Problem with Keyboard Commands in CS5

This is driving me up the wall and I seem to be the only one. Maybe somebody can help?
When I hit B for the brush tool or J for Spot Healing tool (doesn't matter what tool) it will
change to that tool for a couple seconds and then revert back to the tool I was using.
So, basically I can't change tools via keyboard commands.
I have to select the tool from the toolbar pallet.
And it's driving me nuts.
I have some custom keyboard commands (i.e, H for Healing brush and P for Patch tool)
and never had any problems.
I have reset all defaults. I have re-installed over the top. I have uninstalled and totally
started from scratch.
Things seemed to work OK after the fresh install. But once I added the Configurator panel,
the problem seemed to return. Only thing is, I've been using Configurator for a long time.
Obviously Conviguration version 2 not so long. But again, I used Configurator 2 wihout this
issue for some time.
I'm at a loss. Any ideas? Hopefully something simple I overlooking? But right now, working
in Photoshop is a real drag not being able to use keyboard commands.
Thanks,
Lance

OK well i guess i'm the only one experienceing this problem.
I should have added that there is also a delay when switching tools
while it desides to reject my request for a new tool and finally reverts back
to the previous one. but also a delay when i select the tool from the toolbar (via mouse).
CS5 as a whole seems to lag more on my system than CS4. Nik software plugins definetely
take longer to apply.
Lightroom 3 (while i'm at it) is also very slow when using the adjustment brush. brush away
and wait 2-4 seconds for anything to appear.
made sure my video card was up-to-date, but still no improvement in performance.

Similar Messages

Problems with 'df' command

Hello folks,
I'm having some problems with df command:
Output:
[nenemfromhell@myhost ~]$ df -h
Filesystem Size Used Avail Use% Mounted on
udev 999M 4.0K 999M 1% /dev
none 999M 4.0K 999M 1% /dev
/dev/sda8 133G 125G 2.0G 99% /media/DU
shm 999M 0 999M 0% /dev/shm
First: It doesn't show my root partition, but i can check it in gparted.
Second: /dev/sda8 is a NTFS partition that its size is 12GB
Thanks.
Last edited by nenemfromhell (2012-01-20 03:37:30)

Please include some detail as to how you solved the problem: https://wiki.archlinux.org/index.php/Fo … way_Street

Problems with site definition in CS5

I am trying to define a new site in DW CS5. When I enter the site information in the dialogue box I get the following message:
The spry assets folder is not inside the site. Please select a valid folder in your local site root.
The program automatically creates a folder for Spry assets but the error message still appears. I tried creating a new folder, but had the same results. I can't get past this screen. Why is this happening?

Randy,
Thanks for your prompt response. The problem is, if I am defining a new site, there are no pre-existing folders. I am calling my site "HF", so Dreamweaver automatically chooses "/Users/Aaron/Documents/HF/SpryAssets" as the default folder for spry assets. If I use the "browse for folder" icon, I can select another folder, but what else would I choose? (I tried choosing other folders, as well as creating a new folder, and neither worked).I'm really stumped!
Aaron
Date: Mon, 7 Jun 2010 09:19:07 -0600
From: [email protected]
To: [email protected]
Subject: Problems with site definition in CS5
I am trying to define a new site in DW CS5. When I enter the site information in the dialogue box I get the following message: The spry assets folder is not inside the site. Please select a valid folder in your local site root.
The program automatically creates a folder for Spry assets but the error message still appears. I tried creating a new folder, but had the same results. I can't get past this screen. Why is this happening?
Yes, it's an annoying bug. In the Site Definition dialog, go to the Advanced > Spry tab and use the "browse for folder" dialog to select your SpryAssets folder and it will fix the path for you.
HTH,
Randy
>

Keynote problems with keyboard shortcuts

Is anyone having problems with keyboard shortcuts not working with Keynote? Had this problem (and a host of others) since the upgrade to Mavericks and the latest Keynote.

Hello,
I can replicate all by problem number 1. Once the PDF loads, I can use the arrow keys to scroll up/down. All of the other problems you mentioned haven't been implemented.
You're certainly welcome to send feedback to Apple, though!
-Ryan

Problem with keyboard shortcut for font size in CC photoshop. The incriments sometimes work, i.e it goes 1 points at the time, but sometimes it goes 10 or even 20 points at the time. It seems to be very random. Any thoughts?

