Problem with l-connector, can't update firmware

hello everyone!!
I've some problems to charge my battery since I've bought a L-connector.
Surfing in the net i realized the firmware has to be updated.
But when trying to update it, I get the message: 'This computer does not need this update.'
The firware version is:
Model Name:          MacBook
  Model Identifier:          MacBook1,1
  Processor Name:          Intel Core Duo
  Processor Speed:          2 GHz
  Number Of Processors:          1
  Total Number Of Cores:          2
  L2 Cache:          2 MB
  Memory:          2 GB
  Bus Speed:          667 MHz
  Boot ROM Version:          MB11.0061.B03
  SMC Version (system):          1.4f12
  Serial Number (system):          SystemSerialNumb
  Hardware UUID:          00000000-0000-1000-8000-0016CBCEFBAD
in apple is writen MB11.0061.B03 (EFI 1.1)
can someone help me please?
thank you so much

sorry I'll provide more info.
I pressed the wrong button when i selected the type of laptop.
So, the first connector (the old one) was working perfectly but then the wire broke up and i've bought the new charger l-connector. Since then, the light is red but the battery is not charging at all but the pc still working.
An Apple store told me to updated the firmware, which is in the website
MacBook (13-inch)
MacBook1,1
MB11.0061.B03 (EFI 1.0)
1.4f12 (SMC 1.1)
i download it, but then i get the message showed above.
Anyway, yes is the correct charger for my mac (65 watt).
should i provide something more?

Similar Messages

  • HELP!! No problem with Itunes, but can't update or mount nano

    I've searched these discussions forever and tried myriad of suggestions and still nothing works. Here's the problem
    My nano charges fine and Itunes recognizes it and updates the music fine. My nano plays fine. However, my nano never stays in disk mode. I can change the option and Itunes updates it. I disconnect the nano, reconnect it and it shows up in My Computer for about 30 seconds, and then immediately disappears. I've noticed that it shows up in My Computer only until Itunes recognizes it. As soons Itunes recognizes the nano, it disappears from My Computer. Also, as soon as Itunes recognizes it, it immediately looses the "disk mode" and I have to turn the option back on again.
    This causes me to be unable to mount the nano and I can't update or restore the nano using the updater, so I'm still on version 1.1.
    I've tried the hard reset of the nano; still the same problem. I've tried using disk management to format or change letters, but it disappears as a drive before I can get it started. I am dumbfounded.
    ANY OTHER SUGGESTIONS?????
    Nano 2 GB   Windows XP  

    Well, your post didn't help but I had an "ah hah" moment and finally got it working. I set the nano in disk mode again, and disconnected, but this time when I reconnected I had the updater program ready to be clicked on and My Computer open. As soon as the nano showed up in My computer, I immediately hit the Updater program and was finally able to get the nano to mount. When it finally mounted, I was able to format the nano from My Computer, and when that was done was able to restore. NOw it works again!

  • Can't download anything from app store or itunes. everytime i try to install an app i get "there is abilling problem with a previous purchase. please update ur payment method". i have recently changed my address and visa debit card. please help

    can't download anything from app store or itunes. everytime i try to install an app i get this error "there is a billing problem with a previous purchase. please update ur payment method". i have recently changed my visa debit card and home adress and when i make these changes i still get the same error.
    will u please help me out?

    Are you listing the billing address for the card correctly? The address in the iTunes/MAS account must match the address on your bill exactly.

  • Hi i have a problem with my iphone 3gs. i updated the software to ios 6 but now when trying to activate the phone it comes up with a message saying that the activation server is currently unavailable, also it always says no sim! what can i do?

    i have an activation problem with my iphone 3gs. i updated the software to io6 using itunes but now the phone will not complete activation because it keeps saydin the activation server is not available and to re try later. ive been trying for 6 hours but it still wont activate. if i try using itunes then it sayd no sim inserted when there is one inserted, what can i do?

    You are right, but how could i send it to Apple? when the phone company first replaced my iphone they had in stock alots of iphones and they just sent mine back to Apple and gave me a new one, so all i did is to give them my phone, but now how could i sent it to Apple? and i cant send it by myself, and the store wont do that, its a lost for them.. so sending it to Apple wasnt an option from the begining.
    and for the record, i dont think the store where i bought it is an authorized shop.. its just a store who boughts phone's from Apple in a low price and sells it in much more money..

