDBCConfig.java:137)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:223)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:535)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1215)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:519)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:468)
the problem is Caused by: java.io.FileNotFoundException: D:\ORACLE\product\11.1.0\db_1\sysman\config\emoms.properties (access denied)
and when i try to deconfig this following occured
15.09.2009 13:30:28 oracle.sysman.emcp.EMConfig perform
INFO: Dieser Vorgang wird in D:\ORACLE\cfgtoollogs\emca\SAXMBS\emca_2009_09_15_1
3_29_13.log protokolliert.
15.09.2009 13:30:28 oracle.sysman.emcp.util.DBControlUtil stopOMS
INFO: Database Control wird gestoppt (dies kann etwas lõnger dauern) ...
15.09.2009 13:30:28 oracle.sysman.emcp.EMConfig perform
SCHWERWIEGEND: Can't find file D:\ORACLE\product\11.1.0\db_1\host\sysman\config\emoms.properties
Weitere Einzelheiten finden Sie in der Log-Datei in D:\ORACLE\cfgtoollogs\emca\S
AXMBS\emca_2009_09_15_13_29_13.log.
Die Konfiguration konnte nicht abgeschlossen werden. Weitere Einzelheiten finden
Sie in der Log-Datei in D:\ORACLE\cfgtoollogs\emca\SAXMBS\emca_2009_09_15_13_29
_13.log.
Can't find file D:\ORACLE\product\11.1.0\db_1\host_db\sysman\config\emoms.properties
With Windows Server 2003 I haven't any problems with the configuration of database control over cmd.
Any Ideas?Please run the following command
cmd>net start OracleDBConsolexxx(Assume sid name=xxx
cmd>set oracle_sid=xxx
cmd>emca (You will get all related keyword of emca)
Firstly you have to check that if you have created your database through DBCA then you have to drop old repository or recreate repository:
To drop (remove) the configuration files and repository for Database Console, run:
cmd>emca -deconfig dbcontrol db -repos drop
To recreate (remove & create) the configuration files and repository for Database Console, run:
cmd>emca -config dbcontrol db -repos recreate
(Please mark it helpful/Answered if you get solution)
Regards,
Suman -
Problem with Table control & i/o field
hi experts,
i have a problem with both table control and i/o field.
2 i/o fields and 1 table control.
i/o field are common for table control data.
when i am inserting ata from here to database table, table control data are inserted successfully, but from i/o field data are not inserted.
kind regards,
debendraHi
You must create data objects in your ABAP code having same name as your screen i/o fields. Now these objects will contain the data entered in your screen. Use these objects to insert data in your db table.
Hope this helps
Regards,
Jayanthi.K -
Problem with database control returning multiple rows as Array using Oracle
Has anybody using Oracle gotten a Database control that
returns multiple rows to work returning an array?
The only way I can seem to return multiple rows is by returning
a RowSet. Returning an array gives me a NullPointerException
(when called within a pageFlow). When calling a database control
that returns an array from a web service I get a
"java.sql.SQLException: ResultSet has no more data." error.
The samples using the pointbase database seem to work, but when I
converted the CustomerDBClient web service to use Oracle, it starts
failing on calling the database control that returns an array
with: "java.sql.SQLException: ResultSet has no more data."
Has anybody gotten this to work using Oracle?
I'm also having some problem returning an Iterator. It seems
to work when called from a web service, but returns nothing
if called from a page flow.
I'm using Oracle 8.1.7 and WebLogic 8.1.
EricDo you need a particular service pack installed to return an array of custom object?
I am getting a ResultSet contained no data error when trying.
Thanks,
-Thomas
"Robin Karlin" <[email protected]> wrote:
>
Eddie O'Neil <[email protected]> wrote:
All--
Unfortunately, returning an Iterator to a JPF (or JSP) from a
database control is broken in WLW 8.1, though it will work inside of
a
JWS or JCS.
There shouldn't be a problem with returning an array of objects out
of Oracle to the JPF, and if you need an Iterator specifically, youcan
wrap the array in an Iterator implementation.
Sorry for the inconvenience.
Eddie
Lenny wrote:
I have gotten it to work on Oracle using Array:)
However, I haven't gotten it to work on Oracle using Iterator:( Itis so
simple, but doesn't work:(
"Eric Dokken" <[email protected]> wrote in message
news:[email protected]...
Has anybody using Oracle gotten a Database control that
returns multiple rows to work returning an array?
The only way I can seem to return multiple rows is by returning
a RowSet. Returning an array gives me a NullPointerException
(when called within a pageFlow). When calling a database control
that returns an array from a web service I get a
"java.sql.SQLException: ResultSet has no more data." error.
The samples using the pointbase database seem to work, but when I
converted the CustomerDBClient web service to use Oracle, it starts
failing on calling the database control that returns an array
with: "java.sql.SQLException: ResultSet has no more data."