Problem with keyboard shortcut for font size in CC photoshop. The incriments sometimes work, i.e it goes 1 points at the time, but sometimes it goes 10 or even 20 points at the time. It seems to be very random. Any thought

You should ask in Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Problem with textboxes in Flash CS5

Hi, I am currently a Flash CS4 user and am trying Flash CS5 currently to see if it is worth it to pay for the upgrade. I currently have a problem with the use of textboxes in CS5 comparing with the previous version. When I try to change the texts of a text box using the following command in actionscript:
showlmytext.text = "My string: " +String(somevariable);
I would get weird misaligned text outputted in my textbox, which exact same code did not cause this problem on Flash CS4.
Can somebody please tell me what is the problem and how can I fix it?
Thanks

Hi Mario,
I hope you are well. My name is Sandi Langlotz.
At my job at greenidea.com, here in SF; I am having difficulty with using Hebrew in the trial download of CS5 Flash. Russ Mumford my boss has also contacted you regarding our problem.
Flash has a new TLF (Text Layout Format tool). My difficulty has to do with text boxes that are formatted for Right to Left text, with Hebrew selected as the Locale. We are pasting from Microsoft Word.
I hope that you may have a suggestion, a referral or a possible work around for me to try.
I have tried Adobe Customer Service several times to no avail.
Problem 1.
The first sentence below, (in blue) is correct format for Hebrew. Hebrew reads from R to Left.
When I paste the Hebrew text into the Flash animation, one of two things can happen;
the punctuation is cut off of the left side completely; or it is pasted in to the Right side of the Text box, (at the wrong end of the sentence).
I have tried to click the cursor into the left in order to insert the punctuation mark; this works sometimes but often I am unable to click in to manually correct the problem. I don't understand why it is cutting it off, or why I am sometimes unable to click into the left side and insert the punctuation.
Problem 2
In the second paste (the 2nd bold sentence), .CSO on the left side of the sentence is correct, as is the rest of the sentence.
When I paste the text into Flash from Word, Flash puts it in as reversed order. the word CSO. has the punctuation switched to the right (CSO.) Flash reverses the order of the other characters in the sentence also (like in the 2nd black sentence).
שולחן נקי הוא שולחן מאובטח.
שולחן נקי הוא שולחן מאובטח
מבוסס על רעיון ממגזיןCSO .
.CSOןיזגממ ןויער לע ססובמ
Adobe says it supports Right to Left text, but I can find no info on these two buggy problems. Do you have any idea what is wrong?
Thank you ahead of time for any info or referrals you may suggest.
Sandi Langlotz
שולחן נקי הוא שולחן מאובטח.
שולחן נקי הוא שולחן מאובטח
מבוסס על רעיון ממגזיןCSO .
.CSOןיזגממ ןויער לע ססובמ

Are there any problems with Lion and Adobe CS5 ?

I am wanting to upgrade to Lion but don't want to have the hassle of trying to fix any problems as I have heard some people had problems with earlier versions of Adobe Creative Suit and Lion and having recently moved I have no clue where my CS5 keys are so before doing so I want to know there will be no errors.
Peoples experiences would be appreciated and many thanks.

I have upgraded two Mac mini's which both have the Adobe Creative Suit Cs5 Acrobat, Illustrator, InDesign and Photoshop. I have had no issues regrding the upgrade, they just work.
However I do have two user interface issues. InDesign the keyboard page up, page down keys no longer work as expected, they simply jump to the next screen, the workaround is to use a trackpad for the left hand and use two finger scrolling.
The other is the arrow buttons in the vertical scroll bar no longer exist, so again the trackpad comes in for scrolling.
This applies for almost all software and the finder.