  • Since the most recent Firefox update 3.6.8 by banking institution no longer shows as having a secure encrypted connection, however, my bank assures me all is well with their certificates and that is a problem with the new Firefox browser update, can you g

    Since the most recent Firefox update 3.6.8 my banking institution no longer shows as having a secure encrypted connection, however, my bank assures me all is well with their certificates and that is a problem with the new Firefox browser update, can you give me some idea why it is doing this?
    == This happened ==
    Every time Firefox opened
    == Right after the new Firefox update

    Hello Anne.
    Can you please try it in a new (temporary) Firefox profile and see if the issue is still present? See [http://support.mozilla.com/en-US/kb/Managing+profiles this article] to know how to create a new Firefox profile. Please report back the results.

  • HI pls i am having problem with my iphone4s since i updated to 8.2 i can't check balance of my account and secondly if somebody call me it is indicating no with out name pls what is the solution

    HI pls i am having problem with my iphone4s since i updated to 8.2 i can't check balance of my account and secondly if somebody call me it is indicating number  with out name pls what is the solution

    When you have kernel panics, the pertinent information is in the panic report.
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar.
    There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.

  • Can't update firmware for Ipod Touch on my PC

    I have a 1st gen Ipod touch & windows xp. I have the latest itunes.
    It will not let me update the firmare, but I can sync fine.
    To update the firmware, I give it to my husband and he can do it from his computer. Then I can sync with no problems. It's just the updating firmware that causes the ipod to crash (1602 error, but occassionally other numbers).
    We thought it might have been that I didn't have USB 2 ports, so I bought a USB 2, 4 port card, and my husband helped me install it. Unfortunately this did not solve the problem and it still wont let me update. I thought perhaps because the usb 2 card came with driver disks, it might need a driver. But I checked the driver disk and it contained drivers for strange things I didn't have. Then I checked the internet and it said that with xp the drivers should be automatic with windows update, and mine is all updated, I checked.
    I've checked my devices manager list, and the list only contains one "enhanced" usb port, even though the card I have has 4 ports, but maybe I am not understanding how the devices list works.
    Just to clarify, have had the same problem with 2 ipod touches. My orignal one got a cracked screen (one crack so covered by warranty) and I received the replacement ipod touch yesterday, and I still could not update the firmware on my PC. My husband had to do it on his PC (vista).
    Thanks in advance for any suggestions. I really would like to be able to update the firmware on my own PC, it's geting extremely annoying.

    Because I cannot sync my music to my iPhone without updating on my PC which has all my iTunes. Where should I have posted my question to get the help I need?

  • Zen Micro firmware CIRCLE -Can't update firmware w/out driver, can't update driver w/out firmwa

    Hi,
    I know lots of peopl are having the same problem. I have a Zen Micro 5Gb. I have previously updated the firmware to the plays for sure (about 2 years ago) and it's been fine.
    The device had had the hard dri've replaced after it failed, and I need to reload the firmware. I have all the files, I've read all the FAQ and support I used last time (I keep everything) and my notes from 2 years ago say it was easy.
    However. Not now. I figure WMP caused a lot of problems. Right - got that out the way. Fresh installs of XP SP2 is the way to go.
    I have also followed the instructions here:
    http://http://forums.creative.com/showthread.php?t=3478
    But, I keep going round in circles. Can't update firmware without driver, can't update driver without firmware.
    Any driver install I try asks me to connect the device to complete the installation, but, it won't recognise the device because there is no firmware. I try to upload the firmware, and it says there is no device (because there is no driver).
    I have tried multiple machines, with SP2 installed and only WMP9 (never had WMP0).
    I have tried USB , 2, hubs, front ports back ports, again on multiple machines.
    I've even used an XP install on VMware on a MAC (This was the closest to success).
    On the Mac, The player was recognised even in its flash problem state and I could actually start the firmware update. However, it failed to complete successfully.
    Has anyone actually managed to do a firmware update on n old Zen using a 2008 PC? Please help!

    If your player had PlaysForSure firmware, you'll need to download a PlaysForSure firmware version. That should resolve your issues since PlaysForSure does not use a Creative driver but rather a nati've Windows driver. But you will need to have WMP0 installed, WMP9 does not support PlaysForSure.