Has anybody gotten this to work using Oracle?
I'm also having some problem returning an Iterator. It seems
to work when called from a web service, but returns nothing
if called from a page flow.
I'm using Oracle 8.1.7 and WebLogic 8.1.
Eric
I get the same error that Eric reported when trying to return an Array
of objects.
It is really frustrating because I can't use much of the built-in control
logic
that WLW provides. All I did was create a data pool for Oracle and a
datasource.
I modified the sample app in C:\bea81\weblogic81\samples\workshop\SamplesApp\WebApp\callJavaControl
to point to that datasource and I get the error that Eric reports above.
Can
anyone help me out????
Thanks,
Robin -
Problems with volume control, built-in speaker on HP ProBook
Hi
Recently installed Arch on a HP ProBook 4330s. Initially sound was working perfectly, but now I'm having problems with the built-in speaker.
Using alsamixer in the terminal, I can independently control the volume of the headphone jack and the speaker, but it seems like the speaker is linked to the headphone volume instead of the speaker volume. Thus raising the speaker volume in alsamixer has no effect on the speaker itself, which only outputs sound as long as the headphone volume is raised and the loopback box is checked. This also means that the speakers cannot be muted while using headphones.
I installed pavucontrol to see if I could gain any insight, but trying to select "Speakers" as output port seems only to have an effect the volume sliders in alsamixer. So no settings in PulseAudio UI could solve my issue.
I have googled wide and far, but haven't found anything helpful. I tried reoading kernel modules snd-hda-intel, snd-hda-codec-idt, snd-hda-codec-generic, but nothing changed.
Below is some info of my system. Please let me know if I need provide more. Any help is appreciated.
aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
sysdefault:CARD=PCH
HDA Intel PCH, 92HD87B1/3 Analog
Default Audio Device
front:CARD=PCH,DEV=0
HDA Intel PCH, 92HD87B1/3 Analog
Front speakers
surround21:CARD=PCH,DEV=0
HDA Intel PCH, 92HD87B1/3 Analog
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0
HDA Intel PCH, 92HD87B1/3 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
HDA Intel PCH, 92HD87B1/3 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
HDA Intel PCH, 92HD87B1/3 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
HDA Intel PCH, 92HD87B1/3 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
HDA Intel PCH, 92HD87B1/3 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
hdmi:CARD=PCH,DEV=0
HDA Intel PCH, HDMI 0
HDMI Audio Output
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: 92HD87B1/3 Analog [92HD87B1/3 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
lspci | grep -i audio
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
pacmd list-sinks
1 sink(s) available.
* index: 20
name: <alsa_output.pci-0000_00_1b.0.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY FLAT_VOLUME DYNAMIC_LATENCY
state: IDLE
suspend cause:
priority: 9959
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 19.81 ms
max request: 3 KiB
max rewind: 344 KiB
monitor source: 25
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 1
configured latency: 20.00 ms; range is 0.50 .. 2000.00 ms
card: 0 <alsa_card.pci-0000_00_1b.0>
module: 6
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "92HD87B1/3 Analog"
alsa.id = "92HD87B1/3 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xd4a00000 irq 39"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "1c20"
device.product.name = "6 Series/C200 Series Chipset Family High Definition Audio Controller"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Intel CougarPoint HDMI"
alsa.components = "HDA:111d76d1,103c167e,00100205 HDA:80862805,80860101,00100000"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-output: Analog Output (priority 9900, latency offset 0 usec, available: unknown)
properties:
analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-speakers"
analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-headphones"
active port: <analog-output-speaker>
cat /proc/asound/cards
0 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xd4a00000 irq 39
Last edited by frwdrik (2014-12-08 00:49:52)I do have all those packages installed. The volume controls were working perfectly for about 3 week, but now suddenly they are not behaving as expected. I don't know of any changes I made to my system that could have caused this. I suspected it might be a problem with the drivers, so I tried to find the appropriate driver at https://www.kernel.org/doc/Documentatio … Models.txt
[frwdrik@frwdrik ~]$ cat /proc/asound/card0/codec#0 | grep -i codec
Codec: IDT 92HD87B1/3
But I cannot find this codec on that page.
Last edited by frwdrik (2014-12-29 13:57:44) -
Maverick causing problems with mission control
hi,
I have a early 2013 Mac book pro. I just upgraded to Maverick and I have been facing issues with mission control. When I swipe fingers up on touchpad to open Mission control, occasionally it lags. Basically the lagging is prevelant with swipe and pinch gestures on touchpad, the transitions are not smooth. Please help me fix it.
Thanks in advance,
KritarthI'm not sure that what I'm seeing is this same problem, but it's similar. And worse.