Anybody Have Problem with Keyboard Sticking

I have a new Iphone 5S. It was great for 2 weeks. Then the keyboatd began stick, sometimes. What I mean I may touch the same letter 3-5 times before it enters, or I toouch a letter and it becomes huge, sticks there then suddenly lets go and types that letter and more I never touched. The last thing it does is sometimes not space when I use the command, until I try 4-5 times.
Verizon has: Done a partial reset they promised wouldn't cause any problem for me but resetting wallpaper. The tech was soo wrong...Deleted ALL my settings and did not fix issue, Next they sent a refresh. Again no fix. Rhird, we deleted the phone, on the phone, and restored from icloud, ny syncing. Still has this intermittant problem
I loaded the Emjoi Keyboard when I traded from 4s to 5s. For some reason, that was only thing that wasn't there when I setup new phone. That never caused a problem on 4s , so can't imagine thats it.
The operative word is Intermitant here. I just don't get why it isn't doing the things I mentioned all of the time.
Welcome all ideas as Verizon will NOt give me a NEW phone, even tjough mine is not a month oold. I'll have to accept a refurbished one. That really upsets me.
ANY IDEAS?

Hey,
No problems with my Droid 3 and the keyboard. I have not seen any posts in our forums with anyone having that problem either. Sometimes you might can take a Q-tip with a little rubbing alcohol on the tip and clean around the key in question and you might get lucky. If you think it is some type of defect, you might want to contact customer support and they can assist you with your problem. Good luck.
Doc

Problem with shell commands and scripts from an Applescript Application

Hi-
I am fairly new to OSX software development. I am trying to build an application that creates a reverse SSH tunnel to my computer and starts OSXvnc. The idea is that my Mom or anyone else who needs help can connect to me without having to tinker with their firewalls.
There are plenty of resources on how to do this, and I have found them. What I have a problem with is the following.
I am building this application in Xcode as an Applescript application, because Applescript and shell scripting are the only forms of programming I know. I use an expect script to connect through SSH, and a "do shell script" for the raw OSXvnc-server application to allow screen sharing.
The problem is that when I click on the button to launch OSXvnc-server or the button to launch SSH, the application freezes until the process it spawns is killed or finishes. For example, I can set SSH to timeout after 60 seconds of no connection, and then the Applescript application responds again. I even tried using the ssh -f command to fork the process, but that doesn't seem to help.
I am also using "try" around each of the items.
What am I doing wrong? How can I make the buttons in my app launch SSH and OSXvnc-server without hanging the application while it waits for them to finish?
Thanks so much!

See here for an explanation of the syntax.
(20960)

870A Fuzion Power has problem with keyboard and mouse movement only in games.

Hey guys,
recently built a new system and chose to go with the 870A Fuzion Power mainboard, everything has gone very smoothly execpt for one problem, only when I play games like Crysis 2 ect the mouse seems to jolt around now and again and the keyboard decides to stop responding if I hold down the movement keys, and this is only in game not surfing the web for example. Now, I am using a wireless mouse and keyboard but I plugged in a PS/2 keyboard and the exact same thing happened. I've installed all of the drivers that came with this board and the drivers for the mouse and keyboard. Any of you guys ever had this sort of problem or know how to fix this?
Thanks.

I bought a new Macbook pro in june 2010, I didn't have any keyboard or mouse issues prior to upgrading to 10.6.4 supposedly this update was made to fix some issues with keyboard and mouse becoming unresponsive. For me the opposite happened. after the upgrade, my keyboard and mouse (trackpad) becomes sometimes partially unresponsive or totally unresponsive. the only way to solve the problem is by completely turning of the computer and turning back on.. granted it doesn't happen very often.. generally once every about 2-3 weeks but it is still annoying though..
I didn't have a chance to use the computer too much on the previous version (10.6.3) so I don't know if it is software related or hardware related.. any thoughts?
Message was edited by: msoued

Problem with keyboard and audio on Satellite L40

Hi everybody,
I just installed XP SP2 on my Satellite L40 (BTW thanx to all you that have helped me overcome the problems during this operation with your threads), but I have some problem with my keyboard. I have an azerty keyboard and after I installed xp, it worked as a qwerty, I repared it, now all my letters are working fine, but i have some problems with some symbols, such as @, !, _,if you understand me.
Could somebody help me???
I also have problems with my audio, in fact I have no audio at all, in control panel it says that no audio device is found.
I saw some threads that said that I should first install kb888111, and another likely thing, but i can't find the other one. I've downloaded the sound driver from the toshiba website; thanx for helping me in that field also.
bye

I have the same problem with sound...I have found hotfix kb888111 and I instaled that one...but when i wanted to start instaling sound driver a popup window say thet there is some error and can't continue with instaling sound driver...
I found hotfix kb888111 in this folder which i have downladed from toshiba site: english\sound driver\mshdqfe\win2k_xp\us\kb888111xps2....
i do not know what to do.....Does anybody else knows....