  • Problem with "SELECT...FOR UPDATE OF..." and "POST command" combination

    Problem with "SELECT...FOR UPDATE OF..." and "POST command" combination
    Problem in committing transactions in Multiple Forms (Oracle Forms) with POST built-in command:
    Consider that the following statements are written in WHEN-WINDOW-CLOSED trigger of a called form.
    Statements in called form (Form name: FORM_CHILD):
    go_block('display_block') ;
    do_key('execute_query') ;
    -- Data from table_b will be populated in this block, based on the value of COLUMN_1 obtained
    -- from TABLE_A.
    -- Example: If the value of COLUMN_1 is 10, then all the matching records from TABLE_B, which
    -- are inserted with value 10 in TABLE_B.COLUMN_1 will be fetched and shown here.
    if user_choice = 'YES' then
    commit ;
    else
    rollback ;
    end if ;
    Statements in calling forms:
    There are two calling forms having following statements and it is going to call the above said called form.
    CALLING FORM 1
    Statements in KEY-COMMIT trigger:
    post;
    call_form(form_child, no_activate) ;
    Statements in ON-INSERT trigger:
    select column_1
    from table_a
    for update of column_1
    where column_2 = 'X' ;
    update table_a
    set column_1 = column_1 + 1
    where column_2 = 'X' ;
    insert into table_b ...;
    insert into table_b ...; Statements in KEY-COMMIT trigger:
    post;
    call_form(form_child, no_activate) ;
    CALLING FORM 2:
    Statements in ON-INSERT trigger:
    select column_1
    from table_a
    for update of column_1
    where column_2 = 'X' ;
    update table_a
    set column_1 = column_1 + 1
    where column_2 = 'X' ;
    insert into table_b ...;
    insert into table_b ...;
    insert into table_b ...;
    Our understanding:
    Assume that both the forms are running from two different machines/instances, issuing commit at the same time. In this case, forms will start executing the statements written in ON-INSERT trigger, the moment POST command is executed. Though the commit is issued at the same time, according to oracle, only one of the request will be taken for processing first. Assume that calling form 1 is getting processed first.
    So, it fetches the value available in COLUMN_1 of TABLE_A and locks the row from further select, update, etc. as SELECT...FOR UPDATE command is used (note that NOWAIT is not given, hence the lock will be released only when COMMIT or ROLLBACK happens) and proceed executing further INSERT statements. Because of the lock provided by the SELECT...FOR UPDATE command, the statements in calling form 2 will wait for the resource.
    After executing the INSERT statements, the FORM_CHILD is called. The rows inserted in to TABLE_A will be queried and shown. The database changes will be committed when user closes the window (as COMMIT is issued in its WHEN-WINDOW-CLOSED trigger). Then the SELECT...FOR UPDATE lock will be released and calling form 2's statements will be executed.
    Actual happenings or Mis-behavior:
    Calling form 2 starts executing INSERT statements instead of waiting for SELECT...FOR UPDATE lock. Also, the value selected from TABLE_A.COLUMN_1 is same in both the calling forms, which is wrong.
    The rows inserted into TABLE_B are having similar COLUMN_1 values in calling form 2 and they are fetched and shown in the called form FORM_CHILD.
    Note that in calling form 2 also POST only is issued, but the changes posted there are accessible in calling form 1 also, which is wrong.
    Kindly suggest us as to how to fix above problem. It will be much use, if you can send us the information regarding the behavior of Oracle Forms POST built-in also.
    Our mail ID: [email protected]
    Thanks a lot in advance.

    You have several problems:
    1. On-Insert will ONLY run if you have created a new record in a base-table block. If you haven't done that, then the POST command will not cause it to run.
    2. Select for update without a "no wait" will lock records for the first form, but when the second form tries this, it will hit the ORA-00054 exception, and will NOT wait. The only way you could make it wait is to issue an UPDATE sql command, which is not such a good way to go.
    All POST does is issues SQL insert or update commands for any changes the user has made to records in a form's base-table blocks, without following with a Commit command.
    Also understand that Commit is the same as Commit_Form, and Rollback is the same as Clear_Form. You should read up on these in the Forms help topics.

  • I am having problem with my sound, after i updated to ios 6, apple please help

    i am having problem with my sound, after i updated to ios 6, i can hear music with headphone only, apple please help

    Try going into your settings and 'reset all settings'
    You will need to retweak your device but it's been said to help with sound issues.

  • Is anyone having problems with OS 10.5.7 update?

    I have a Tascam US-122 (older unit), and all was fine until the OS 10.5.7 update. Now, I get a signal from my US-122 going in that I can see on the system prefs panel, but no sound coming out of my monitors. ALL other audio devices DO come out of the monitors just fine.
    I have looked at every setting possible, and nothing.