I have a MacBook Pro (Retina, 15-inch,Early 2013), and several times since I installed Mavericks both Mission Control and 4-finger swiping have stopped working completely. A restart always fixes them. They both fail at the same time--either both work completely, or both don't work at all.
I'm guessing there's a lurking Mavericks bug, somewhere.
Ed -
Problems with Promise controler
Hello, i have a problem with my motherboard MSI845Max2R. I have a HD maxtor 120Gb 133. If i connect the HD to the normal ide controler, the HD works OK but if i connect it to the promise, the array is created ok but then in the windows XP I can´t do a format because it stops at 6% or 8%. If i do a quick format, then when i copy data from another disk to the maxtor disk, all the system stops for two or three seconds and continue the copy, then the system stops and continue the copy, and this happens again and again. I have proved the HD in other computers and it works ok, in fact the hd works ok when i connect it to the ide bus in my computer.
is there someone that can help me?.
Thanks.not seen yours
dont use bios from another board at all
try maxtors faq,try there disk utility
note ms have a new f disk for big drives but im not sure what size change takes place -
Problem with brightness control on Toshiba Satellite R830 [SOLVED]
Ever since I've been using Linux on my Toshiba Satellite R830 laptop I had problems with the brightness setting after wakeup from sleep. The solution I had found was to use a custom xorg.conf setup. Actually I was creating a 20-intel.conf file in /usr/share/X11/xorg.conf.d/ with the following content:
Section "Device"
Identifier "card0"
Driver "intel"
Option "Backlight" "intel_backlight"
BusID "PCI:0:2:0"
EndSection
This worked until today. Now I realised that Xorg is somewhat ignoring this configuration file. I looked in the wiki and this suggested that any such config files should be in /etc/X11/xorg.conf.d/. I copied the file there and rebooted. I opened a terminal and checked the value of /sys/class/backlight/intel_backlight/actual_brightness. Modified the brightness with the Fn + F6/F7 and checked again and it was controlling these.
But after closing the lid and leaving it for a while, and wakeing up the PC the Fn +F6/F7 keys started controlling /sys/class/backlight/toshiba/ which never worked after sleep. Somehow on wakeup the custom config files are being ignored. It seems this is related to the upgrade to Gnome 3.16. I'm using linux-lts kernel.
How do I make Xorg use intel_backlight instead of Toshiba for brightness control?
Last edited by entodoays (2015-05-18 15:21:04)It seems that the culprit is /usr/lib/gnome-settings-daemon/gsd-backlight-helper. In this page: http://ubuntuforums.org/showthread.php?p=11910629 there's a procedure to patch the source file (for an older version). There's a section of the code like this:
/* available kernel interfaces in priority order */
static const gchar *backlight_interfaces[] = {
"nv_backlight",
"asus_laptop",
"toshiba",
"eeepc",
"thinkpad_screen",
"acpi_video1",
"mbp_backlight",
"acpi_video0",
"fujitsu-laptop",
"nvidia_backlight",
"samsung",
NULL,
Patching this file, eliminating the toshiba device from the preferred list and adding intel_backlight to it might solve the issue.
On another page, https://github.com/mate-desktop/mate-po … issues/135 they suggest another possible hack: changing the priority of device type
file plugins/power/gsd-backlight-helper.c
/* search the backlight devices and prefer the types:
* firmware -> platform -> raw */
path = gsd_backlight_helper_get_type (devices, "firmware");
if (path != NULL)
goto out;
path = gsd_backlight_helper_get_type (devices, "platform");
if (path != NULL)
goto out;
path = gsd_backlight_helper_get_type (devices, "raw");
if (path != NULL)
goto out;
Changing the order to firmware -> raw -> platform would solve the problem for me too.
Unfortunately I've never done any patching yet. How would I go about it?
Last edited by entodoays (2015-05-12 07:22:06)
Maybe you are looking for
-
Are accessible multiple signatures in Acrobat XI Pro possible?
I'd like to access two saved signatures in Acrobat XI Pro but I haven't found an easy way to do it in order to use them for signing documents. Is this possible? If so, how? If I haven't created a digital ID or a digital certificate are my signatures
-
Why don't I have QuickTime on my iPad?
I received a video as an attachment from a apple laptop but I can't open it up. All I get is a black diamond with a red slash through it.
-
New to Iphone ...purchased Music but don't see the charges in my bank account
I am a brand new iPhone 5 user; actually a brand new apple user. I purchased some music last night and this morning, but I don't see the charges showing as pending in my bank account. Do they not show up as pending? or do they accumulate for a few da
-
While updating to Android 4.0- i got a problem
my mobile is sony ericsson xperia Neo v- using PC Companion i tried to update from android 2.3 to 4.0 -while updating due to system hang up-I restarted my pc an disconnected the usb cable and again connected then now my phone is not working
-
Filter in list Item master Data
Hi all! i don't know why my database can't filter in Item master Data. This icon is grey. Can you help me!