Problem with keyboard and mouse pm8m-v

I have gotten this pm8m-v from a freind who knew nothing about computers. He had problems with the keyboard and mouse not responding at start up or just freeze on him. So I check it out, called MSI and even sent it to them, they claimed that there was nothing wrong with the board. So here are the specs of the computer now:
pm8m-v motherboard
2-256MB memory PC-2700 DDR 333Mhz
intel P4 2.6GHz
codegen power supply 300W
gateway CDW
western digital 40 harddrive
the rest is on board stuff
the problem is still there and it is driving me crazy, can you please help?

I had the same problem with the PM8M-V, today as a matter of fact, and I kept getting locked up at the point where I had to hit enter to load the WinXP CD to setup the system. After finding this topic I tried a different keyboard. The one that was being used was a Kennsiington PS2 cheapo, I swapped it for a Microsoft (one of those ergonomic styles and I've had it for a long time) Keyboard PS2, and the problem went away. I'm typing on the Kennsington right now, so it's fine just wasn't liked by the PM8M-V for some reason.

Problems with refine edge in CS5-no longer working properly?!

Hi all, just wondered if anyone has experienced this bizarre problem and if so how they went about fixing it or changin the settings! (i may have done something to photoshop for it not to work properly!!!)
Basically, i have got CS5 and was very excited to find the refine edge tool.... made cutting out people real easy and loved it.... however, for some reason the refine edge is not working anymore. Everytime i try to refine the edge using the refine edge tool it isnt selecting any fine details of the cut. It seems to be erasing the image with a low opacity making the selection very blurred?!
Hopefully you can see from the very quickly put together example that the refine edge tool is taking pixels out if her nose, chin, jumper neck and jumper! Any one know how to prevent this from happening?
Thanks! Matt

I am having the same problem with the refine edge tool. It seems to work the exact opposite of what I was expecting.
The above two images are before and after using the tool to refine the edge. As you can see from the picture without the mask view, the selection actually got smaller after I tried to add to it. When I use the other tool to erase an edge, as soon as I release the mouse button, the portion I tried to remove reappears as it was before. This has never worked properly for me. Also, I have tried outputting in several different ways.
As for the questions posed: The app and OS are up to date. I am the only user on my computer, so I'm not sure what using another user would accomplish. I will mention that I'm using Windows 7, not Mac. I'm really hoping there is a setting I have wrong somewhere.