    Yes, the US-122 is a usb interface. I have been using it for several years now.
    I have had no problems until this last OS update, which also included an iTunes update that I have heard folks are having burning problems with.
    I can SEE the signal going in (in the sys prefs meters), as well as in LE's meters, but no sound comes out of my monitors. Yet I CAN play songs in iTunes and pre-recorded tracks in LE7 and GB, without problems at all, as well as any other audio from online sources and from the OS, like alerts, etc. It is only audio straight from the US-122 that does not make a sound.
    I find it so odd that the OS Sys prefs show a signal, yet no sound is present, while all other apps produce sound as usual.
    I have repaired permissions, and have reset SOUND and AUDIO/MIDI setting severals times.
    I USED to be able to play guitar through my Vox ToneLab, connected directly to the US-122 into the Mac, whether I was using LE7 or GB or neither. Now I get NOTHING from it at all (aside from the OS meters), no matter what.
    I'd suspect a cable if not for the signal in the meters, and the sound from every other audio app, including pre-recorded LE7 & GB stuff.
    I have had minor problems in the past, but never anything like this.

  • Is anyone having problems with i message after newest update?

    since i updated my iphone to the newest 5.1 my imessage isnt working properly.. it will sometimes let me imessage certain people and other times not i was wondering if anyone is having the same problem or knows how to fix it. I have the iphone 4s but i am in europe and i am basically using it as an ipod because it doesnt currently have service. This problem is happening when i am connected to wifi so the imessaging should work...
    any thoughts?

    Yes, the US-122 is a usb interface. I have been using it for several years now.
    I have had no problems until this last OS update, which also included an iTunes update that I have heard folks are having burning problems with.
    I can SEE the signal going in (in the sys prefs meters), as well as in LE's meters, but no sound comes out of my monitors. Yet I CAN play songs in iTunes and pre-recorded tracks in LE7 and GB, without problems at all, as well as any other audio from online sources and from the OS, like alerts, etc. It is only audio straight from the US-122 that does not make a sound.
    I find it so odd that the OS Sys prefs show a signal, yet no sound is present, while all other apps produce sound as usual.
    I have repaired permissions, and have reset SOUND and AUDIO/MIDI setting severals times.
    I USED to be able to play guitar through my Vox ToneLab, connected directly to the US-122 into the Mac, whether I was using LE7 or GB or neither. Now I get NOTHING from it at all (aside from the OS meters), no matter what.
    I'd suspect a cable if not for the signal in the meters, and the sound from every other audio app, including pre-recorded LE7 & GB stuff.
    I have had minor problems in the past, but never anything like this.

  • TS3899 iPad mail account says problem with 'ssl settings' - can you help me?

    iPad mail account says problem with 'ssl settings' - can you help me?

    The 4Gs hardware, only 256 MB of RAM, prohibits updating beyond 6.1.6.
    Starting when iOS 7 was released, Apple now allows downloading the last compatible version of some apps (iOS 4.2.1 and later only)
    App Store: Downloading Older Versions of Apps on iOS - Apple Club
    App Store: Install the latest compatible version of an app
    You first have to download the non-compatible version on your computer. Then when you try to purchase the version on your iPod you will be offered a compatible version if one exists.

  • Can not update firmware on Officejet Pro 8610

    Can't update firmware on Officejet Pro 8610, Hp update site shows available firmware update needed, disabled firewall, shut off wireless, run program, window for update appears, but checkbox greyed out. I've talked to HP Tech, He was positive newer firmware was available, I've tried starting in safe mode w/networking, disabled, MS Security essentials turned off,etc. Have Dell Dimension, excellent running, Windows 7 Home Premium, Xfinity cable network modem (very fast), I'm getting frustrated.
    Does anybody have a suggestion? Thanks, Jim

    Hi @jwhite8150 , and welcome to the HP Forums!
    I see you're having issues updating your firmware.  I would like to help!
    Before we start I have a request. 
    Press Setup on the front panel of the printer, and select Reports.  In the reports menu select Print Status report.  On that report, please let me know what firmware version is listed.
    Thanks!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • HT1476 my iPhone 4 will no longer charge. It is also not recognised in iTunes. There seems to be a problem with the connector slot. I've tried other cables and other computers/plugs but the connection is not being made. Any suggestions?

    my iPhone 4 will no longer charge. It is also not recognised in iTunes. There seems to be a problem with the connector slot. I've tried other cables and other computers/plugs but the connection is not being made. Any suggestions?
    It seems to me that the connection port is faulty.
    George

    Looks like a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...

Maybe you are looking for