Problem with issuing command via CustomScriptExtension

I am trying to issue a CustomScriptExtension command to an Azure virtual machine from within my C# application. The CustomScriptExtension is installed in the VM and working. I verified this by issuing a test command via PowerShell. Essentially I am trying
to execute what would be the equivalent to the PowerShell command Set-AzureVMCustomScriptExtension, but in code.
Below is the code segment that I am having problems with:
ComputeManagementClient client = new ComputeManagementClient(AzureSessionInfo.CloudCredentials);
IList<ResourceExtensionReference> extReferences = new List<ResourceExtensionReference>();
IList<ResourceExtensionParameterValue> extParamValues = new List<ResourceExtensionParameterValue>();
string account = "{\"storageAccountName\":\"" + AzureSessionInfo.StorageAccount + "\",\"storageAccountKey\": \"" + AzureSessionInfo.StorageAccountKey + "\"}";
string scriptfile = "{\"fileUris\": [\"" + "https://teststorageaccount.blob.core.windows.net/testcontainer" + "\"], \"commandToExecute\":\"powershell -ExecutionPolicy Unrestricted -file " + "ScriptName.ps1" + "\"}";
byte[] bytes1 = System.Text.Encoding.UTF8.GetBytes(account);
bytes1 = System.Text.Encoding.UTF8.GetBytes(account);
string ScriptPrivateConfig = Convert.ToBase64String(bytes1);
byte[] bytes2 = System.Text.Encoding.UTF8.GetBytes(scriptfile);
bytes2 = System.Text.Encoding.UTF8.GetBytes(scriptfile);
string ScriptPublicConfig = Convert.ToBase64String(bytes2);
ResourceExtensionParameterValue extRef_Parameter1 = new ResourceExtensionParameterValue()
Key = "CustomScriptExtensionPrivateConfigParameter",
Value = ScriptPrivateConfig,
Type = "Private"
ResourceExtensionParameterValue extRef_Parameter2 = new ResourceExtensionParameterValue()
Key = "CustomScriptExtensionPublicConfigParameter",
Value = ScriptPublicConfig,
Type = "Public"
extParamValues.Add(extRef_Parameter1);
extParamValues.Add(extRef_Parameter2);
ResourceExtensionReference extRef_CustomScript = new ResourceExtensionReference
Name = "CustomScriptExtension",
Publisher = "Microsoft.Compute",
Version = "*",
ReferenceName = "CustomScriptExtension",
ResourceExtensionParameterValues = extParamValues
extReferences.Add(extRef_CustomScript);
AzureSessionInfo.CloudServiceName = "CS1000001";
AzureSessionInfo.VMName = "CS1000001";
AzureSessionInfo.ImageFamilyName = "Windows Server 2012 R2 Datacenter";
client.VirtualMachines.Update(AzureSessionInfo.CloudServiceName,
AzureSessionInfo.VMName,
AzureSessionInfo.VMName,
new VirtualMachineUpdateParameters
RoleName = AzureSessionInfo.VMName,
ResourceExtensionReferences = extReferences
I receive the following error message back from the call:
BadRequest: Invalid extension reference parameter value in JSON configuration data for the Role: CS1000001, Reference name: CustomScriptExtension.
I could only find very little documentation on this. Any help would be appreciated.

Thanks Mekh... after many hours of researching and trial/error, I figured it out.
The MSDN article I used previously led me down the wrong path. (see article here: http://msdn.microsoft.com/en-us/library/azure/dn781373.aspx). This may work for RESTful calls but not for .NET API calls.
The part of the code that was hurting me was where the command strings (account and
scriptfile) were being converted to Base64 encoding. This is NOT correct for .NET calls. Once I removed that, everything worked fine.
I came across this after researching the same commands used by Linux scripts. They don't convert to Base64 either so I wonder why this is included in the documentation at all.
In either case, I figured it out, but the documentation is very poor in this area (or all together non-existent). I don't even see where it is documented as to which JSON parameters names are supposed to be used, or even that JSON is required.
Also, related to the Update command, if you are truly "updating" the config, you must include everything about the original config (whether it changed or not) along with the changes you want to make. If not then you will undo ALL but the changes
you issued via the command.

Problem with runas command. Elevation error

Running on Win 8.1 Pro I'm facing a problem with runas.
What I'm trying to do is launch an mmc as my domain admin account.
Therefore I type this command from an elevated cmd (Right-click "Run as Administrator"):
runas /user:Contoso\MyDomainAdmin /noprofile mmc
This worked like a charm in Windows 7, and on my Win81Pro client it yields:
RUNAS ERROR: Unable to run - mmc
740: The requested operation requires elevation.
The account I'm logged in with, is local admin, and the UAC slider is set in the bottom.
In the eventviewer, I only see some special logons where my normal account is trying to impersonate my domain admin account, and the next event, the domain admin's session is destroyed.
If this is by design, how would I then run mmc as my domain admin and at the same time avoid its credentials being stored on the local machine?
Thanks in advance!

yes, you need to be local admin to be able to elevate!
I've tested this on a system here and I reproduce the issue you encountered. Some investigation showed running a program that requires elevation using runas is not possible http://msdn.microsoft.com/en-us/library/bb756922.aspx
MCP/MCSA/MCTS/MCITP

Problem with Keyboard Commands in CS5

Similar Messages

Maybe you are looking for